This left rear seat belt is designed for Peugeot 307 CC owners and professionals seeking a direct-fit safety replacement. Ideal for mechanics and experienced DIYers, the belt restores occupant restraint functionality on the driver-side rear seat. Frequently searched by part number 8974JX, this component helps maintain vehicle safety standards after wear, damage, or following a collision. The design matches original equipment form and mounting points to ensure correct routing and reliable operation when installed according to manufacturer guidelines.

Technical Information

• Manufacturer: Stellantis / Citroën / Peugeot
• Model: Peugeot 307 CC
• Product Codes: 8974JX
• Additional Numbers: NFP

Function And Fitment

The seat belt assembly secures rear-seat occupants by locking webbing during rapid deceleration and maintaining proper positioning in normal driving. This unit is specified for the left rear position (rear, driver side) of the Peugeot 307 CC and is supplied without the buckle. Compatibility is commonly referenced by the part number 8974JX; ensure the belt matches your vehicle’s mounting layout and connector type before fitting.

Replacement Guidance

Replacing a rear seat belt typically involves the following steps and precautions. These notes are intended for qualified technicians or experienced DIYers:

• Prepare: Park on level ground, set the parking brake, and work with adequate lighting and trim tools to avoid damaging panels.
• Safety First: Before working near pyrotechnic components (pretensioners) or airbag systems, disconnect the vehicle battery and wait the manufacturer-specified time for system discharge. Follow vehicle manufacturer procedures for SRS work.
• Access: Remove interior trim panels to expose the belt retractor, anchor bolts, and routing points.
• Unfasten: Remove bolts securing the retractor and lower anchor. Keep track of bolt types and locations for reassembly.
• Fit New Unit: Position the new belt assembly, route the webbing exactly as the original, and hand-thread bolts before torquing to manufacturer specifications.
• Torque And Test: Tighten mounting bolts to the vehicle manufacturer’s torque values. Check webbing movement, automatic locking function, and correct stowage. Reassemble trim and perform a final functional check.

Installation Recommendation

Use OEM or equivalent fasteners and follow Peugeot torque specifications for all anchoring points. Because seat belt systems are integral to occupant safety, final checks must ensure the retractor locks under a sharp pull and the webbing is free of twists. If the assembly includes a pretensioner or shows signs of prior activation, replace the entire affected restraint component. If uncertain, have installation verified by a qualified technician.

Why The Part Most Often Fails

• Accident Impact: Pretensioners can activate during a collision, rendering the retractor or webbing unusable.
• Wear And Tear: Fraying, contamination, or abrasion of the webbing from repeated use or sharp edges reduces strength and can lead to failure.
• Retractor Problems: Internal mechanisms can seize or lose spring tension, causing the belt to fail to retract or lock properly.
• Corrosion And Fastener Degradation: Mounting bolts and anchorage points exposed to moisture or salts may corrode, compromising secure attachment.
• Improper Use Or Installation: Incorrect routing, twisted webbing, or loose mounting can prevent correct operation.

Additional Notes

Searches for this part are often performed using the code 8974JX. Replace seat belts after any collision or if the webbing or mechanism shows visible damage. Always follow Peugeot service procedures for safe and compliant installation.

Used replacement seat belt designed for the right rear (passenger side) of the Peugeot 307 CC. This part restores proper passenger restraint after damage or wear and is often searched under the product code 8974JY. Suitable for professional workshops and experienced DIY mechanics who need a direct-fit, vehicle-specific belt assembly without the buckle.

Technical Information

• Manufacturer: Stellantis / Peugeot
• Model: Peugeot 307 CC (Right Rear – Passenger Side)
• Product Codes: 8974JY
• Additional Numbers: NFP

Fitment And Function

This seat belt assembly secures the right rear passenger in the Peugeot 307 CC. It consists of the webbing and retractor assembly provided without the buckle. The retractor locks the belt under sudden deceleration and retracts the webbing when not in use. Correct fitment ensures occupant protection and proper system operation in conjunction with vehicle seat belt anchor points and any vehicle-integrated pretensioner system.

