Description

Precision-molded dashboard trim set designed for Citroën C3 II (A51). This set restores the visual integrity of the center section of the dashboard and the vent surrounds with a KDK – HICKORY finish, matching the original interior styling. Ideal for professional workshops and DIY mechanics looking for OE-style appearance and fitment. Frequently searched under part numbers 9685748677, 96857498ZD, 96857501ZD and secondary references 16070094K1, 16070095K1, 16070098K1.

Key Features

• Complete set Includes Central Dashboard Trim And Decorative Vent Surrounds.
• Finish KDK – Hickory For A Factory-Matched Look.
• Direct Fit For Citroën C3 II (A51) — Designed To Match Original Mounting Points And Clip Locations.
• Suitable For Use By Professional Technicians And Experienced DIY Mechanics.
• Commonly Identified By OEM Codes 9685748677, 96857498ZD, 96857501ZD.

Technical Information

• Manufacturer: Stellantis (Citroën/Peugeot)
• Model: Citroën C3 II (A51)
• Product Codes: 9685748677, 96857498ZD, 96857501ZD
• Other Numbers: 16070094K1, 16070095K1, 16070098K1

Installation Recommendation

Replace dashboard trim using plastic trim tools to avoid damaging adjacent panels. General replacement steps:

• Work In A Clean, Well-Lit Area And Keep Fasteners Organized.
• Start By Gently Releasing Trim Clips Around The Edges With A Plastic Pry Tool.
• Remove Any Retaining Screws Or Fasteners If Present And Detach The Old Trim Carefully To Avoid Breaking Clips.
• Inspect And Replace Broken Clips Or Retainers Before Fitting The New Trim For Secure Assembly.
• Align The New Trim To The Mounting Points, Then Press Firmly Around The Perimeter To Engage All Clips.
• After Installation, Check Vent Operation And Ensure There Are No Rattles Or Misalignments.

Most Common Failure Cause

Dashboard trim normally does not fail mechanically but shows deterioration over time. Typical reasons for replacement:

• UV And Heat Exposure Causing Fading, Discoloration Or Surface Degradation.
• Broken Or Brittle Clips Caused By Age, Repeated Removals Or Cold Conditions.
• Cosmetic Damage From Impact Or Heavy Cleaning Agents.
• Interior Repair Or Accident Repairs Where Trim Is Damaged Or Removed.

Replacing the trim renews the interior appearance and prevents loose panels that can cause noises. When performing the job, use appropriate trim tools and replace any damaged clips to ensure a secure, lasting fit.

This high-quality decorative trim frame is designed for the instrument cluster of the Citroën C3 II (A51). Ideal for professional workshops and DIY mechanics, the bezel restores the original interior appearance and ensures a factory-fit finish. The part is often searched by its product codes, so use the numbers below when looking up compatibility or ordering replacement pieces.

Technical Information

• Manufacturer: Stellantis (Citroën)
• Model: Citroën C3 II (A51)
• Product Codes: 96842894ZD, 96842894K1
• Additional Numbers: Finish KDK – HICKORY

Function And Fitment

The trim frame is a cosmetic and protective bezel that surrounds the instrument cluster. It secures the cluster edges, conceals fastening points and wiring gaps, and completes the dashboard’s visual appearance. Designed to match the original interior finish, it is intended specifically for the Citroën C3 II (A51) instrument cluster layout.

Installation Recommendations

• Always work with clean hands and a protected workspace to avoid scratching surrounding surfaces.
• Use plastic trim removal tools to carefully unclip the old bezel. Start at the lowest edge and progress evenly around the frame to avoid stressing the clips.
• Inspect all retaining clips and tabs during removal. Replace any broken or deformed clips to ensure a secure refit.
• Align the new trim carefully and press evenly until all clips engage. Do not force or bend the frame.
• Disconnecting the battery is recommended when removing interior trim near airbags or electrical connectors to prevent accidental deployment or short circuits.

