This is a right-hand pyrotechnic passenger seat belt designed for Peugeot 206 and 206+. Ideal for professional auto shops and experienced DIY mechanics who replace crash‑activated restraints or worn assemblies. The unit includes a pyrotechnic pretensioner designed to lock and tighten the belt instantly during a severe impact to reduce occupant movement.

Function and Application

The seat belt assembly secures the front passenger during normal driving and, in the event of a collision, works together with the pretensioner and airbags to reduce forward movement. On impact the pyrotechnic pretensioner activates to remove slack from the webbing, improving occupant protection. This part is intended for the right front (passenger side) of Peugeot 206 and 206+ models. Color code: FXX (Black).

How To Replace

Replacement should be performed by a qualified technician or a competent DIY mechanic with basic workshop tools. Typical replacement steps:

• Disconnect the vehicle battery and wait a few minutes to ensure the system is discharged.
• Remove trim pieces and seats as required to access the belt retractor and anchor points.
• Disconnect any electrical connectors related to the pretensioner (if fitted) before unbolting.
• Unbolt the lower anchor and the retractor unit, remove the old belt assembly.
• Install the new unit, securing bolts to the manufacturer’s torque specifications and reconnect electrical connectors.
• Refit trim and seats, reconnect the battery and verify proper belt retraction and locking by performing static checks.

Installation Recommendations

Always follow vehicle manufacturer procedures. Disconnect the battery before starting work and allow time for the airbag/pretensioner system to discharge. Use the correct torque values for mounting bolts and replace any corroded fasteners. If the pretensioner electrical connector shows damage or corrosion, address it before completing installation. After replacement, check belt webbing for smooth travel, proper locking under a sharp pull, and correct anchorage alignment.

Most Common Reasons For Failure

• Deployment During A Crash: Pyrotechnic pretensioners are single‑use and must be replaced after any deployment.
• Webbing Wear Or Fraying: Prolonged abrasion, contamination or UV exposure can weaken the belt webbing.
• Retractor Locking Or Jamming: Dirt, corrosion or internal spring/failure can prevent proper retraction.
• Electrical Or Connector Issues: Corrosion or damage to the pretensioner connector can prevent correct function.
• Impact Or Mechanical Damage: Seat belt components can be bent or damaged in collisions or from improper removal/installation.

Technical Information

• Manufacturer: Stellantis (Peugeot)
• Model: Peugeot 206, Peugeot 206+
• Product Codes: 96468606XX, 8973WJ, 8973WL, 8974GV, 8974GS
• Other Numbers: 8973WJ | 8973WL | 8974GS | 8974GV | 96468606XX

Notes For Mechanics

This is a safety-critical component. Replace any belt assembly that shows signs of deployment, damage or excessive wear. After fitting, verify that the belt retracts smoothly, locks under sudden pull and that the pretensioner electrical interface is intact. Keep documentation of replacement for vehicle service records.

Overview

This left front driver’s seat belt with an integrated pyrotechnic pretensioner is a direct-fit replacement for Peugeot 206 and 206+ models. Designed to restore the original occupant restraint function after damage or pretensioner deployment, the assembly includes the retractor, webbing, buckle interface and pretensioner unit. Ideal for professional workshops and DIY mechanics who search by product code (e.g. 96361049XX, 8973SF), this part ensures correct fitment and safety when installed according to manufacturer procedures.

Function

The seat belt assembly secures the driver in the event of a crash. The pyrotechnic pretensioner activates during a collision to remove slack from the webbing almost instantly, improving occupant restraint and working together with the airbag. The retractor contains a locking mechanism that prevents further extension under sudden deceleration.

Technical Information

• Manufacturer: Stellantis (Citroën/Peugeot)
• Model: Peugeot 206, Peugeot 206+
• Product Codes: 96361049XX, 8973SF, 8973WK, 8974GT
• Additional Numbers: (3/5d|8973.SF), 8973.WK, 8973SF, 8973WK, 8974.GT
• Position: Left Front (Driver Side)
• Color: FXX – Black

Installation Recommendations

Always follow safe workshop procedures. Before starting, disconnect the vehicle battery and wait at least 10–15 minutes to allow SRS capacitors to discharge. Remove interior trim to access mounting points, unbolt the lower anchor and retractor mounting bolts (use new bolts where specified), and carefully detach electrical connector(s) for the pretensioner if present. Install the new assembly in the original orientation and torque all fasteners to manufacturer specifications. Reconnect the pretensioner connector, reassemble trim, reconnect the battery and clear any SRS fault codes with an appropriate diagnostic tool. Do not attempt to reuse or service a deployed pretensioner; it is a single-use safety device.

