Product Overview

Direct-fit steering wheel designed for the facelifted first-generation Citroën C1 and Peugeot 107 (from 2013) equipped with a column-mounted gear shifter. This steering wheel preserves original ergonomics and control layout, making it a practical replacement for workshops and DIY mechanics looking to restore steering comfort and functionality.

Key Benefits

• OE Reference Fitment: Matches original dimensions and mounting points for straightforward installation.
• Retains Column Shifter Compatibility: Designed specifically for vehicles with gear selection under the steering column.
• Improves Driving Comfort: Restores worn grip and switch functionality for a safer, more comfortable driving experience.
• Parts-Number Search Friendly: Commonly located by OE numbers and aftermarket codes used by mechanics.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Citroën C1; Peugeot 107 — First-Generation Facelift From 2013
• Product Codes: 45180-0H040-B; 45100-0H040
• Additional Numbers: 16080411ZD; 06099527ZD; 45180-040-B; 16080411

Installation Recommendations

Safe and correct installation is essential. Follow these professional steps:

• Disconnect the Battery: Always disconnect the negative battery terminal before working on the steering wheel to avoid airbag deployment and electrical damage. Wait the manufacturer-recommended time for any capacitors to discharge.
• Mark Steering Position: Center the steering and mark the relationship between the wheel and the steering column to preserve steering alignment and avoid steering angle sensor misalignment.
• Remove Airbag and Switchgear Carefully: Release the airbag module using the correct access points, unplug connectors gently and store the module face up. Take care with clock spring and connector tabs.
• Torque and Reassembly: Tighten the steering wheel retaining nut to the Manufacturer-Specified Torque and ensure all electrical connectors are seated. Refit the airbag module and confirm that all steering wheel controls operate correctly.
• Post-Installation Checks: Verify steering angle sensor status and that the airbag indicator clears. If steering angle or airbag warning persists, perform calibration or fault reading with appropriate diagnostic equipment.
• If Unsure, Use Professional Tools: For airbag handling, clockspring work or advanced diagnostics, seek a workshop with the correct tools and experience.

Why The Part Most Commonly Fails

• Wear And Tear: Frequent handling leads to abrasion of the grip material, fading and cosmetic degradation over time.
• Switch And Electrical Faults: Buttons, horn contacts or wiring in the wheel can fail or develop intermittent connections.
• Clockspring And Connector Damage: Incorrect removal or wear can damage the clockspring ribbon or connector pins, causing loss of airbag or steering-control functions.
• Mechanical Damage: Impact, collisions or forceful handling during repairs can deform mounting points or damage internal components.

Compatibility Notes

Intended for Citroën C1 and Peugeot 107 first-generation facelift models from 2013 with a column-mounted gear shifter. Search by the listed product codes for fastest match.

Final Advice

This steering wheel is a direct replacement option for professional garages and competent DIY mechanics. Follow safe removal and installation practices, handle the airbag module with care and verify functionality after fitting to ensure a reliable and secure result.

Description

This integrated steering wheel switch module replaces the original controls on Citroën C4 II and DS4 steering wheels. Designed to operate infotainment, cruise control, telephone and trip computer functions depending on vehicle equipment, it restores full functionality and tactile feedback to the driver’s controls. Ideal for professional workshops and competent DIY mechanics, the unit is often searched by its product codes (96720514ZD, 98094655ZD) when sourcing a direct-fit replacement.

Technical Information

• Manufacturer: Stellantis (Citroën/Peugeot)
• Model: Citroën C4 II, DS4
• Product Codes: 96720514ZD, 98094655ZD
• Other Numbers: Not Available

Fitment And Compatibility

Fits Citroën C4 II and DS4 models equipped with steering wheel-mounted controls. Compatibility depends on the vehicle’s equipment level (infotainment, cruise control and phone integration). Search by product code for faster identification. Note that versions and connector layouts may vary by production year and regional specification.

