High‑quality replacement passenger sun visor suitable for Citroën Berlingo II and Peugeot Partner II models. Ideal for mechanics and DIY enthusiasts who need a direct-fit interior part to restore shading and cabin comfort. The visor helps reduce glare for the front passenger, improves driving comfort and preserves the original look of the interior. Frequently Searched By Part Numbers: 8143TG, 1618180980.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Citroën Berlingo II, Peugeot Partner II
• Product Codes: 8143TG, 1618180980
• Additional Numbers: No Further OEM Numbers Provided

Function And Common Issues

The Sun Visor Provides Glare Protection And A Comfortable Passenger Environment. Typical Failures Include Worn Or Broken Hinge/Pivot, Detached Retaining Clip, Torn Cover Fabric, Or Surface Stains From Prolonged Sun Exposure. Mechanical Damage Often Occurs When The Visor Is Forced Or When Clips And Mounting Points Become Brittle Over Time.

Replacement Frequency

There Is No Fixed Service Interval For Sun Visors. Replacement Is Usually Driven By Visible Wear, Broken Hinge, Non‑functional Retaining Clip Or Cosmetic Damage That Affects Comfort. In Utility Vehicles Used Frequently In Sunlight Or Harsh Conditions, Expect Faster Degradation Of Fabric And Plastic Components.

Installation Recommendations

Basic Steps For Replacement (General Guidance):

• Park The Vehicle On A Level Surface And Disconnect The Battery If Working Near Electrical Components.
• Remove Any Trim Covers Or Clips Hiding The Mounting Screws.
• Unscrew The Visor Mounting Screws And Carefully Support The Visor To Avoid Dropping It.
• If Equipped, Disconnect Any Electrical Connector For A Vanity Mirror Light Before Removing The Visor.
• Fit The Replacement Visor, Reconnect Electrical Connectors If Present, And Secure Mounting Screws To The Manufacturer’s Torque Recommendations.
• Check That The Visor Moves Smoothly And That The Retaining Clip Holds It Firmly In Stowed Position.

Note: The Left Hinge May Not Be Included With This Item. Verify That The Supplied Hinge/Clips Match Your Vehicle Before Installation.

Why The Part Most Often Fails

Sun Visors Are Exposed To Heat, UV Radiation And Frequent Use. Plastic Hinges And Clips Become Brittle Over Time, Leading To Breakage. Repeated Movement Can Wear Internal Mounts, And Fabric Or Foam Can Delaminate Or Stain. Impacts Or Forced Operation During Entry/Exit Also Cause Damage.

Fitment Tips

Ensure Compatibility With Citroën Berlingo II And Peugeot Partner II Model Years That Use The Same Interior Trim Layout. Use The Part Numbers 8143TG Or 1618180980 When Searching For Matching Items To Improve The Chance Of Correct Fitment.

Replacement Driver-Side Sun Visor Designed For Citroën Berlingo II And Peugeot Partner II. Ideal For Professional Workshops And Do-It-Yourself Mechanics Looking To Replace A Worn Or Broken Visor With An OE-Fit Part. Commonly Searched Under Part Numbers 8143TG And 1618180980, This Unit Matches Interior Trim And Mounting Points On Second-Generation Berlingo/Partner Models (2008–2018).

The Visor Provides Standard Sun Shielding For The Driver, With Original Mounting Points To Ensure Proper Fit And Function. As This Is A Used Part, Expect Minor Surface Soiling And Possible Signs Of Normal Wear. Note That The Right Detachable Hinge May Be Missing — Inspect The Item And Photos Carefully If Your Installation Requires Transfer Of The Hinge.

Technical Information

• Manufacturer: Stellantis (Citroën/Peugeot)
• Model(s): Citroën Berlingo II, Peugeot Partner II (2008–2018)
• Product Codes: 8143TG, 1618180980
• Additional Numbers: Commonly Referenced In Interior/Visor Categories; See Photos And Part Labels

Installation Recommendations

• Prepare Tools: Trim pry tool, Torx or Phillips screwdriver depending on fasteners, and replacement clips if needed.
• Remove Trim Cover: Pry off the plastic cover that conceals the mounting screws or clips on the headliner.
• Disconnect Any Wiring: If The Visor Has An Illuminated Vanity Mirror, Unplug The Electrical Connector Before Fully Removing The Unit.
• Unscrew/Unclip The Bracket: Remove Mounting Screws And Carefully Release The Retaining Clip; Support The Visor To Prevent Damage To The Headliner.
• Fit And Test: Transfer Any Required Hinge Or Clips From The Old Unit If Missing, Fit The Replacement, And Check Range Of Motion Before Final Tightening.
• Use New Fasteners If Damaged: Replace Broken Clips Or Worn Screws To Ensure Secure Mounting And Eliminate Rattles.

Why This Part Fails Most Often

• Mechanical Wear: Repeated Pivoting Causes Plastic Hinges Or Pivot Pins To Crack Or Snap.
• Broken Retaining Clips: Clips That Hold The Visor In Stowed Position Become Brittle And Lose Grip.
• Fabric And Foam Degradation: Prolonged UV Exposure And Heat Can Cause Fabric Fading, Delamination, Or Crumbling Foam.
• Impact Or Rough Use: Heavy Handling Or Accidental Force When Entering/Exiting Can Damage The Mounting Bracket.

Part Numbers 8143TG And 1618180980 Are Frequently Used When Searching For The Correct Replacement; Always Compare The Part Number And Mounting Shape To Your Existing Visor. Suitable For Garage Replacement And Straightforward For Experienced DIYers; Bring Replacement Clips If Original Hardware Is Missing.

