High-quality replacement seat belt intended for professional workshops and experienced DIY mechanics who maintain Stellantis MPV interiors. This center rear belt restores proper occupant restraint and is commonly sought under the part codes 14008311XX or 8974A0. The black FXX webbing integrates with the vehicle’s original mounting points and trim for a factory-like appearance and reliable performance.

Technical Information

• Manufacturer: Citroën / Peugeot (Stellantis)
• Model: Citroën C8, Peugeot 807
• Product Codes: 14008311XX, 8974A0
• Other Numbers: Color FXX – Black; Position: Center Rear Seat, Second Row (behind driver and front passenger)

Installation Recommendations

• Follow Safety Procedure: Disconnect the negative battery terminal and wait the manufacturer-recommended time before working near SRS components or pretensioners.
• Access: Remove interior trim panels around the B-pillar and rear seat base to expose the belt retractor and anchor bolts.
• Removal: Unbolt the lower anchor and seat belt mounting hardware, then disconnect any electrical connector if a pretensioner is present.
• Fitting: Fit the new belt assembly to the original mounting points. Tighten all bolts to the manufacturer torque specification and secure any electrical connectors for pretensioners.
• Checks After Fitment: Verify smooth retraction and extension, confirm the locking mechanism engages under a sharp pull, and ensure buckle latches reliably. Refit trim panels without pinching the webbing.

Why This Part Fails Most Often

• Wear And Abrasion: Frequent use, contacts with seat edges or rough surfaces cause webbing fraying and weakening over time.
• Contamination: Dirt, grit, and moisture can impede smooth retraction and accelerate wear of the mechanism.
• Pretensioner Deployment: Deployment in a collision renders the belt assembly unusable and requires replacement.
• Corroded Or Damaged Mountings: Corrosion or impact damage to anchor bolts and brackets can compromise belt function.
• Retractor Jamming: Internal spring or locking mechanism failure due to age, debris, or mechanical fault prevents proper operation.

This seat belt is a direct-fit solution for the specified center rear position on Citroën C8 and Peugeot 807. Because these belts are often searched by their product codes, listing 14008311XX and 8974A0 increases findability for workshops and DIYers looking for a reliable replacement.

This genuine-style rear seat belt is a direct-fit replacement for Citroën C8 and Peugeot 807 models, suitable for both right- and left-hand rear seating positions. Ideal for professional workshops and DIY mechanics, the belt restores occupant restraint performance and interior appearance. Commonly searched by part numbers 14008311XX, 14844310XX or 8974RP, this assembly is a practical spare part when a webbing, retractor or buckle is damaged or after collision deployment.

Key Features

• Direct fit for Rear Right And Rear Left Seats On Citroën C8 And Peugeot 807
• Color FXX (Black), Matching Factory Interior Finishes
• Complete Assembly: Webbing, Retractor And Buckle (depending On Vehicle Specification)
• Supplied With OEM-Style Fixing Points To Replace Worn Or Damaged Units

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Citroën C8; Peugeot 807
• Product Codes: 14008311XX; 14844310XX; 8974RP
• Other Numbers: Color Code FXX – Black

Installation Recommendations

Installation should be performed by a qualified technician or an experienced DIY mechanic following manufacturer safety practices. General steps:

• Disconnect The Battery And Wait At Least 10 Minutes Before Starting Work To Reduce Risk From Airbag System Capacitors.
• Remove Interior Trim Panels To Access Seat Belt Anchor Points And Retractor.
• Unbolt The Old Assembly From Its Anchors And Carefully Disconnect Any Electrical Connectors If The Belt Includes A Pretensioner Or Sensor.
• Fit The New Belt Assembly Ensuring The Webbing Is Correctly Routed Through Guides And Retractor Is Properly Seated.
• Tighten Fasteners To The Manufacturer’S Specified Torque (Refer To Vehicle Repair Manual).
• Check Free Movement Of The Webbing, Correct Locking Under Sudden Pull, And Secure Latching Of The Buckle.
• Reassemble Trim Panels And Perform A Functional Check With Doors Closed.

Why This Part Fails Most Often

Seat belts typically fail or require replacement for the following reasons:

• Wear And Abrasion Of The Webbing Due To Long-Term Use Or Foreign Objects (Sharp Edges, Sand, Pet Claws).
• Contamination Or Corrosion Causing Retractor Jamming Or Sluggish Operation.
• Pretensioner Activation During A Collision (Pretensioners Are Single-Use And Must Be Replaced After Deployment).
• Buckle Failure From Dirt, Spills Or Mechanical Damage Preventing Secure Latching.
• Anchor Bolt Corrosion Or Thread Damage Compromising Mounting Integrity.

Practical Tips

Always Compare The Supplied Product Codes With The Existing Unit On The Vehicle Before Installation. Inspect Webbing For Cuts Or Chemical Damage And Verify The Retractor Locks Under A Sharp Tug. Replace The Entire Assembly If Any Component Shows Signs Of Impact Or Irreversible Damage.

Compatibility And Search Tips

Search Engines And Spare-Part Catalogs Often Return This Item Under The Part Numbers 14008311XX, 14844310XX Or 8974RP. Use These Codes Alongside Vehicle Model Names (Citroën C8, Peugeot 807) To Improve Findability.