This complete glove box is a direct-fit interior replacement designed for Citroën C4 Picasso and C4 Grand Picasso models. It restores the original storage functionality and interior appearance, matching the Black Mistral (HZD) finish used in many factory trims. Ideal for professional workshops and experienced DIY mechanics looking for a reliable, OEM-style replacement. Commonly searched by part numbers 8218FH, 8218FF and 8226CY.

Key Benefits

• Direct Fit Replacement: Designed to match factory mounting points and trim lines for a clean, factory look.
• Correct Finish: Black Mistral (HZD) color to blend with original dashboard surfaces.
• Complete Assembly: Includes glove box shell and mounting interfaces required for installation.
• Suitable For Workshops And DIY: Clear fitment lines and standard fasteners make installation straightforward for trained technicians and competent hobbyists.

Technical Information

• Manufacturer: Stellantis (Citroën/Peugeot)
• Model: Citroën C4 Picasso, Citroën C4 Grand Picasso
• Product Codes: 8218FH, 8218FF, 8226CY
• Additional Numbers: 8218FF | 8218FH | 8226CY | NFP

Installation Recommendations

Remove Any Contents From The Existing Glove Box Before Starting. Basic Installation Steps:

• Open Glove Box And Locate Retaining Screws Or Clips Around The Perimeter. Remove Fasteners Carefully.
• If Present, Release The Damping Arm Or Stop Mechanism (Some Models Have A Gas Strut Or Plastic Damper).
• Disconnect Any Electrical Connectors For Glove Box Light Or Sensors Before Fully Removing The Unit.
• Remove The Old Glove Box Assembly And Transfer Any Insulation Or Brackets If Required.
• Fit The Replacement Unit Into Position, Reattach Fasteners And Reconnect Electrical Connectors.
• Check Alignment And Operation Of The Latch, Hinges And Damper; Replace Broken Clips Or Worn Screws With OEM-Style Fasteners For Secure Fitment.

Use Common Hand Tools (Screwdrivers, Torx Set, Trim Removal Tools) And Protect Trim Edges To Avoid Scratches During Removal And Installation. Follow Standard Workshop Safety Practices And Manufacturer Guidelines For Interior Repairs.

Why This Part Fails Most Often

• Hinge Or Stop Failure: Plastic Hinges And Dampers Wear Or Break Over Time, Causing Sagging Or Dropping Of The Glove Box Door.
• Broken Mounting Clips: Repeated Use Or Improper Removal Can Crack The Plastic Clips That Secure The Box To The Dashboard.
• Latch Wear Or Damage: Frequent Use Or Forceful Closing Can Damage The Latch Mechanism, Preventing The Door From Staying Closed.
• Impact Or Interior Damage: Strong Impacts Or Overloaded Storage Can Crack The Shell Or Distort Mounting Points.

This glove box restores functionality and interior appearance quickly and economically. Suitable for professional replacements in service shops as well as careful DIY fitting. Searchable by OEM codes 8218FH, 8218FF and 8226CY for fast identification in parts lists and catalogs.

Product Overview

Replacement dashboard fragrance holder designed for Citroën interior panels. This used part secures the scent cartridge or insert in the dashboard recess and directs airflow to disperse fragrance into the cabin. It is a practical, low-cost solution for restoring a missing or damaged aroma holder on Citroën C4 Grand Picasso, C3 II and C3 Picasso models. The visible chrome finish may show wear or damage due to age and use.

Benefits

• Direct fit for specified Citroën models — easy to reinstall.
• Keeps original cabin appearance when replacing a broken or lost holder.
• Cost-effective alternative to new OEM parts for workshop repairs and DIY maintenance.
• Fits standard fragrance inserts used in the original dashboard system.

Technical Information

• Manufacturer: Citroën (Stellantis)
• Model: C4 Grand Picasso; C3 II; C3 Picasso
• Product Codes: 824435; 8244E5
• Other Numbers: 824400000

Installation Recommendation

Intended for experienced technicians and competent DIYers. Typical installation is straightforward but requires care to avoid breaking the plastic clips or scratching surrounding trim:

• Use plastic trim pry tools to remove the surrounding trim or vent cover — do not use metal tools that can damage surfaces.
• Inspect the dashboard recess and clean any debris before installing the holder.
• Align the holder with the mounting slots and press firmly until the retention clips engage. Do not force if resistance is felt — check alignment.
• Test that the fragrance insert fits and that airflow disperses the scent as expected.

