Product Overview

This left-hand (driver’s side) replacement exterior mirror is designed for Peugeot 307 first-generation vehicles. It features full electric adjustment, integrated heating and power-folding function to protect the mirror when parked. The mirror housing is painted in color code EZW (grey metallic) and connects via a 7-pin (5+2) connector. Ideal for professional workshops and DIY mechanics looking for a direct-fit, functional replacement part.

Technical Information

• Manufacturer: Stellantis (Peugeot)
• Model: Peugeot 307 I – Left/Driver Side Exterior Mirror
• Product Codes: 8149VV
• Other Numbers: Color Code EZW (Grey Metallic), 7-Pin Connector (5+2)

Fitment

Fits Peugeot 307 First Generation (307 I) vehicles equipped with electric adjustment, heating and electric folding. Confirm that the vehicle uses a 7-pin (5+2) mirror connector and that the original mirror is left-hand (driver side).

Installation Recommendations

• Prepare basic tools: Torx/screwdrivers, trim tools and a ratchet set.
• Carefully remove the interior door trim/triangular cover to access the mirror mounting bolts and electrical connector. Use a trim tool to avoid breaking clips.
• Disconnect the mirror electrical connector before removing the mirror. If unsure, disconnect the negative battery terminal as a safety precaution.
• Remove mounting bolts, take off the old mirror and transfer any required seals or covers to the new unit.
• Mount the new mirror, tighten bolts to the correct torque, reconnect the electrical connector and reassemble the trim.
• Test electric adjustment, heating and folding functions before finishing. Verify smooth folding and that the heating element warms when activated.

Why This Part Fails Most Often

• Impact Damage: Collisions or knocks are the most common cause—broken housing, cracked glass or damaged folding gears.
• Water Ingress And Corrosion: Moisture entering the connector or actuator can corrode contacts and cause intermittent or permanent failure of motors or heating elements.
• Wear Of Electric Motors And Gears: Frequent adjustment and folding can wear the small motors and reduction gears over time.
• Wiring And Connector Damage: Door flexing and pinching can damage wires, causing loss of functions.

Maintenance Tips

• Avoid forcing the mirror when frozen; use the heated function or warm the area first to prevent gear damage.
• Regularly check and clean the connector and rubber gaiter to prevent water ingress.
• Inspect mirror mounting and door trim after impacts to catch hidden damage early.

Additional Notes

Multiple color options may be available. The mirror is supplied as a complete unit with electric adjustment, heating and power-folding. Verify connector type (7-pin 5+2) and left-hand orientation before installation.

This replacement right (passenger side) exterior mirror is designed for Peugeot 307 vehicles and offers full electric adjustment, heating element and power-folding function for convenience and safety. The integrated temperature sensor helps reduce fogging and improves demisting performance. The mirror is compatible with the 8-pin connector arrangement (6+2 pin configuration) used on affected models and is finished in EZW gray metallic paint for a factory-fit appearance.

Key Features

• Electric Adjustment: Precise motorized adjustment of mirror glass for quick setup.
• Heated Glass: Built-in heating element to clear ice and condensation faster.
• Power-Folding: Electrically foldable to reduce risk of damage in tight parking situations.
• Temperature Sensor: Assists demisting and can be used by vehicle climate systems.
• Connector: 8 Pin (6+2) wiring harness for direct replacement.
• Finish: EZW Gray Metallic Paint for correct visual match.

Technical Information

• Manufacturer: Peugeot (Stellantis)
• Model: Peugeot 307 (First Generation)
• Product Codes: 8149VT
• Other Numbers: EZW (Color Code), 8 Pin (6+2), EZWD (referenced in some listings)

Installation Recommendations

Installation is suitable for experienced DIYers and professional mechanics. Typical replacement procedure:

1. Park the vehicle on a level surface, engage the parking brake and disconnect the negative battery terminal to avoid short circuits when working on electrical components.
2. Remove the interior door trim or triangular trim cover to access the mirror mounting bolts and electrical connector. Keep fasteners and clips organized.
3. Unplug the mirror wiring harness (8-pin) and carefully remove the mounting bolts holding the mirror to the door.
4. Fit the new mirror, route the harness without pinching, connect the electrical plug and loosely tighten the bolts. Verify correct operation (adjustment, heating, folding) before fully torquing fasteners to manufacturer specification.
5. Reinstall interior trim pieces and reconnect the battery. Check all mirror functions and adjust mirror glass as required.