Replacement Procedure

• Disconnect The Battery: Always disconnect the negative battery terminal and wait at least 10 minutes to allow airbag system capacitors to discharge.
• Remove Airbag And Steering Wheel Trim: Follow manufacturer instructions for safe removal of the airbag module and trim pieces.
• Unplug Electrical Connectors: Carefully release the electrical connectors and any retaining clips from the switch module.
• Remove Old Module And Fit New One: Replace the module, ensuring correct orientation and secure connector engagement.
• Reassemble And Torque To Spec: Refit the steering wheel and airbag, tightening the steering wheel retaining nut to the manufacturer’s specified torque.
• Function Check: Reconnect the battery and verify all steering wheel switch functions (audio, cruise, phone, menus) and warning lights. Clear any stored fault codes if present.

Installation Recommendations

• Observe Safety Procedures: Always follow the vehicle manufacturer’s service manual for airbag and steering system procedures.
• Avoid Damaging The Clock Spring: Keep the clockspring centered while the steering wheel is removed to prevent over-rotation and damage.
• Use Proper Tools: Use the correct Torx/sockets and torque wrench; tighten fasteners to PSA specification.
• Check Connector Contacts: Inspect connector pins and wiring for corrosion or damage before installation to ensure reliable operation.
• Perform Post-Installation Tests: Verify all functions and clear any stored faults using appropriate diagnostic equipment.

Why It Fails Most Often

• Wear And Tear: Frequent use of buttons causes mechanical wear of contacts and switches over time.
• Oxidation And Corrosion: Moisture ingress or humid environments can corrode electrical contacts and connectors.
• Damage During Service: Incorrect handling during airbag or steering wheel removal may damage the module or its connectors.
• Electrical Faults: Short circuits, wiring damage or connector issues can lead to partial or complete loss of switch functions.

Notes

This unit is a direct-replacement steering wheel control module commonly referenced by the product codes 96720514ZD and 98094655ZD. When replacing, follow manufacturer safety procedures and test all functions after installation for reliable, long-term operation.

Product Description

Used steering wheel for Citroën C4 II and DS4 series vehicles. The wheel features a lower section finished in non-perforated leather with split leather specification L037 and a Black Mistral trim. This unit is supplied without the integrated VMF controller (can be acquired separately). The surface shows typical signs of wear as expected for a used interior part.

Compatibility and Fitment

Direct fit for Citroën C4 II and DS4 models (refer to product codes below). Compatible with vehicles that use the listed part numbers; verify fitment by matching product codes with the vehicle’s existing part. Ideal for mechanics and DIY technicians replacing a worn or damaged steering wheel.

Technical Information

• Manufacturer: Stellantis / Citroën / Peugeot
• Model: Citroën C4 II, DS4
• Product Codes: 96754515ZD, 98039712ZD, 96700162ZD, 4109QT
• Additional Numbers: L037

Installation Recommendations

Follow safe workshop procedures when replacing the steering wheel. Key recommendations:

• Disconnect the battery and wait at least 10 minutes before starting to avoid accidental airbag deployment.
• Mark the steering column and wheel position to preserve alignment. Remove the airbag module and disconnect electrical connectors carefully.
• Loosen and remove the central retaining nut, then remove the wheel (use a steering wheel puller if necessary).
• Install the replacement wheel in the correct orientation, torque the retaining nut to the manufacturer’s specification (consult service manual), and reconnect all electrical connectors.
• After installation, check steering angle alignment and verify airbag and steering wheel controls functionality. Reconnect the battery and perform any required calibration as per manufacturer guidelines.

Common Reasons For Failure

Steering wheels typically show problems due to normal wear and environmental exposure. Common causes include:

• Leather Wear And Surface Degradation: Repeated hand contact, body oils, dirt and UV exposure cause the leather to darken, smooth, crack or peel—especially on high-contact areas such as the lower spoke and rim.
• Loss Of Stitching Or Trim Damage: Mechanical abrasion and aging can lead to loose stitching or separation at seams.
• Electrical Issues Related To Clock Spring: While the wheel itself may be sound, failures in the spiral cable (clock spring) or connector harness can produce faults in airbag, horn or steering wheel controls—these components should be inspected during replacement.
• Mechanical Wear: Intensive use or improper removal/installation can damage splines or mounting surfaces, causing looseness or alignment problems.