Why This Part Fails Most Often

The most common causes of damage are mechanical stress and aging: plastic clips and tabs break during rough removal, repeated disassembly, or impact. Prolonged exposure to sunlight and heat can cause fading, crazing or cracking of the finish. Cosmetic wear such as scratches and scuffs is typical in high-use vehicles.

Replacement Notes For Mechanics And DIYers

When replacing the instrument cluster trim, check surrounding trim pieces and fasteners for damage—broken clips are frequently the actual cause of a loose bezel. Keep the part numbers 96842894ZD and 96842894K1 to confirm fitment and to order matching finish if required. This trim is primarily cosmetic but contributes to a secure and factory-correct installation of the instrument cluster.

Practical Tips

• Keep spare trim clips on hand; they are inexpensive and often needed after removal.
• Work slowly and use the correct tools to preserve the dashboard finish.
• If the surrounding dashboard shows heat or UV damage, consider addressing those issues to prevent repeated failures of new trim.

Upgrade or replace the center dashboard panel on your Citroën C3 II (A51) with this direct-fit trim surround. Designed to house the gear lever bezel and the climate control area, this panel restores the interior appearance and proper mounting of switches and controls. Frequently searched by part numbers 9801578777 and 98015787XU, this trim is ideal for mechanics and DIY enthusiasts who require an exact exterior and mounting match. The HXU Brillant Black finish gives a factory-correct glossy look and is easy to maintain.

Benefits

• Direct fit for Citroën C3 II (A51) – keeps factory mounting points and switch locations.
• Restores interior aesthetics and eliminates rattles caused by damaged or missing trim.
• HXU Brillant Black finish matches original dashboard surfaces for a seamless look.
• Often located via part numbers 9801578777 and 98015787XU for fast identification.

Technical Information

• Manufacturer: Stellantis / Citroën
• Model: Citroën C3 II (A51)
• Product Codes: 9801578777, 98015787XU
• Additional Numbers: HXU (Finish Code) – Brillant Black

Compatibility

Primarily intended for Citroën C3 II (A51) models. Search by part numbers 9801578777 or 98015787XU to confirm visual and mounting match for your vehicle.

Function And Common Failure Reasons

This center panel serves as the cosmetic and structural surround for the gear lever and climate control unit. It secures switches, conceals wiring and mounting hardware, and helps damp cabin noise. The most common causes of damage are broken plastic mounting clips and tabs from improper trim removal, wear and abrasion around the gear lever area, stress cracks from impacts, and discoloration or surface damage from prolonged sun exposure or aggressive cleaners. Faulty clips or cracks are the typical reasons owners replace this part.

Installation Recommendations

• Tools: Trim removal tools (plastic pry tools), Torx/Phillips drivers, small socket set. Avoid metal prying tools that can scratch the finish.
• Procedure: Remove the shift knob or shift boot if required, open any storage trays or ashtray to access hidden screws, unscrew fasteners, then carefully release retaining clips with plastic trim tools. Disconnect any electrical connectors for auxiliary sockets or switches before fully removing the panel. Reinstall by aligning mounting points, pressing clips home and refitting screws. Verify proper function of all switches and ensure the panel sits flush with surrounding trim.
• Tips: Keep removed clips and screws organized; replace any broken clips to avoid rattles. Clean contact surfaces and avoid excessive force when seating the panel to prevent cracking tabs.
• Approximate Time: 30–60 minutes for an experienced technician; longer for first-time DIY installers.
• Care: Clean with a mild, non-abrasive interior cleaner to preserve the Brillant Black finish.

Why This Part Is Often Searched By Part Number

Interior trim parts are commonly cross-referenced by OEM numbers. Mechanics and DIYers frequently use part numbers 9801578777 and 98015787XU when searching for an exact replacement to ensure correct color, finish and mounting configuration. Including these numbers in your search improves the chance of finding a perfect match.

Direct-fit center dashboard air vent assembly with a chrome slider designed for Peugeot 407. Finished in HXN Black Pearl, this unit restores airflow control and interior appearance where the original vent has worn, cracked, or lost its trim. Frequently sought under OE number 9644589777, the part is aimed at professional technicians and experienced DIYers who need a reliable, cosmetically correct replacement for the factory center vents.