Why This Part Fails Most Often

• Mechanical Damage: Impacts and knocks are the most common cause of mirror replacement (parking incidents, road debris).
• Water Ingress and Corrosion: Moisture can corrode connectors and motors, especially in older vehicles or after door panel repairs.
• Wear Of Actuator Motors: Frequent adjustment and folding cycles can wear the small electric motors and gears over time.
• Electrical Faults: Broken wires, connector damage or failed heating elements can stop mirror functions.
• Freezing And Ice Build-Up: Repeated exposure to ice can overload the heater and moving parts if not properly cleared.

Additional Notes

Check the connector pin count and color code when ordering to ensure compatibility: this unit uses an 8-pin (6+2) connector and is color-coded EZW (gray metallic). When replacing heated or powered mirrors, always verify operation of adjustment motors, heating element and folding function before completing the installation. Regularly inspect door seals and connectors to reduce risk of corrosion and premature failure.

Recommended For

Professional Auto Technicians And Competent DIYers Working On Peugeot 307 Vehicles Who Need A Direct-Fit Right Passenger Side Heated And Power-Folding Mirror (Product Code 8149VT).

Upgrade or replace a worn or damaged door mirror with this direct-fit right side mirror for the Peugeot 307. Designed for mechanics and experienced DIYers, this electrically adjustable mirror ensures reliable adjustment and clear rear visibility for safe driving. The unit is in good working order though the housing may show minor paint scratches; there are no cracks and the mechanism is fully operational. The mirror uses a 6-pin connector and is finished in EZA Sidobre Grey paint.

Technical Information

• Manufacturer: Stellantis / Peugeot
• Model: Peugeot 307 (including 307 I)
• Product Codes: 8149AX, EZAC
• Other Numbers: Color Code EZA (Sidobre Grey); 6-Pin Electrical Connector

Compatibility

Intended For Passenger Side Of Peugeot 307. Commonly Used On 307 Models With Electric Mirror Adjustment And 6-Pin Connector. Always Verify Connector Type And Mounting Pattern Before Installation.

Installation Recommendations

Follow these general steps when replacing the mirror: remove the interior trim panel on the door to access the mirror bolts, disconnect the 6-pin electrical connector, unscrew and remove the old mirror, fit the replacement and reconnect the connector, test the electrical adjustment before reassembling the door trim. Use correct torque for fasteners and ensure wiring clips are secured to avoid rattles. For safety, isolate the vehicle electrical system as recommended for your workshop practices before working on door electrics.

Why This Part Most Often Fails

Side mirrors commonly fail because of impact damage (parking knocks, collisions) that breaks the housing or glass, water ingress that corrodes connectors or motors, wear of the internal adjustment motor after many cycles, or sun and temperature exposure that degrades plastic components and paint. Minor cosmetic scratches to the housing do not affect function but are common on used units.

Practical Tips

• Before fitting, inspect the 6-pin connector for bent pins or corrosion and clean if necessary.
• Test mirror adjustment and any integrated functions (e.g., heating, if present on your vehicle) before reassembling the door card.
• If the vehicle has electrical folding or heating functions, confirm those features are supported by this mirror variant.
• Keep replacement fasteners and clips in good condition to ensure a secure fit and prevent wind noise.

Condition Note

Unit May Present Minor Paint Scratches But Is Not Cracked And Is Fully Functional As Described Above.

Upgrade or replace your damaged right side mirror with a direct-fit unit designed for Peugeot 307 models. This electrically adjustable mirror includes an integrated temperature sensor with a 6-pin connector and comes finished in ETS Cendre Gray paint. Ideal for professional mechanics and DIY enthusiasts, the unit restores full mirror adjustment and sensor functionality without the need for additional parts. Minor paint blemishes may be present, but the mirror is structurally intact and fully operational.