Why Choose This Part

This steering wheel is a practical replacement for workshops or competent DIYers seeking an OEM-coded fit for Citroën C4 II and DS4 vehicles. It preserves original interior styling with Black Mistral trim and the specified L037 split leather finish, offering a direct, value-conscious solution when the original wheel is worn.

This steering wheel fits Citroën C4 II and DS4 models and is an ideal replacement for workshops and DIY mechanics looking to restore interior feel or replace a worn or damaged wheel. The lower section in non-perforated leather gives a solid tactile grip and a refined appearance. The wheel does not include the multifunction (VMF) controller, which can be sourced separately if you require audio, cruise or phone control functionality integrated into the wheel.

Benefits And Application

Designed to match original styling and fitment for compatible Citroën/Peugeot steering columns, this wheel is a direct-swap option when the rim is worn, stitched seams are damaged, or when upgrading from a faded factory wheel to a fresh leather finish. Listing numbers such as 98039712ZD and 96700162ZD are commonly used in searches, so including these references helps technicians and parts buyers find the correct item quickly.

How To Replace

• Disconnect The Battery And Wait At Least Several Minutes Before Starting Work To Avoid Airbag Deployment Risk.
• Place The Steering Wheel Straight Ahead And Mark The Position Of The Old Wheel Relative To The Column To Preserve Alignment.
• Remove The Airbag Module According To Manufacturer Procedure (Access Points Usually At The Rear Of The Wheel Or Secured With Torx Fasteners).
• Unplug Airbag, Horn And Any Steering Wheel Control Connectors Carefully.
• Loosen And Remove The Central Steering Nut, Then Use A Suitable Steering Wheel Puller If The Wheel Is Seized On The Spline.
• Transfer Switches, Trim Pieces Or Wiring Harnesses As Required From The Old Wheel To The New Wheel.
• Refit The Wheel Ensuring Alignment Marks Match, Torque The Central Nut To Manufacturer Specification, Reconnect Electrical Connectors And Refit The Airbag Module.
• After Reassembly, Reconnect The Battery And Check SRS/Airbag And Steering Controls With Diagnostic Equipment; Clear Any Fault Codes If Necessary.

Technical Information

• Manufacturer: Stellantis (Citroën/Peugeot)
• Model: Citroën C4 II, DS4
• Product Codes: 98039712ZD, 96700162ZD, 4109QT
• Additional Numbers: L037 (Leather Code), Finish/Colour: Black Mistral

Installation Recommendations

• Always Disconnect The Battery Before Any Work On The Steering Wheel Or Airbag System.
• Use The Correct Tools: Torx Drivers, Steering Wheel Puller, Torque Wrench And A Clean Work Area.
• Avoid Twisting Or Damaging The Clockspring (Spiral Cable). If You Find Excessive Resistance When Turning The Wheel Off The Column, Inspect Or Replace The Clockspring.
• Transfer Electrical Components Carefully And Verify Connector Integrity; Corroded Or Damaged Pins Can Cause Intermittent Failures.
• Final Torque Of The Central Nut And Any Manufacturer-Specific Procedures Should Follow Official Repair Manuals.

Why This Part Most Commonly Fails

• Leather Wear And Surface Degradation Due To Long-Term Use, Sun Exposure, Oils From Hands And Abrasion.
• Damaged Stitching Or Separation At High-Contact Areas, Especially At The Lower Rim.
• Failure Or Malfunction Of Integrated Controls (When Present) From Dirt, Moisture Or Repeated Use.
• Airbag Deployment Can Make Replacement Necessary Even If The Wheel Rim Appears Intact.
• Problems With The Clockspring (Spiral Cable) May Appear As Non-Working Horn, Airbag, Or Steering Wheel Buttons—Often Attributed To The Wheel But Originating In The Spiral Cable.

Keywords For Search Optimization: Citroen C4 II Steering Wheel, DS4 Steering Wheel, 98039712ZD, 96700162ZD, Leather Steering Wheel, VMF Multifunction Steering Wheel Replacement.