Why This Part Most Commonly Fails

Pyrotechnic pretensioners are typically one-time-use components that activate during a collision; after deployment the entire belt assembly must be replaced. Other common causes of seat belt failure include webbing wear or fraying from frequent use, contamination or jamming of the retractor mechanism, corrosion on mounting points or internal components, and electrical connector damage. Water ingress or prolonged exposure to harsh environments can accelerate degradation of the retractor and pretensioner circuitry.

Notes For Professionals

Because the pretensioner contains a pyrotechnic element and interfaces with the airbag system, installation and SRS diagnostics are recommended to be performed by trained technicians. After replacement, verify proper operation of the retractor, buckle latch and SRS indicator. Replace any mounting hardware that is damaged or shows corrosion to ensure secure attachment.

Product Overview

Right front pyrotechnic seatbelt (seat belt with pretensioner) designed for Peugeot 206 and 206+ models. Built to restore original safety functionality after deployment or mechanical failure, this unit includes the retractor and pretensioner assembly mounted on the B‑pillar and the lower anchorage components. Finished in Black (FXX) to match standard interior trims on listed models.

Key Benefits

• Direct fit for Peugeot 206 / 206+ — commonly located and referenced by product codes for fast search and ordering.
• Restores occupant restraint and pretensioner functionality after deployment or malfunction.
• Durable webbing and robust retractor mechanism designed for long service life under normal conditions.

Compatibility

Suitable for Right Front (Passenger Side) of Peugeot 206 and Peugeot 206+. Verify fit by matching product codes listed below with vehicle spare parts documentation.

How It Works

The seatbelt assembly combines a retractable belt with a pyrotechnic pretensioner. In the event of a crash, the pretensioner rapidly removes slack from the webbing to better position the occupant before airbag deployment. The retractor ensures controlled locking and release during normal use and locking under sudden deceleration.

Replacement Procedure (Overview)

• Disconnect Battery: Always disconnect the vehicle battery and wait the manufacturer‑recommended time to ensure pyrotechnic and airbag circuits are discharged.
• Remove Interior Trim: Carefully remove the B‑pillar trim and any necessary panels to access the upper and lower belt anchor points.
• Unbolt Assembly: Unscrew the belt lower anchorage and the retractor mounting bolts. If present, disconnect the electrical connector for the pretensioner.
• Install New Unit: Fit the replacement assembly, route the webbing correctly, and tighten all fasteners to the Manufacturer’s torque specifications.
• Diagnostics: After installation, perform a system check with appropriate diagnostic equipment to clear fault codes and verify pretensioner circuit integrity.

Installation Recommendation

Installation of pyrotechnic seatbelts should be performed by a qualified technician. Take special care when handling the pretensioner: always disconnect the battery before work and follow the vehicle manufacturer’s procedures. Use correct torque values for anchor bolts and professional diagnostic tools to confirm system readiness. If unsure, refer to official service manuals for step‑by‑step guidance.

Most Common Failure Causes

• Deployment in a Collision: The pretensioner and often the retractor must be replaced after any deployment event.
• Electrical Faults: Corroded or damaged wiring/connectors can prevent pretensioner activation or generate airbag/seatbelt faults.
• Mechanical Wear: Webbing abrasion, fraying, or retractor jamming from debris can reduce effectiveness.
• Corrosion: Moisture ingress and rust at anchor points or internal components can impair operation.

Technical Information

• Manufacturer: Stellantis
• Model: Peugeot 206, Peugeot 206+
• Product Codes: 96361048XX, 8973SG, 8973WL, 8973WJ, 8974GV
• Other Numbers: 8973.SG, 8973.WJ, 8973.WL, 8973SG, 8973WJ, 8973WL, 8974GV, 96361048XX

Notes For Mechanics And DIYers

This part is intended for right front passenger position. When replacing a pyrotechnic seatbelt, always observe safety precautions for restraint systems. After installation, clear and verify airbag/seatbelt system status with an appropriate diagnostic tool. Do not reuse pretensioner‑activated assemblies; replace with a complete, serviceable unit.

