This replacement upholstery cover is designed for the centre armrest lid of first‑generation Peugeot 3008 and 5008 models. It restores factory appearance and tactile feel while protecting the underlying foam and structure from wear, stains and sunlight. Commonly searched by part numbers, this item fits vehicles that originally came with the HZE – Tramontane interior colour and is suitable for professional fitters and experienced DIY enthusiasts who want a durable, high‑quality finish.

Benefits And Use

Provides an immediate cosmetic upgrade and protection for a frequently used interior surface. The cover rebuilds the armrest surface after cosmetic damage (abrasion, rips, discoloration) and helps maintain cabin value. Designed to match the original profile and mounting points to ensure a snug fit and neat seams after installation.

How It’s Replaced

Replacement typically involves removing the armrest lid from the centre console, releasing the trim clips or fasteners holding the old upholstery, and fitting the new cover over the foam core. Steps in brief:

• Open the armrest and remove any screws or clips securing the lid to the base.
• Detach the lid from the hinge/pivot and separate the trim from the internal shell—use plastic trim tools to avoid scratching surrounding surfaces.
• Remove the old cover by undoing clips/staples or adhesive points. Inspect and, if necessary, replace or reshape the foam pad.
• Fit the new upholstery, ensuring edges and seams align with the lid profile, and secure with original clips, staples or adhesive as required.
• Reattach the lid to the hinge and check movement and fitment for binding or interference.

This job is suitable for a workshop with basic trim tools; expect 30–60 minutes for an experienced technician.

Technical Information

• Manufacturer: Stellantis / Peugeot
• Model: Peugeot 3008 I; Peugeot 5008 I
• Product Codes: 9686610877; 9676001577; 9682928577; 7591S9
• Other Numbers: 7591S9 | 9676001577 | 9682928577 | 9686610877

Installation Recommendations

Use dedicated plastic trim tools to avoid damaging surrounding trim. If adhesive is used, apply contact adhesive sparingly and allow proper curing time. Inspect the foam insert for compression or damage and replace if the padding is compromised to ensure a smooth finish. After refitting, operate the armrest through its full range to confirm there is no interference with the console or lid hinge.

Most Common Cause Of Failure

Armrest upholstery typically fails due to surface abrasion from repeated use, exposure to sunlight and body oils, seams splitting at stress points, or accidental cuts and stains. Foam collapse under the cover can accelerate visible sagging. Regular cleaning and avoiding prolonged exposure to direct sunlight will extend the service life of the cover.

Part numbers are frequently used to locate this component; if you search by the codes listed in the technical section, you will more quickly find compatible items for the Peugeot 3008 I and 5008 I.

Used center console trim designed for the gear selector area of Peugeot 3008 I and Peugeot 5008 I. This original OEM panel (interior trim) restores the factory appearance around the shifter, hides mounting points and wiring, and integrates with adjacent trim pieces. Ideal for mechanics and DIY enthusiasts looking to replace cracked, faded or damaged trim without replacing the complete console assembly. Common search terms: Peugeot 3008 gear shift console panel, Peugeot 5008 center console trim, 98071852YC, 9807185277.

Technical Information

• Manufacturer: Stellantis / Peugeot
• Model: Peugeot 3008 I, Peugeot 5008 I
• Product Codes: 98071852YC, 9807185277
• Other Numbers: OEM Interior Part For Center Console / Gear Selector Area

Fitment And Function

The panel fits the first generation Peugeot 3008 and 5008 center console around the gear lever. It functions as the decorative and protective surround for the shifter, secures adjacent trim pieces, and may house switches or trim inserts depending on the specific vehicle specification. Fitment is OEM-based — match the product codes above with the part being replaced for correct alignment and clip positions.