Overview

High-quality original steering wheel for Citroën models, ideal for mechanics and skilled DIYers looking to replace a worn or damaged steering wheel. Frequently searched under product codes 96821842ZD and 4109HN, this steering wheel retains the original finish and controls layout, delivering a factory fit and feel.

Function

The steering wheel provides driver input to the steering system and houses integrated components such as the horn, airbag module, and control switches for audio or onboard systems where equipped. It is a central interior element that affects ergonomics, safety and cabin aesthetics.

Compatibility And Fitment

Designed for Citroën C4 and Citroën C4 Picasso (first series). Confirm fitment by matching the product codes 96821842ZD or 4109HN with the part required for the vehicle. The wheel is finished in Black Mistral (Color Code HZD).

Replacement Procedure

1. Disconnect the vehicle battery and wait at least 10 minutes before touching the airbag to avoid accidental deployment.
2. Mark the steering wheel position relative to the steering column to preserve alignment.
3. Remove the airbag module by releasing the retaining clips or screws from the rear of the wheel and carefully disconnect the airbag and horn connectors.
4. Loosen and remove the central retaining nut, then use a suitable steering wheel puller to remove the wheel from the splined shaft without damaging the column.
5. Transfer any switches or trim pieces if required, fit the replacement wheel onto the spline ensuring alignment marks match, and tighten the retaining nut to the manufacturer’s specified torque.
6. Reconnect connectors, refit the airbag module, reconnect the battery, and verify that SRS and steering controls are functioning. Steering angle sensor recalibration may be required using diagnostic equipment.

Technical Information

• Manufacturer: Stellantis / Citroën
• Model: Citroën C4; Citroën C4 Picasso (First Series)
• Product Codes: 96821842ZD, 4109HN
• Other Numbers: NFP; Color Code HZD – Black Mistral

Installation Recommendations

Always observe safety procedures when working with SRS components. Disconnect the battery before starting and allow capacitors to discharge. Use proper tools (steering wheel puller, torque wrench) and follow the vehicle manufacturer’s tightening specifications. After installation, check that airbag warning lamp extinguishes and, if necessary, perform steering angle sensor calibration with appropriate PSA diagnostic tools.

Why This Part Most Commonly Fails

Steering wheels typically show wear from constant handling: leather or trim can fade, crack or become shiny from oils and abrasion. Excessive sun exposure accelerates deterioration. Mechanical issues can arise from impacts in collisions, which may damage mounting splines or the airbag/horn connectors. Electrically, buttons and switches can fail from use or moisture ingress.

Ideal For

Professional workshops and experienced DIYers who require a ready-to-fit replacement steering wheel for Citroën C4 / C4 Picasso first-series vehicles. Searchable by part numbers 96821842ZD and 4109HN for fast identification.

Overview

High-quality replacement steering wheel suitable for first generation Peugeot 3008 and 5008. Ideal for mechanics and DIY enthusiasts looking for an original-style wheel with Mistral black trim. The unit preserves the original mounting interface and airbag provision, enabling direct replacement in compatible vehicles when correctly installed.

Function And Application

The steering wheel is the primary driver interface for vehicle steering, housing the horn, airbag module, and, where fitted, multifunction controls (audio, cruise control, phone). It ensures correct ergonomics and control feedback. In normal conditions steering wheels are durable; most replacements are due to cosmetic wear, damage from accidents, or malfunctioning control switches.

Replacement Procedure

• Disconnect the battery and wait at least 10 minutes to allow the airbag system capacitors to discharge.
• Center the front wheels and mark the steering column spline and steering wheel position to preserve alignment.
• Remove the airbag module following the manufacturer procedure (fasteners/clips), disconnect airbag and horn connectors carefully.
• Loosen and remove the central retaining nut/bolt, then withdraw the steering wheel from the column spline.
• Transfer any switches or trim pieces if required, or install the replacement wheel, aligning splines to the marks made earlier.
• Tighten the central nut/bolt to the manufacturer torque specification, reconnect airbag and horn connectors, reinstall the airbag module.
• Reconnect the battery and verify proper operation of airbag warning lamp, horn and any steering wheel controls. If any faults appear, diagnose the clockspring (spiral cable) and associated connectors.