Technical Information

Manufacturer: Stellantis / Peugeot
Model: Peugeot 307 (307 I) — Passenger Door Right
Product Codes: 8149A, 8149AX, 8149AX ETSC
Other Numbers: ETSC

Key Features

• Electrically adjustable mirror motor for precise positioning.
• Integrated temperature sensor (6-pin connector) for climate and mirror-heating functions.
• Painted Finish: ETS Cendre Gray — ready to fit without additional painting for matching interiors/exteriors.
• Direct fit for Passenger Door (Right Side) on Peugeot 307 models.

Installation Recommendation

Disconnect the vehicle battery before starting work to prevent electrical shorts. Typical replacement steps:

1. Remove the interior mirror trim or triangular door cover to access mounting fasteners.
2. Unscrew the mirror mounting bolts while supporting the mirror from the outside.
3. Carefully unplug the 6-pin electrical connector for the motor and temperature sensor.
4. Fit the new mirror, connect the 6-pin connector, and loosely install mounting bolts.
5. Reconnect the battery, test mirror adjustment, heating and sensor signals, then tighten mounting bolts to manufacturer torque and reassemble the trim.

Why This Part Fails Most Often

• Impact Damage: Collisions or knocks from curbs and doors are the most common causes of physical failure.
• Water Ingress and Corrosion: Moisture can corrode connectors or motor terminals, causing intermittent or permanent electrical failure.
• Motor Wear: Repeated use and age can wear the adjustment motor, reducing responsiveness or causing failure.
• Sensor Faults: Temperature sensors or wiring can fail due to corrosion or wiring fatigue.

Practical Notes

This mirror is suitable for mechanics and experienced DIYers who are comfortable removing door trim and working with electrical connectors. Verify connector type and mirror mounting pattern visually before installation. After installation, always confirm full functionality of electric adjustment and sensor outputs prior to final reassembly.

Order this right exterior mirror for Peugeot 307 to restore safe visibility and full mirror functionality — a cost-effective replacement that gets your vehicle back on the road quickly.

This replacement left mirror is designed for mechanics and experienced DIYers who need a reliable, direct-fit solution for Peugeot 307 vehicles. The unit combines electric adjustment, heating element and power-folding for convenient operation and improved safety in cold or wet conditions. It is commonly referenced under product code 8149VV and is available in different finishes — please check the color code (LKR) to match your vehicle’s paint.

Key Features

• Driver’s Side (Left) Exterior Mirror for Peugeot 307
• Electric Adjustment for precise mirror positioning
• Integrated Heating Element to clear ice and fog
• Electric Folding Mechanism for parking protection
• Painted Finish: LKR – Babylone Red
• Connector: 7‑pin (5+2)
• Typical Professional or DIY Replacement Part Number: 8149VV

Technical Information

• Manufacturer: Stellantis / Peugeot
• Model(s): Peugeot 307 (including 307 I)
• Product Codes: 8149VV
• Other Numbers: 7 PIN (5+2); Color Code: LKR (Babylone Red)

Installation Recommendations

• Before starting, disconnect the negative battery terminal to avoid short circuits and unintended airbag deployment.
• Remove the interior door trim or triangular mirror cover following the vehicle manufacturer’s procedure to access the mirror mounting bolts and connector.
• Carefully unplug the 7‑pin connector and compare pins to ensure full correspondence (5+2 configuration).
• Support the mirror during removal to prevent damage to the glass or paint. Remove mounting nuts, fit the new mirror, and torque fasteners to manufacturer specifications if available.
• Reconnect the electrical connector, reconnect the battery and test all functions (adjustment, heating and folding) before refitting the door trim.
• Check mirror alignment and ensure the painted finish matches surrounding panels. Replace any damaged clips or fasteners removed during disassembly.

How The Part Is Replaced

Typical replacement involves removing the interior trim piece near the mirror, disconnecting the electrical connector, unbolting the mirror from the door, and fitting the new unit in reverse order. After connection, verify mirror adjustment, heater activation and folding operation. Reassemble the door trim once correct operation is confirmed.

Why This Part Fails Most Often

• Mechanical Damage: Impact or collisions commonly crack the mirror housing or glass.
• Water Ingress And Corrosion: Moisture can corrode connectors, wiring and the small electric motors, causing failures in adjustment, heating or folding functions.
• Wear Of Internal Actuators/Gears: Repeated use can wear the plastic gears inside the folding mechanism or the adjustment motor.
• Connector Or Wiring Faults: Broken pins, loose terminals or damaged wiring in the door harness lead to intermittent or total loss of function.
• Electrical Supply Issues: Blown fuses, faulty switches or relays can appear as mirror failures but originate elsewhere in the vehicle’s electrical system.