High-quality Left Front Driver’s Seat Safety Belt with pyrotechnic pretensioner designed for Peugeot 206 and 206+. This replacement belt restores occupant restraint performance after wear or mechanical failure and is suitable for professional workshops and skilled DIY mechanics. The assembly features the original-style retractor and pretensioner interface to match factory fitment and mounting points. Commonly searched by part numbers, this unit helps you quickly locate the correct spare for timely repairs.

Features And Function

The seat belt assembly combines a webbing strap, automatic retractor with locking mechanism and a pyrotechnic pretensioner. Under severe deceleration or impact, the locking mechanism prevents webbing payout while the pretensioner tightens the belt to reduce occupant movement. The webbing (Color FXX – Black) is abrasion-resistant and UV-stabilized for typical automotive use. The retractor contains an inertia locking device that engages during sudden stops or collisions.

Technical Information

• Manufacturer: Stellantis (Citroën/Peugeot)
• Model: Peugeot 206, Peugeot 206+
• Product Codes: 96468609XX, 8973SF, 8973WK, 8974GT
• Other Numbers: 206+96468609XX, 8973SF, 8973WK, 8974GT, 96468609XX
• Color: FXX – Black
• Position: Left Front (Driver Side)
• Type: Pyrotechnic Pretensioner Seat Belt

Installation Recommendations

Before starting work, always disconnect the vehicle battery and follow the manufacturer’s safety procedures. Typical replacement steps:

1. Disconnect negative battery terminal and wait per vehicle safety guidelines to avoid accidental pretensioner activation.
2. Remove interior trim panels to access upper mounting point and retractor area.
3. Unbolt lower anchor and retractor mounting bolts. Carefully disconnect the pretensioner electrical connector (if present).
4. Install the new belt assembly, route the webbing exactly as the original, and hand-start bolts before torquing to manufacturer specifications.
5. Reconnect pretensioner connector and reattach trim. Reconnect battery and verify seat belt operation: smooth extension/retraction and correct locking under sharp pulls.

If The Assembly Contains A Pyrotechnic Pretensioner, Handle With Care: Do Not Attempt To Service Or Re-Arm The Pretensioner Yourself. Disposal And Replacement Of Pyrotechnic Components Should Follow Local Regulations And Workshop Safety Rules. If Uncertain, Have The Replacement Performed By A Qualified Technician.

Why The Part Usually Fails

• Wear And Damage To Webbing: Fraying, cuts or heavy contamination can compromise strength and require replacement.
• Retraction Or Locking Faults: Inertia mechanism or retractor spring wear can cause the belt to stick, not retract, or fail to lock properly.
• Pretensioner Activation: In A Collision The Pyrotechnic Pretensioner Fires Once And The Entire Assembly Must Be Replaced.
• Connector Corrosion Or Wiring Damage: Electrical faults can render pretensioner and associated warning systems inoperative.

Practical Notes For Workshops And DIYers

This seat belt is commonly searched using the product codes listed above—include those codes when sourcing parts. Replacement is straightforward for an experienced mechanic but requires respect for safety procedures due to the pyrotechnic pretensioner. After installation, always perform a functional check of belt retraction, locking behavior and, where applicable, SRS/airbag related warning lights to ensure no related fault codes were triggered.

Recommendation

Replace The Seat Belt If The Webbing Shows Visible Damage, If The Retractor Fails To Operate Smoothly, Or After Any Accident Where The Pretensioner May Have Activated. Use Original-Style Parts With Matching Mounting Points And Electrical Connectors To Ensure Correct Fit And Function.

High-quality Right Front Pyrotechnic Seat Belt designed for Peugeot 206 and 206+ vehicles. This OE-fit replacement includes a pyrotechnic pretensioner for rapid belt tensioning in the event of a collision and a locking retractor that secures the occupant. Ideal for professional workshops and experienced DIYers who search by part number: 96468608XX, 8973WL, 8973WJ, 8974GV, 8974GS. Constructed to match original mounting points and connectors for straightforward swap-in installation and reliable safety performance.

