This genuine-style passenger seat belt lock bracket secures the seat belt buckle receiver on the front passenger side of the Peugeot 407. It restores correct positioning and reliable operation of the buckle, helping to ensure proper restraint performance after damage or wear. Frequently searched under OEM codes 8975P6 and 8975AS, this bracket is a direct-fit replacement aimed at professionals and competent DIY mechanics who need a dependable spare part for repairs.

Technical Information

• Manufacturer: Peugeot (Stellantis)
• Model: Peugeot 407
• Product Codes: 8975P6, 8975AS
• Additional Numbers: Color Code FXX

Function And Fitment

The bracket holds the seat belt buckle receiver in the correct position relative to the passenger seat and vehicle body. It is designed as a direct replacement for the original part on Peugeot 407 vehicles that use the listed product codes. Proper bracket alignment is essential for reliable buckle engagement and passenger safety.

Installation Recommendations

• Prepare: Work on a flat surface with the vehicle parked and the ignition off. For safety, disconnect the negative battery terminal if the vehicle has belt pretensioners or related sensors in the buckle assembly.
• Access: Remove the seat trim or center console trim as required to expose the mounting bolts and any wiring for buckle sensors.
• Removal: Unbolt the old bracket and carefully release any connectors or clips. Inspect mounting points and wiring for damage.
• Fitting: Fit the replacement bracket in the same orientation, reconnect any sensors, and tighten mounting bolts to the manufacturer’s torque specifications.
• Check: Verify correct buckle engagement and movement. Reinstall trim, reconnect the battery (if disconnected) and verify warning lights and belt latch function before returning the vehicle to service.

Why This Part Most Often Fails

Failure of the passenger seat belt lock bracket is most commonly caused by collision damage, which can bend or crack the bracket or its mounting points. Corrosion from moisture and road salt can seize fasteners or weaken metal over time. Other causes include broken plastic housings, damaged clips, or wear from repeated stress and improper installation. If sensors or wiring are damaged, the buckle may also cause a seat belt warning light or prevent correct pretensioner operation.

Practical Notes For Mechanics And DIYers

This part is intended for use by trained technicians and competent DIYers familiar with seat trim removal and vehicle safety systems. Keep the OEM product codes (8975P6, 8975AS) handy when searching or ordering to ensure correct fitment. After replacement, always confirm that the belt latches securely and that no airbag or seat belt warning indicators remain illuminated.

This rear seat belt set is designed for professional workshops and DIY enthusiasts who service Peugeot 407 vehicles. It supplies both left and right rear safety belts, delivering the same essential restraint function as the original equipment: securing rear passengers, managing deceleration forces and working with the vehicle’s restraint system. The belt assembly is finished in Colour FXX Black to match standard Peugeot 407 interiors and is commonly referenced by part numbers 96440739XX and 8974HK — useful keywords for fast search and identification.

The component is intended as a direct replacement for worn, frayed or mechanically-faulty rear belts. Typical reasons to replace include belt webbing damage, locking/retraction failure, or damage to the anchorage or retracting mechanism after impact. Replacing both sides at the same time ensures consistent operation and appearance.

Technical Information

Manufacturer: Stellantis / Peugeot / Citroën
Model: Peugeot 407
Product Codes: 96440739XX, 8974HK
Additional Numbers: 8974HK, 96440739xx

Function And Fitment

The rear seat belt assembly consists of the webbing, retractor mechanism and anchorage hardware. Its purpose is to restrain rear-seat occupants during sudden deceleration or collision, cooperating with the car’s overall occupant protection system. This part fits the left and right rear seating positions on Peugeot 407 models that use the FXX black interior colour scheme.

Installation Recommendations

• Disconnect the battery before working near any restraint system components to avoid triggering seat-belt pretensioners or airbags.
• Remove interior trim panels and access covers to expose the retractor and lower anchorage bolts.
• Unbolt the retractor and anchorage hardware, disconnect any electrical connectors only if present and identifiable (pretensioner connectors). Keep connectors free from dirt and moisture.
• Install the new belt assembly in reverse order, routing the webbing exactly as the original. Ensure the retractor is mounted upright and the webbing moves freely through its guide.
• Tighten all fasteners to the vehicle manufacturer’s torque specifications and verify secure anchorage. Do not exceed or under-torque; use a calibrated torque wrench.
• Perform a functional check: belt should extend and retract smoothly and lock under a brisk pull. Inspect trim fitment and run a road test at low speed to confirm correct operation.