Notes For Professionals

When replacing, ensure connector pinout and available functions (heated, folding, memory if applicable) match the vehicle specification. Test all features before completing the job to avoid return visits. For painting or color-matched units, confirm the LKR color code corresponds to the vehicle’s paint.

Keywords: Left mirror, Driver side mirror, Peugeot 307 mirror, Electric folding mirror, Heated mirror, 8149VV.

This replacement right passenger mirror is designed for professional workshops and DIY mechanics who demand reliable fitment and full functionality. It restores electric adjustment, heating and power folding functions while matching the vehicle colour LKR (Red Babylone). The part number 8149VT is commonly used when searching for compatible units.

Features

• Electric Adjustment For Precise Mirror Positioning
• Heated Glass To Reduce Fogging And Ice Build-Up
• Electric Folding Mechanism For Parking And Narrow Spaces
• Integrated Temperature Sensor For Climate-Related Functions
• Colour Matched To LKR – Paint Red Babylone
• 8 Pin Connector Configuration (6+2)

Technical Information

• Manufacturer: Peugeot (Stellantis)
• Model: Peugeot 307 (307 I)
• Product Codes: 8149VT, LKRD
• Additional Numbers: Connector 8 Pin (6+2); Colour Code LKR (Red Babylone)

Compatibility And Application

Suitable For Front Right Passenger Side Of Peugeot 307 Models Where The Vehicle Uses An 8-Pin Mirror Connector And Colour Code LKR. Often Searched Under Part Number 8149VT.

Installation Recommendations

• Disconnect The Battery Before Starting Work To Avoid Short Circuits And Airbag System Issues.
• Remove Interior Door Panel To Access Mirror Fasteners And Wiring Harness.
• Carefully Disconnect The 8-Pin Connector And Any Additional Plugs (Heater/Temperature Sensor).
• Unscrew Mirror Mounting Bolts, Replace Unit, And Refit Bolts To Manufacturer Torque Settings.
• Reconnect Wiring And Test All Functions (Adjustment, Heating, Folding, Sensor Signals) Before Reassembling Door Trim.
• Follow Manufacturer Procedures To Avoid Damage To Clips, Wiring, Or Door Trim.

Most Common Reasons For Failure

• Water Ingress Causing Corrosion Of Connectors And Electric Motors.
• Wear Of Adjustment Motors Or Gearsets After Years Of Use.
• Mechanical Damage From Impacts Or Folding-Related Stress.
• Faulty Heating Element Or Broken Wiring To The Heated Glass.
• Damage To Folding Mechanism Due To Obstructions Or Ice.

Replacing A Faulty Mirror Restores Safety And Convenience — Clear Rearward Vision And Reliable Operation Are Essential For Everyday Driving. Order By Part Number 8149VT To Ensure Fast Identification And Compatibility.

High-quality replacement left exterior mirror designed for Peugeot 307 vehicles, ideal for professional mechanics and DIY enthusiasts. This electrically operated mirror with a 5-pin connector restores original functionality for mirror adjustment and auxiliary features depending on vehicle equipment. The EZAC grey paint finish delivers a near-original color match for painted mirror housings and helps maintain the vehicle’s appearance after repair. Commonly searched under code 8149AW, this unit is a practical choice when the original mirror housing, motor or glass is damaged by impacts, wear or connector faults.

Technical Information

• Manufacturer: Peugeot (Stellantis)
• Model: Peugeot 307 (307 I)
• Product Codes: 8149AW
• Additional Numbers: EZAC (Paint Code); 5-Pin Connector

Technical Specifications

• Side: Driver Side (Left)
• Operation: Electrically Operated
• Connector: 5-Pin Electrical Plug
• Color: EZAC – Grey Paint (Sidobre)
• Functionality: Mirror Adjustment Via Electric Motor; Additional Features Depend On Vehicle Equipment

Fitment And Compatibility

Designed For Peugeot 307 First Generation (307 I). Ensure That The Vehicle Uses The Same Mirror Mounting And 5-Pin Electrical Connector Configuration. This Unit Replaces Exterior Left Mirrors With Painted Housing In EZAC Grey Finish And Electrical Adjustment Function.

