Replacement right‑hand exterior mirror assembly designed for Citroën C3 models. This electrically adjustable, non‑heated passenger side mirror includes an ambient temperature sensor and a 5‑pin connector. It is an ideal spare part for workshops and DIY mechanics searching by part number (8149RW) who need a direct‑fit unit to restore mirror adjustment functions after damage or failure.

Key Features

– Electrically adjustable mirror motor for remote tilt and angle setting.
– Non‑heated glass (no heating element) but fitted with an ambient temperature sensor.
– 5‑pin electrical connector for direct replacement on compatible door harnesses.
– Designed for the passenger (right) door; OEM fitment for Citroën C3 applications with matching connector.

Technical Information

• Manufacturer: Stellantis (Citroën/Peugeot)
• Model(s): Citroën C3 (Passenger Side – vehicles equipped with 5‑pin mirror connector)
• Product Codes: 8149RW
• Other Numbers: Connector: 5‑Pin; Function: Electrically Adjustable, Non‑Heated, Ambient Temperature Sensor

Installation Recommendations

Before starting work always disconnect the vehicle battery and follow the vehicle manufacturer’s safety procedures. Typical replacement steps:

• Remove the interior door trim or the small mirror access panel to reach the mirror mounting bolts.
• Unscrew the mirror retaining bolts and carefully support the mirror to avoid dropping it.
• Disconnect the 5‑pin electrical connector from the mirror harness.
• Transfer any original trim plates or covers (if required) and fit the new mirror assembly to the door, tightening bolts to the manufacturer’s torque specifications.
• Reconnect the connector and the battery, then verify mirror adjustment functions and temperature sensor readout (if available in instrument cluster).

Use soft trim tools to avoid damaging door panels. If the original mirror has additional features (folding motor, memory) verify compatibility before installation. For safe handling, place the mirror on a soft surface to prevent scratching the glass.

Why The Part Commonly Fails

Exterior mirrors most often fail due to:

• Impact Damage: Collisions, parking impacts or folding into obstacles are the most frequent causes of broken housings, cracked glass or damaged adjustment motors.
• Water Ingress And Corrosion: Seals or connector corrosion can cause erratic adjustment or electrical failures, particularly in older cars or after repeated exposure to moisture.
• Motor Or Gear Wear: Repeated use over many years can wear the small adjustment motors and gears, leading to sluggish or non‑functional adjustment.
• Electrical Connector Issues: Bent pins or damaged wiring in the 5‑pin connector can interrupt power or signal to the mirror and sensor.

Practical Tips For Workshops And DIY Mechanics

• Search By Part Number: Many technicians and customers look up mirrors using the code 8149RW — including this reference in your order speeds identification.
• Test Before Final Assembly: After connecting the new mirror and before reassembling the door trim, test all adjustment directions and check the ambient temperature reading where applicable.
• Preserve Original Fasteners: If the original mounting hardware is undamaged, reuse it for correct fit and alignment; replace any stripped screws or cracked clips.

Compatibility And Fitment Notes

This mirror is intended for Citroën C3 passenger side doors that accept a 5‑pin electrically adjustable, non‑heated unit with an integrated temperature sensor. Fitment depends on the vehicle equipment level and connector type — confirm visual match of the connector and mounting points before installation.

This replacement right (passenger-side) mirror is designed for Citroën C3 vehicles and combines electrically adjustable positioning with an integrated heating element and a temperature sensor. Ideal for professional workshops and DIY mechanics, the unit restores mirror adjustment, defogging and temperature sensing functions after damage or failure. The part is commonly searched by part number 8149RW and is compatible with Stellantis Citroën/Peugeot equipment standards.

Technical Information

• Manufacturer: Stellantis / Citroën
• Model: Citroën C3
• Product Codes: 8149RW
• Other Numbers: Refer To Vehicle Parts Label Or Service Documentation

Key Functions And Benefits

Electric Adjustment: Allows precise remote positioning of the mirror glass to improve driver visibility without manual intervention.
Heated Mirror: Integrated heating element clears condensation and light ice quickly, improving safety in cold or wet conditions.
Temperature Sensor: Built-in sensor provides ambient temperature feedback for vehicle systems that use exterior temperature data.