Installation Recommendations

• Follow Manufacturer Procedures: Always follow Peugeot service instructions for removal and installation. Work should be carried out by a trained mechanic or a competent DIYer familiar with vehicle restraint systems.
• Safety First: If the vehicle is equipped with belt pretensioners or SRS components, disconnect the battery and wait the manufacturer-specified time before starting work to avoid accidental deployment.
• Remove Interior Trim Carefully: Access the retractor and anchor bolts by removing the trim panels without damaging clips or wiring.
• Replace Fasteners Correctly: Use original or equivalent grade bolts and tighten to the manufacturer-specified torque. Do Not Reuse Damaged Anchors.
• Check Webbing And Routing: Ensure the belt webbing runs without twists and that the retractor operates smoothly. Verify the belt locks under sudden pull.
• Post-Installation Check: Inspect anchor points, belt travel, and retractor function. If the vehicle has a pretensioner, confirm SRS warning lights behaviour after reconnection according to the workshop manual.

Reasons Why This Part Fails Most Often

• Wear And Abrasion: Repeated use causes webbing fraying or weakening, especially where it rubs on trim or seat edges.
• Retractor Malfunction: Dirt, corrosion, or internal spring/fork wear can prevent proper retraction or locking.
• Corrosion Of Anchors: Moisture ingress can corrode bolts and anchor points, compromising strength.
• Pretensioner Deployment: In an accident the pretensioner will activate and that seat belt assembly must be replaced.
• Contamination And Foreign Objects: Spills, grit, or objects trapped in the mechanism can impair operation.

Notes

Supplied Without Buckle. Often Searched By Product Code 8974JY. Ideal For Mechanics And Experienced DIY Repairers Looking For A Direct-Fit Replacement For The Peugeot 307 CC Right Rear Seat Belt. Order Now To Restore Safety And Compliance With Vehicle Restraint Functionality.

Description

High-quality replacement passenger seat belt designed for the Peugeot 308 (T7). Ideal for workshops and DIY mechanics looking for a direct-fit safety belt that restores occupant protection after damage or wear. Commonly searched under manufacturer part numbers 96768385XX and 8976S2 — include these codes in your search to find the exact match for your vehicle.

Key Features And Benefits

• Direct Fit For Peugeot 308 T7: Designed to match factory mounting points and belt routing for an accurate, secure installation.
• OEM-Style Finish: Color code FXX – Black — matches the original interior trim of compatible vehicles.
• Durable Construction: Reinforced webbing and corrosion-resistant hardware for long service life under normal use.
• Fast Identification: Frequently found under part numbers 96768385XX and 8976S2 for quicker ordering and verification.

Function

The seat belt restrains the front passenger during sudden deceleration or collisions, reducing the risk of injury. It locks via an internal retractor mechanism when subjected to rapid movement, and the buckle/latch secures the passenger to the vehicle structure.

Replacement And Installation Overview

Replacing the passenger seat belt is a repair within the scope of experienced mechanics and competent DIYers with basic tools. Typical steps include:

• Remove trim panels and the seat (if required) to access mounting bolts.
• Unbolt the lower anchor and upper anchorage point, then disconnect the buckle if it is secured separately.
• Fit the new belt, route it exactly as the original, and torque all fasteners to manufacturer specifications.
• Check free movement of the retractor and correct engagement of the buckle.

After installation, perform a visual inspection and a functional check: slow pull to verify smooth extraction/retraction and a sharp tug to confirm locking action.

Mounting Recommendations

• Always Use Correct Torque: Tighten mounting bolts to the vehicle manufacturer’s specified torque values.
• Inspect Mounting Points: Ensure threads, anchor plates, and surrounding structure are undamaged and free of corrosion before installation.
• Replace After Deployment Or Damage: If the belt has been subjected to a crash load (deployment event) or shows visible fraying/cuts, replace it — do not reuse a deployed belt.
• Use Proper Tools: Torx/sockets and a calibrated torque wrench are typically required; follow workshop manual procedures for disassembly and reassembly.
• Battery Safety: When working near SRS components or pretensioners, disconnect the battery and wait the time recommended by the manufacturer to avoid accidental deployment.

