Product Overview

High-quality interior rearview mirror designed for Citroën Xsara Picasso (from 2004) and Peugeot 307. This replacement mirror restores clear rear visibility and original fitment, making it a practical choice for professional workshops and DIY mechanics. Commonly searched under product codes 8148KK and 8153LH, it is suitable for vehicles that use the same mirror mounting bracket and connector configuration.

Function and Features

The interior rearview mirror provides the driver with an unobstructed view of the road behind, improves situational awareness and supports safe lane changes and reversing maneuvers. Depending on vehicle specification, the mirror may be a simple manual day/night type or incorporate electrical features (e.g., heating or auto-dimming). When replacing, verify whether the original unit included electrical connectors and ensure the replacement matches those functions.

Technical Information

• Manufacturer: Stellantis / Citroën / Peugeot
• Model: Citroën Xsara Picasso (from 2004), Peugeot 307
• Product Codes: 8148KK, 8153LH
• Additional Numbers: 8153HL

Replacement Guide

Typical replacement steps (general guidance):

• Inspect the mirror mounting bracket on the windscreen and any electrical connector behind the mirror.
• If the mirror is secured with a set screw, loosen the screw and slide the mirror unit off the mounting button or bracket. If clipped, gently release the retaining clips using a suitable trim tool.
• Disconnect any electrical connector if fitted. Carefully transfer any rubber gaskets or covers from the old unit if required.
• Fit the new mirror by sliding it onto the bracket or aligning the clips, then secure the set screw or clip. Reconnect electrical connectors and check functionality (heating, auto-dim) if applicable.
• Adjust mirror position for correct rearward view and ensure firm attachment. Replace any damaged mounting pads or adhesive plates on the windscreen before refitting if necessary.

Installation Recommendations

• Work on a stationary vehicle in a safe, dry environment with adequate lighting.
• Use appropriate trim tools to avoid scratching the headliner or mirror housing.
• For electrically equipped mirrors, verify connector type and secure wiring to prevent rattles or pinched cables.
• If the windscreen mounting button is damaged or the adhesive pad shows wear, replace the mounting plate or use a certified adhesive kit to ensure safe reattachment.
• After installation, confirm all mirror functions operate correctly and that the mirror is firmly fixed.

Most Common Failure Reasons

• Impact Damage: Hitting the mirror or sudden jolts can crack the glass or break the mounting bracket.
• Bracket Wear Or Corrosion: The mounting button or bracket can become loose over time, causing vibration or detachment.
• Electrical Faults (If Equipped): Wiring connector issues or internal component failure can disable heating or auto-dimming functions.
• Adhesive Failure: If the mirror is mounted on a glued windscreen plate, deteriorated adhesive can cause the bracket to separate from the glass.

Why Choose This Mirror

This mirror offers direct fitment for compatible Citroën Xsara Picasso and Peugeot 307 models and is often referenced by the familiar product codes 8148KK and 8153LH, making it easy to find for mechanics and DIY enthusiasts. It restores visibility and driver confidence while maintaining original mounting geometry for straightforward replacement.

High-quality interior rear-view mirror compatible with selected Citroën and Peugeot models. Ideal for professional workshops and DIY mechanics who need a reliable replacement mirror identified by common part numbers 8149G1 / 8149CL. The mirror restores clear rear visibility, maintains cabin aesthetics and, depending on version, can include electrical features such as day/night switch or integrated sensors. Searching by product code (8149G1, 8149CL) often speeds up finding the correct unit.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Citroën Xsara, Citroën Xsara Picasso, Citroën C8, Peugeot 807
• Product Codes: 8149G1, 8149CL, 8149.CL, 8149.g1
• Additional Numbers: NFP (as listed)

Function

The interior rear-view mirror provides the driver with a clear view of the road behind the vehicle. Depending on the specific variant, the mirror may be a simple manual day/night unit or include electrical connections for automatic dimming, compass or integrated sensors. Proper mirror alignment is essential for safe driving and reversing maneuvers.

Compatibility And Part Number Notes

This mirror is commonly referenced by the codes 8149G1 and 8149CL. When searching for replacements, mechanics and DIY enthusiasts often use these part numbers to locate compatible units for Citroën Xsara, Xsara Picasso, C8 and Peugeot 807. Verify the mirror shape, mounting type (clip-on or bracket) and presence of electrical connectors to ensure correct fitment.

Installation Recommendations

• Prepare Tools: Trim tools, Torx/Screwdriver set, gloves and, if necessary, a small pry tool for the glass or cover removal.
• Remove Interior Trim: Gently remove any plastic covers or roof-lining trim that conceal the mirror mounting.
• Disconnect Electrical Connector: If the mirror has electrical functions, disconnect the wiring connector before removing the unit. For safety, isolate the battery when working on electrical components.
• Release Mirror From Mount: Most mirrors slide off a bracket or are held by a clamp screw. Loosen the retaining screw or press the clip to release the mirror from the windscreen mount.
• Install New Mirror: Slide the replacement onto the mounting bracket until it locks, reconnect electrical connectors and refit trim. Check operation of any electrical features and adjust mirror position.
• Professional Help: If the mirror includes electrical features or an integrated sensor, professional installation is recommended to ensure correct connection and calibration.

Most Common Reasons For Failure

• Mechanical Damage: Impact, door strikes or vandalism causing cracked glass or broken mounting brackets.
• Mounting Fatigue: Repeated vibration and stress can wear the mount or clips, causing the mirror to loosen or detach.
• Electrical Faults: Corroded connectors, broken wiring or failed internal components can disable auto-dimming or integrated sensors.
• Wear And Aging: Plastic clips and trim components become brittle over time and may fracture during use or removal.
• Poor Adhesion Or Improper Installation: Incorrect or damaged windscreen mounting plates or adhesives can lead to loosening.