Installation Recommendations

• Disconnect The Battery Before Starting Work To Avoid Accidental Short Circuits When Disconnecting Any Electrical Connectors.
• Remove The Gear Knob (Follow Manufacturer Procedure For Your Variant; Some Knobs Tighten, Others Use A Retaining Clip Or Screw).
• Unscrew Any Visible Fasteners And Use Plastic Trim Tools To Carefully Release Hidden Clips To Prevent Breakage.
• Disconnect Any Electrical Connectors For Switches Or Illumination Before Fully Removing The Panel.
• Transfer Any Switches, Bezel Inserts Or Insulation Pads From The Old Panel To The Replacement If Required.
• Reassemble In Reverse Order, Check Switch Functionality And Alignment Before Final Clip Engagement.
• Use Gentle, Even Force When Engaging Clips; Damaged Clips Are A Common Cause Of Rattles And Poor Fitment.

Why This Part Commonly Fails

• Cosmetic Wear: Surface Scratches, Fading From Sunlight, And Stains From Liquids Or Chemicals.
• Mechanical Damage: Broken Mounting Tabs Or Clips During Rough Removal/Installation Or After Impact.
• Plastic Fatigue: Repeated Use, Heat Cycling And Age Can Cause Cracks Around The Shifter Opening.
• Contamination: Spilled Fluids Can Soak Into Trim Joints And Affect Appearance Or Attached Components.

Notes For Buyers

This Is A Used OEM Panel; Expect Typical Signs Of Use Such As Minor Surface Wear Or Small Clip Marks Unless Otherwise Stated In Listing Photos. Verify That The Part Codes Match Your Vehicle’s Existing Panel For Best Fitment. Suitable For Professional Workshops And Knowledgeable DIYers Comfortable With Interior Trim Removal.

This center panel with integrated air vents is a direct-fit replacement tailored for PEUGEOT 3008 I and PEUGEOT 5008 I models. Designed for professional workshops and experienced DIY mechanics, the part restores factory appearance and proper ventilation routing in the dashboard area. Ideal when original panel is cracked, faded, or the louvers and mounting tabs are damaged. Searchable by part number 823114 and compatible with Stellantis/Peugeot interior trim assemblies.

Key Benefits

• OEM-Compatible Fitment: Designed to match factory dimensions for seamless integration with the original dashboard layout.
• Restores Vent Functionality: Replaces damaged louvers and mounting points to recover correct airflow direction and cabin aesthetics.
• Workshop-Friendly: Straightforward removal and installation process suited for mechanics and competent DIYers.
• High Visual Quality: Black Cornelie finish matches original trim styling on applicable vehicles.

Installation Overview

Basic steps for replacement (general procedure for Peugeot 3008 I / 5008 I center panels):

• Disconnect negative battery terminal before starting to avoid electrical shorts and to protect electronic modules.
• Carefully remove surrounding trim bezels (radio/climate control surround) using plastic trim tools to avoid damaging clips.
• Unscrew any visible fixing screws and release hidden clips that secure the center panel to the dashboard.
• Withdraw the panel gently, detach any connected ducts or actuators, and replace with the new panel ensuring all clips engage fully.
• Reassemble trim in reverse order and verify vent operation and alignment.

Technical Information

• Manufacturer: Stellantis / Peugeot
• Model: Peugeot 3008 I, Peugeot 5008 I (First Generation)
• Product Codes: 823114
• Other Numbers: FXT – Black Cornelie

Recommended Installation

Use appropriate plastic trim removal tools to avoid breaking clips. Work on a clean, well-lit bench and keep removed fasteners organized. When refitting, press clips in firmly until they snap into place; avoid excessive force on the louvers. Reconnect battery last and check that ventilation flaps move freely and that no rattles or gaps have been introduced during installation.

Why This Part Most Often Fails

Center panels and vent assemblies usually fail for mechanical and cosmetic reasons rather than functional electronics. Typical causes include:

• Broken Mounting Tabs Or Clips: Repeated removal or impact can fracture plastic tabs, causing poor fit or looseness.
• Damaged Or Stiff Louvers: Louvers can crack or stiffen from sun exposure, dirt ingress, or physical force, reducing directional control of airflow.
• Surface Wear And Fading: Prolonged UV exposure leads to color fading or surface degradation, affecting cabin appearance.
• Accidental Impact Or Interior Repairs: Damage during dashboard repairs or collisions can crack the panel or surrounding trim.