Keep removed clips and screws organized. If clips are broken, replace them or use appropriate retaining fasteners to ensure a secure fit.

Common Failure Reasons

The fragrance holder is primarily a cosmetic and retention part; its most common issues are mechanical or cosmetic rather than functional:

• Clip Breakage: Repeated removal and reinstallation or accidental force can snap the plastic retention clips.
• UV And Heat Degradation: Long-term sun exposure can embrittle plastic and cause chrome finish to flake or discolor.
• Impact Or Wear: Physical knocks, abrasion from cartridges, or previous improper removal can deform the part.
• Cosmetic Damage: Chrome plating wears off over time, reducing appearance quality though not necessarily affecting function.

Notes

This is a used spare part. Verify visual condition on receipt and prepare replacement clips if the original retainers are damaged. Ideal for workshops and individuals restoring interior trim or replacing a missing fragrance holder to recover original cabin functionality and appearance.

Product Overview

Durable interior glove box designed for Citroën C4 Picasso and C4 Grand Picasso models. This OEM-fit replacement part restores storage function and finish of the dashboard area. Ideal for professional workshops and experienced DIYers who want a clean, factory-look repair. Commonly searched under part number 8218FG.

Key Features

• Direct Fit For Citroën C4 Picasso And C4 Grand Picasso
• Finish: Black Mistral (HZD) To Match Original Dashboard Trim
• OEM-Compatible Design For Proper Alignment And Operation
• Includes Mounting Points For Dampers, Hinges And Lock Mechanism

Function And Application

The glove box provides a secure, accessible storage compartment within the passenger dashboard. It houses the glove compartment lid, latch, dampers (soft-close or friction), and attachment points to the dash structure. Functionally, it protects documents and small items while contributing to the vehicle’s interior appearance and ergonomics.

Replacement And Installation

Replacement requires removing the existing glove box lid and possibly the lower dash trim panels. Typical steps:

• Open glove box and remove any contents.
• Release retaining clips or remove screws securing the glove box assembly (common fasteners: Torx or Phillips screws and plastic clips).
• Disconnect any dampers, illumination lamps, or lock cables if present.
• Remove old unit, fit new glove box, reconnect dampers/lamps/cables and secure with original fasteners.
• Check alignment and latch operation. Ensure smooth opening and closing without binding.

Estimated Time: 20–60 Minutes For A Mechanic Or Experienced DIYer. Required Tools: Trim Pry Tools, Torx/Phillips Drivers, Ratchet Set.

Installation Recommendations

• Use Proper Trim Tools To Avoid Damaging Surrounding Panels.
• Keep Fasteners Organized And Reuse Original Screws Where Possible.
• Inspect Dampers, Hinge Pins And Latch Mechanism During Installation; Replace Worn Subcomponents To Prevent Premature Failure.
• After Installation, Verify That The Glove Box Locks And Opens Smoothly Under Load.

Why This Part Fails Most Often

Glove boxes commonly fail due to mechanical wear or impact. Typical causes include:

• Broken Plastic Hinges Or Mounting Clips From Repeated Use Or Forceful Closing.
• Damper Or Friction Mechanism Wear Leading To Slamming Or Dropping Lid.
• Latch Wear Or Cable Failure Preventing Secure Closure.
• Damage From Accidents Or Heavy Loads Stored Inside The Compartment.

Technical Information

• Manufacturer: Stellantis / Citroën
• Model: Citroën C4 Picasso, C4 Grand Picasso
• Product Codes: 8218FG
• Other Numbers: Stellantis Citroën Peugeot 8218FG

Notes For Professionals And DIYers

Part Is Suited For Workshop Replacement Or Confident DIY Installation. Inspect Adjacent Trim And Fasteners When Replacing The Glove Box To Ensure A Professional Finish. For Any Electrical Connections (illumination) Make Sure Connectors Are Clean And Secure.

Overview

This shift mode indicator is designed for Citroën C4 Picasso and C4 Grand Picasso first-generation vehicles equipped with a robotic/automated manual gearbox. It displays the selected gearbox mode to the driver and is intended as a direct-fit replacement for dashboard and center-console installations where the original indicator has failed or become unreadable. Common search references and part numbers include 9660065477, 4131AR and 4131NQ.