Installation Recommendations

• Safety First: Disconnect the negative battery terminal before starting to avoid short circuits and accidental airbag deployment where applicable.
• Interior Trim Removal: Carefully remove the door trim or triangular trim cover to access the mirror mounting screws and electrical connector. Use appropriate trim tools to avoid damage.
• Unplug Connector: Detach the 7-pin (5+2) electrical connector. Inspect pins for corrosion or damage and clean if necessary.
• Remove Mounting Fasteners: Support the mirror while removing the retaining bolts or nuts to prevent the mirror from falling and damaging the door paint.
• Fit New Mirror: Align the new mirror, tighten fasteners to the manufacturer torque specification, reconnect the electrical connector, and reassemble trim panels.
• Function Check: Reconnect the battery and verify electric adjustment, heating operation, and temperature sensor response. Adjust mirror position and confirm secure fit and sealing against the door to prevent water ingress.

Why This Part Commonly Fails

• Impact Damage: Collisions or knocks from other vehicles, posts or garage doors are the most frequent cause of mirror breakage.
• Water Ingress And Corrosion: Moisture entering the connector or actuator area can corrode contacts or compromise the motor and heating element over time.
• Wear Of Internal Actuator: Repeated use can eventually wear out the adjustment motor or gears, leading to sluggish or lost movement.
• Electrical Faults: Damaged wiring, connector pin damage, or blown fuses can disable the electric adjustment or heating function.

Selecting a direct-fit replacement with the correct part code (8149RW) reduces installation time and ensures compatibility with vehicle electronics. For best results, check connectors and mounting points during installation and test all mirror functions before returning the vehicle to service.

High-quality interior rearview mirror designed for direct replacement on Citroën and Peugeot vehicles. This mirror, commonly searched under part number 8149NA, restores clear rear visibility and maintains the original interior appearance. It is suitable for professional workshops and skilled DIY enthusiasts who perform routine interior replacements. The mirror comes in color code FBJ – LAMA to match original upholstery and trim finishes.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Citroën C2, Citroën C3, Citroën C4, Peugeot 307, Peugeot 1007
• Product Codes: 8149NA
• Additional Numbers: Color Code FBJ – LAMA

Function And Description

The interior rearview mirror provides the driver with a clear central view of the traffic behind the vehicle. Depending on vehicle equipment, the mirror may be a simple manual unit or include integrated features such as auto-dimming, ambient lighting, or housing for sensors. This listed unit is supplied to match original mounting points and interior color.

Replacement Procedure

• Prepare The Vehicle: Park on a level surface and engage the parking brake. If The Mirror Has Electrical Connections (e.g., Auto-Dim Or Lighting), Disconnect The Battery Before Starting.
• Remove Trim: Carefully remove any overhead trim or plastic cover hiding the mirror mount to avoid damaging clips.
• Release Mirror From Mount: Depending On Mount Type, Slide The Mirror Off The Bracket Or Unscrew Fasteners. For Windshield-Mounted Mirrors With Adhesive Pads, Carefully Follow The Manufacturer Procedure To Remove The Adhesive Pad Without Damaging The Glass.
• Install New Mirror: Position The New Mirror On The Mount, Reconnect Any Electrical Connectors, And Secure Clips Or Screws Firmly. Replace Trim And Reconnect The Battery If Disconnected.
• Functional Check: Verify Mirror Position, Stability And Any Electrical Functions (Auto-Dim, Lights) Before Completing The Job.

Installation Recommendations

• Use Appropriate Tools: Plastic trim tools protect interior panels and clips during removal.
• Follow Manufacturer Procedures: For Windshield Adhesive Mounts Use Approved Adhesive Kits If The Mounting Pad Is Replaced.
• Handle Electrical Connectors With Care: Ensure Connectors Are Clean And Fully Engaged; Reconnect The Battery Only After All Connections Are Secure.
• Check Alignment: Adjust Mirror Position For Optimal Rear Visibility And Ensure Mounting Is Rigid To Prevent Vibration.