Maintenance Tips

• Clean vents gently with a soft brush and mild cleaner to prevent debris buildup that restricts movement.
• Avoid prying on louvers with metal tools—use plastic trim tools when necessary.
• Inspect mounting clips when removing the panel and replace any brittle or broken clips to ensure secure refitment.

Part number 823114 is commonly used in searches; include it when looking for an exact match for Peugeot 3008 I and 5008 I interior repairs. This replacement panel brings back correct ventilation routing and factory appearance with a straightforward fit for workshop professionals and experienced DIYers.

Replacement storage compartment lid designed for the interior of first‑generation Peugeot 3008 and 5008 models. This cover restores the original look of the dashboard, secures small items inside the compartment and ensures smooth opening and closing. Manufactured to match the factory color code HZE (Tramontane), it is a direct‑fit interior trim part commonly searched by part numbers 9685102777 and 8218YT, making it easy to find and order for quick repairs.

Technical Information

• Manufacturer: Stellantis / Peugeot
• Model: Peugeot 3008 I (First Generation), Peugeot 5008 I (First Generation)
• Product Codes: 9685102777, 8218YT
• Other Numbers: 8218YT | 9685102777

Function

This lid covers the dashboard storage compartment, protecting contents from dust and sunlight, maintaining cabin aesthetics and providing a tidy interior finish. Proper fitment ensures the compartment closes securely and operates without rattles.

How To Replace

Removal and installation are straightforward for a mechanic or experienced DIYer. Typical steps:

• Open the storage compartment and remove any stops or stoppers that limit travel.
• Use plastic trim tools to gently release the retaining clips along the edges to avoid damaging surrounding trim.
• Disconnect any hinge pins or fasteners holding the lid; retain screws/clips for reassembly if original hardware is reusable.
• Fit the new lid by aligning hinges and pressing the clips into place until they click. Reinstall stops and check operation.
• Verify smooth opening/closing and absence of rattles. Adjust clip alignment if needed.

Installation Recommendations

• Use dedicated plastic trim removal tools to prevent scratches and broken clips.
• Inspect and, if necessary, replace broken clips or hinge pins during installation to ensure a secure fit.
• A light application of silicone grease to hinge points can improve movement and reduce wear.
• Do not force components; if the lid does not seat easily, recheck clip alignment to avoid cracking the plastic.

Why The Part Usually Fails

Common causes of failure include broken hinges or retaining clips caused by repeated use, accidental forcing or impact, and plastic embrittlement from long‑term exposure to heat and UV. Surface wear and scratches also degrade appearance over time. In vehicles that see heavy daily use, the lid may loosen or develop play after several years, making replacement the most effective remedy.

Order this exact replacement if you see the part numbers 9685102777 or 8218YT referenced for your first‑generation Peugeot 3008/5008. A correctly matched lid restores interior function and appearance quickly, getting the vehicle back to a professional standard.

Buy now to replace worn or damaged trim and keep the cabin looking and functioning like new.

This dashboard grab handle is an OEM-fit replacement designed for Peugeot 3008 and 5008 first generation models. It restores the original passenger comfort and interior appearance while matching the Tramontane (HZE) trim color. Ideal for professional workshops and DIY enthusiasts, the part is often searched by its product codes and fits directly into the factory fixing points for a clean, secure installation.

Constructed to the same shape and mounting layout as the original, this grab handle provides a sturdy handhold for the front passenger and contributes to the finished look of the dashboard area. Using the correct replacement avoids rattles and poor alignment that can occur with non-specific aftermarket parts. The piece is suited for repairs after breakage of the handle itself or failure of its plastic clips and retainers.