Function And Benefits

• Provides clear visual feedback of the transmission mode (e.g., P, R, N, D or manual modes) to the driver.
• Restores correct dashboard information after indicator failure, improving safety and usability during gear changes.
• Straightforward replacement for workshop technicians and experienced DIYers familiar with dashboard disassembly.
• Compatible with original wiring and connectors for easy installation when matched to the correct part number.

Technical Information

• Manufacturer: Stellantis / Citroën
• Model: Citroën C4 Picasso (First Generation), Citroën C4 Grand Picasso (First Generation)
• Product Codes: 9660065477
• Other Numbers: 4131AR, 4131NQ

Fitment And Additional Notes

Fits vehicles from the first series of C4 Picasso and C4 Grand Picasso equipped with the factory robotic/automated manual transmission where the original indicator uses the same electrical connector and mounting points. Always verify the part numbers stamped on the original indicator (9660065477 / 4131AR / 4131NQ) before ordering to ensure correct fitment.

How The Part Is Replaced

Typical replacement steps for a trained technician or experienced DIY enthusiast:

• Disconnect the negative battery terminal before starting work to avoid electrical damage.
• Remove surrounding trim panels and, if necessary, the instrument cluster or center console trim to access the indicator module.
• Unplug the electrical connector and release the retaining clips or screws holding the indicator in place.
• Install the replacement unit, secure fasteners, reconnect the electrical connector and reassemble trim panels.
• Reconnect the battery and verify correct operation of the indicator and transmission modes.

Installation Recommendations

• Always Disconnect The Battery Before Any Work On Dashboard Electronics.
• Use Trim Removal Tools To Prevent Damage To Plastic Panels And Clips.
• Inspect Connectors For Corrosion Or Bent Pins; Clean And Repair As Needed Before Installing The New Indicator.
• After Installation, Cycle Through All Transmission Modes To Confirm Accurate Display And Electrical Integrity.
• If Uncertain, Have Installation Performed By A Professional With Experience On Citroën Dashboard Electronics.

Why The Part Usually Fails

Common failure causes for shift mode indicators include moisture ingress leading to corrosion of contacts, degraded LEDs or display elements, worn internal connectors, damage during dashboard removal/reassembly, and heat-related aging of electronic components. Failure symptoms are dim or missing mode display, flickering, or intermittent operation. Addressing underlying connector or wiring issues during replacement reduces the risk of repeat failures.

Recommended For

Automechanics And Experienced DIYers Working On First-Generation Citroën C4 Picasso And C4 Grand Picasso Vehicles Who Need A Direct Replacement Indicator (Part Numbers 9660065477, 4131AR, 4131NQ).

Ordering And Reference

When searching or ordering, use the OEM part numbers 9660065477, 4131AR or 4131NQ to locate the correct shift mode indicator for the first-series C4 Picasso family. Including the vehicle model and year in search queries increases the chance of finding the exact match.

This OEM-style dashboard trim frame is designed for Citroën C4 Picasso and C4 Grand Picasso models and carries reference numbers 9681036277 and 8209J2. The part restores the original appearance of the instrument-panel area, covering mounting points and providing a finished surface around vents and controls. It is an ideal replacement for workshops and DIY mechanics looking to repair interior trim damage, reduce rattles, or upgrade a faded fascia to the correct Black Mistral finish.

Product Overview

Designed to match factory fit and finish, the trim frame fits the central dashboard area and integrates with surrounding panels and fasteners. It is primarily a cosmetic and mounting component that helps retain switches, air vents, and trim clips in correct alignment. Typical uses include replacing cracked or sun-damaged trim, securing loose fittings that cause vibration noises, and refreshing the interior look prior to resale.

Technical Information

• Manufacturer: Stellantis / Citroën / Peugeot
• Model: Citroën C4 Picasso, C4 Grand Picasso
• Product Codes: 9681036277, 8209J2
• Other Numbers: 8209J2 | 9681036277

Installation Recommendations

Removal and installation are straightforward for experienced technicians and competent DIYers. Use a set of plastic trim removal tools to avoid scratching painted surfaces. Typical steps:

• Carefully pry away adjacent trim panels and decorative covers to expose fasteners.
• Remove any screws or clips retaining the trim frame. Keep fasteners organized for reuse.
• Disconnect any electrical connectors for switches integrated into the trim before fully removing the part.
• Align the new trim, engage snap-fit clips, and replace screws. Verify even fitment and that vents and controls operate freely.