Key Features

• Position: Right Front (Passenger) Seat Belt with Pyrotechnic Pretensioner.
• Color: FXX – Black, matching Peugeot 206 interior trims.
• Direct Replacement: Designed to fit original fastening points and connector types used on Peugeot 206 / 206+ models.
• Often Searched By Part Number: 96468608XX, 8973WL, 8973WJ, 8974GV, 8974GS.

Technical Information

• Manufacturer: Stellantis / Peugeot
• Model: Peugeot 206, Peugeot 206+
• Product Codes: 96468608XX, 8973WL, 8973WJ, 8974GV, 8974GS
• Additional Numbers: 8973WJ | 8973WL | 8974GS | 8974GV | 96468608XX
• Position: Right Front (Passenger)
• Color: FXX – Black
• Type: Pyrotechnic Pretensioner Seat Belt with Locking Retractor

Fitment And Replacement Overview

This seat belt is intended as a direct-fit replacement for the right front passenger side of Peugeot 206 and 206+ models that use the listed part numbers. It is suitable for professional repair shops and competent DIY mechanics familiar with vehicle safety systems.

Typical replacement procedure:

• Ensure Vehicle Is Safe: Before beginning, disconnect the vehicle battery to avoid accidental activation of pyrotechnic components and follow the vehicle manufacturer’s recommended safety waiting period.
• Remove Trim Panels: Carefully remove the interior trim to access the belt retractor, anchor points and buckle.
• Unbolt And Disconnect: Unbolt the retractor and lower anchor bolts, unplug the electrical connector for the pretensioner (if present) and remove the old belt assembly.
• Install New Unit: Position the new seat belt assembly, reconnect the electrical connector, fit anchors and hand-start bolts, then torque all fasteners to the manufacturer’s specified values.
• Refit Trim And Test: Refit trim panels, reconnect the battery, and verify that the belt retracts and locks correctly. If any fault indicators appear related to the restraint system, perform a diagnostic scan with appropriate PSA-compatible equipment.

Installation Recommendations

• Always Disconnect The Battery: Disconnect the negative battery terminal before working on pretensioners or any pyrotechnic restraint components and observe the manufacturer’s recommended wait time to discharge capacitors.
• Observe Correct Torque And Fastening Order: Use the vehicle manufacturer’s torque settings for seat belt bolts—do not reuse damaged bolts or anchorage hardware.
• Do Not Attempt To Service The Pretensioner: The pyrotechnic pretensioner is a single-use safety device; do not attempt to disassemble or repair it. If the pretensioner has been activated in a collision, replace the entire assembly.
• Use Diagnostic Tools If Required: After installation, clear any restraint system fault codes with suitable diagnostic equipment and confirm proper system status.
• Recommended For Professionals: Because this is a safety-critical component, installation by a qualified technician is recommended when in doubt.

Why This Part Fails

Common causes of seat belt failure include normal wear and tear (frayed or weakened webbing), contamination with dirt or chemicals, corrosion of anchor points, retractor mechanism jamming, or activation of the pyrotechnic pretensioner during a collision. Electrical faults or connector corrosion can also render the pretensioner inoperative. After a deployment event, the pretensioner and related components must be replaced.

Notes For Buyers

Searches for this part are frequently performed using the product codes listed above—include these numbers in your search to find compatible units quickly. Fitment is intended for Peugeot 206 and 206+ models; verify visual match with the original unit before installation.

Safety Reminder

Seat belts and pretensioners are critical safety devices. Improper installation can compromise occupant protection. If you are not fully confident in performing the replacement, have the work performed or checked by a qualified auto technician.

Product Overview

High-quality right rear passenger seat belt suitable for Peugeot 206 and Peugeot 206+. Supplied in Color FXX (Black). This replacement belt is commonly searched and identified by OEM product codes, making it easy for mechanics and DIY enthusiasts to find the correct part quickly. Ideal for restoring occupant safety after wear, damage or pretensioner deployment.

Technical Information

• Manufacturer: Stellantis Citroen Peugeot
• Model: Peugeot 206, Peugeot 206+
• Product Codes: 96544968XX, 8975QZ, 8975R0
• Other Numbers: 8975.QZ, 8975.R0, 8975QZ, 8975R0, 96544968XX, T50/M10

Function And Features

The seat belt assembly secures the rear right passenger during a collision or sudden deceleration. If equipped with a pyrotechnic pretensioner (pyro), the device tightens the belt instantly at the moment of impact to reduce occupant movement. The assembly includes webbing, retractor with inertia locking mechanism, anchor points and pretensioner when applicable.

