Replace the worn or damaged left dashboard air vent with this direct-fit unit designed for Citroën C4 II B7 and DS4 models. This vent grille restores correct airflow direction and appearance on the driver’s side, matching the original Black Mistral finish for a factory look. Frequently searched by part numbers, this replacement is ideal for professional workshops and DIY mechanics who need a fast, reliable interior repair.

Technical Information

• Manufacturer: Stellantis (Citroën/Peugeot)
• Model: Citroën C4 II B7; DS4
• Product Codes: 9671332377, 8247S2
• Other Numbers: 96766097ZD

Compatibility

Fits Left Side (Driver’s Side) of Citroën C4 II B7 and DS4 dashboards. Confirm the part numbers listed above when searching to ensure exact match—many buyers search using the OE codes.

Function And Typical Faults

The vent grille directs conditioned air into the cabin and provides the trim finish for the dashboard opening. Common failures are broken or weakened mounting clips, cracked plastic from impact or aging, and surface fading or discoloration due to prolonged UV exposure. Mechanical wear or repeated removal during maintenance can also cause the louvers or adjustment mechanism to become loose or noisy.

Installation Recommendations

Recommended Tools: Plastic trim removal tools, small flat screwdriver, lint-free cloth.

1. Carefully pry surrounding trim using plastic trim tools to avoid scratching the dashboard.
2. Release the retaining clips holding the vent; note clip locations to ensure correct refit.
3. Remove the old vent and compare mounting points with the new part to confirm fit.
4. Press the replacement vent into place until all clips engage; check that louvers move freely and sit flush with the dash.
5. Clean the surrounding area and reassemble trim panels.

For best results, handle clips gently and avoid excessive force. If clips are damaged, replace them before final assembly to ensure a secure fit. Work in a well-lit area and keep removed fasteners organized.

Why This Part Most Often Fails

Plastic vents are exposed to sunlight, temperature cycles and mechanical wear: over time UV radiation and heat make the plastic brittle, causing clips to snap during use or removal. Impacts, accidental kicks, or forceful removal during dashboard service are common causes of damage. Cosmetic wear such as fading or micro-scratches also prompts replacement to restore the interior appearance.

Order this left-side vent by OE code (9671332377, 8247S2, 96766097ZD) to quickly restore airflow control and dashboard appearance on Citroën C4 II B7 and DS4 vehicles. Suitable for professional fitters and experienced DIY mechanics looking for an accurate, OEM‑pattern replacement.

This genuine OEM right-hand dashboard air vent is a direct-fit replacement for Citroën C4 II (B7) and DS4 models. Supplied with original part numbers 9671332277 / 8247S1 / 96766069ZD, it restores proper airflow direction and interior appearance on the passenger side. Ideal for professional garages and DIY enthusiasts who need a reliable, cosmetically matching component to replace cracked louvers, broken adjustment tabs, or sun-faded trim.

Technical Information

• Manufacturer: Stellantis (Citroën/Peugeot)
• Model: Citroën C4 II (B7), DS4
• Product Codes: 9671332277, 8247S1, 96766069ZD
• Additional Numbers: 8247S1 | 9671332277 | 96766069ZD
• Color: HZD – Black Mistral
• Fitment Position: Right, Passenger Side

Fitment And Replacement

Replacement is straightforward for a trained technician or competent DIYer. Typical procedure:

• Remove the surrounding trim bezel or glovebox trim to access the vent assembly.
• Release the retaining clips that secure the vent to the dashboard; some models may have hidden screws—inspect carefully.
• Withdraw the vent unit and transfer any actuator rods or electrical connectors (if present) to the new vent.
• Install the new vent by aligning tabs and pushing until clips engage, then reassemble the trim.

Installation Recommendations

• Perform the replacement on a clean, well-lit workbench or in-bay area to avoid losing small clips or fasteners.
• Use trim tools to avoid scratching the dashboard; avoid excessive force when disengaging clips.
• If removal involves work near the passenger airbag, follow the vehicle manufacturer’s service instructions to prevent accidental deployment.
• Check all transferred actuator rods and connectors for proper movement after installation and before reassembling the trim.

Why This Part Commonly Fails

• Plastic Fatigue And UV Exposure: Prolonged sun exposure and heat can make plastic brittle, causing louvers or clips to crack.
• Mechanical Damage: Forceful adjustment, impact, or improper removal often breaks small retaining tabs or the vane adjustment mechanism.
• Wear And Tear: Repeated use and cleaning can lead to loosened joints and poor seal/fit, resulting in rattles or misaligned airflow.

This right-hand vent is an economical way to restore interior appearance and proper airflow control. With correct fitment to the listed models and original part numbers, it saves time on diagnostics and ensures a clean, factory-like finish for interior repairs.

This replacement central air vent grille is an OEM-compatible part designed for Citroën C4 II (B7) and DS4 models. It restores proper airflow direction from the dashboard center vents, matches the interior finish in Black Mistral (color code HZD) and fits using the original mounting points for a neat, factory-like appearance. Frequently searched by OE numbers 9676609977 and 8247EC, this part is aimed at professional technicians and experienced DIYers who require a direct-fit, reliable replacement for cracked, worn or discolored center vents.