High-quality used passenger sun visor suitable for Citroën Berlingo II and Peugeot Partner II. Ideal for professional workshops and DIY mechanics looking for a direct-fit interior replacement. The visor restores proper sun shielding on the front passenger side, improving comfort and visibility while maintaining the original appearance of the vehicle. Part commonly searched by OEM codes listed below — include these in your search to find the correct fit quickly.

Technical Information

• Manufacturer: Citroën / Peugeot (Stellantis)
• Model: Citroën Berlingo II, Peugeot Partner II (Second Generation)
• Product Codes: 8143TH, 8143TK, 1618181380
• Additional Numbers: 16181380, 8143.TK, 8143.TH, T20/T25

Compatibility And Fitment

Designed for the front passenger (right-hand) position on Citroën Berlingo II and Peugeot Partner II second generation models. Always check the shape and mounting bracket of your original visor against photos or part numbers to confirm fitment before installation.

Function

The sun visor shields the driver or passenger from direct sunlight and glare, improving driving comfort and safety. Depending on the vehicle specification the visor may include a vanity mirror or mounting points for accessories. This used unit restores proper positioning and retention when the original visor is loose, broken or worn.

Common Failure Causes

• Broken Pivot Or Retainer Clips: Most frequent cause — plastic mounts or clips fatigue or snap from repeated use or impact.
• Worn Internal Spring Or Hinge: Visor hangs loosely or does not stay in position due to internal mechanism wear.
• Cosmetic Wear: Fabric or vinyl surface soiling, fading or edge fraying from sun exposure over many years.
• Damaged Vanity Mirror Or Trim: Cracks or detached mirror trim from impact or misuse.

Installation Recommendations

Basic replacement can usually be completed with common hand tools by a trained mechanic or competent DIYer. Typical steps:

• Fold the visor into the service position and remove any plastic trim caps covering the mounting screws.
• Unscrew the mounting screws and gently pull the visor from the bracket; if present, disconnect any electrical connector for illuminated mirrors first.
• Inspect the mounting bracket and retaining clips — replace broken clips or a damaged bracket to ensure secure fitment.
• Install the replacement visor by reconnecting the electrical plug (if applicable), aligning the pivot and tightening screws securely but without over-torquing plastic components.
• Check travel and retention — the visor should hold position without excessive play and fold smoothly into the headliner.

Practical tips: Work on a clean, padded surface to protect trim and headliner. If the visor contains illumination, remove the vehicle key and, as a precaution, isolate the battery before disconnecting electrical plugs to avoid short circuits.

Condition Notice

Item Is Used And May Show Minor Dirt, Light Surface Marks Or Cosmetic Wear Consistent With Age. Functional Parts Such As The Pivot And Mounting Points Should Be Checked During Installation; Replacing Damaged Clips Or Fasteners Improves Longevity.

Why Choose This Part

An economical way to restore interior function and original appearance on Citroën Berlingo II and Peugeot Partner II. Practical for fleet repairs, workshops and owners preferring OEM-fit parts by part number. Search by the listed product codes to quickly locate the correct unit for your vehicle.

Product Overview

Durable driver-side sun visor suitable for Citroën Berlingo II and Peugeot Partner II. Designed to reduce glare and improve driving comfort, this original equipment part carries common OEM references used by Stellantis platforms. Frequently searched by part number, it represents a cost-effective replacement for worn, damaged or discolored visors in workshop and DIY repairs.

Key Benefits

• Direct fit for listed models — preserves factory appearance and mounting points.
• Simple, fast replacement suitable for professional garages and competent DIY mechanics.
• Original part quality ensures correct geometry for sun shielding and clearance when folded.

Compatibility

Fits: Citroën Berlingo II, Peugeot Partner II (Driver Side / Left). Often referenced under OEM codes and aftermarket listings — customers commonly search using the product numbers shown below.

Installation

Replacement is straightforward for an experienced mechanic. Typical steps:

• Disconnect the battery if any electrical components (e.g., illuminated mirror) are present to avoid short circuits.
• Remove the trim cover over the visor bracket to access fasteners.
• Unscrew the mounting screws or release retaining clips and carefully lower the visor assembly.
• Transfer any clips or trim pieces to the new visor if required, then secure the new unit in place and reattach trim.

Estimated workshop time: 15–30 minutes depending on equipment and vehicle trim level.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Citroën Berlingo II, Peugeot Partner II
• Product Codes: 8143TH, 8143TK, 1618181380
• Additional Numbers: 8143.TH, 8143.TK, T20/T25

Installation Recommendations

• Work On A Cold Vehicle In A Clean Area To Prevent Scratches And Dirt Transfer.
• Use The Correct Screwdriver Or Torx Bit To Avoid Stripping Fasteners.
• If The Visor Has An Illuminated Mirror, Ensure Electrical Connectors Are Reconnected Securely And Test Function Before Reassembling Trim.
• After Installation, Check Movement For Smooth Operation And Correct Clearance With Headliner And Door Frame.

Most Common Failure Reasons

Sun visors typically fail due to mechanical wear of the pivot and retaining clips from repeated use, broken plastic mounting points after impact (e.g., door slam or heavy force), or cosmetic damage such as fading and stains. In vehicles where a vanity mirror is present, connector fatigue or wiring damage can also lead to loss of illumination.

Notes For Buyers

This listing is for a used, driver-side sun visor. Appearance may show minor wear or soiling consistent with previous use. Verify the part numbers listed match your vehicle’s requirements before ordering to ensure correct fitment.