How The Part Is Replaced

• Park vehicle on level ground and disconnect the negative battery terminal. Wait at least 10 minutes to discharge residual power in the restraint system before starting work.
• Remove interior trim panels to access the retractor and anchor bolts. Keep trim clips safe for reuse.
• Unbolt the lower anchor and retractor. Common fastener types indicated by tags: Torx T50 head and M10 thread anchors.
• Disconnect any electrical connector for a pretensioner (if fitted) before removal. Handle pretensioner wiring with care—do not expose to sparks or open flame.
• Install new belt assembly ensuring correct routing of webbing and that the retractor is mounted in the original orientation. Reuse or replace fasteners as required and tighten to manufacturer torque specifications.
• Reassemble trim panels and reconnect the battery. Perform a function check: belt extends and retracts smoothly and the locking mechanism engages under a sharp pull.

Installation Recommendations

• Always disconnect the battery and wait before starting work to avoid accidental pretensioner deployment or airbag faults.
• Observe correct routing and orientation of the webbing to ensure proper function of the retractor and locking mechanism.
• Replace any damaged trim clips or corroded fasteners; use correct replacement bolts (Torx/M10 where applicable).
• If the pretensioner has deployed in an accident, replace the entire seat belt assembly—pretensioners are single-use devices and cannot be reset.
• After installation, confirm that the belt retracts freely, locks under sharp pull and that there are no twists in the webbing.

Most Common Reasons For Failure

• Wear and Abrasion: Webbing frays or weakens over time from repeated use, sharp edges or contamination.
• Retractor Fault: Inertia locking mechanism can seize or lose tension due to dirt, corrosion or mechanical failure.
• Pretensioner Deployment: Pyrotechnic pretensioners activate in a collision and must be replaced afterward.
• Corroded Or Damaged Fasteners: Anchor bolts exposed to moisture can corrode, reducing attachment integrity.
• Accidental Damage: Cuts, burns or chemical contamination compromise webbing strength and require replacement.

Additional Notes

This part is often searched by its product numbers (96544968XX, 8975QZ, 8975R0). Suitable for professional workshops and competent DIY mechanics familiar with vehicle restraint systems. If the vehicle is equipped with a pretensioner, treat components with appropriate caution and follow manufacturer procedures for safe replacement.

Overview

This left rear pyrotechnic seat belt is a direct-fit safety component for Peugeot 206 and 206+ models. Designed for mechanics and experienced DIYers, the assembly includes a pretensioner intended to remove slack in severe impacts and keep occupants secured. It fits original mounting points and carries the OE-style reference numbers commonly used when searching parts catalogues.

Key Features

• Left Rear (Passenger Side) Seat Belt Assembly
• Pyrotechnic Pretensioner (activates in significant collisions to reduce slack)
• Color: FXX – Black
• Direct fit for Peugeot 206 and Peugeot 206+
• Ideal for replacement after deployment or visible damage

Technical Information

• Manufacturer: Stellantis / Peugeot
• Model: Peugeot 206, Peugeot 206+
• Product Codes: 96544969XX
• Additional Numbers: 8975QY, 8975R2, 8975.QY, 8975.R2

Compatibility And Fitment

Fits Peugeot 206 and 206+ models that use left rear pyrotechnic seat belt assemblies with the above product codes. Always verify the mounting style and connector shape against the original part before installation.

How The Part Works

The seat belt restrains rear-seat occupants during normal driving and locks under sudden deceleration. The integrated pyrotechnic pretensioner is designed to activate in a severe impact, removing slack from the belt webbing to position the occupant correctly before load-limiting occurs.

Replacement Procedure (Summary)

• Disconnect the vehicle battery and wait at least 10 minutes to allow SRS capacitors to discharge.
• Remove interior trim panels to expose belt mounting points and electrical connector for the pretensioner.
• Unbolt the lower anchor, retractor, and buckle mounting bolts (retain hardware if required by workshop practice).
• Disconnect the electrical connector from the pretensioner module carefully.
• Fit the new assembly in reverse order, ensuring the retractor and buckle are correctly aligned and bolts are tightened to the manufacturer’s torque specification.
• Reconnect the battery and use a diagnostic tool to check SRS system status and clear any fault codes where applicable.