Technical Information

• Manufacturer: Stellantis (Citroën/Peugeot)
• Model: Citroën C4 II (B7); DS4
• Product Codes: 9676609977; 8247EC
• Additional Numbers: Color Code HZD – Black Mistral

Function and Benefits

The central air vent outlet directs and shapes airflow from the HVAC unit into the passenger cabin. Properly functioning louvers allow occupants to aim and control ventilation, improving comfort and defogging efficiency. Replacing damaged or loose vents restores a consistent airflow pattern, eliminates rattles and improves the interior appearance.

Installation Recommendations

Preparation: Park the vehicle on a flat surface and work with the ignition off. Use plastic trim removal tools to avoid damaging surrounding trim. Recommended tools: trim pry set, small flat and Phillips screwdrivers, clean cloth and gloves.

Removal Steps: Carefully pry out surrounding trim panels to access the central vent assembly. Unclip the vent by releasing the retaining clips around its perimeter—apply even pressure to avoid breaking the clips. If necessary, remove any retaining screws behind the trim. Inspect the mounting clips and surrounding dash for damage.

Installation Steps: Align the new vent with the dash opening, ensuring the louvers are set to the desired neutral position. Press evenly until all clips engage with audible clicks. Reinstall any removed trim and fasteners. Verify vent operation and that there are no rattles. Typical replacement time: 15–30 minutes for experienced technicians.

Common Failure Reasons

• Thermal Aging And UV Exposure: Prolonged sun exposure causes plastics and clips to become brittle and crack.
• Mechanical Damage: Forceful handling during cleaning or accidental impacts can break louvers or mounting tabs.
• Wear And Cosmetic Degradation: Surface fading, scratches, and discoloration reduce interior aesthetics and prompt replacement.
• Improper Removal: Using metal tools or excessive leverage during removal often damages retaining clips or surrounding trim.

Why Buy This Part

This central vent grille offers direct-fit compatibility with Citroën C4 II (B7) and DS4 dashboards, matching the factory color and attachment points. It provides a quick, cost-effective way to restore interior function and appearance—ideal for workshops and DIYers who search by OE numbers 9676609977 or 8247EC to find the correct replacement.

This replacement glove box damper pulley (also referred to as glove box brake or retention pulley) is designed for the passenger-side glove compartment in Citroën C4 II (B7) and DS4 models. The part controls the opening speed and smooth operation of the glove box lid, preventing it from dropping open abruptly and protecting the trim from impact damage. Ideal for professional workshops and experienced DIY mechanics looking for a direct-fit replacement under part code 8218ZL.

Key Features And Benefits

• Direct-fit replacement for the original glove box damper assembly on compatible Citroën/DS4 vehicles.
• Restores smooth, controlled opening and closing of the passenger glove box lid.
• Durable plastic and metal construction designed to match OE mounting points and geometry.
• Simple, time-efficient replacement — reduces rattles and prevents further trim damage.
• Product code 8218ZL included for quick lookup and ordering.

How The Part Works

The damper pulley provides resistance and guides the glove box lid during opening and closing. It typically incorporates a small friction element or geared pulley that slows the lid and holds it at the correct angle when opened. When worn or damaged, the glove box can drop open suddenly, rattle, or fail to stay in the open position.

Installation Recommendations

• Recommended For: Professional mechanics and competent DIYers familiar with interior trim removal.
• Tools: Trim removal tools, Torx/screwdriver set, possible small socket set depending on vehicle trim variant.
• Procedure Overview:
  • Open the glove box and remove any contents.
  • Lower or detach the glove box stop catches to gain access to the hinge area (follow vehicle-specific removal method).
  • Using trim tools, carefully release any retaining clips and fasteners around the glove box lid and hinge area to expose the damper pulley.
  • Remove the old pulley (note orientation and any locating tabs) and fit the new unit in the same position. Ensure secure seating of clips and screws.
  • Reassemble trim and test the glove box operation several times to confirm correct damping and alignment.
• Time Estimate: Typically 15–30 minutes for an experienced technician, depending on trim layout and fastener access.
• Precautions: Use plastic trim tools to avoid scratch or breakage. Keep fasteners and clips organized to ensure proper reassembly.

Common Failure Causes

• Plastic fatigue and cracking from repeated use or exposure to heat and UV over long periods.
• Wear of the friction or geared elements leading to loss of damping effect.
• Impact or forced opening causing broken mounting tabs or sheared pins.
• Accumulation of dirt or debris in the hinge area causing uneven movement or increased wear.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Citroën C4 II (B7), DS4
• Product Codes: 8218ZL
• Additional Numbers: None Known

This glove box damper pulley is an efficient, low-cost repair that restores proper glove compartment function and prevents further damage to interior trim. Use the product code 8218ZL when searching or ordering to ensure correct fitment for Citroën C4 II (B7) and DS4 applications.

Direct-fit center armrest designed for Citroën C4 II (B7) and DS4 models, finished in Black Mistral (Color Code HZD). This replacement armrest restores driving comfort and interior aesthetics while matching the original cabin look. Ideal for professional garages and DIY mechanics searching by part numbers 96755551ZD or 7591TJ.