Installation Recommendation

Before Starting Work, Always Disconnect The Vehicle Battery To Prevent Short Circuits And Protect Electronic Systems. Remove Interior Door Trim Or Access Panel To Reach Mirror Mounting Bolts. Disconnect The 5-Pin Connector Carefully And Unbolt The Mirror From The Door. Install The Replacement Mirror By Reversing The Procedure: Fit And Torque Mounting Bolts Evenly, Reconnect The Electrical Connector, Test Mirror Adjustment And Any Additional Functions Before Reassembling The Door Trim. Use Manufacturer Torque Specs Where Available And Avoid Overtightening To Prevent Damage To The Mirror Base.

Common Failure Causes

• Impact Damage From Collisions Or Parking Incidents Causing Cracked Housing Or Broken Glass.
• Wear Or Seizure Of The Electric Adjustment Motor Due To Mechanical Fatigue Or Contamination.
• Corrosion Or Poor Contact In The Electrical Connector Leading To Intermittent Function.
• Damaged Folding Mechanism Or Mounting Points After Repeated Stress Or Accidents.

Why Choose This Mirror

This mirror Offers A Direct Replacement Option With The Same Connector Type And Painted Finish, Minimizing Prep Work And Ensuring A Clean Visual Result. It Is Practical For Fast Repair Jobs In Workshops And For Enthusiasts Performing Their Own Bodywork Or Mirror Replacements.

Notes For Professionals

When Replacing Mirrors In Fleet Or Workshop Environments, Check For Additional Features Such As Heating, Auto-Dimming Or Folding That May Require Specific Connector Pins Or Additional Wiring Adaptation. Verify Smooth Operation After Installation And Address Any Corrosion Or Wiring Damage Found During Removal To Prevent Recurring Issues.

High-quality interior rearview mirror designed for direct replacement on Citroën and Peugeot vehicles. This mirror, commonly searched under part number 8149NA, restores clear rear visibility and maintains the original interior appearance. It is suitable for professional workshops and skilled DIY enthusiasts who perform routine interior replacements. The mirror comes in color code FBJ – LAMA to match original upholstery and trim finishes.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Citroën C2, Citroën C3, Citroën C4, Peugeot 307, Peugeot 1007
• Product Codes: 8149NA
• Additional Numbers: Color Code FBJ – LAMA

Function And Description

The interior rearview mirror provides the driver with a clear central view of the traffic behind the vehicle. Depending on vehicle equipment, the mirror may be a simple manual unit or include integrated features such as auto-dimming, ambient lighting, or housing for sensors. This listed unit is supplied to match original mounting points and interior color.

Replacement Procedure

• Prepare The Vehicle: Park on a level surface and engage the parking brake. If The Mirror Has Electrical Connections (e.g., Auto-Dim Or Lighting), Disconnect The Battery Before Starting.
• Remove Trim: Carefully remove any overhead trim or plastic cover hiding the mirror mount to avoid damaging clips.
• Release Mirror From Mount: Depending On Mount Type, Slide The Mirror Off The Bracket Or Unscrew Fasteners. For Windshield-Mounted Mirrors With Adhesive Pads, Carefully Follow The Manufacturer Procedure To Remove The Adhesive Pad Without Damaging The Glass.
• Install New Mirror: Position The New Mirror On The Mount, Reconnect Any Electrical Connectors, And Secure Clips Or Screws Firmly. Replace Trim And Reconnect The Battery If Disconnected.
• Functional Check: Verify Mirror Position, Stability And Any Electrical Functions (Auto-Dim, Lights) Before Completing The Job.

Installation Recommendations

• Use Appropriate Tools: Plastic trim tools protect interior panels and clips during removal.
• Follow Manufacturer Procedures: For Windshield Adhesive Mounts Use Approved Adhesive Kits If The Mounting Pad Is Replaced.
• Handle Electrical Connectors With Care: Ensure Connectors Are Clean And Fully Engaged; Reconnect The Battery Only After All Connections Are Secure.
• Check Alignment: Adjust Mirror Position For Optimal Rear Visibility And Ensure Mounting Is Rigid To Prevent Vibration.