Technical Information

• Manufacturer: Stellantis / Peugeot
• Model: Peugeot 407
• Product Codes: 9644589777
• Additional Numbers: HXN (Color Code)

Function And Benefits

The center air vent controls airflow direction from the HVAC system into the cabin and incorporates the slider control that opens or closes the vent. This unit combines functional restoration with a chrome-trimmed aesthetic, ensuring even air distribution, smooth slider operation, and a factory-like finish that matches dashboards trimmed in Black Pearl (HXN).

How To Replace

1. Prepare basic trim tools and a flat plastic pry tool to avoid damaging the dashboard finish.
2. Carefully pry out the surrounding trim bezel; work gently along the edges to release retaining clips.
3. Unsnap the center vent assembly from the dash and note the positions of any clips or guide tabs.
4. Remove the old vent by releasing its retaining clips and slide out the damaged insert if necessary.
5. Fit the new vent assembly into place, aligning all tabs, and press firmly until clips engage.
6. Reinstall the trim bezel and verify smooth slider operation and correct airflow direction.

Typical replacement time for an experienced technician is short—generally 15–30 minutes for the center vent only, depending on dashboard trim removal complexity.

Installation Recommendations

• Use plastic trim tools to prevent scratches to the dash and vent surfaces.
• Inspect and, if needed, replace any broken retaining clips to ensure a secure fit.
• Lubricate slider contact points with a light silicone spray if the movement feels stiff, avoiding petroleum-based lubricants.
• Check surrounding seals and ducting for dust or debris that could obstruct airflow before final assembly.
• Handle the chrome slider with care to avoid fingerprints or scratches; clean with a microfiber cloth.

Why The Part Most Often Fails

• Plastic Fatigue And Broken Clips: Repeated adjustments and aging can make mounting clips brittle, causing the vent to loosen or fall out.
• Wear Of Slider Mechanism: Daily use and accumulated dust can wear the slider or cause it to jam.
• UV Exposure And Heat: Long-term sun exposure accelerates plastic degradation and color fading, especially on dashboards in sunny climates.
• Impact Or Force: Accidental knocks or forceful removal of trim pieces can crack the vent housing or deform tabs.

Compatibility And Notes

Fits Peugeot 407 center dashboard applications that accept OE part number 9644589777 and are finished in color code HXN (Black Pearl). Many customers search by the OE number when ordering—using 9644589777 will help locate the correct item quickly. The part is a direct exterior/interior trim replacement and does not contain electrical components.

This dashboard ashtray is a direct-fit replacement for Peugeot 407 interiors and is commonly searched by part number 8231NW. Designed for professional workshops and DIY mechanics who need a reliable, OEM-style interior part, it restores the original finish of the dash opening and keeps the cabin tidy. The Black Pearlescent finish (HXN-) matches factory trim tones used in many Peugeot 407 builds.

Key Benefits

– Direct fit to factory dash aperture for easy replacement and clean appearance.
– Factory color match HXN- (Black Pearlescent) for consistent interior aesthetics.
– Simple installation lowers workshop labour time compared to custom repairs.
– Useful spare for refurbishing used vehicles or replacing damaged interior fittings.

Technical Information

• Manufacturer: Stellantis (Peugeot)
• Model: Peugeot 407
• Product Codes: 8231NW NFP
• Additional Numbers: Color Code HXN-

Fitment And Compatibility

Intended For Peugeot 407 models (Sedan, Estate/Sw, Coupe) using the standard dashboard ashtray opening. Frequently looked up by the part number 8231NW, this unit replaces worn, cracked or discolored ashtrays fitted to first-generation 407 interiors.