Suitable for workshops and independent mechanics searching by part number. The unit is sold as a used part; inspect the item for mounting integrity and functionality of any electrical features before final installation.

Product Overview

This interior rearview mirror is a direct-fit used replacement suitable for a range of Citroën and Peugeot models. It provides a reliable line-of-sight correction for rear visibility and retains the original mounting interface for a straightforward swap. The part is commonly searched by its product codes and is aimed at professional technicians and experienced DIY enthusiasts performing interior trim or glass-area repairs.

Key Features

• Direct replacement for original mirror assembly—keeps vehicle interior appearance consistent.
• Preserves original mounting interface for quick installation.
• Used part with typical cosmetic signs of service life but fully functional mechanical components.
• Compatible with manual and electrically equipped mirrors depending on vehicle specification.

Compatibility

Typical fitment includes the following models (check physical bracket type for exact match): Citroën Xsara, Citroën Xsara Picasso, Citroën C8, Peugeot 807. The mirror is often referenced by part codes 8149CL and 8149G1.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Citroën Xsara; Citroën Xsara Picasso; Citroën C8; Peugeot 807
• Product Codes: 8149CL
• Additional Numbers: 8149G1, NFP

How The Part Works

The interior rearview mirror provides the driver with a central rearward field of view. Depending on vehicle specification, the assembly may include mechanical adjusters, electrical connectors for auto-dimming or integrated sensors, and a mounting foot that bonds or screws to the windshield or roof lining bracket.

Common Failure Modes

• Impact Damage: Most failures are due to knocks or accidents that crack the glass or snap the mounting foot.
• Mount/Adhesive Failure: Heat and vibration can weaken the adhesive or bracket attachment, causing the mirror to sag or detach.
• Electrical Faults: For mirrors with auto-dimming or integrated sensors, connector corrosion or wiring damage can cause loss of function.
• Wear Of Adjustment Mechanism: Repeated use can loosen internal pivot points, leading to poor retention of adjustment angle.

Replacement Interval And Service Life

There is no fixed replacement interval for interior mirrors—service life is typically several years to the vehicle’s lifetime if not impacted by external forces. Replace when structural damage, adhesive failure, or electrical malfunction impairs visibility or function.

Installation And Recommendations

Recommended For: Professional technicians and competent DIYers comfortable with interior trim removal.

• Preparation: Park on a level surface and switch off ignition. If the mirror includes electrical connections (auto-dimming, sensors), disconnect the battery before unplugging connectors to prevent short circuits and accidental faults.
• Removal: Carefully remove any trim covers or headliner clips hiding the mirror base. Release the mirror from its bracket—many fixtures use a spring clip or screw. Support the mirror during release to avoid dropping and damaging glass.
• Installation: Fit the mirror to the original bracket or windscreen mount. Ensure the mounting surface and adhesive area are clean and dry if adhesive is used. Reconnect electrical plugs and test functions (adjustment, dimming) before reassembling trim.
• Final Check: Confirm secure fixation and full range of adjustment. Road-test at low speed to ensure no vibration or looseness.

Why Choose This Part

This used interior mirror is a cost-effective option for restoring rear visibility with an original-style component. It is especially useful when matching interior appearance or when the original mounting bracket must be retained. Ideal for workshop repairs on compatible Citroën and Peugeot models.

Fitment Notes

• Always Compare Mounting Foot And Connector Type: Even within the same model family, mirror mounts and connectors can vary by production year and trim level—verify the physical shape and connector count when replacing.
• Part Numbers Are Common Search Terms: 8149CL and 8149G1 are frequently used when sourcing this mirror.

Reason For Most Common Fault

The single most common reason this part is replaced is mechanical damage to the glass or mounting foot caused by impacts (accidents, door hits, or heavy loads during maintenance). Secondary causes include adhesive failure on windscreen-mounted mirrors and electrical connector corrosion on equipped units.

Key features and benefits:

• Direct fit for Peugeot 607 when matched by part number 8148KL.
• Black Cornelie (FXT) finish for factory-correct appearance.
• Simple installation procedure reduces workshop time.

Function and compatibility: The interior mirror provides reliable rear visibility and standard day/night adjustment. Some vehicle variants may include electrical functions (auto-dim, compass or sensors); if present, disconnect the electrical connector before removal and reconnect after installation. Always confirm compatibility by checking the part number 8148KL against your vehicle.

Replacement and installation guidance:

1. Remove any trim panels around the mirror base.
2. If the mirror is mounted on a windshield button, slide or unscrew the mirror assembly from the mounting button.
3. Disconnect electrical connectors where fitted and retain any fasteners.
4. Clean the mounting area and fit the new mirror, securing it to the mounting button or bracket.
5. Reassemble trims and verify mirror alignment and any electrical functions.

Why mirrors fail and expected service life: Mirrors typically fail due to impact damage, cracked glass, adhesive or mounting failure, worn pivot joints or electrical faults on electronically equipped units. Service life varies with use and environmental exposure; inspect mounting and glass condition during routine maintenance.

Technical Information

• Manufacturer: PSA Citroën Peugeot
• Model: Peugeot 607
• Product Codes: 8148KL
• Other Numbers: NFP

Ordering note: Use the part number 8148KL when searching or ordering to ensure correct fit. Contact us if you need assistance confirming compatibility for your Peugeot 607.