Why This Part Fails Most Often

• Impact Damage: Road Debris Or Minor Collisions Can Crack The Glass Or Break The Mount.
• Mounting Failure: Plastic Clips Or Adhesive Pads Can Degrade Over Time, Causing The Mirror To Loosen Or Fall Off.
• Moisture Ingress: For Mirrors With Electrical Components, Water Penetration Can Cause Malfunctions Or Short Circuits.
• Wear And Tear: Frequent Adjustments And Vibrations Can Cause Internal Mechanisms To Loosen, Leading To Unstable Mirror Position.

Often searched by part number 8149NA. Order this direct-fit interior mirror to restore factory appearance and safe rear visibility.

Overview

High-quality left (driver) exterior mirror designed for Peugeot 307 vehicles. This unit provides electric adjustment, integrated heating for rapid de-icing/defogging, and an electric folding mechanism for improved protection in tight parking situations. The mirror is supplied in color code KKN (Aden Red) and features a 7-pin (5+2) electrical connector. Commonly searched under product code 8149VV and reference KKNB.

Key Benefits

• Direct fit for matching Peugeot 307 models (see Technical Information).
• Electric heating speeds up demisting in cold or wet conditions.
• Electric folding reduces risk of damage when parking and improves clearance in narrow spaces.
• 7-pin connector preserves original wiring for fast replacement without splicing.
• Color-matched finish (KKN Aden Red) for a factory appearance.

How It Works

The mirror houses an electric actuator for mirror glass adjustment, a resistive heating element behind the glass to clear frost and condensation, and an electric folding motor assembly. Signals travel through the 7-pin connector (5 pins for adjustment/heater and 2 pins typically for folding or additional functions depending on vehicle wiring) to operate each function from the cabin controls.

Replacement Procedure

Recommended for experienced technicians or competent DIY mechanics. Typical replacement steps:

• Disconnect the vehicle battery to avoid short circuits and protect vehicle electronics.
• Remove the interior door trim or triangular cover to access mirror fasteners and electrical connector.
• Disconnect the 7-pin electrical connector and remove mounting nuts/bolts securing the mirror to the door.
• Remove the old mirror, fit the new unit in position and secure fasteners to the manufacturer’s torque specification.
• Reconnect the electrical connector and reconnect the battery.
• Verify full functionality: mirror adjustment, heating operation, and folding mechanism. Check for correct fit and panel alignment.

Installation Recommendations

Always follow manufacturer safety procedures. Use proper trim tools to avoid breaking door clips and take care around side airbag modules—if the vehicle is equipped with airbags, consult vehicle service literature before removing trim. Ensure connector pins are clean and undamaged; apply contact cleaner if necessary. After installation, test all mirror functions and check for noise or binding in the folding mechanism. If bodywork was repainted, verify color match (KKN Aden Red) before final assembly.

Why This Part Fails Most Often

• Impact Damage: Collisions or knocks while parking are the most frequent cause of mirror failure (broken housing, cracked glass, bent actuator).
• Water Ingress and Corrosion: Moisture can corrode electrical contacts or short motors/heaters, causing intermittent or permanent failure.
• Wear Of Folding Mechanism: Repeated folding/unfolding and mechanical stress can wear gears or motor brushes over time.
• Connector Issues: Pin corrosion or damaged wiring at the 7-pin connector can disable one or more functions.

Technical Information

• Manufacturer: Stellantis (Citroën/Peugeot)
• Model: Peugeot 307 (First Generation / 307 I)
• Product Codes: 8149VV, KKNB
• Other Numbers: Connector 7-pin (5+2); Color Code KKN (Aden Red)

Compatibility Notes

Designed primarily for Peugeot 307 (307 I) models. Confirm that the 7-pin connector and folding function match the original unit on the vehicle before installation. The product code 8149VV and reference KKNB are commonly used in searches for this mirror.

Final Advice

If replacing after an impact, inspect the door mounting area and wiring harness for hidden damage. For a neat cosmetic result, verify paint code KKN (Aden Red) and consider professional painting if exact color matching is required. After fitting, perform a full functional check and adjust mirror position as needed.