Always disconnect the battery before working near airbags or electrical components and follow manufacturer procedures to avoid damage to electrical systems or restraint devices. Replace broken clips or worn fasteners during reassembly for a secure, rattle-free installation.

Why This Part Typically Fails

Trim frames are subject to cosmetic and mechanical wear rather than functional failure. Common causes of replacement include:

• UV exposure and heat accelerating fading, discoloration, and plastic embrittlement.
• Physical damage from impacts, improper removal with metal tools, or forceful seating of items on the dash.
• Broken or fatigued snap-fit clips and mounting points causing rattles or loose fitment.
• Wear around switch openings from repeated use or installation/removal of accessories.

Practical Tips

• Inspect and, if necessary, replace any brittle clips when fitting the new trim to ensure longevity and eliminate noise.
• Store the replacement part away from direct sunlight prior to installation to prevent early fading.
• Match the color code HZD (Black Mistral) when repairing or repainting surrounding panels for a consistent finish.

This trim frame is a high-value interior part for professional garages and DIY enthusiasts who maintain Citroën C4 Picasso interiors. Use the product codes 9681036277 and 8209J2 when searching or ordering to ensure fast and precise identification.

Product Overview

This OEM-style fascia frame and storage cubby is designed to restore the dashboard appearance and functionality on Citroën C4 Picasso and C4 Grand Picasso models. It integrates the radio surround, a small storage pocket and the ventilation grille to provide a neat factory-fit finish. Ideal for mechanics and DIY enthusiasts looking to replace cracked or worn trim or to prepare the dash for a radio swap or repair.

Key Benefits

• Direct fit for original mounting points — no trimming required when compatible.
• Maintains factory look with Black Mistral finish (color code HZD).
• Restores proper alignment of radio and ventilation outlets for a professional result.
• Often searched by part numbers 96832655ZD and 8265AK for quick identification.

Compatibility

Designed for Citroën C4 Picasso and Citroën C4 Grand Picasso models that use the corresponding factory trim and radio mounting. Always confirm the part numbers listed below match the part being replaced.

Function

The frame houses and secures the in-dash radio head unit, provides a small storage compartment beneath the radio, and incorporates the ventilation grille that directs airflow from the dashboard vents. It preserves the dashboard contour and ensures the radio and vents sit squarely within the instrument panel.

How To Replace

Replacement can be completed with common workshop tools and basic trim removal skills. Typical steps:

• Remove surrounding trim panels using plastic trim tools to avoid damaging clips and finishes.
• Unscrew any fasteners securing the radio and storage cubby; carefully unclip the fascia frame.
• Disconnect any connected vent pieces or retainers as needed and withdraw the complete assembly.
• Install the new frame by aligning it with factory mounting points, secure fasteners and reassemble trim in reverse order.

Installation Recommendations

• Use plastic pry tools to release clips and reduce risk of cracking brittle tabs.
• Check and, if necessary, replace broken clips or screws during installation to ensure a tight fit.
• Verify ventilation louvers are aligned and free-moving after installation to maintain airflow performance.
• Match the color code HZD to existing interior trim to avoid noticeable mismatches.

Most Common Reasons For Failure

• Plastic Clips And Tabs Break: Repeated removal or impact commonly fractures mounting tabs, causing poor fit or rattles.
• Sun And Heat Damage: Prolonged UV exposure leads to fading, crazing or brittle plastic.
• Accidental Damage During Repairs: Rough trim removal or excessive force when removing the radio can crack the frame.
• Wear And Contamination: Spills, grease and dirt can discolor the surface and degrade vents and latches over time.

Technical Information

• Manufacturer: Stellantis (Citroën)
• Model: Citroën C4 Picasso, Citroën C4 Grand Picasso
• Product Codes: 96832655ZD, 8265AK
• Other Numbers: Color Code HZD – Black Mistral

Notes For Purchase

Customers frequently search using part numbers 96832655ZD or 8265AK. Use these identifiers to quickly locate the correct fascia for Citroën C4 Picasso and C4 Grand Picasso dashboards.