Installation Recommendations

• Work Should Be Performed By A Qualified Technician When Airbag Systems Are Involved. Safety Is Paramount.
• Always Disconnect The Battery Before Starting And Observe The Manufacturer’s Procedures To Avoid Damage To Electronic Components.
• Mark Alignment Points To Ensure Steering Wheel And Steering Angle Sensor Remain Correctly Aligned.
• Inspect The Clockspring (Spiral Cable) And Airbag Connectors For Damage; Replace If Any Signs Of Wear Or Damage Are Found.
• If Transferring Buttons Or Airbag From Old Wheel, Ensure All Connectors Are Clean And Correctly Seated.

Common Failure Reasons

• Cosmetic Wear: Surface wear, fading or cracking of the rim material due to mileage and use.
• Mechanical Damage: Impact from accidents or improper removal can deform the wheel or damage mounting splines.
• Switch Or Wiring Faults: Multifunction button failure or damaged wiring/connectors, often caused by moisture ingress or heavy use.
• Airbag Deployment: After deployment the steering wheel (and airbag) must be replaced; deployed units are not serviceable.

Technical Information

• Manufacturer: Peugeot / Stellantis
• Model: Peugeot 3008 I, Peugeot 5008 I
• Product Codes: 96866138ZD
• Other Numbers: HZD – Black Mistral (trim)

Compatibility And Notes

This steering wheel is intended for first generation Peugeot 3008 and 5008 models. As this is a used item it may have minor signs of wear. When replacing, verify that all connectors, the clockspring and airbag module are in good condition to ensure safe operation.

Why Choose This Part

Original-style steering wheel with correct fitment and trim finish for Peugeot 3008/5008 I. A practical choice for repair shops and DIYers seeking a direct-fit replacement that restores the vehicle’s original look and driver interface.

This replacement steering wheel is designed for Citroën C8 and Peugeot 807 vehicles. It is a practical choice for professional workshops and experienced DIY mechanics who need a direct-fit steering wheel that restores driving comfort and control. The part is commonly searched by product codes, so you will find it listed under the original numbers shown below.

Features and Benefits

– Direct-fit design for Citroën C8 and Peugeot 807, offering correct mounting interface and wheel alignment when installed properly.
– Restores steering ergonomics, horn function and supports original steering controls where applicable.
– Durable construction suited for everyday use in passenger vans; ideal for both workshop repairs and owner maintenance.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Citroën C8 / Peugeot 807 (commonly fitted on model years 2002–2014)
• Product Codes: 14845640YR, 4109FH
• Additional Numbers: NFP

Installation Recommendations

Safety first: Disconnect the battery and wait the recommended time for SRS capacitors to discharge before starting work. Typical installation steps for a steering wheel replacement:

• Disconnect the battery and follow vehicle manufacturer safety procedures.
• Remove the airbag module carefully (if fitted) and disconnect all electrical connectors.
• Mark the steering column and wheel position to ensure correct wheel alignment on reassembly.
• Remove the central retaining nut and extract the wheel using an appropriate puller.
• Install the new wheel, align to marks, tighten the central nut to the vehicle manufacturer’s torque specification, and reconnect all electrical connections.
• After fitting, verify horn and steering control functions and clear any SRS or airbag fault codes using appropriate diagnostic equipment.

Why This Part Most Often Fails

Steering wheels rarely suffer mechanical failure but show wear for several reasons: long-term abrasion and oil/grease from hands lead to degraded leather or trim; buttons and switch pads can fail from repeated use; sun and UV exposure can cause fading and cracking; and airbag deployment during collisions will render the wheel and airbag module unusable. Electrical issues such as a damaged clockspring (spiral cable) can cause loss of horn, airbag warning lights or non-functional steering controls.