Part description

Right electric rearview mirror for Peugeot 307 with heating function, electric folding and integrated temperature sensor. The part is in the color KKN – Aden red lacquer and is intended for the passenger side. Thanks to the 8 PIN (6+2) connector, it is suitable for designs with the same cabling and equipment.

If you are looking for a part by number, the key designation is 8149VT (also color code KKNB). Ideal choice for quick replacement after mirror damage or non-functioning heating/folding.

Technical information

• Manufacturer: Stellantis Citroën Peugeot
• Model: Peugeot 307
• Other numbers: KKNB
• Side: right (passenger)
• Control: electric
• Functions: heating, electric folding, temperature sensor
• Color: KKN – Aden red lacquer
• Connector: 8 PIN (6+2)

Product codes

• Product codes: 8149VT, KKNB

Installation recommendations

Generally/typically for rearview mirror replacement the procedure below applies. The exact steps may vary depending on the specific design of the door and the equipment of the car.

1) Before assembly (checks of used part)

• Check that it is a right-hand mirror and that it has the required functions: electric control, heating, electric folding, temperature sensor.
• Compare the connector and number of pins (8 PIN / 6+2) with the old part.
• Verify condition of tilt mechanism (no excessive play), undamaged cover and glass, and undamaged wiring/grommet.
• Visually check that the attachment points are not cracked.

2) Necessary tools and materials (in general)

• Set of screwdrivers and bits (according to the type of connecting material in the door)
• Plastic pry bar for removing the upholstery (so as not to damage the plastic/upholstery)
• Ratchet/extensions (according to type of nuts/bolts)
• Contact cleaner (recommended) and cloth
• Insulating tape / cable ties to secure cabling (as needed)

3) Step-by-step assembly procedure

1. Turn off the ignition and disconnect the battery for safety reasons (especially for the electrical equipment in the doors).
2. Dismantle the inner cover at the mirror (triangular plastic at the A-pillar) and, if necessary, release a part of the door trim so that you can get to the mirror attachment.
3. Locate the mirror connector in the door and disconnect the electrical connector (do not pull the cables, but the body of the connector).
4. Loosen the mirror fasteners (nuts/bolts) and hold the outside of the mirror with your other hand to prevent it from falling.
5. Remove the old mirror and check the contact surface (dirt, gasket residues) – clean it.
6. Prepare the new mirror: check the wiring, the grommet and whether the seal fits properly.
7. Place the mirror on the door, align the position and manually screw the fastening so that the threads do not catch crookedly.
8. Tighten the fasteners evenly so that the mirror sits firmly and the gasket fits well (without overstretching).
9. Plug in the electrical connector and make sure it snaps in properly and the wiring is not pinched.
10. Refit the covers/upholstery and check that all clips fit and do not give out.
11. Connect the battery and turn on the ignition.
12. Test the functions: mirror adjustment, folding, heating (depending on the car control) and basic control of the response of the temperature sensor (if display/control is linked to it in the equipment).
• 4) Post-assembly checks and test drive/function verification
  • Check that the mirror does not vibrate while driving and is stable.
  • Verify that folding occurs smoothly and without atypical sounds.
  • After rain/washing, check that the seal fits well and does not leak into the door.

  5) The most common assembly mistakes + how to avoid them

  • Swapping the connector/pins: always compare the 8 PIN (6+2) with the old mirror.
  • Pinched wiring: guide the harness so that it is not in contact with the edges of the sheet metal and is not pinched by the upholstery.
  • Damage to upholstery clips: use a plastic pry bar and loosen gradually.
  • Incorrect seating of the gasket: clean the seating surface and align the position of the mirror before tightening.

  Reasons why the part is damaged

  • Impact/abrasion (parking, narrow passageways) – cracking of the cover, breakage of the attachment or damage to the folding mechanism.
  • Damage to electric folding – gear wear, dirt ingress or mechanical stiffness.
  • Non-functional heating – broken wires, oxidation of connectors, damaged heating elements in the glass.
  • Contacts/wiring problems – wire fatigue in door grommet, bad contact in connector.
  • Temperature sensor damage – mechanical damage or moisture in the sensor/connector area.
  ]]>