Why This Part Commonly Fails

• Wear And Tear: Repeated use over many years can cause webbing abrasion, fading, and weakened stitching.
• Accident Loads: Activation or heavy loads during a collision can stretch or damage the belt and its internal components.
• Contamination: Oils, chemicals, or dirt can degrade webbing and mechanisms, impairing retraction or locking.
• Corrosion Or Damaged Hardware: Exposure to moisture and road salt can corrode mounting bolts and anchor plates, compromising attachment strength.

Technical Information

• Manufacturer: Stellantis / Peugeot
• Model: Peugeot 308 T7
• Product Codes: 96768385XX, 8976S2
• Additional Numbers: Color Code FXX

Compatibility Note

Intended For Peugeot 308 (T7). Always verify the part number (96768385XX or 8976S2) against the vehicle’s original component markings before purchase to ensure correct fitment.

Final Tips For Buyers

For workshop professionals: Keep the vehicle manufacturer’s repair manual at hand and follow specified torque and safety procedures. For DIYers: If in doubt about dealing with pretensioners or SRS-related components, seek professional help to ensure safe and correct installation.

High-quality replacement rear center three-point seat belt designed for Peugeot 308 T7 models. This part corresponds to original equipment specifications and is commonly searched under product codes 96589932XX, 8975L9 and reference 8975GY. Intended for professional workshops and competent DIY mechanics, the assembly restores correct restraint performance for the rear middle passenger and helps maintain vehicle safety standards.

The belt features durable black webbing (Color FXX), reinforced anchor points and an integrated retractor with buckle interface compatible with factory mounting locations. It provides three-point restraint for the center rear seating position and is supplied as a direct replacement for the OEM unit.

Technical Information

• Manufacturer: Stellantis (Peugeot / Citroën)
• Model: Peugeot 308 T7 — Rear Center Seat Belt
• Product Codes: 96589932XX, 8975L9
• Other Numbers: 8975GY
• Color: FXX – Black

Installation Recommendations

Park the vehicle on a level surface and work in a safe, well-lit area. If the belt assembly includes an electronic buckle sensor or pretensioner connected to the SRS system, disconnect the battery and wait the manufacturer-recommended time before beginning work to avoid accidental deployment. Remove interior trim panels as required to access the shoulder and lower anchor bolts. Unbolt the old assembly, disconnect any electrical connectors, and remove the unit. Fit the new belt ensuring the webbing is not twisted and that mounting points align with original positions. Secure bolts to the manufacturer’s torque specification and reconnect any electrical connectors. Verify correct retraction, locking under sudden pull, and buckle engagement. If the assembly contains a pretensioner or sensor, perform an SRS system check with appropriate diagnostic equipment after installation.

Why It Usually Fails

Seat belts commonly fail due to webbing wear or fraying from abrasion, contamination with dirt or chemicals, or mechanical jamming of the retractor. Pretensioners and buckles may become inoperative after a collision or due to internal wear and debris. Long-term exposure to sunlight and contaminants accelerates degradation. As a safety rule, replace any belt that shows visible damage, does not retract smoothly, fails to lock, or has been involved in an impact event.

Maintenance And Expected Service Life

There is no fixed replacement interval for seat belts under normal conditions, but periodic inspection is essential. Replace immediately if webbing is cut, torn, or permanently stretched, if the retractor locks intermittently, or after accident-related pretensioner deployment. Regular cleaning and avoiding exposure to harsh chemicals will extend service life.

Searchable by product codes 96589932XX, 8975L9 and 8975GY — enter these identifiers to quickly find the correct replacement. Suitable for professional fitters and experienced DIY mechanics who follow manufacturer procedures.

