This complete glovebox assembly is a direct-fit interior replacement for the Citroën C3 Picasso. It combines OEM-style appearance with functional components: a sturdy lid, integrated hinges, and a matte chrome opening lever that matches the factory trim. Ideal for professional workshops and DIY mechanics looking for an accurate, reliable replacement identified by part numbers 98066102ZD / 8218YJ / 8218YW.

Technical Information

• Manufacturer: Stellantis (Citroën/Peugeot)
• Model: Citroën C3 Picasso
• Product Codes: 98066102ZD, 8218YJ, 8218YW
• Additional Numbers: 8218yj, 8218yw

Fitment And Function

The glovebox mounts into the passenger side of the dashboard and provides secure storage for documents and small items. The assembly includes the lid, hinge points and the opening lever in matte chrome finish. The part is intended to replace worn, cracked or damaged glovebox units and restore proper latching and visual appearance of the dashboard.

How The Part Is Replaced

• Remove Lower Trim: Carefully detach surrounding trim panels to access glovebox fasteners. Use trim tools to avoid damaging clips.
• Unscrew Fasteners: Remove securing screws or bolts holding the glovebox box and lid assembly.
• Disconnect Any Links: If equipped, detach the opening lever linkage or dampers from the glovebox.
• Swap Assembly: Replace the complete unit and secure with original fasteners. Reinstall linkage and check hinge alignment.
• Test Operation: Open and close the glovebox several times to ensure smooth action and correct latching.

Installation Recommendations

• Work In A Clean Area: Protect the dashboard surfaces and avoid introducing dirt into the glovebox mechanism.
• Use Correct Tools: Trim pry tools, appropriate screwdrivers and torque settings for screws/bolts deliver best results.
• Inspect Clips And Screws: Replace any broken plastic clips or missing fasteners to ensure a secure fit and eliminate rattles.
• Lubricate Moving Parts: Apply a light plastic-safe lubricant to hinge pins and latch contact points for smooth long-term operation.
• Check Alignment: Ensure the lid sits flush with surrounding trim to prevent wind noise and premature wear of the latch.

Most Common Reason For Failure

Glovebox damage typically results from physical impact, overloaded contents damaging hinges or latches, and material fatigue (plastic becoming brittle with age and heat exposure). The latch lever or internal clips are the most frequent failure points, leading to loose or non-latching lids and unwanted rattles.

Why Choose This Part

This glovebox assembly restores factory appearance and function with exact-fit components and genuine-style finishes. It is frequently searched by part number, making it a quick solution for workshops and self-repairers who need a dependable replacement that fits correctly and operates reliably.

Looking for a reliable and high-quality replacement part for your Citroën C3 Picasso? Our used climate control panel is an excellent choice for repairing and maintaining your vehicle. This part ensures optimal functionality of the air conditioning system and is designed for a perfect fit and operation in your car.

Technical Information:
Manufacturer: PSA Citroën Peugeot
Model: Citroën C3 Picasso
Product Codes: 96828913, 823117
Additional Numbers: Color HXU- – Brilliant Black
This climate control panel is a great addition to your vehicle’s interior, enhancing not only the aesthetic appeal but also increasing comfort while driving, especially during hot summer months.

This auto part is primarily intended for the Citroën C3 Picasso model and can be easily installed in place of the original control panel. Additionally, its Brilliant Black color contributes to a modern and clean interior look.

If you are a mechanic or prefer to perform repairs yourself, this used part should not be missing in your workshop. It offers an economical solution while maintaining the original components of your vehicle in working condition. This is an ideal option to keep your car in top shape without investing in more expensive new parts.

Add this essential auto part to your shopping cart and ensure your Citroën C3 Picasso stays perfectly cooled and ready to provide comfortable transport anywhere, even during the hottest days. Don’t wait until it’s too late—maintain your car in optimal condition with our climate control panel.

Looking for a reliable and high-quality climate control panel for your Citroën C3 Picasso? This climate control panel is an ideal choice for those who want to maintain proper functionality of the vehicle’s air conditioning system. Its elegant Black Mistral color seamlessly integrates into the car’s interior design.