Why This Part Fails Most Often

The most common causes of rear seat belt failure are wear and abrasion of the webbing (chafing against sharp edges or repeated folding), contamination with chemicals or dirt that degrade materials, failure of the retractor spring or locking mechanism, and damage to anchors or pretensioners after a collision. Retractor failure may present as a belt that will not lock, will not retract, or retracts intermittently. Webbing damage or fraying reduces energy absorption capability and mandates replacement.

Tips For Purchase And Use

Search for the part using OEM codes 96440739XX and 8974HK to find matching items quickly. When replacing seat belts, always inspect associated bolts, anchor points and trim for hidden damage. Replace any components that show corrosion, deformation or play. After installation, keep records of the replacement and note the vehicle position (left or right rear) for future reference.

Product Overview

High-quality replacement driver seat belt buckle holder designed for Peugeot 407 vehicles. This used part carries the original product code 8975AR and features a black FXX finish. It is aimed at professional mechanics and experienced DIY enthusiasts who need a reliable, direct-fit component to restore seat belt anchorage and passenger safety after wear or damage.

Key Benefits

• Direct fit for fast, hassle-free replacement when matched by part number (8975AR).
• Black FXX finish for discreet appearance that matches interior trims.
• Designed to restore correct seat belt anchorage and buckle positioning on the driver side.
• Suitable for workshop and home repairs — ideal for technicians and skilled DIYers.

Technical Information

• Manufacturer: Stellantis (Citroën/Peugeot)
• Model: Peugeot 407
• Product Codes: 8975AR
• Other Numbers: Color FXX (Black)

Compatibility And Fitment

Designed for the driver side of Peugeot 407 models. The part is commonly referenced by the product code 8975AR; searching by this code improves the chance of finding the correct fitment. Verify visual match with the original part and its mounting points before installation.

Installation Recommendations

Recommended for professional installation or by experienced DIY mechanics. Basic replacement steps:

• Before starting, disconnect the vehicle battery to avoid accidental airbag deployment and electrical damage.
• Remove the relevant interior trim panels to access the buckle holder and retain any clips for reuse or replacement.
• Unbolt the existing buckle holder from its anchorage point, disconnect any electrical connectors if present, and remove the old unit.
• Fit the replacement holder in the original position, secure with the original bolts and hardware, and tighten to the manufacturer’s specified torque values using a calibrated torque wrench.
• Reinstall trim panels and reconnect the battery. Test the buckle for correct latching, release, and alignment. Ensure the seat belt retracts and locks as intended.

Why The Part Commonly Fails

Seat belt buckle holders most frequently fail due to impacts from collisions, corrosion of mounting points, broken plastic clips or wear from repeated use. Damage to the buckle assembly or deformation of the bracket after an accident are the most common reasons for replacement. Dirt, foreign objects in the buckle or weakened mounting hardware can also cause latch malfunction or improper seating.

Additional Notes

This item is often searched by its product code 8975AR. Always follow Peugeot workshop procedures when performing safety-critical repairs and replace any damaged bolts, clips, or trim fasteners to ensure proper function and safety.

This rear seat belt is designed for both left and right sides of the Peugeot 407, featuring the product codes 96463299XX and 8974HJ. It comes in a sleek black FXX color, seamlessly matching your vehicle’s interior while providing the essential safety features required for passenger protection.

Seat belts are a critical safety component, helping to secure all passengers and comply with vehicle safety regulations. This rear seat belt has been specifically chosen for compatibility with the Peugeot 407, ensuring optimal fit and reliable performance.

Technical Information

• Manufacturer: PSA CITROEN PEUGEOT
• Model: Peugeot 407
• Product Codes: 96463299XX, 8974HJ
• Additional Numbers: NFP

Maintaining your Peugeot 407 with high-quality replacement parts like this rear seat belt helps preserve both safety and the original aesthetic of your vehicle’s interior. This part is ideal for professional mechanics and car enthusiasts undertaking self-repairs, demanding dependable and functional components.

Upgrade your vehicle’s safety today by installing this essential rear seat belt. Ensure safer journeys for you and your passengers with a product that meets strict quality and reliability criteria.

Product Overview

This passenger seat belt buckle bracket is a direct-fit replacement designed for Peugeot 407 vehicles. Finished in durable FXX black, the bracket secures the seat belt buckle to the vehicle structure and ensures correct anchorage and function of the passenger restraint system. Frequently searched by product codes 8973PV and 8974S9, this component is suited for professional workshops and DIY mechanics who require a reliable safety-related part.