This Driver Seat Belt is a direct-fit safety component for the Peugeot 308 (T7) range. Ideal for professional garages and experienced DIY mechanics, the belt assembly is referenced under product codes 96768383XX and 8976S1 and is supplied in Black (Color Code FXX). The assembly includes the retractor and buckle interface and is designed to restore occupant restraint performance after wear, damage, or accidental deployment.

Features And Benefits

– Direct Replacement For Driver Side: Manufactured to match original mounting points and connector types for easy installation on compatible Peugeot 308 (T7) vehicles.
– Integrated Retractor And Pretensioner Interface: Works with the vehicle’s safety systems to lock webbing during a sudden stop and to support pretensioner activation if equipped.
– OEM Reference Numbers Included: Commonly Searched By Part Numbers 96768383XX And 8976S1 — useful For Fast Identification And Ordering.

Compatibility

Peugeot 308 (T7) — Driver Side. Color: Black (FXX). Cross-reference With Product Codes 96768383XX / 8976S1.

How To Replace

1. Prepare Vehicle: Park on level ground, engage parking brake and, before working near the pretensioner connector, disconnect the negative battery terminal and wait a few minutes to eliminate residual charge.
2. Remove Interior Trim: Carefully remove covers and trim panels around the B-pillar and seat base to access mounting bolts and electrical connectors.
3. Unbolt Anchors: Loosen and remove lower anchor bolts and the retractor mounting bolt(s). Keep bolts for reuse only if in good condition and per manufacturer guidance.
4. Disconnect Electrical Connector: If The Belt Assembly Has A Pretensioner Connector, Disconnect It Carefully To Avoid Damage.
5. Fit New Unit: Install New Belt Assembly Ensuring Webbing Is Not Twisted. Reconnect Electrical Connector And Refit Fasteners.
6. Torque And Check: Tighten All Fasteners To The Manufacturer’s Torque Specifications Using A Torque Wrench. Verify Smooth Retractor Operation, Proper Buckle Engagement And That The Webbing Runs Freely.
7. Reconnect Battery And Perform System Checks As Per Vehicle Procedure.

Installation Recommendations

– Always Follow Manufacturer Service Manual For Fastener Torque Values And Step-By-Step Procedures.
– Disconnect The Battery Before Handling Any Pretensioner Wiring To Prevent Accidental Deployment.
– Use A Torque Wrench For All Safety-Related Fasteners And Replace Any Damaged Bolts Or Clips.
– Ensure Electrical Connector Is Fully Seated And Wiring Is Free From Pinch Points.
– After Installation, Confirm Seat Belt Warning Lamp And Restraint System Diagnostic Status Using Suitable Diagnostic Equipment.

Why Seat Belts Fail

– Deployment In A Crash: Pretensioners Activate During A Collision; After Activation The Entire Assembly Must Be Replaced.
– Wear And Abrasion: Repeated Use, Sharp Edges Or Foreign Debris Can Fray Webbing Leading To Loss Of Strength.
– Retractor Seizure: Dirt, Corrosion Or Internal Mechanism Wear Can Cause The Retractor To Stick Or Fail To Lock Properly.
– Electrical Connector Issues: Corrosion Or Poor Connection Can Affect Pretensioner Functionality.
– Fastener Or Anchor Corrosion: Compromised Mounting Points Reduce The Effectiveness Of The Restraint System.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Peugeot 308 (T7) — Driver Side
• Product Codes: 96768383XX, 8976S1
• Additional Numbers: FXX (Color Code – Black)

High-quality replacement right rear seat belt assembly designed for Peugeot 307 CC. This complete unit includes the buckle and mounting points, making it a direct-fit solution for mechanics and DIY enthusiasts searching by part number 8974JY. Ideal when the original belt is damaged, the buckle is faulty, or after an impact when the belt locking mechanism has been triggered. Clear product code reference in the description improves findability in online searches and helps you order the correct part quickly.

Key Benefits

• Complete Assembly: Supplied with Buckle For Straightforward Replacement.
• Direct Fit For Peugeot 307 CC: Simplifies Installation And Saves Time.
• Indexed By Part Number: Commonly Searched As 8974JY, Eases Identification.
• Suitable For Professional Garages And Skilled Self-Repairers.