Why This Part Fails Most Often

• Impact Damage: Road Debris Or Minor Collisions Can Crack The Glass Or Break The Mount.
• Mounting Failure: Plastic Clips Or Adhesive Pads Can Degrade Over Time, Causing The Mirror To Loosen Or Fall Off.
• Moisture Ingress: For Mirrors With Electrical Components, Water Penetration Can Cause Malfunctions Or Short Circuits.
• Wear And Tear: Frequent Adjustments And Vibrations Can Cause Internal Mechanisms To Loosen, Leading To Unstable Mirror Position.

Often searched by part number 8149NA. Order this direct-fit interior mirror to restore factory appearance and safe rear visibility.

Are you looking for an original interior rearview mirror for Citroën or Peugeot with code 8149FF? We offer a used, fully functional OEM PSA part that fits perfectly and maintains the original interior appearance. This part is NFP (No Further Production) – new is no longer produced, so a quality used original is the best choice.

Key benefits
– Original PSA part: exact fit, no vibrations, original appearance
– Day/night version: convenient manual switching against glare
– Color FBJ – LAMA: light gray shade for matching interiors
– A cost-effective and proven alternative to a new part (NFP)

Technical information
– OE/PSA number: 8149FF (also listed as 8149.FF, 8149 FF)
– Design: internal rear-view mirror, mechanical day/night switching
– Colour/interior: FBJ – LAMA (light grey)
– Mounting: on a foot glued to the windshield (PSA standard); assembly by sliding/turning into the lock
– Electrical equipment: without electrochrome (without automatic dimming), without connector; does not serve as a rain/light sensor holder
– Package contents: mirror with foot mount; the glued foot is part of the windshield, not part of the part

Compatibility
– Citroën: C2, C3, C4 (selected versions and equipment)
– Peugeot: 1007, 307 (I)
Note: Different equipment may have a different design of the mirror (e.g. electrochromic). To be sure, check the match against part number 8149FF or VIN.

Condition and origin
– Used original PSA part, functionally tested
– Normal cosmetic signs of use possible; the condition corresponds to the photos in the product detail

Assembly tip
– When removing/installing, do not handle the metal/glued foot on the glass to avoid damaging the windshield.
– The mirror is placed on the foot and locked by clicking/turning. Assembly is a matter of minutes, without the need for electrical connections.

Frequently searched terms (SEO)
– interior mirror Citroën C2 C3 C4
– interior mirror Peugeot 307 1007
– interior/central day/night mirror
– original mirror PSA 8149FF, 8149.FF, FBJ LAMA, NFP

Not sure about compatibility? Email us the part number 8149FF or VIN – we’ll be happy to verify the correctness for free.

This right side mirror is specifically designed for the Citroën C3 and offers advanced features such as electric folding, heating, and an integrated temperature sensor. Its functionality ensures improved visibility and comfort during driving, especially in adverse weather conditions.

Technical Information

• Manufacturer: Citroën (Original Equipment Manufacturer)
• Model: Citroën C3
• Product Codes: 8149FP
• Additional Numbers: 9 wires configuration (5+4 wiring)

Features and Benefits

The mirror is electrically operated with a folding mechanism, allowing convenient adjustment and protection from damage when parked. The heating function prevents fogging and ice formation for a clear view in cold climates. The temperature sensor supports vehicle systems for better climate control and safety.

Installation and Maintenance

Installation requires disconnecting the factory mirror from the passenger side of the Citroën C3. The 9-wire harness should be connected carefully to maintain heating and sensor functionality. Typically, side mirrors may require replacement due to physical damage or electrical failures in the folding or heating components. Regular inspections help ensure optimal operation and extend the lifespan of the part.

Suitable Models

Compatible primarily with Citroën C3 hatchback models where the original mirror part number 8149FP is specified. Always verify the part number compatibility with the vehicle VIN or manufacturer catalog before purchase.

The mirror provides standard rear visibility and, depending on the specific variant, may feature a manual day/night adjustment or an electrical connector for auto-dimming and integrated sensors. Always check the product codes and the vehicle specification to confirm whether your vehicle requires a plain mirror or a variant with electrical functions.

Replacement is straightforward for a competent technician or an experienced DIYer: remove any headliner or trim covering the mirror mount, unclip or unscrew the mirror from the mounting button or bracket, disconnect electrical connectors if present, fit the replacement on the existing mounting button or secure it to the bracket, and verify correct alignment and any electrical functions. Bonded mirrors require the correct windshield mounting button and adhesive procedure; mirrors that clip onto a pre-installed button are quicker to swap.