Properly functioning air conditioning guarantees comfortable driving conditions regardless of external temperatures. The control panel allows easy adjustments of temperature, air flow intensity, and direction, enhancing driving comfort. Thanks to its specific design and functionality, this part helps maintain optimal cabin climate, which is especially important during extreme summer heat or cold winter conditions.

Technical Information:

Manufacturer: Citroën
Model: C3 Picasso
Product Codes: 96825462, 823115
Additional Numbers: Color HZD – Black Mistral

This climate control panel is specially designed and manufactured for the C3 Picasso model, ensuring compatibility and straightforward installation. It is a vital component for the proper operation of the air conditioning system and should always be in top condition to provide effective cooling or heating of the vehicle’s interior. The panel can be easily installed in place of the original unit, allowing both professional mechanics and DIY enthusiasts to perform a quick and efficient replacement.

Product Overview

Replacement dashboard fragrance holder designed for Citroën interior panels. This used part secures the scent cartridge or insert in the dashboard recess and directs airflow to disperse fragrance into the cabin. It is a practical, low-cost solution for restoring a missing or damaged aroma holder on Citroën C4 Grand Picasso, C3 II and C3 Picasso models. The visible chrome finish may show wear or damage due to age and use.

Benefits

• Direct fit for specified Citroën models — easy to reinstall.
• Keeps original cabin appearance when replacing a broken or lost holder.
• Cost-effective alternative to new OEM parts for workshop repairs and DIY maintenance.
• Fits standard fragrance inserts used in the original dashboard system.

Technical Information

• Manufacturer: Citroën (Stellantis)
• Model: C4 Grand Picasso; C3 II; C3 Picasso
• Product Codes: 824435; 8244E5
• Other Numbers: 824400000

Installation Recommendation

Intended for experienced technicians and competent DIYers. Typical installation is straightforward but requires care to avoid breaking the plastic clips or scratching surrounding trim:

• Use plastic trim pry tools to remove the surrounding trim or vent cover — do not use metal tools that can damage surfaces.
• Inspect the dashboard recess and clean any debris before installing the holder.
• Align the holder with the mounting slots and press firmly until the retention clips engage. Do not force if resistance is felt — check alignment.
• Test that the fragrance insert fits and that airflow disperses the scent as expected.

Keep removed clips and screws organized. If clips are broken, replace them or use appropriate retaining fasteners to ensure a secure fit.

Common Failure Reasons

The fragrance holder is primarily a cosmetic and retention part; its most common issues are mechanical or cosmetic rather than functional:

• Clip Breakage: Repeated removal and reinstallation or accidental force can snap the plastic retention clips.
• UV And Heat Degradation: Long-term sun exposure can embrittle plastic and cause chrome finish to flake or discolor.
• Impact Or Wear: Physical knocks, abrasion from cartridges, or previous improper removal can deform the part.
• Cosmetic Damage: Chrome plating wears off over time, reducing appearance quality though not necessarily affecting function.

Notes

This is a used spare part. Verify visual condition on receipt and prepare replacement clips if the original retainers are damaged. Ideal for workshops and individuals restoring interior trim or replacing a missing fragrance holder to recover original cabin functionality and appearance.

Are you looking for a high-quality replacement part for your Citroën C3 Picasso? Our complete storage compartment with lid is the perfect choice for those seeking genuine automotive parts at an affordable price. This part comes from a Citroën C3 Picasso and has been carefully disassembled and inspected to meet all quality requirements.

With its Mistral black color, the compartment perfectly fits the interior of your vehicle, adding style and practicality. Whether you are a mechanic or someone who repairs their own car, this is a great choice for you.

Technical Information:
Manufacturer: PSA Citroën Peugeot
Model: Citroën C3 Picasso
Product Codes: 98066102ZD, 8218YJ, 8218YF
Additional Numbers: Color HZD – BLACK MISTRAL

Installing this storage compartment is relatively easy and can be done by yourself with common tools. We recommend reviewing the connection points and dimensions from the old compartment before installation to ensure the new part fits correctly. Storage compartments are often used, which can lead to wear or damage to the lid – replacing it with a new complete unit can be more efficient and aesthetically pleasing.

The complete storage compartment with lid is not only a practical but also an aesthetically pleasing addition to your interior. No more damaged or non-functional parts; our offering is a guarantee of satisfaction and long-term use.