Premium turbo air intake pipe designed for PSA 2.0 HDI engines (RHR). Originating from a Peugeot 807 RHR vehicle and compatible with Citroën C8 and related models, this component ensures efficient airflow to the turbocharger to support consistent boost and engine performance.

Fitment & Compatibility

Direct fit for vehicles equipped with the 2.0 HDI RHR engine. Typical applications include Peugeot 807 and Citroën C8. Verify fitment using OEM product codes 0382HE and 0382H2 and engine code RHR before installation.

Function

This pipe channels intake air into the turbocharger, maintaining pressure and flow required for correct turbo operation. A sound, properly sealed pipe prevents boost loss, improves throttle response and reduces the risk of intake leaks or turbo performance issues.

Signs It Needs Replacement

• Noticeable loss of boost or reduced acceleration
• Hissing, whistling or unusual intake noises
• Visible cracks, splits or soft spots in the pipe
• Oil contamination inside the hose or around joints
• Related fault codes for boost or intake pressure

Replacement Guide

Intended for experienced mechanics or competent DIYers. Safely depressurise the intake system, disconnect any sensors or clamps, loosen hose clamps and remove the old pipe. Inspect adjacent hoses, intercooler connections and clamp condition. Install the new pipe with correct alignment and secure all clamps to manufacturer torque guidance. After fitting, check for leaks at idle and perform a road test to confirm restored boost and response.

Common Failure Causes

Typical causes include age-related material degradation, heat cycling, oil contamination from turbo seals, loose or corroded clamps, and mechanical damage. Regular inspection during major services helps detect wear before it affects performance.

Technical Information

Manufacturer: PSA Citroën Peugeot
Model: Citroën C8, Peugeot 807
Product Codes: 0382HE, 0382H2
Other Numbers: RHR (engine code)

Choose this direct-fit intake pipe to restore reliable turbocharger airflow and engine responsiveness. Always confirm compatibility with your vehicle identification and inspect clamps and sealing surfaces during installation.

Turbo air intake connection pipe for PSA 2.0 HDi engines (engine codes RHR, RHK). This inlet pipe provides a sealed and stable route for intake air from the airbox/MAF sensor to the turbocharger. Proper intake plumbing is essential for engine performance, fuel economy and turbocharger durability.

Symptoms Of Failure

Common signs of a damaged or leaking intake pipe include loss of power under load, audible sucking or whistling from the engine bay, increased smoke, oily residue at the joint and illumination of the engine management light. Replacing a faulty pipe typically restores turbo response and stabilises boost pressure.

Causes And Durability

Original plastic pipes can become brittle with age, crack, deform or lose sealing ability as O-rings and sealing beads wear. Heat cycles, oil contamination and mechanical stresses accelerate deterioration leading to boost leaks and reduced engine performance.

Installation

Fitting is straightforward: remove the clamped/bolted pipe between the airbox/MAF and the turbocharger and install the replacement. Inspect and, if necessary, replace O-rings and clamps to ensure optimal sealing. Clean mating surfaces, seat the pipe without tension and tighten clamps evenly. After installation check for leaks at idle and during light acceleration.

Compatibility And Fitment

Compatible with 2.0 HDi engines carrying RHR or RHK codes, commonly fitted to larger models such as the Citroën C8 and Peugeot 807. There are variations in pipe routing and diameters within the same engine family, so always compare the part number, shape and connections against the existing pipe and verify against your VIN before purchase.

Technical Information

• Manufacturer: PSA (Citroën / Peugeot)
• Model: Citroën C8; Peugeot 807; for 2.0 HDi engines (codes RHR, RHK)
• Product Codes: 0382H2; 0382HE
• Other Numbers: RHR, RHK (engine codes)

If you are searching for “turbo inlet pipe 2.0 HDi”, “turbocharger intake hose PSA” or the specific codes 0382H2 / 0382HE, this is the correct replacement component for the applications described. Always confirm the part number and visually compare the existing pipe to ensure trouble-free installation and correct function of the intake system.