Key Features

• Direct-fit replacement for Peugeot 407.
• Durable steel construction with black FXX coating for corrosion resistance.
• Compatible with standard passenger seat belt buckles used in the Peugeot 407 range.
• Often identified by product codes 8973PV and 8974S9 for fast lookup.

Technical Information

• Manufacturer: Stellantis / Peugeot
• Model: Peugeot 407
• Product Codes: 8973PV, 8974S9
• Other Numbers: 8973pV

Fitment Notes

Designed primarily for the Peugeot 407 model range. Compatible with standard passenger seat configurations used on Peugeot 407. Verify the product code (8973PV / 8974S9) against the part required for your vehicle when placing an order to ensure an exact match.

Installation Recommendations

• Disconnect the battery before starting work and follow the vehicle manufacturer’s safety procedures.
• Remove any interior trim or center console panels necessary to access the mounting bolts of the bracket.
• Unbolt the old bracket from the vehicle body, inspect surrounding mounting points and wiring (if present) for damage or corrosion.
• Install the new bracket, secure bolts and fasteners, and tighten to the manufacturer’s torque specifications.
• Check that the seat belt buckle engages and releases smoothly and that the buckle is positioned correctly relative to the seat.
• After installation, perform a visual inspection and functional check before returning the vehicle to service.

Why This Part Fails

Seat belt buckle brackets typically fail due to one or more of the following causes: impact damage from collisions, corrosion where mounting points are exposed to moisture or road salt, sheared or stripped mounting bolts, and deformation from improper loading or prior repairs. In normal conditions the bracket is durable and may not need replacement unless affected by the issues above or following accident repairs.

Practical Tips for Workshops and DIY Mechanics

• Always keep replacement bolts and correct fasteners on hand when replacing safety-critical components.
• Inspect the seat belt buckle and harness for any signs of damage or wear when replacing the bracket; replace any compromised belt components.
• If the vehicle has been involved in a collision, check adjacent structures and mounting points for hidden damage before fitting the new bracket.

Ordering Information

Search or order by product codes 8973PV or 8974S9 to locate the exact item for Peugeot 407 fitment. The part is supplied in black FXX finish as indicated.

This left front pyro seat belt assembly is designed for the Driver’s position on Peugeot 407 vehicles and integrates a pyrotechnic pretensioner for rapid restraint in an impact. Ideal for professional workshops and experienced DIYers, the unit is commonly searched by its part numbers and offers a direct replacement to restore the vehicle’s occupant restraint performance after wear or collision. Fitment by qualified personnel is recommended due to the integrated SRS (Supplemental Restraint System) components.

Technical Information

• Manufacturer: Peugeot (Stellantis)
• Model: Peugeot 407
• Product Codes: 96439575XX, 8974HG
• Other Numbers: NFP

Compatibility And Fitment

Intended for the Left Front (Driver) seat of Peugeot 407 models. Always confirm the part number against the vehicle’s existing belt assembly when possible. This assembly is typically used on standard Peugeot 407 variants—check physical match to mounting points and connector type before final installation.

Function And Performance

The unit combines the lap/shoulder webbing, retractor mechanism and a pyrotechnic pretensioner. During a significant frontal or near-frontal impact the pretensioner activates to remove slack from the belt instantly, improving occupant restraint and working together with airbags to reduce injury risk. The retractor provides normal belt locking under sudden deceleration and allows free movement during normal use.

Typical Failure Modes And Why They Occur

• Deployment: The pretensioner is a single-use pyrotechnic device and will be non-functional after activation in a crash.
• Corrosion and Moisture: Water ingress or corrosion at mounting points and connectors can cause electrical or mechanical failure of the retractor/pretensioner.
• Wear And Damage: Webbing abrasion, fraying, or damage from improper routing reduce effectiveness and require replacement.
• Connector/Wiring Faults: Damaged SRS connectors or wiring can prevent pretensioner activation or trigger warning lights.

Replacement Procedure And Recommendations

Safety First: The pretensioner is a pyrotechnic component. Before any work, disconnect the vehicle battery and wait at least 10 minutes (or follow the vehicle manufacturer’s recommended waiting time) to allow the SRS system to discharge. Use appropriate personal protective equipment and avoid exposing the unit to heat, impact or open flame.

