This replacement steering wheel is designed for Citroën C8 and Peugeot 807 vehicles. It is a practical choice for professional workshops and experienced DIY mechanics who need a direct-fit steering wheel that restores driving comfort and control. The part is commonly searched by product codes, so you will find it listed under the original numbers shown below.

Features and Benefits

– Direct-fit design for Citroën C8 and Peugeot 807, offering correct mounting interface and wheel alignment when installed properly.
– Restores steering ergonomics, horn function and supports original steering controls where applicable.
– Durable construction suited for everyday use in passenger vans; ideal for both workshop repairs and owner maintenance.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Citroën C8 / Peugeot 807 (commonly fitted on model years 2002–2014)
• Product Codes: 14845640YR, 4109FH
• Additional Numbers: NFP

Installation Recommendations

Safety first: Disconnect the battery and wait the recommended time for SRS capacitors to discharge before starting work. Typical installation steps for a steering wheel replacement:

• Disconnect the battery and follow vehicle manufacturer safety procedures.
• Remove the airbag module carefully (if fitted) and disconnect all electrical connectors.
• Mark the steering column and wheel position to ensure correct wheel alignment on reassembly.
• Remove the central retaining nut and extract the wheel using an appropriate puller.
• Install the new wheel, align to marks, tighten the central nut to the vehicle manufacturer’s torque specification, and reconnect all electrical connections.
• After fitting, verify horn and steering control functions and clear any SRS or airbag fault codes using appropriate diagnostic equipment.

Why This Part Most Often Fails

Steering wheels rarely suffer mechanical failure but show wear for several reasons: long-term abrasion and oil/grease from hands lead to degraded leather or trim; buttons and switch pads can fail from repeated use; sun and UV exposure can cause fading and cracking; and airbag deployment during collisions will render the wheel and airbag module unusable. Electrical issues such as a damaged clockspring (spiral cable) can cause loss of horn, airbag warning lights or non-functional steering controls.

This steering wheel is a straightforward, high-value replacement for maintaining original driving feel and functionality in Citroën C8 and Peugeot 807 vehicles. Suitable for experienced mechanics and competent DIYers familiar with SRS precautions and steering system procedures.

This steering wheel is a direct-fit replacement for Citroën C8 and Peugeot 807 vehicles and is often searched for by its product codes 14845630YR and 4109AW. Designed to match the original interior aesthetics, the Alpaca Grey finish (HYR) provides a factory-like appearance and tactile feel. Ideal for professional workshops and competent DIY mechanics who require a precise, model-specific steering wheel.

Functionally, the steering wheel serves as the primary driver interface for vehicle direction, and it typically accommodates the airbag module, horn and steering-wheel-mounted controls when present on the original equipment. The unit is intended to restore ergonomics and safety after wear, cosmetic damage or following airbag deployment.

How To Replace

Replacement should be performed by a qualified technician or an experienced DIYer following safety precautions. General steps:

• Disconnect the negative battery terminal and wait at least 10–15 minutes to deactivate the airbag system.
• Remove any trim covers and unfasten the airbag retaining bolts; carefully disconnect airbag connectors and store the module face-up.
• Mark the steering column spline and wheel position to ensure correct alignment on reassembly.
• Remove the center bolt securing the steering wheel and extract the wheel using a suitable puller if necessary.
• Fit the replacement wheel, align the marks, tighten the center fastener to the manufacturer’s specified torque, reconnect the airbag and connectors, and reassemble trims.
• Reconnect the battery and verify that the airbag warning lamp extinguishes and that steering controls function correctly.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Citroën C8; Peugeot 807
• Product Codes: 14845630YR, 4109AW
• Additional Numbers: NFP (as provided)

Installation Recommendations

Always follow manufacturer’s safety procedures when working with airbag-equipped steering wheels. Use the correct tools—a torque wrench for the center nut and a steering wheel puller if the wheel is seized on the spline. Preserve alignment marks to maintain steering geometry and recalibrate any steering angle sensors if required by the vehicle after replacement. If uncertain about airbag handling, entrust the replacement to a professional workshop.

Why The Part Most Commonly Fails

Steering wheels are most often replaced due to cosmetic wear (surface cracking, abrasion, fading), physical damage from impacts or accidents, and following airbag deployment, which requires the steering wheel and airbag module to be replaced for safety. Additional causes include failure of integrated controls or degradation of trim materials from prolonged UV exposure and heavy use.

Buying a correctly coded replacement (14845630YR / 4109AW) ensures proper fitment and restoration of original driving ergonomics and appearance for Citroën C8 and Peugeot 807 vehicles.

This high-quality replacement steering wheel is designed for Citroën C8 and Peugeot 807 models and is commonly referenced by product codes 14845630ZD and 4109KP. Finished in Black Mistral (Color HZD), it restores original interior aesthetics and driving feel. The wheel is suitable for professional workshops and skilled DIY enthusiasts who perform steering and airbag-related repairs. Many customers search by part number when locating this item, so the listed codes help with quick identification.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Citroën C8, Peugeot 807
• Product Codes: 14845630ZD, 4109KP
• Additional Numbers: 14845630D (related reference)
• Color: HZD – Black Mistral
• Location: Interior – Steering Wheel

Fitment And Function

The steering wheel is a direct-fit replacement for the specified Citroën C8 and Peugeot 807 models when matching the above product codes. It provides the driver interface for vehicle steering, incorporates mounting points for the airbag and steering-column controls, and is finished to match the vehicle’s factory interior. Ensure that buttons, horn wiring and airbag connectors match the vehicle harness before installation.

Installation Recommendations

• Always Disconnect Battery First: Before any work, disconnect the vehicle battery and wait at least 10 minutes to reduce the risk of accidental airbag deployment.
• Mark Steering Alignment: Center the wheels and mark the relationship between the steering column spline and the wheel to preserve alignment.
• Airbag Removal: Remove the airbag module following manufacturer procedures and handle it carefully. Reinstall airbag connectors securely and ensure no wiring is pinched.
• Use Proper Tools: Remove the central retaining nut/bolt, and if the wheel is seized, use a suitable steering wheel puller to avoid damage.
• Tightening: Tighten the steering wheel retaining nut to the manufacturer’s specified torque value; if unknown, consult repair documentation for the exact figure.
• Check Clockspring: Inspect the clockspring (spiral cable) and steering-column switches when changing the wheel; replace if damaged or worn to ensure proper airbag and control function.
• Final Checks: After installation, verify horn, steering controls, and airbag warning light functionality. Perform a road test to confirm steering alignment and operation.

Why This Part Commonly Fails

Steering wheels rarely “fail” electrically, but they are subject to wear and damage from regular use and environmental exposure. Common issues include leather or trim wear, cracking, faded surfaces from sun exposure, damaged stitching, and worn control buttons. Damage can also occur from improper removal or impact accidents. In some cases, wiring for horn or steering controls can become loose or corroded, and the clockspring may wear out, causing intermittent function or airbag warning indicators.

Notes For Mechanics And DIYers

This steering wheel is often searched and ordered by part number (14845630ZD, 14845630D, 4109KP). When replacing the wheel, always verify that airbag connectors, steering-column controls and trim match the donor vehicle setup. Professional installation is recommended if you are not experienced with airbag systems or steering-column components.