Right front passenger seat belt designed for the Peugeot 607. This passenger-side safety belt is supplied in black (color code FXX) and carries the common OEM reference numbers used by PSA vehicles. It is intended for direct replacement of a worn, damaged or deployed original belt to restore occupant restraint performance.

Key Benefits

• Direct fit for Peugeot 607 passenger-side applications: quick swap-in for workshop or DIY repairs.
• Includes OEM-style connections and mounting points to match factory installation.
• Durable black webbing suitable for OEM interior matching.
• Listed by common PSA product codes for easy lookup and ordering.

Function And Typical Failure Modes

The seat belt assembly secures the front passenger during normal driving and locks under sudden deceleration. Typical reasons for replacement include frayed or cut webbing, retractor failure (inertial lock or jam), visible damage to the buckle or tongue, or activation of the pretensioner in a collision. There is no fixed service interval—inspect belts after any accident or when wear and damage are observed.

Replacement Notes For Mechanics And DIY

Removal and fitting generally involve removing interior trim around the B-pillar and lower anchor, unbolting the retractor and buckle, transferring electrical connectors where present, and installing the new assembly. Because many modern belts include an SRS pretensioner, always disconnect the vehicle battery before work and wait the manufacturer-recommended time (commonly at least 10 minutes) to allow the airbag system to discharge. Tighten mounting bolts to factory torque values as specified in the service manual and verify full free movement and correct locking when tested by pulling sharply.

When To Replace

Replace the belt if webbing is torn, stitched areas are damaged, the retractor fails to retract or lock correctly, the buckle does not latch securely, or after any crash where the pretensioner has activated. Also replace if mounting hardware is corroded or deformed.

Technical Information

• Manufacturer: PSA Peugeot Citroën
• Model: Peugeot 607
• Product Codes: 96491282XX, 96355511XX, 8973ZR
• Other Numbers: NFP

Compatibility & Ordering Tips

Search by the listed OEM codes for the fastest match: 96491282XX, 96355511XX, 8973ZR. These references are commonly used when sourcing passenger-side belts for PSA vehicles. If in doubt, compare the part visually or consult the vehicle’s repair manual to confirm mounting and connector compatibility before purchase.

Safety Reminder

Seat belts are a primary safety device. If you are unsure about removal or fitment, have the replacement carried out by a qualified technician to ensure correct installation and proper operation of associated SRS components.

Left front seat belt designed for the driver’s side of the Peugeot 607. This replacement belt is supplied in black (color code FXX) and is commonly identified by the product codes 96491283XX and 8974CH. It’s intended for professional workshops and DIY motorists who search by part number for a direct fit.

Function And Common Faults

The seat belt restrains the occupant and works together with the retractor, locking mechanism and buckle to provide safety in sudden deceleration or collisions. Common reasons for replacement include frayed or cut webbing, failure of the retractor or locking mechanism, activation of a pretensioner during an accident, contamination or corrosion of mounting hardware, and deteriorated stitching.

Replacement And Installation Notes

Installation should be performed by a qualified technician or an experienced DIYer comfortable with vehicle safety systems. Basic replacement steps:

• Disconnect the vehicle battery and wait to ensure airbag systems are inactive.
• Remove interior trim on the B-pillar to expose the retractor and anchor bolts.
• Unbolt the lower anchor and the retractor unit; transfer any mounts or guides if required.
• Fit the new belt assembly and tighten bolts to the manufacturer’s torque specifications.
• Reinstall trim and reconnect the battery; check belt retraction, locking action and buckle engagement.

Always follow manufacturer procedures for SRS/airbag safety and torque values. If the belt has been involved in an accident or the pretensioner has activated, replacement is mandatory.

Why Replace This Part

Seat belts do not have a fixed service interval but must be replaced if they show visible damage, fail to retract, lock improperly, or have been deployed in a collision. Replacing a worn or damaged belt restores occupant protection and ensures compliance with safety standards.

Compatibility And Fitment

Designed for the Peugeot 607. Always verify fit by matching the vehicle VIN and the part numbers 96491283XX or 8974CH. The belt is supplied in black (FXX). If you’re unsure about fitment, contact a technician with your vehicle details before ordering.

Technical Information

• Manufacturer: PSA / Peugeot
• Model: Peugeot 607 (Left Front / Driver’s Side)
• Product Codes: 96491283XX, 8974CH
• Additional Numbers: NFP

Order by product code for the fastest match. If you need assistance, provide the vehicle VIN and model year to ensure correct selection.