Compatibility / Applications

• Peugeot 3008 I (First Generation)
• Peugeot 5008 I (First Generation)
• Interior Trim Color: HZE — Tramontane

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Peugeot 3008 I, Peugeot 5008 I
• Product Codes: 9685077677, 9686614377, 823186
• Other Numbers: 823186 | 9685077677 | 9686614377

Function And Typical Faults

The grab handle serves as a fixed handhold for passengers and a trim element on the dashboard. Common failures include:

• Broken Plastic Handle Caused By Excessive Force Or Impact
• Worn Or Broken Retaining Clips Leading To Loose Fitments Or Rattles
• Surface Damage From UV Exposure Or Abrasion

Replacement Procedure

Basic replacement steps for experienced technicians and competent DIYers:

• Carefully release surrounding trim using plastic trim tools to avoid scratch damage.
• Remove the fixing screws or pop out the defective clips securing the handle (retain hardware if reusable and undamaged).
• Detach the old handle and inspect mounting points for broken anchors or debris; replace any damaged clips.
• Fit the new handle into position, align the mounting points, and secure with the original or new fasteners. Ensure the handle sits flush and check for movement or noise.
• Reinstall trim panels and verify fit and finish.

Installation Recommendations

• Use Dedicated Plastic Trim Tools To Prevent Paint And Trim Damage.
• Replace Any Damaged Clips Or Retainers To Ensure A Secure, Rattle-Free Fit.
• Avoid Excessive Torque On Fasteners; Tighten Until Secure Without Deforming Plastic.
• Inspect Adjacent Trim And Screws For Corrosion Or Wear When Replacing The Handle.

Why The Part Commonly Fails

Failures are usually mechanical: repeated stress, accidental loads (e.g., passengers using the handle to support heavy items), sun and heat degradation of plastic, or impact during an accident. Broken clips are frequently the root cause of looseness and rattles—replacing only the handle without renewing worn retainers may not eliminate noise.

Search Keywords: Peugeot 3008 grab handle, Peugeot 5008 dashboard handle, 9685077677, 9686614377, 823186, Tramontane interior handle.

Description

Replacement floor console panel surrounding the gear lever for first‑generation Peugeot 3008 and 5008. This trim piece provides the visible finish around the shift lever, secures the shift boot, and serves as the aesthetic and protective cover for mounting points on the center console. Supplied in Tramontane (HZE) color to match interior trim of original equipment.

Key Features And Benefits

• Direct fit for First Series Peugeot 3008 and 5008 models that use the referenced part numbers.
• OEM‑style finish in Tramontane (HZE) to maintain interior appearance and resale value.
• Replaces worn, cracked or discolored factory panel and broken mounting clips.
• Includes factory mounting locations for secure, vibration‑free installation.

Compatibility

Designed For: Peugeot 3008 I, Peugeot 5008 I. Often Searched By Part Numbers: 9685858777, 7591P7.

Technical Information

• Manufacturer: Stellantis (Peugeot/Citroën)
• Model: Peugeot 3008 I; Peugeot 5008 I
• Product Codes: 9685858777, 7591P7
• Additional Numbers: 7591.P7, T84, T87

Installation Recommendations

Suitable For Experienced Mechanics And Competent DIYers. Typical Replacement Steps:

1. Park Vehicle On Level Surface And Engage Parking Brake.
2. If The Panel Incorporates Electrical Switches Or Connectors, Disconnect The Battery Before Starting.
3. Remove The Gear Knob According To The Vehicle Procedure (Pull Off Or Unscrew Depending On Variant) And Retract The Shift Boot.
4. Unscrew Any Visible Fasteners And Carefully Release Trim Clips Around The Panel Using Trim Tools To Avoid Breakage.
5. Disconnect Any Electrical Connectors If Present, Then Remove The Old Panel.
6. Fit The New Panel Aligning Clips And Fasteners, Reattach Screws To The Specified Tightening Sequence, And Reconnect Electrical Plugs.
7. Refit The Shift Boot And Knob, Reconnect The Battery If Disconnected, And Verify Full Range Of Gear Movement And Proper Operation Of Any Associated Switches.

Use Plastic Trim Tools To Prevent Damage To Surrounding Surfaces. Replace Broken Clips Or Fasteners As Needed For Secure Mounting.

Why This Part Commonly Fails

• Wear And Tear: Constant contact, scuffs, and abrasion from driver use cause surface degradation and fading over time.
• Broken Mounting Clips: Clips And Tabs Become Brittle With Age Or During Previous Removals, Leading To Loose Fitment Or Rattles.
• Impact Or Forceful Removal: Improper Removal Techniques Can Crack The Panel Around Mounting Points.
• Spills And UV Exposure: Liquids, Sunlight And Heat Accelerate Discoloration And Material Deterioration.