Installation Recommendations

• Always follow the vehicle manufacturer’s service manual and torque specifications.
• Disconnect the battery before starting work and wait to ensure the SRS system is de-energized.
• Inspect mounting points and wiring for corrosion or damage; replace any compromised fasteners or connectors.
• After fitting, verify correct operation of seat belt buckles and check that the SRS warning light behaves normally. Use appropriate diagnostic equipment if necessary.

Common Failure Causes

• Deployment During A Collision – Pyrotechnic pretensioners must be replaced after activation.
• Webbing Wear Or Contamination – Cuts, fraying, or heavy soiling reduce effectiveness and require replacement.
• Retractor Failure – Mechanical jamming or internal corrosion can prevent correct extension/retraction.
• Electrical Connector Corrosion Or Damage – Can prevent pretensioner signaling or cause SRS faults.
• Age And Environmental Degradation – Prolonged exposure to moisture or chemicals accelerates wear.

Why Choose This Part

This assembly provides a straightforward replacement for left rear seat belt failures or post-collision renewals on Peugeot 206 and 206+ vehicles. With OE-style reference numbers and correct fitment for the intended models, it helps restore rear-seat occupant protection to the vehicle’s original specification.

Note

Replace any pyrotechnic-equipped seat belt after deployment or if there is any visible damage. Professional installation is recommended for those without experience in SRS-related repairs.

Are you looking for reliable and quality auto parts for your Peugeot 206 CC? This right front safety belt for the passenger is the perfect solution for ensuring safety and comfort in your vehicle. This product ensures the original quality and functionality you expect from your car’s original equipment.

The safety belt is a crucial component of the vehicle that protects passengers in the event of an accident by preventing sudden movement. This specific model is specially designed for Peugeot 206 CC, excelling in high durability and long-lasting performance. With its intense black color, it beautifully complements your car’s interior and adds to its aesthetic value.

Technical Information:
Manufacturer: PSA CITROEN PEUGEOT
Model: Peugeot 206 CC
Product Codes: 96483379XX
Other Numbers: 8974HE NFP

Installing this safety belt is a standard process that can be handled by both professional mechanics and experienced DIY enthusiasts with the right tools. With proper installation and maintenance, you can expect it to provide faithful service for a long time. Its replacement is recommended in case of visible wear or damage caused by long-term use or a serious car accident.

Be ready to feel safe and comfortable in your Peugeot 206 CC with this quality and proven safety belt. Don’t wait until it’s too late; give your vehicle the true care and protection it deserves.

Are you looking for a reliable and safe pyrotechnic seatbelt for your Peugeot 206 CC? Our Left Front Driver’s Safety Belt is the optimal choice for those who demand both quality and safety. This part is ideal for replacing an original worn or damaged safety belt, ensuring not only safety but also the original aesthetics of your vehicle’s interior.

Seatbelts are a crucial component of all automobiles, providing protection during accidents by minimizing the movement of occupants within the vehicle, thereby reducing the risk of injury. They significantly contribute to overall driving safety, making it important to keep this element in perfect condition.

Technical Information:

• Manufacturer: PSA for Citroen Peugeot
• Model: Peugeot 206 CC
• Product Codes: 96483380XX
• Additional Numbers: 8974HF NFP
• Color: Black (FXX)

This original part has been carefully dismantled from a vehicle and is ready for installation. It is ideal for anyone looking to maintain their Peugeot 206 CC in excellent technical and visual condition. The installation is straightforward and does not require special modifications, making the replacement easy and saving you valuable time and money.

Shop with confidence and ensure your vehicle is equipped with quality and safe equipment. This safety belt is a great choice for anyone searching for a quality replacement part for their Peugeot 206 CC.

It is compatible with Peugeot 207 models featuring three doors. This part is essential for maintaining the safety standards of your vehicle. Over time, seat belts can wear out due to everyday use, UV exposure, and material fatigue, compromising their effectiveness. Regular inspection and timely replacement are crucial.

Functionality: The safety belt works by securely holding passengers in their seats during sudden stops or accidents, preventing serious injuries.

Technical Information

• Manufacturer: Peugeot
• Model: 207
• Product Codes: 96863715XX, 8975JW
• Additional Numbers: N/A