How The Part Functions

The seat belt assembly secures rear-seat occupants by locking the webbing under sudden deceleration and by restraining movement in the event of a collision. The buckle provides a secure latch point for the tongue, while the retractor (integral to the assembly on many vehicles) controls webbing extension and automatic locking. If equipped, a pretensioner will activate during a severe impact to remove slack from the belt.

Replacement Guide

• Preparation: Park on level ground and isolate the vehicle electrical system where required — disconnect the battery before working near any pyrotechnic pretensioner components.
• Access: Remove interior trim panels and seats as needed to expose the belt anchorage points and the buckle mounting location.
• Removal: Unbolt the lower anchorage(s) and detach the buckle from its mounting. If the unit has an electrical connector (pretensioner), carefully unplug it following safety precautions.
• Installation: Fit the new assembly in reverse order, torque bolts to manufacturer specifications and ensure the belt rewinds and locks smoothly. Reinstall trim pieces and perform a functional check of latch engagement and retraction.
• Notes: If The Vehicle Is Equipped With A Pretensioner, Follow Manufacturer Safety Procedures During Removal And Installation.

Installation Recommendations

• Always Use Correct Torque Values For Mounting Bolts To Maintain Structural Integrity.
• Inspect Mounting Points For Corrosion Or Damage And Repair If Necessary Before Fitting The New Belt.
• Verify Smooth Retraction And Proper Latching After Installation.
• If The Belt Has An Electrical Connector Or Pretensioner, Disconnect The Battery And Wait The Manufacturer-Specified Time Before Handling.

Why The Part Most Commonly Fails

• Wear And Tear: Webbing Can Fray, Stiffen Or Become Contaminated Over Time Reducing Performance.
• Buckle Faults: Internal Latch Mechanisms Can Jam Due To Dirt, Corrosion Or Mechanical Damage.
• Pretensioner Activation: After A Collision The Pretensioner May Deploy And The Entire Assembly Requires Replacement.
• Mounting Corrosion Or Damage: Structural Fixings Can Weaken, Compromising Safety.

Technical Information

• Manufacturer: Stellantis Citroën Peugeot
• Model: Peugeot 307 CC
• Product Codes: 8974JY NFP
• Additional Numbers: 8974JY

Ordering this right rear seat belt by part number (8974JY) ensures you receive the correct assembly for the passenger-side rear position of Peugeot 307 CC models. Suitable for professional fitment and experienced DIY repairs; follow all safety and manufacturer procedures when working with restraint systems.

Product Overview

High-quality left rear seat belt assembly designed for Peugeot 307 CC models. This unit arrives complete with buckle and retractor, ready to replace a worn or damaged original part. Built to restore occupant restraint function, the assembly is suitable for professional workshops and experienced DIY mechanics who carry out safe interior dismantling and reassembly.

Key Features & Benefits

• Complete Assembly: Retractor, webbing and buckle delivered as a single unit for straightforward replacement.
• Direct Fit: Designed to match mounting points and routing of the original Peugeot 307 CC left rear position (behind driver).
• Safety Function: Restores proper seat belt locking and webbing retraction for occupant protection.
• OE Reference Searchable: Frequently found by product code 8974JX—useful for fast lookup in parts catalogs.

Compatibility

Primarily intended for Peugeot 307 CC models. When searching, customers often use the product code 8974JX.

Replacement Procedure

Intended for qualified technicians or competent DIYers with basic tools. Typical replacement steps:

• Disconnect The Battery: Always disconnect the vehicle battery and wait an appropriate time before working on seat belts to avoid accidental airbag/pretensioner activation.
• Remove Interior Trim: Carefully remove the necessary trim panels to access the rear belt retractor, anchor bolts and buckle fastenings.
• Unbolt The Retractor And Anchors: Remove bolts securing the retractor and lower anchor. Keep track of bolt types and torque values.
• Disconnect Electrical Connector (If Present): If the belt assembly includes a pretensioner or sensor connector, unplug it following safety precautions.
• Fit New Unit: Position the replacement assembly, route webbing correctly, and fasten bolts to the manufacturer’s torque specifications.
• Reconnect Battery And Test: After reassembly, reconnect the battery and check belt locking, retraction, and buckle engagement. Verify there are no dashboard fault indications related to restraints.

