This electric driver’s seat control is a direct-fit replacement unit designed for Citroën C5 first generation vehicles equipped with power-adjustable driver seats. Ideal for professional workshops and DIY mechanics, this control panel restores seat adjustment functions such as fore/aft travel, seat height, backrest angle and other motorized movements depending on the original vehicle equipment. The part is often searched by its product codes (for example 8914AL or 6554J3), making it easy to find for repair or replacement jobs.

Benefits Of Replacing The Seat Control: Restores Full Seat Adjustability, Improves Driver Comfort And Safety, Eliminates Intermittent Or Non-Working Positioning Functions, And Prevents Further Wear On Seat Motors Caused By Faulty Switching.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Citroën C5 First Generation (C5 I) – Driver Side Electric Seat Control
• Product Codes: 8914AL, 6554J3, 8914EH, 8914EG
• Other Numbers: NFP

Compatibility And Fitment

Designed primarily for Citroën C5 first-series vehicles fitted with factory electric driver seats. Compatibility depends on the original seat equipment and connector variant; the unit typically replaces the original switch assembly in the driver seat trim. Use the product codes above when searching to confirm fitment for a specific vehicle.

How The Part Works

The control assembly sends commands to the seat motors and position sensors when a driver operates the switches. Internally it contains electrical contacts, switch mechanisms and wiring connectors that control forward/back movement, height adjustment, backrest tilt and, where fitted, lumbar adjustments. A properly functioning control ensures smooth, repeatable seat movement and correct position memory behavior if the vehicle is so equipped.

Installation Recommendations

For safe and reliable replacement follow these general steps: Disconnect The Negative Battery Terminal Before Starting, Move The Seat To An Accessible Position, Remove The Seat Trim Panels To Access The Switch Assembly, Unplug The Electrical Connector(s) And Unscrew The Fasteners Holding The Control Unit, Install The New Control Unit, Reconnect The Electrical Connector(s), Refit Trim Panels And Reconnect The Battery. Check All Seat Functions After Reinstallation. Typical Replacement Time: Approximately 30–60 Minutes For A Skilled Technician; Allow More Time For Vehicles With Additional Trim Or Airbag/Seatbelt Sensor Integration.

Why This Part Most Commonly Fails

Failures Are Usually Caused By Mechanical Wear Of Switch Contacts, Corrosion Or Oxidation Of Electrical Connectors, Moisture Ingress From Spills, Or Damage From Excessive Force. Frequent Use And High Mileage Increase Wear On Moving Contacts And Internal Potentiometers, Leading To Intermittent Operation Or Complete Loss Of Function. In Some Cases, Wiring Harness Damage Or Faulty Seat Motors Can Present Similar Symptoms—diagnose Electrical Continuity And Connector Condition Before Replacing Motors.

Notes For Mechanics And DIY Enthusiasts

When ordering, use The Product Codes Listed Above To Find The Correct Unit. Inspect Connectors For Corrosion And Ensure Pin Contacts Are Straight Before Installation. If Multiple Seat Functions Are Failing Simultaneously, Check Fuses, Ground Points And Wiring Harnesses To Rule Out External Electrical Issues. Replacing The Control Assembly Often Restores Proper Function Without The Need To Replace Higher-Cost Components.

Premium replacement electric seat control module designed for the passenger seat of the Citroën C5 first generation. This unit restores full power adjustment functions — forward/backward travel, seatback tilt and any integrated lumbar or height adjustments (depending on the seat equipment). Ideal for professional workshops and DIY mechanics who need a direct-fit part identified by common part numbers such as 8914AK and 6554J3. Clear part-number references improve findability in searches and help match the correct item quickly.

Function And Benefits

The module controls the electric actuators inside the passenger seat, converting the switch commands into motor movements. Replacing a faulty seat control returns smooth, reliable seat positioning and restores any memory or comfort features tied to the seat electronics. Typical user benefits include precise seat adjustments, improved passenger comfort and elimination of intermittent or non-responsive controls.

