Replace your worn or damaged passenger sun visor with this OEM‑quality used sun visor for the Peugeot 406. Designed to restore glare protection, comfort and the integrated vanity mirror lighting, this part is a practical and cost‑effective solution for workshops and DIY mechanics. The visor retains the original mounting points and mirror assembly, making fitment straightforward on compatible 406 interiors. Typical search terms: Peugeot 406 sun visor, 8143GJ sunshade, passenger visor with mirror and light, OEM sun visor Peugeot.

Technical Information

• Manufacturer: Stellantis / Peugeot
• Model: Peugeot 406
• Product Codes: 8143GJ
• Additional Numbers: NFP
• Color: FBJ – LAMA
• Position: Right (Passenger Side)
• Condition: Used – may require cleaning

Installation Recommendations

• Preparation: Work in a clean, well‑lit area. Have basic trim tools and a small screwdriver set ready.
• Safety: Disconnect the vehicle battery before starting to avoid short circuits when disconnecting the vanity light wiring.
• Removal: Carefully remove any plastic trim covers concealing the visor pivot, unscrew the pivot fasteners and gently pull the visor away. If the visor has a wired vanity lamp, disconnect the electrical connector before full removal.
• Fitment: Reconnect the lamp wiring, position the visor on the pivot, fasten the screws and refit any trim covers. Verify mirror lighting operation and secure movement of the visor.
• Tip for Mechanics: Inspect the mounting bushings and screw threads for wear or damage and replace if needed to prevent excessive play.

Most Common Failure Causes

• Mechanical Wear: Hinge or pivot bushings wear out over time, causing loose or sagging visor movement.
• Clips And Mounts: Plastic trim clips or mounting points can crack or break during use or when removing/installing the visor.
• Electrical Faults: Vanity lamp failure is usually due to a burned bulb, corroded contacts or a damaged wiring connector.
• Cover Wear And Soiling: Fabric or vinyl facing becomes faded, stained or delaminated from prolonged sun exposure and use.
• Impact Damage: Forceful contact (door opening, cargo handling) can deform the visor or damage the mirror housing.

This listing suits garages and experienced DIYers looking for a direct replacement component for the Peugeot 406 passenger side. Because this is a used part, inspect and clean the item before installation and confirm the lamp and mechanical fitment during the mounting procedure.

Featuring a built-in mirror and lighting, this sun visor is not only practical but also adds a touch of convenience for daily driving. It’s important to note that this is a used part, so some signs of wear and potential dirt may be present, which can be easily cleaned before installation.

Replacing the sun visor is a straightforward process, typically requiring basic tools and a few minutes of your time. Regular wear and exposure to sunlight can cause sun visors to deteriorate over time, making this replacement a necessary upkeep for maintaining vehicle comfort.

Technical Information

• Manufacturer: Peugeot
• Model: 406
• Product Codes: 8143GJ
• Additional Numbers: NFP

Technical Information

• Manufacturer: PSA CITROEN PEUGEOT
• Model: 406
• Product Codes: 8143T4
• Additional Numbers: Not available

The Left Sun Visor is an indispensable component for your Peugeot 406, assisting in providing shade and visibility while driving. This used part may show signs of prior use, and it is advisable to clean it before installation. Regular replacements are often needed due to wear and tear from daily use, especially when exposed to sun damage over time. Installation is straightforward, making it a great choice for both professional mechanics and DIY car enthusiasts.

This used part may show signs of wear and tarnish, thus cleaning is recommended before installation. The right sun visor typically wears out due to prolonged exposure to sunlight, which can cause fading and mechanical fatigue over time, so replacing it is crucial for maintaining visibility and comfort while driving.

Technical Information

• Manufacturer: PSA
• Model: Peugeot 406
• Product Codes: 8143T4
• Additional Numbers: N/A

Overview

This original used passenger sun visor is designed for the PEUGEOT 406 and carries reference code 8143GH. It provides effective glare protection for the front passenger and includes an integrated vanity mirror. Supplied as a used interior component, the visor may require cleaning and minor refurbishment before installation. Ideal for professional workshops and DIY enthusiasts looking for an OEM-fit replacement at a competitive price.

Key Benefits

• OEM Fitment: Direct replacement for factory-installed sun visor on PEUGEOT 406.
• Integrated Vanity Mirror: Restores passenger convenience and interior functionality.
• Cost Effective: Used part option retains factory appearance and mounting points.
• Searchable By Code: Often found by product code 8143GH — useful for rapid identification.