Why This Part Fails Most Often

Rear seat belts typically stop functioning correctly for several reasons: webbing wear or fraying from prolonged use or snagging; Dirt, debris or rust causing the retractor to stick or lock; Internal mechanism failure due to age; Buckle wear or contamination preventing reliable latching; And deployment-related damage if the pretensioner operated in a collision. Regular inspection and prompt replacement of damaged belts are essential for occupant safety.

Installation Recommendations

• Follow Manufacturer Procedures: Use correct torque values for anchor bolts and follow Peugeot guidelines for trim removal to avoid damage.
• Observe Safety Precautions: Always disconnect the battery before starting work on restraint systems and wait the recommended time to discharge capacitors.
• Check Electrical Connections: If the assembly has a pretensioner or sensor, ensure connectors are clean and seated correctly.
• Test Functionality: After installation, perform a functional check of webbing retraction, locking under sudden pull, and buckle engagement.
• Use Replacement Hardware If Damaged: Replace corroded bolts, clips or trim fasteners to ensure a secure mounting.

Technical Information

• Manufacturer: Stellantis / Peugeot
• Model: Peugeot 307 CC
• Product Codes: 8974JX
• Other Numbers: NFP

Notes For Professionals

This seat belt assembly is intended as a direct-fit replacement. Technicians should verify correct routing and secure mounting during installation. Because restraint systems are critical for safety, any signs of prior deployment, damage or inconsistent operation should result in replacement of the complete assembly rather than repair of individual components.

Product Description

High-quality centre rear three-point seat belt designed for Peugeot 307 and 308 Estate (Kombi/SW) models. This part restores safety and restraint for the centre rear passenger and is supplied with the core mounting points required for direct replacement. Commonly sought under the OEM references shown below, it is an essential safety item for workshops and DIY mechanics working on Peugeot passenger cars.

Function And Benefits

The centre rear seat belt is a three-point restraint system that secures the middle rear passenger by distributing crash forces across the pelvis and shoulder. A correctly functioning belt reduces the risk of injury in an impact and keeps occupants in the correct seating position. Benefits include straightforward installation on compatible models, restored safety compliance, and peace of mind for vehicle occupants.

Fitment / Compatibility

Intended for Peugeot 307 and Peugeot 308 Estate (Kombi / SW) rear centre seating positions. Often referenced in parts searches by the product codes listed below (use these codes when searching in parts catalogs or service software).

Technical Information

• Manufacturer: Stellantis (Peugeot)
• Model: Peugeot 307, Peugeot 308 (Estate / Kombi / SW)
• Product Codes: 96589932XX, 8974QK, 8975GY
• Other Numbers: 96589932 XX (variant references seen in parts lists)

Installation Recommendations

Replacement should be performed by a competent technician or an experienced DIYer who follows manufacturer procedures. Typical replacement steps:

• Park on level ground, engage parking brake and remove ignition key.
• Disconnect the vehicle battery and wait the manufacturer-recommended time to disable SRS systems before working near pretensioners or airbag wiring.
• Remove the rear trim panels and seat back upholstery to access the belt retractor and anchor bolts.
• Unbolt the lower anchor and upper mounting points, and carefully unplug any electrical connector if the belt is fitted with a pretensioner.
• Fit the replacement belt, route the webbing correctly, hand-tighten fasteners, then torque to manufacturer specifications.
• Refit trim, reconnect the battery, and perform a visual check of operation and webbing run. If the vehicle has fault codes after installation, clear and re-scan with appropriate diagnostic equipment.