Practical Tips

• Inspect Mounting Clips And Replace Damaged Clips During Installation To Ensure A Tight Fit.
• Keep A Small Stock Of Trim Screws And Clips If You Regularly Service These Models.
• Match The Color Code (HZE Tramontane) To Interior Trim When Ordering To Avoid Visible Mismatch.

This genuine-style floor console panel is a direct replacement for Peugeot 3008 and 5008 first generation interiors. Supplied in Color HZE (Tramontane), the panel restores factory appearance in the lower center-console area and helps maintain original fitment and finish. Often searched by part numbers 9685097277 and 7591P6, this item is aimed at professional technicians and competent DIYers performing interior repairs or refurbishments.

Key Benefits

• Direct fit for First Generation Peugeot 3008 and 5008 — no trimming or modification required when matching the correct variant.
• Factory Color HZE – Tramontane for seamless visual integration with original interior trims.
• Restores damaged or cracked console areas caused by impact, worn clips, or spills.
• Ideal for workshop replacement jobs and bodyshop refits where OEM-like appearance is required.

Applications

• Peugeot 3008 I (First Generation)
• Peugeot 5008 I (First Generation)

Technical Information

• Manufacturer: Stellantis / Peugeot
• Model: Peugeot 3008 I; Peugeot 5008 I (First Generation)
• Product Codes: 9685097277, 7591P6
• Other Numbers: T84, T87
• Color: HZE – Tramontane

Fitment And Replacement Guide

Replacement is straightforward for an experienced mechanic or a confident DIYer. Typical procedure:

• Prepare: Park on level ground and ensure good interior lighting. Gather trim tools and a basic screwdriver/Torx set.
• Remove Surrounding Trim: Carefully pry away adjacent trim pieces with a plastic trim tool to avoid scratching surfaces.
• Unscrew And Unclip: Remove visible screws or fasteners and release retaining clips. Work progressively to avoid cracking brittle clip areas.
• Detach Old Panel: Once unclipped, lift the panel clear and disconnect any plug-in elements if present (e.g., illumination modules or accessory sockets).
• Install New Panel: Align locating tabs and press until clips engage. Refit screws and surrounding trim. Verify correct seating and gap alignment.
• Check Functionality: If the panel carries any accessories (illumination, sockets), verify electrical connections before final assembly.

Estimated Fitment Time: 15–40 minutes depending on experience and model variant. Use of a plastic trim pry tool is recommended to protect visible surfaces.

Installation Recommendations

• Always work methodically and avoid excessive force when releasing plastic clips — many failures occur during removal rather than in service.
• Replace any broken or deformed clips to ensure a secure, rattle-free fit. Clip sets are inexpensive and improve long-term fitment.
• Keep fasteners organized during disassembly to ensure correct reassembly and consistent panel alignment.
• If the panel includes electrical parts, disconnect the battery before unplugging connectors only when advised by vehicle-specific procedures.

Why This Part Most Often Fails

• Impact Damage: Kicks, dropped objects, or collisions can crack the panel or break locating tabs.
• Clip And Fastener Fatigue: Repeated removal or brittle aging of plastic clips causes loose fitment and rattles.
• Liquid Spills And Corrosion: Prolonged exposure to moisture or spilled liquids can warp or stain the panel and affect any integrated trim components.
• Wear And Cosmetic Degradation: Scuffs, abrasion from shoes, and UV fading reduce visual appeal and often prompt replacement.

Search Tip: Customers frequently search by part numbers 9685097277 or 7591P6 when sourcing this console panel. Make sure the color code HZE (Tramontane) matches your vehicle’s interior for the best visual match.

Designed as a direct-fit interior trim replacement for mechanics and DIY enthusiasts, this decorative gear lever cover restores the original appearance of the center console while maintaining factory alignment and clip locations. Ideal for vehicles showing cosmetic wear, scratches or broken retaining tabs, the part is frequently searched by part numbers 9685474977 and 7591L9 — useful keywords when looking up fitment or ordering replacements.