Compatibility And Fitment

Designed specifically for PEUGEOT 406 models. Verify the part code 8143GH when searching to ensure proper match with your vehicle’s interior trim and mounting configuration.

How The Part Is Replaced

Replacement is straightforward for an experienced mechanic or capable DIYer. Typical steps:

1. Fold the sun visor to an accessible position and, if present, open the vanity mirror cover.
2. Remove the retaining screws or clips that secure the visor mounting bracket to the headliner (usually 2–3 fasteners).
3. If the visor has an illuminated mirror, carefully unplug the electrical connector before full removal.
4. Install the replacement visor by reconnecting the electrical plug (if present), positioning the bracket, and securing screws/clips to the recommended torque.
5. Check mirror cover operation, illumination (if applicable), and secure mounting with no play.

Technical Information

• Manufacturer: Stellantis (Citroën/Peugeot)
• Model: Peugeot 406
• Product Codes: 8143GH
• Additional Numbers: NFP

Installation Recommendations

• Work On A Level Surface With Good Lighting. Use trim tools to avoid damaging headliner material.
• If The Visor Is Illuminated, Disconnect The Battery Before Unplugging Electrical Connectors To Avoid Short Circuits.
• Retain All Fasteners And Replace Any Broken Clips. Use Threadlocker On Metal Screws If Corrosion Or Loosening Is Observed.
• After Installation, Verify Smooth Pivot Action And Secure Fixing; Adjust As Needed To Avoid Rattles.

Common Reasons For Failure

• Mechanical Wear: Plastic pivot or mounting bracket fatigue from repeated use leading to loose or detached visor.
• Mirror Damage: Vanity mirror glass cracked or detached due to impact or aging adhesive failure.
• Fabric Deterioration And Staining: Sun Exposure, Smoke, Or Spills Causing Discoloration, Burns, Or Soiling.
• Electrical Faults: If Equipped With Illumination, Bulb Or Wiring Failures Can Occur Over Time.

Why Choose This Part

This sun visor is an economical way to restore passenger comfort and interior appearance while preserving original mounting points and aesthetics. For professionals and hobbyists, locating the part by code 8143GH speeds up the repair process and ensures a correct fit.

This left (driver side) sun visor is an OEM used component for Peugeot 406 models and is often searched by part number 8143GH. Ideal for professional workshops and DIY mechanics who need a direct-fit replacement for a worn or damaged visor. As a genuine used part, it offers original fit, finish and mounting points, saving time on modifications compared with universal aftermarket visors.

Compatibility And Application

Fits Peugeot 406 (Passenger Car) — commonly used across model years of the 406 range. Confirm fit by matching the mounting style and part number 8143GH. Typical applications include sedan and estate body styles where the left/driver sun visor uses the same mounting bracket and dimensions.

How The Part Functions

The sun visor provides glare protection for the driver and includes an integrated vanity mirror. It attaches to the roof header with a pivot bracket that allows rotation and stowage. The visor shell and internal foam provide shape and surface finish; the mirror offers convenience for driver-side checks.

Replacement Procedure (General Guide)

Replacement is straightforward for a trained mechanic or competent DIYer. Typical steps:

• Remove any decorative caps on the visor mounting plate.
• Unscrew the mounting screws while supporting the visor to avoid dropping it.
• If present, disconnect any electrical connector for illuminated mirrors (verify visually before unplugging).
• Remove the old visor and swap with the replacement, align the bracket and tighten screws to manufacturer torque where available.
• Refit decorative caps and test pivot action and mirror condition.

Installation Recommendations

Always handle the visor carefully to avoid scratching the mirror or covering. Use the correct screwdriver to prevent cam-out of mounting screws and ensure clips and screw threads are intact before final assembly. If an electrical connector is present, inspect wiring for corrosion and secure any retained clips. Test the visor pivot and mirror after installation to confirm correct operation.

Most Common Failure Reasons

Sun visors typically fail due to mechanical wear of the pivot or bracket, foam deterioration inside the visor causing sagging or surface deformation, broken or missing mounting clips, or cosmetic damage and staining from smoke, oil, or dirt. Mirrors can crack or become detached from the visor backing. As a used part, expect signs of wear; cleaning and minor repairs to clips or fasteners are common.

Technical Information

• Manufacturer: Stellantis / Peugeot
• Model: Peugeot 406
• Product Codes: 8143GH
• Additional Numbers: Driver Side (Left) — NFP (as marked)

Note: This is a used part. Visual cleaning and possible refurbishment may be required before installation. Check mounting hardware and mirror integrity during fitment.