Product Overview

The armrest provides a comfortable support point for the driver and front passenger and includes an integrated storage compartment for small items. Built to match the factory dimensions and attachment points, it offers a straightforward swap that maintains original ergonomics and interior alignment. The Black Mistral finish ensures a seamless visual fit with matching trim and seats.

Technical Information

• Manufacturer: Stellantis / Citroën / Peugeot
• Model: Citroën C4 II (B7); DS4
• Product Codes: 96755551ZD; 7591TJ
• Other Numbers: 7591TJ | 96755551ZD

Installation Recommendations

• Work On A Clean, Stable Surface: Park the vehicle on level ground and ensure good lighting.
• Remove Interior Trim Panels Carefully: Pry out surrounding trim with appropriate plastic trim tools to avoid damage to clips and panels.
• Unscrew Fasteners: Remove the fasteners securing the old armrest (keep original screws if undamaged or replace with equivalent quality hardware).
• Disconnect Any Electrical Connectors If Present: If the armrest has an integrated light or accessory, carefully unplug connectors before removal.
• Fit The New Armrest: Align the armrest on factory mounting points, insert and tighten screws evenly to secure. Avoid overtightening plastic threaded inserts to prevent cracking.
• Check Functionality: Open and close the lid, verify latch engagement and storage access. Refit trim panels and ensure no binding occurs.
• Recommended Tools: Torx/Phillips drivers, plastic trim tools, ratchet with appropriate sockets, and a torque wrench if manufacturer torque specs are available.

Most Common Cause Of Failure

Armrests typically fail due to mechanical wear and tear. Frequent causes include worn or torn upholstery, foam compression, broken hinge pins or latch mechanisms (often plastic), and damaged mounting brackets or clips from heavy use or improper removal. UV exposure and contamination can accelerate degradation of cover materials. Regular use over many years is the usual reason for replacement.

Why Choose This Part

Searching by part number? This armrest is listed under 96755551ZD and 7591TJ, making it easy to locate for repairs. It offers a practical and cost-effective way to restore cabin comfort and maintain resale value. Suitable for professional fitters and competent DIY mechanics who require a direct-fit replacement matching the original finish and mounting geometry.

This OEM-style glove box is a direct-fit interior replacement for Citroën C4 II (B7) and DS4 models. Designed for professional workshops and DIY enthusiasts, it restores original dashboard storage function and finish. Commonly searched under part number 825262, this item matches the Black Mistral interior and maintains factory mounting points for quick and accurate installation.

Technical Information

• Manufacturer: Stellantis / Citroën / Peugeot
• Model: Citroën C4 II (B7), DS4
• Product Codes: 825262
• Other Numbers: Colour Code HZD – Black Mistral

Function And Features

The glove box provides secure, accessible storage in the passenger-side dash. It includes OEM-style hinges and latch interface to keep the door aligned with the fascia and to ensure proper closing. The part is finished to match interior trims and restore factory aesthetics after damage or wear.

Compatibility And Fitment

Designed to fit Citroën C4 II (B7) and DS4 dashboards that use the Black Mistral (HZD) trim. Product number 825262 is commonly used when searching for a replacement glove compartment for these models. Always ensure the trim colour and mounting style match your vehicle’s interior for optimal fit.

How To Replace

Typical replacement steps for experienced technicians or competent DIYers:

• Empty The Glove Box And Remove Any Liners Or Trays.
• Open The Glove Box Fully And Release The Dampener Arm (If Present) From Its Clip.
• Remove Retaining Screws Or Clips From The Glove Box Door And Inner Housing Using Common Hand Tools (Screwdriver/Torx Bits As Required).
• Carefully Pull The Glove Box Assembly Out Of The Dashboard, Releasing Any Retaining Tabs.
• Install The New Glove Box By Reversing The Procedure: Engage Tabs, Secure Screws, Reattach Dampener And Check Alignment And Latch Operation.
• Test Opening And Closing Several Times To Confirm Smooth Operation And Correct Fit.

Installation Recommendation

Perform Installation In A Clean, Well-Lit Area With Appropriate Hand Tools. If The Work Involves Removing Trim Near Airbag Components Or Electrical Connectors, Follow Manufacturer Safety Procedures And Consider Isolating The Battery During The Job. Take Care Not To Damage Dashboard Fascia Clips; Replace Any Broken Clips To Ensure A Secure Fit. Estimated Replacement Time: 20–40 Minutes For A Skilled Technician.

Why The Part Most Commonly Fails

Glove Boxes Typically Fail Due To Broken Hinges Or Latch Mechanisms From Repeated Use, Excessive Load (Storing Heavy Items), Impact Damage, Or Plastic Fatigue And UV Degradation Over Time. Common Symptoms Include Loose Or Drooping Door, Difficulty Closing, Or A Latch That Won’t Engage Properly.

Search Keywords: Glove Box, Glove Compartment, Passenger Glove Box, Citroën Glove Box, 825262, Black Mistral, C4 II B7, DS4, Dashboard Storage. Replace your worn or damaged glove box with this direct-fit unit to restore interior function and appearance.