Technical Information

• Manufacturer: Stellantis (Citroën)
• Model: Citroën C5 First Generation
• Product Codes: 8914AK
• Other Numbers: 6554J3, 8914EH, 8914EG NFP

Compatibility And Fitment

Designed for Citroën C5 first-generation passenger seats. Use the listed product codes to confirm fitment when searching parts catalogues or listings. The unit is typically fitted on versions equipped with electric adjustment of the front passenger seat — equipment may vary by trim level and production year.

Replacement Procedure (Overview)

General replacement steps for experienced mechanics or competent DIYers:

• Disconnect the vehicle battery before starting work to prevent short circuits and preserve safety.
• Move the seat to a position that provides access to mounting bolts and connectors.
• Remove lower trim panels or seat side covers to access the switch/control module and wiring harness.
• Carefully unplug electrical connectors and detach the control module from the seat frame or trim (note connector tabs and securing clips).
• Install the replacement unit in reverse order, reconnect connectors and reattach trim. Reconnect battery and verify full function of all seat movements.

Exact removal and refitment steps can vary by submodel; always follow manufacturer service instructions where available.

Installation Recommendations

• Always disconnect the battery before disassembly and wait a few minutes to allow capacitors/vehicle systems to discharge.
• Handle connectors and PCB-mounted switches with care to avoid damage to pins and plastic clips.
• Inspect wiring harnesses and connector pins for corrosion or damage and repair any issues before final assembly.
• After installation, cycle all seat functions to confirm smooth operation and check for any fault indicators on the vehicle.
• If the seat has memory functions tied to vehicle electronics, some models may require initialization or parameter checks after replacement — perform according to factory procedure.

Why This Part Fails Most Often

Common causes of failure include worn or pitted electrical contacts inside the switch assembly, ingress of dirt or moisture leading to corrosion, mechanical wear of internal switch mechanisms from frequent use, and damaged wiring or connector problems (pin corrosion or broken wires). In some cases, actuator motors present in the seat cause symptoms that mimic a faulty control module — diagnosing connectors and motor currents helps isolate the fault.

Notes For Professionals And Enthusiasts

This part is typically sought by technicians and independent enthusiasts by part number (e.g., 8914AK, 6554J3). When replacing, verify that the seat equipment level (height adjustment, lumbar, memory) matches the replacement module’s functions to ensure full compatibility.

The trim is designed to cover the rear of both the driver and passenger seats, featuring a pocket and a small table that can be conveniently used for holding items. This part is particularly beneficial for maintaining the overall look of your vehicle’s cabin while providing additional storage options.

Over time, seat trims can wear out due to constant use, exposure to sunlight, and general wear and tear. Frequently checking these parts and replacing them when necessary is key to preserving the interior of your vehicle.

Technical Information

• Manufacturer: Citroën/Peugeot
• Model: C5 I and II
• Product Codes: 8874SA
• Other Numbers: 8874SAK

Product Overview

High-quality leather seatback cover designed for the passenger side of Citroën C5 (2001–2007). This used cover is in preserved condition and retains the original grain, stitching and color tone (FZK – Tempete). Ideal for mechanics and DIY enthusiasts who want to restore the interior appearance or replace a damaged upholstery panel without buying a complete seat. Often searched by part numbers such as 8870JN, P5101665ZK or 30S3700025488.

Compatibility

Fits Citroën C5 passenger seatback manufactured between 2001 and 2007. Intended for original leather trim in color code FZK (Tempete). Verify visual match with existing upholstery and attachment points before installation.

Function And Typical Wear

The seatback cover protects the foam core and structural elements of the seat while providing the finished interior surface and comfort. Common signs of wear include surface abrasion, creasing, seam fraying, color fading from sun exposure and localized tears from sharp objects or frequent entry/exit. Leather can also stiffen or crack over time if exposed to harsh cleaners or left unconditioned.

Installation Recommendations

Recommended Tools: trim tools, Torx/Screwdriver set, upholstery clips, needle and thread or hog ring pliers if re-clamping is required.