This steering wheel is a straightforward, high-value replacement for maintaining original driving feel and functionality in Citroën C8 and Peugeot 807 vehicles. Suitable for experienced mechanics and competent DIYers familiar with SRS precautions and steering system procedures.

This steering wheel is a direct-fit replacement for Citroën C8 and Peugeot 807 vehicles and is often searched for by its product codes 14845630YR and 4109AW. Designed to match the original interior aesthetics, the Alpaca Grey finish (HYR) provides a factory-like appearance and tactile feel. Ideal for professional workshops and competent DIY mechanics who require a precise, model-specific steering wheel.

Functionally, the steering wheel serves as the primary driver interface for vehicle direction, and it typically accommodates the airbag module, horn and steering-wheel-mounted controls when present on the original equipment. The unit is intended to restore ergonomics and safety after wear, cosmetic damage or following airbag deployment.

How To Replace

Replacement should be performed by a qualified technician or an experienced DIYer following safety precautions. General steps:

• Disconnect the negative battery terminal and wait at least 10–15 minutes to deactivate the airbag system.
• Remove any trim covers and unfasten the airbag retaining bolts; carefully disconnect airbag connectors and store the module face-up.
• Mark the steering column spline and wheel position to ensure correct alignment on reassembly.
• Remove the center bolt securing the steering wheel and extract the wheel using a suitable puller if necessary.
• Fit the replacement wheel, align the marks, tighten the center fastener to the manufacturer’s specified torque, reconnect the airbag and connectors, and reassemble trims.
• Reconnect the battery and verify that the airbag warning lamp extinguishes and that steering controls function correctly.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Citroën C8; Peugeot 807
• Product Codes: 14845630YR, 4109AW
• Additional Numbers: NFP (as provided)

Installation Recommendations

Always follow manufacturer’s safety procedures when working with airbag-equipped steering wheels. Use the correct tools—a torque wrench for the center nut and a steering wheel puller if the wheel is seized on the spline. Preserve alignment marks to maintain steering geometry and recalibrate any steering angle sensors if required by the vehicle after replacement. If uncertain about airbag handling, entrust the replacement to a professional workshop.

Why The Part Most Commonly Fails

Steering wheels are most often replaced due to cosmetic wear (surface cracking, abrasion, fading), physical damage from impacts or accidents, and following airbag deployment, which requires the steering wheel and airbag module to be replaced for safety. Additional causes include failure of integrated controls or degradation of trim materials from prolonged UV exposure and heavy use.

Buying a correctly coded replacement (14845630YR / 4109AW) ensures proper fitment and restoration of original driving ergonomics and appearance for Citroën C8 and Peugeot 807 vehicles.

This genuine-style leather steering wheel is a direct-fit replacement for Peugeot 407 models and restores the interior look while improving grip and driving comfort. The black Mistral leather gives a clean, factory-correct appearance and is often searched by part numbers, making it easy to find for professional workshops and DIY mechanics. Ideal for customers replacing a worn, faded, or damaged original wheel or upgrading the tactile feel of the steering interface.

Technical Information

• Manufacturer: Stellantis (Peugeot)
• Model: Peugeot 407
• Product Codes: 9663198177, 9662203377
• Additional Numbers: 4109GH, 4109HV

Function And Fitment

The steering wheel provides the primary mechanical interface between driver and steering column, houses the horn and switches (where applicable), and serves as the mounting surface for the driver airbag module. This unit is shaped and sized to match Peugeot 407 fittings and steering-column splines, ensuring correct alignment and ergonomic hand positions.

How To Replace

Replacement should be performed by a qualified technician or an experienced DIYer who follows safety procedures. Typical steps include:

• Disconnect the vehicle battery and wait at least 10 minutes to disable the airbag system.
• Mark the position of the steering wheel relative to the steering column spline to preserve alignment.
• Remove airbag module fasteners and carefully disconnect airbag and horn/controls connectors.
• Remove the central retaining nut, extract the old wheel, and install the new wheel onto the splines, aligning the marks.
• Reconnect electrical connectors, refit the airbag module, and torque the retaining nut to the manufacturer’s specification (refer to the workshop manual for exact torque values).
• Check the function of horn, steering-wheel controls, and airbag warning lamp after reconnection.