Installation Recommendations

Recommended For Professional Mechanics And Experienced DIYers. Typical replacement steps:

• Open ashtray and remove any liner or insert.
• Use a plastic trim tool to gently release the surrounding trim clips to avoid damage to the dash finish.
• Unclip the ashtray housing from the dash. If equipped, detach any illumination connector carefully.
• Clean the mounting aperture of debris and ash before fitting the new unit.
• Fit the new ashtray by pushing it into the aperture until all clips engage; reconnect any electrical connector and test illumination (if present).
• Reinstall trim pieces and verify smooth operation of the ashtray lid and any release mechanism.

Use plastic-compatible grease on hinge points if needed to improve smoothness and prevent squeaks. Avoid excessive force on clips; broken clips are the most common fitment damage during installation.

Most Common Reasons For Failure

• Mechanical Wear: Repeated opening and closing causes hinge fatigue and eventual breakage of plastic hinge pins.
• Impact Or Misuse: Forceful closing, slamming, or hitting with objects can crack the lid or housing.
• UV And Ageing: Prolonged sun exposure can make the plastic brittle and discolored over many years.
• Accumulated Dirt And Ash: Built-up debris can jam the mechanism or scratch internal surfaces, leading to poor operation.
• Damaged Clips: During removal, brittle clips can snap, preventing secure refit without replacing the unit.

Replacing the ashtray is a fast, cost-effective way to refresh the interior look of a Peugeot 407 and restore proper function. Search by part number 8231NW to find the correct replacement for your vehicle.

This passenger-side dashboard airbag is intended as a direct replacement for the factory-fitted unit in Peugeot 407 models. It is a safety-critical component designed to deploy in the event of a frontal collision to reduce injury to the front-seat passenger. Customers and workshop professionals commonly search for this part by OE numbers 9644588880 and 8216CK—use these codes to confirm fitment with the vehicle’s original equipment references.

Technical Information

• Manufacturer: Peugeot (Stellantis)
• Model: Peugeot 407
• Product Codes: 9644588880, 8216CK
• Additional Numbers: NFP

Compatibility: Fits Peugeot 407 range (saloon, estate/SW, coupe) where the vehicle’s original part numbers match the codes listed above. Always verify the OE numbers recorded for the vehicle before ordering to ensure correct application.

Installation Recommendations

• Work Only With The Battery Disconnected: Disconnect the negative battery terminal and wait at least 10–15 minutes to allow the SRS system capacitors to discharge before starting work.
• Follow Proper Disassembly Sequence: Remove the glovebox or lower dash trim as required to access the airbag module. Keep trim and fasteners organized for reassembly.
• Handle With Care: Avoid dropping or striking the airbag module. Do not expose connectors to moisture or contaminants during installation.
• Disconnect Electrical Connectors Safely: Release locking tabs gently and avoid pulling on wiring. Inspect connectors and wiring for corrosion or damage and repair if necessary.
• Tightening And Orientation: Fit the module so it sits flush in the dash and secure fasteners to the manufacturer’s torque specifications. If torque values are not known, consult official service literature for the exact figures.
• System Check After Installation: Reconnect the battery and use a diagnostic scanner to run the SRS system check and clear any stored fault codes. Confirm that the airbag warning lamp extinguishes after the system self-test.
• Professional Equipment Recommended: While an experienced DIYer can replace an airbag with the correct precautions, a calibrated diagnostic tool and access to manufacturer service information significantly reduce the risk of incorrect installation.

Why This Part Most Commonly Fails

• Deployment In A Collision: The most common reason for replacement is deployment after a crash; deployed airbags must be replaced.
• Electrical Problems: Corroded or damaged connectors and wiring faults in the SRS circuit can trigger faults or prevent proper deployment.
• Water Ingress: Leaks that allow moisture into the dash area can corrode connectors or damage the module.
• Age And Environmental Stress: Long-term exposure to heat, humidity or contaminants can degrade components, leading to malfunction or warning lights.
• Previous Repairs Or Tampering: Improper removal or prior repairs that disturbed wiring or connectors may cause intermittent faults.

Note: Airbags are safety-critical components. Replace the unit when deployment has occurred or when SRS diagnostics indicate a confirmed fault. Use OE part numbers 9644588880 and 8216CK to ensure correct fitment for Peugeot 407 applications.