1. Disconnect battery and secure vehicle.
2. Remove interior trim panels and seatbelt covers to access the retractor, anchor and buckle fixation points.
3. Unplug electrical connector for the pretensioner—handle connectors carefully and avoid pulling on wires.
4. Remove mounting bolts securing the retractor and lower anchor. Keep track of any washers or spacers.
5. Fit the new assembly in the correct orientation, ensuring the webbing routing matches the original installation.
6. Tighten mounting bolts to the vehicle manufacturer’s torque specification and reconnect the electrical connector securely.
7. Reinstall trim, reconnect the battery and verify SRS system status with an appropriate diagnostic tool. Clear any fault codes only after addressing the root cause.

Use new mounting hardware if the manufacturer specifies one-time-use bolts. Never attempt to modify or disassemble the pretensioner. After a collision where the pretensioner has fired, the entire assembly must be replaced.

Installation Advice For Mechanics And Experienced DIYers

This replacement is suitable for professional workshops and experienced home mechanics who have SRS knowledge. Ensure you have the correct tools and, if available, a diagnostic scanner to confirm SRS integrity after installation. Keep the belt routed exactly as the original and check that the buckle and locking mechanism operate smoothly before returning the vehicle to service.

Why Choose This Part

Buying the correct left front pyro seat belt restores proper occupant protection and helps ensure the SRS functions as designed. Customers searching by part numbers 96439575XX or 8974HG will find direct-fit compatibility and a solution intended to match the original assembly used on Peugeot 407 vehicles.

This seat belt assembly with integrated pyrotechnic pretensioner is intended as a direct replacement for the right front (passenger side) of Peugeot 407 vehicles. Ideal for professional workshops and experienced DIY mechanics, the unit restores the passive restraint system’s ability to remove slack and lock reliably in a collision. The part is commonly searched by product numbers and original equipment references such as 96439574XX and 8974HH.

Features And Function

The assembly combines a webbing retractor, locking mechanism and a pyrotechnic pretensioner. During a severe impact the pretensioner activates to rapidly take up slack in the belt, improving occupant restraint and interaction with the airbag. The retractor provides normal belt tensioning and emergency locking under sudden deceleration. Color: FXX Black.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Peugeot 407
• Product Codes: 96439574XX, 8974HH, NFP
• Additional Numbers: 8974HH
• Condition: Used Part
• Location: Right Front Passenger Side
• Color: FXX Black

Replacement Procedure

• Ensure Safety: Disconnect the vehicle battery and wait at least 10 minutes before starting work to avoid accidental pretensioner activation.
• Remove Interior Trim: Carefully remove the relevant B-pillar and side trim panels to access the belt retractor and upper anchor points.
• Disconnect Electrical Connector: Unplug the pretensioner electrical connector before unbolting the unit.
• Unbolt Retractor And Anchors: Remove the mounting bolts securing the retractor and lower anchor. Keep fasteners and note routing of the webbing.
• Fit New Unit: Install the replacement unit in reverse order, ensuring correct webbing routing and fully seated connectors.
• Final Checks: Tighten all fasteners to manufacturer torque specifications and perform an SRS system check with a diagnostic tool to clear related fault codes and verify functionality.

Installation Recommendations

• Always Follow Manufacturer Procedures And Torque Specs When Reinstalling Fasteners.
• Do Not Use A Seat Belt That Shows Signs Of Deployment, Damage, Or Severely Worn Webbing.
• After Installation, Run An SRS Diagnostic To Confirm Pretensioner And Airbag Systems Are Operational.
• Handle The Pretensioner Connector Carefully To Avoid Bending Pins Or Causing Corrosion.
• If Uncertain, Have The Replacement Completed By A Qualified Technician.

Most Common Failure Reasons

• Activation During A Collision: Pyrotechnic Pretensioners Are Single-Use And Must Be Replaced After Deployment.
• Mechanical Wear And Fraying Of The Webbing Due To Long-Term Use Or Abrasion.
• Corrosion Or Seizure Of Retractor Components, Especially In Vehicles Exposed To Moisture.
• Electrical Connector Damage Or Corrosion Causing Loss Of Pretensioner Function.
• Impact Or Abuse To The B-Pillar Area Leading To Misalignment Or Bolt Damage.

Part numbers and visual characteristics are frequently used to identify the correct replacement; searches by codes 96439574XX and 8974HH should help locate compatible units for the Peugeot 407. For safe and reliable operation replace any belt assembly that has been deployed, damaged or shows significant wear.