Why This Part Fails

Seat belts typically fail or require replacement for the following reasons:

• Wear and Tear: Fraying, abrasion or cuts to the webbing from long-term use or contact with sharp objects.
• Contamination And Jamming: Dirt, debris or corrosion can cause the retractor to stick or the belt to retract poorly.
• Pretensioner Deployment: Involved in collisions, pretensioners activate and permanently change the belt assembly, requiring replacement.
• Mechanical Damage: Broken anchor bolts, damaged retractors or faulty buckles after impacts or incorrect handling.

Practical Tips

Inspect seat belt webbing regularly for cuts or heavy wear and check that the retractor locks under a sharp pull. Replace immediately if webbing is damaged, if the retractor does not operate smoothly, or after any deployment of the pretensioner. Use OEM or equivalent quality parts and follow torque and safety instructions to ensure correct performance.

Purchase Information

This centre rear seat belt is listed under the common OEM references above—searching by these codes (96589932XX, 8974QK, 8975GY) will help you quickly find the correct replacement. Ideal for professional workshops and competent DIY mechanics performing safety-critical repairs on Peugeot 307 and 308 Estate models.

The original seat belt lock holder for the left front seat (driver) designed for Peugeot 308. With the accurate OE number 8975L0, you can easily verify the match with your work. It is a used original dog, suitable as a direct replacement when damaged by the original lock or a non -functional signaling of the belt.

The part ensures reliable strip snapping and at the same time uses the integrated sensor to inform the vehicle control unit of the belt. A typical manifestation of the defect of the original part is permanent beeping or message “non -defensive belt” even when the belt is on, or mechanical wear or damage to the plastic of the lock. Replacing this part usually removes these problems.

As standard, the installation takes place directly to the seat frame using the original screw. For safety reasons, always disconnect the battery (and wait a few minutes) before disconnecting the connectors under the seat to prevent the SRS errors. After assembly, check the seat of the seat on the rails and the correct cabling line; Any stored errors can be deleted by diagnostics.

Before ordering, we recommend comparing code 8975L0 with number on your original part and check the handles and shape/connector. The correct identification according to OE numbers is the safest way to trouble -free confusion and full compatibility.

technical information

• Manufacturer: PSA Peugeot Citroën
• Model: Peugeot 308 – left front (driver)
• product codes: 8975L0, 8975.L0
• Other numbers: 8975 l0 (writing variant)

Advantages of the original part: accurate landing without modifications, correct function sensor on the belt and long life. If you are dealing with a fake message of a notes, worn tongue of the lock or will in the bracket, this complete belt buckle is a quick and efficient solution.

The Driver Safety Belt for PEUGEOT 308 in black (color code FXX-) offers a reliable solution to maintain your vehicle’s original safety standards. Essential for protecting the driver during sudden stops or collisions, this safety belt ensures both security and comfort on the road.

This belt is specifically designed for PEUGEOT 308 models and serves as an effective replacement when the original belt is damaged or worn out. Suitable for both professional mechanics and vehicle owners willing to perform DIY repairs, the installation process is straightforward, but professional assistance is recommended to guarantee optimal functionality.

Technical Information

• Manufacturer: Original Peugeot
• Model: PEUGEOT 308
• Product Codes: 96568574XX, 8975K6
• Additional Numbers: 8975K6
• Color: Black – Color Code FXX-

Usage and Maintenance

The safety belt plays a critical role in driver protection and should be regularly checked for wear and tear. Factors such as frequent use, exposure to sunlight, and impact stress can compromise its integrity over time, necessitating timely replacement to maintain safety performance.

Replacing the belt involves removing the old unit from the mounting points and securing the new one firmly to the vehicle’s frame. When properly installed, it restores your PEUGEOT 308’s essential safety feature, ensuring peace of mind during driving.

Why Choose This Part?

This product balances quality and affordability, offering a high-grade safety belt that meets stringent safety standards while supporting vehicle integrity. Whether you are an experienced mechanic or a car enthusiast handling repairs at home, this driver safety belt is a practical and essential investment for the PEUGEOT 308.

For any questions or additional support in selecting the correct part, feel free to contact our team. Drive safely with confidence by choosing the right safety components for your vehicle.