Installation Recommendations

• Always isolate the battery before touching airbag components to prevent accidental deployment.
• Use the correct tools and follow the manufacturer’s torque specifications for the steering-wheel retaining nut.
• Inspect the clock spring (spiral cable) and electrical connectors during replacement; damaged clock springs can cause loss of controls or airbag faults and should be replaced if suspect.
• Avoid using aggressive cleaners on leather; treat with suitable leather care products after installation to prolong lifespan.

Why This Part Most Often Fails

Leather steering wheels typically show deterioration from normal use rather than mechanical failure. Common causes of damage include:

• Surface wear and abrasion from constant hand contact, rings, and gloves.
• Sun and UV exposure causing fading, drying and cracking of leather over time.
• Oils, sweat and harsh cleaning chemicals that degrade leather and stitching.
• Physical damage from collisions or airbag deployment, which requires wheel replacement.

For workshops and self-repairers, matching the part numbers listed above ensures correct fitment for Peugeot 407 applications. This steering wheel restores factory appearance and driving feel while keeping replacement straightforward when proper safety and installation steps are followed.

Overview

High-quality steering wheel designed for Peugeot 307 CC and Peugeot 307. Supplied as shown in the photos, finished in grey (HZR – Grey Astrakan) and suitable for vehicles that use the original steering hub, airbag module and steering-column controls. Commonly searched under part numbers 96467818ZR and 4109EZ, this steering wheel is an excellent replacement for worn, damaged or cosmetically degraded original items.

Key Benefits

• Direct fit for Peugeot 307 CC and 307 (check fitment by part number: 96467818ZR / 4109EZ).
• OEM-style design that accepts factory airbag, horn and steering-switch modules.
• Attractive grey finish that restores interior appearance and driver comfort.
• Real photo of the actual item included to show condition and color.

Technical Information

• Manufacturer: Stellantis (Peugeot/Citroën)
• Model: Peugeot 307 CC, Peugeot 307
• Product Codes: 96467818ZR, 4109EZ
• Additional Numbers: NFP (as marked in supplier notes)

Installation Recommendations

• Disconnect the vehicle battery and wait the recommended manufacturer standby time before removing the airbag to avoid accidental deployment.
• Remove the airbag module and disconnect all electrical connectors (airbag, horn, steering controls) carefully. Keep connectors and terminals clean and undamaged.
• Loosen and remove the central steering-wheel nut/bolt, mark the wheel position relative to the column splines to ensure correct alignment on reinstallation.
• When refitting, align the splines precisely and torque the central fastening to the manufacturer’s specification. Do not operate the vehicle with a loosely fitted steering wheel.
• Verify correct function of the horn, steering-wheel controls, and airbag warning light after reconnection. If the clockspring (spiral cable) shows damage or electrical faults, replace or realign it before finishing assembly.
• Follow all safety procedures for handling airbag modules and use appropriate tools. If unsure, have the work performed by a qualified technician.

Why The Part Most Often Fails

• Cosmetic Wear: Leather or surface coatings fade, crack or become sticky from sunlight, oils and general use.
• Accident Damage: Airbag deployment or collision forces can deform or destroy the steering wheel.
• Electrical Faults: Wear or corrosion of contacts for horn and steering switches or damage to the clockspring can cause loss of function.
• Mechanical Wear: Worn splines or incorrect previous installation can lead to looseness or misalignment.
• Improper Handling: Damage during removal or installation (pins, connectors, airbag) can render the unit unusable.

Fitment And Search Tips

This steering wheel is often located by using OEM part numbers 96467818ZR and 4109EZ. It fits Peugeot 307 CC and standard Peugeot 307 models that share the same steering hub and airbag layout. Use the part numbers when searching to increase the chance of finding the correct match.

Final Notes

The item is supplied as shown in the photographs and is intended for those performing repairs themselves or professional workshops. Always follow manufacturer procedures and torque values when assembling steering components and ensure all safety systems are fully operational after installation.