Upgrade or replace the worn interior storage lid with this original-fit glove box lid designed for Peugeot 407. Supplied in Mistral Black finish (Color Code HZD), this cover restores the dashboard appearance and ensures smooth opening and secure closure. Frequently sought by mechanics and DIY enthusiasts by the product code 8226J0, this part fits directly into the original mounting points and matches the factory look and feel.

Technical Information

• Manufacturer: Stellantis (Peugeot/Citroën)
• Model: Peugeot 407
• Product Codes: 8226J0
• Additional Numbers: Color Code HZD (Mistral Black)

Recommendations For Installation

Intended for experienced mechanics and competent DIYers. Basic tools required: trim pry tool, screwdriver set (Philips or Torx depending on vehicle trim), and a small ratchet if necessary. Recommended steps:

• Open the glove box and remove any contents. Support the lid to prevent sudden drops.
• Remove visible screws and unclip retaining fasteners of the glove box liner. Use a trim tool to avoid damaging surrounding trim.
• If fitted, carefully detach the damper or stop mechanism from the lid—note its orientation for reassembly.
• Unclip the hinge points and lift the old lid free. Replace with the new lid, engaging hinges and clips fully.
• Reattach the damper/stop and reinstall screws, checking alignment and latch engagement. Do not overtighten plastic fasteners.
• Test the lid operation several times to ensure smooth opening, correct closing, and secure latching.

Most Common Reasons For Failure

• Broken Or Worn Plastic Hinges And Clips — The most frequent cause; plastic becomes brittle over time and under repeated stress.
• Damaged Latch Or Stop Mechanism — Wear or impact can prevent proper closure or lock engagement.
• UV And Heat Degradation — Long-term sun exposure can fade the finish and weaken plastic components.
• Physical Impact — Forceful closing or accidental knocks can crack the lid or deform mounting points.

This glove box lid is an economical way to refresh the interior of a Peugeot 407 while maintaining factory fitment and appearance. Search by part number 8226J0 to find the exact match quickly and ensure you receive the correct color and finish. Ideal for professional bodyshops, service garages, and DIY repairs where a reliable, direct-fit replacement is required.

The dashboard cover for Citroën Berlingo I and Peugeot Partner I is designed to be installed in the area of the switches on the central part of the dashboard. This is an original PSA part that ensures a clean and complete interior appearance and at the same time protects the controls against dirt and mechanical damage. Thanks to the precise shaping, it fits into place without the need for modifications and preserves the original appearance of the cabin.

This cover is especially suitable for professional car mechanics and DIYers who need to replace a damaged or missing part of the interior. Correct assembly of the cover helps to eliminate the creaking of the dashboard parts and ensures a firm seat of the switches and surrounding plastics.

Technical information:
Manufacturer: PSA Citroën Peugeot
Model: Citroën Berlingo I, Peugeot Partner I
Product codes: 96210132ZL, 8212ER
Other numbers: NFP (designation of finished production of the original part)
Location: dashboard – switch area
Color: FQP – green silver
Application: interior spare part for Citroën and Peugeot cars

Installation recommendations:
Before assembly, check the condition of the fastening points and the surrounding plastic, so that the cover can be correctly clicked or screwed, depending on the design. Remove the original cover carefully, ideally using plastic removal levers, so as not to damage the surrounding parts. Before installing the new cover, clean the dashboard surfaces of dust and dirt to prevent creaking or poor seating. Mount the cover with uniform pressure around the perimeter, without force – if it cannot be fitted, check the correct position and orientation of the part. For vehicles with fitted switches, we recommend first placing the switches in the holes in the cover and then snapping the set into the dashboard. After assembly, check the function of all switches and the tightness of the housing.

The dashboard panel around the gear lever for Peugeot 307 cars is suitable as a spare part when the original plastic frame in the interior is damaged or worn. This is an original part from the PSA CITROEN PEUGEOT concern in the HVV – gray LION design, which ensures a high-quality appearance of the central tunnel and a firm fit of the gear lever sleeve and other surrounding elements.