Common causes of mirror failure include impact damage, cracked or delaminated glass, broken mounting studs or adhesive failure on the windshield button, and electrical faults in models with auto-dimming. Under normal use, mirrors are durable, but external impacts and wear to adjustment mechanisms are the most frequent reasons for replacement.

This mirror is an economical and environmentally sensible option compared with new OEM parts, while remaining suitable for daily use. Each unit is inspected before sale to ensure functionality and quality. If you are unsure about fitment or installation, contact our support with your vehicle VIN or the product code listed below.

Technical Information

• Manufacturer: Citroën and Peugeot
• Model: Citroën C2, C3, C4; Peugeot 307, 407, 1007
• Product Codes: 8148Y7, 8148KK, 8153LH
• Other Numbers: 8148KK, 8153LH

Interior rearview mirror compatible with Citroën C2, C3, C4 and Peugeot 1007, 307, 407 models. This mirror matches common PSA part numbers and is suitable for professional workshops and DIY car owners who need a reliable replacement part. Compatible codes: 98044718XT, 8148Y7, 8148KK, 8153LH.

Technical Information

• Manufacturer: PSA Citroën Peugeot
• Model: Citroën C2, C3, C4; Peugeot 307, 407, 1007
• Product Codes: 98044718XT, 8148Y7, 8148KK, 8153LH
• Other Numbers: See vehicle compatibility and part cross-reference for exact fit

The interior rearview mirror provides the driver with a clear view of the road behind and is an essential safety component. Common reasons for replacement include accident damage, cracked or delaminated glass, broken mounting brackets or aging that causes looseness or vibration.

Installation is relatively straightforward and generally does not require special tools. Typical replacement steps: remove any trim or mirror cover, release the mirror from its mounting plate or slide it off the mirror base, attach the replacement to the mount and ensure it is securely clipped or tightened. Some vehicles use a simple clip-on system while others may use a small retaining screw or Torx fastener.

Before ordering, verify the product codes against your vehicle’s VIN or existing part number to ensure correct fitment. While many mirrors share the same mounting interface across PSA models, slight variations can occur between production years and trim levels.

Purchasing a well-matched replacement mirror saves time in the workshop and restores full rear visibility. Our mirrors are carefully selected and tested for fit and function to meet workshop standards.

Order now to get a direct-fit interior mirror for your Citroën or Peugeot and minimize downtime — suitable for mechanics and competent DIY installers.

This interior rearview mirror is a direct replacement designed for Citroën and Peugeot vehicles. It restores clear rear visibility and factory fitment for daily driving and workshop repairs. Product code 815340 helps technicians and DIY enthusiasts locate the correct part quickly.

Compatibility

Compatible Models: Citroën C2, Citroën C3, Citroën C4; Peugeot 307 (including 307 I) and Peugeot 1007. Always confirm the mirror mounting type and vehicle build year before ordering to ensure correct fitment.

Function And Typical Failure Modes

The rearview mirror provides a stable field of vision to support safe lane changes and reversing. Common reasons for replacement include impact damage, cracked glass, loosened or damaged mounting button, adhesive failure between the windshield and the mounting plate, or internal degradation from long-term vibration and wear.

Replacement Instructions

Replacement is straightforward for trained mechanics and experienced DIYers. Typical procedure:

• Park the vehicle on a level surface and protect interior trim.
• Remove the plastic trim cover around the mirror mount if present.
• Loosen the retaining screw or depress the release tab and slide the mirror off the mounting button.
• Position the new mirror on the mounting button, align and secure; reattach the trim cover.

Note: After a windshield replacement you may need to replace or re-glue the mirror mounting button to guarantee safe and secure attachment.

Technical Information

• Manufacturer: PSA Citroën Peugeot
• Model: Citroën C2, Citroën C3, Citroën C4; Peugeot 307, Peugeot 1007
• Product Codes: 815340
• Additional Numbers: 815340

If you are a professional mechanic or carrying out a DIY repair, searching by product code 815340 will help you find the correct replacement quickly. This mirror restores safe rear visibility and ensures a neat, factory-like installation.