• Remove Headrest: Start by removing the headrest and any trim panels that conceal fasteners.
• Detach Seatback From Car If Needed: For easier access you may need to tip or unbolt the seatback following manufacturer instructions.
• Release Fasteners: Unclip or unscrew retainers securing the old cover. Work methodically to avoid damaging foam or plastic clips.
• Slide Off Old Cover: Carefully pull the old cover off, noting routing of straps and positions of attachment points.
• Fit New Cover: Align the new leather cover, feed it over the foam and secure all clips, straps and fasteners. Ensure seams and panels align precisely for a factory appearance.
• Final Check: Reinstall trim and headrest. Confirm that all fasteners are secure and seatback operates normally.

Safety Note: If the seat contains integrated side airbags or wiring, do not tamper with airbag components. Disconnect the battery and follow safe procedures when working near airbag modules to avoid accidental deployment.

For the best finish and long-term durability, professional upholstery tools and experience are recommended, especially when reattaching edges and seams.

Reason For Most Common Failures

Failure Mostly Results From Normal Wear And Tear: Frequent use leads to abrasion and creasing at high-contact zones. Sunlight and heat accelerate leather deterioration and color fading. Improper cleaning agents can dry out and crack leather. Mechanical damage such as burns, cuts or overloaded seams is common in vehicles used intensively or exposed to pets and heavy objects.

Technical Information

• Manufacturer: Stellantis / Citroën
• Model: Citroën C5 (2001–2007)
• Product Codes: P5101665ZK, 30S3700025488, 8870JN
• Additional Numbers: Color FZK – TEMPETE

The cover not only enhances the aesthetic appeal of your vehicle but also protects the original upholstery from wear and tear, making it an essential addition for any car enthusiast. It’s especially ideal for DIY mechanics looking for reliable parts to maintain their vehicles.

Replacing the seat cover is straightforward and can generally be completed with minimal tools. It’s recommended to check the condition of your existing cover to determine if a replacement is necessary, especially if you have pets or frequently transport passengers.

Technical Information

• Manufacturer: Citroën
• Model: C5
• Product Codes: 8870EK
• Other Numbers: FZK – TEMPETE

The Driver Seat Cover offers a precise fit for Citroën C5 and is easy to install, ensuring a seamless integration with your vehicle’s interior. It is essential for maintaining the value of your car, as wear and tear on seat covers can lead to damage of the underlying materials.

Frequent issues with seat covers include fading and wear, particularly in high-use areas. A replacement cover helps prevent further deterioration, ensuring your seating remains comfortable and visually appealing.

Technical Information

• Manufacturer: Citroën
• Model: C5 (2001 – 2007)
• Product Codes: P5101664ZK, 30S3700025470, 8870JK
• Other Numbers: Not specified

Don’t miss the opportunity to rejuvenate your Citroën C5 with this black leather Driver Seat Cover, combining style and functionality for the ultimate driving experience.

Replacing your driver’s seat cover can often become necessary due to wear and tear from regular use, which may lead to visible damage over time. The seat cover serves to protect your original upholstery while adding a touch of luxury to your ride. Installation is straightforward, typically requiring only basic tools and a little time to remove the old cover and secure the new one in place.

This product is compatible with Citroën C5 models produced between 2001 and 2007 and can also fit various Peugeot models that share a similar design. With this cover, you will not only restore the appearance of your seat but also increase its longevity by protecting it from everyday wear.

Technical Information

Manufacturer: Citroën
Model: C5 (2001-2007)
Product Codes: 8870EK
Other Numbers: N/A

Installation is straightforward: simply remove the old cover and replace it with this new one, ensuring a snug fit that matches the original upholstery. This product is ideal for those looking to refresh the car’s interior or replace a worn-out seat cover.

Over time, seat covers may degrade due to frequent use and exposure to elements, leading to wear and tear. Regularly replacing your seat cover can maintain both aesthetics and comfort, making every journey enjoyable.

Technical Information

• Manufacturer: PSA Citroën Peugeot
• Model: Citroën C5 (2001 – 2007)
• Product Codes: 8870JX
• Additional Numbers: N/A