Intended for the used car segment, this part is ideal for auto mechanics and DIYers looking for an exact fit Peugeot 307 dashboard panel. The original codes make it easy to search by part number and compare to the existing panel in the car.

Technical information:
Manufacturer: PSA CITROEN PEUGEOT
Model: Peugeot 307 (central panel of the dashboard around the gear lever)
Product codes: 9651943877, 8211HT
Other numbers: may also appear under internal PSA catalog numbers for interior parts in HVV design – GRAY LION

Thanks to the precise shape and original attachment, the panel fits well with the surrounding parts of the interior, does not bend and holds firmly in place. It visually restores the appearance of the central part of the dashboard and is suitable for replacement after the plastic has cracked, the handles have broken off or been damaged during the dismantling of other components.

Installation recommendations:
– Before removing the old panel, disconnect the vehicle’s electrical supply if it runs near electrical installations (e.g. controls, sockets, switches).
– Disassemble the gear lever sleeve and any surrounding plastic covers according to the Peugeot 307 service procedure to avoid breaking the plastic beaks.
– Use a suitable plastic pry bar to dismantle the interior parts so as not to damage the surface of the surrounding plastics.
– Before fitting a new panel, check and clean the mating surfaces and make sure that no cables, connectors or other parts are preventing proper seating.
– Snap the panel in step by step around the entire circumference and check that all the latches hold correctly and that there are no unwanted gaps between the parts.
– After assembly, reinstall the shifter boot and other removed parts and check the operation of all controls around the panel.

Overview

This steering wheel airbag is a direct-fit replacement for Peugeot 206+ and Peugeot 207 models. Designed to restore driver protection after deployment or damage, the module matches original mounting and connector layout for quick installation. Commonly searched by part numbers such as 96857294ZD, 4112NW and 4112PK, this airbag is aimed at professional workshops and competent DIY mechanics who require an OEM-style solution.

Key Benefits

– Direct fit for quick and reliable replacement.
– Black Mistral trim color for correct interior appearance.
– Single inflator (one squib) design compatible with the vehicle’s SRS wiring harness.
– Ideal when the original driver airbag has deployed, been damaged, or shows SRS fault codes related to the steering airbag.

Technical Information

• Manufacturer: Stellantis (Peugeot)
• Model: Peugeot 206+; Peugeot 207
• Product Codes: 96857294ZD, 4112PK, 4112NW
• Additional Numbers: 4112NW, 4112PK, 96857294ZD

Installation Recommendations

Safety is essential when working with SRS components. Before starting, disconnect the negative battery terminal and wait at least 10 minutes to allow residual energy in the system to dissipate. Handle the airbag module by its housing—never place it face down or apply pressure to the cover. Ensure connectors are clean and fully engaged; secure steering wheel fasteners to the manufacturer’s torque specification. After installation, use an appropriate diagnostic tool to clear SRS fault codes and confirm correct system status.

How To Replace

1. Disconnect the negative battery terminal and wait at least 10 minutes.
2. Remove steering wheel trim panels and access screws holding the airbag module.
3. Carefully disconnect the airbag connector(s) and any grounding straps.
4. Remove the old module and fit the replacement, ensuring correct orientation and that the single inflator/connector aligns with the wiring harness.
5. Refit screws and trim, reconnect the battery, then use a diagnostic tool to clear SRS codes and verify system readiness.

Why This Part Most Commonly Fails

Driver airbags typically become non-functional after deployment in a crash. Secondary causes of failure include connector corrosion, damage to the airbag during prior repairs or steering wheel removal, and electrical issues related to the clock spring that can cause SRS fault codes. Physical abrasions, water ingress, or previous improper handling can also compromise the module’s integrity.

Notes For Buyers

Search engines and technicians often look up this component by its part numbers (96857294ZD, 4112NW, 4112PK). Replace any airbag only with a correctly specified module for the vehicle to retain full safety performance. If the vehicle presents SRS warning lights after replacement, perform a full diagnostic check and repair wiring or clock spring faults before clearing codes.