How To Replace

• Prepare: Work on a clean, well-lit surface and collect trim removal tools (plastic pry tools), a soft cloth and, if needed, a small screwdriver for clips or retaining screws.
• Remove Shift Knob: Depending on the vehicle variant the knob may unscrew, pull off with firm upward force, or have a retaining screw. Refer to the vehicle workshop manual for the exact method for your model year.
• Unclip Cover: Use plastic trim tools to gently release the cover from its plastic clips around the gear lever area. Work evenly to avoid stressing any single clip.
• Fit New Cover: Align the replacement cover to the mounting points and press evenly until all clips engage. Reinstall the shift knob and check shift travel and positioning.
• Check: Verify that the cover does not interfere with gear selection and that all clips are secure. Replace any broken retainers if necessary.

Technical Information

• Manufacturer: Stellantis / Peugeot
• Model: Peugeot 3008 I / Peugeot 5008 I (First Generation)
• Product Codes: 9685474977, 7591L9
• Additional Numbers: 7591.L9, 7591.L9 (alternate formatting commonly used in catalogs)
• Color: HVV – Lion Grey
• Location: Center Console / Gear Lever Area (Decorative Trim)
• Material: Injection-molded interior-grade plastic (typical for OEM trim panels)

Recommended Tools And Tips For Installation

• Use soft plastic trim removal tools to avoid scratching surrounding surfaces.
• If the shift knob is threaded, mark its orientation before removal to preserve correct position on reassembly.
• Replace damaged clips or retainers rather than forcing the cover into place — broken clips are a common reason for poor fitment.
• Clean the mating surfaces before installing the new cover to ensure a snug fit and reduce rattles.

Why The Part Most Commonly Fails

• Cosmetic Wear: Daily use causes scratches, discoloration and abrasion on the visible surface.
• Broken Clips: Repeated removal or improper prying can snap plastic retaining tabs, preventing secure mounting.
• UV And Environmental Damage: Prolonged sunlight exposure and spills can fade or stain the finish.
• Accidental Impact: Heavy objects or tools dropped onto the console can crack the trim piece.

Fitment Notes

Fits First Generation Peugeot 3008 and 5008 models. For searches and ordering, use OEM part numbers 9685474977 and 7591L9. Always compare the trim color code (HVV – Lion Grey) with your vehicle interior to ensure a visual match.

Durability And Service Life

As a non-electrical, cosmetic trim part, longevity primarily depends on use and care. Under normal conditions the cover should serve for many years, but visible deterioration or broken clips are the usual triggers for replacement.

Keywords For Search

Peugeot 3008 gear lever cover, Peugeot 5008 gear trim, 9685474977, 7591L9, center console trim, Lion Grey gear cover, replacement gear lever trim.

This climate control panel is a direct-fit replacement for first-generation Peugeot 3008 and 5008 models. Ideal for professional workshops and DIY mechanics, the unit restores full control of temperature, fan speed, air distribution and auxiliary functions. Commonly searched by OE numbers 9685099877 and 823109, this part increases vehicle comfort and HVAC reliability without the need for costly diagnostics when the symptoms are clearly related to the control module.

Technical Information

• Manufacturer: Stellantis (Peugeot/Citroën)
• Model: Peugeot 3008 I; Peugeot 5008 I
• Product Codes: 9685099877, 823109
• Additional Numbers: 823109, 9685099877
• Color / Trim Code: HZE – Tramontane

Compatibility

Designed for first-generation Peugeot 3008 and 5008 vehicles. Verify fitment by matching the product code and the physical connector layout. The panel replaces the original HVAC control unit and matches the dashboard bezel and connector positions for the corresponding trim version (HZE Tramontane).

Functionality

The panel controls HVAC functions including temperature setting, fan speed, air distribution modes, air conditioning on/off, recirculation and front/rear defog. The integrated display and control switches provide user feedback and direct control of the climate system. When fully operational, the panel sends commands to the vehicle’s climate actuators, blower motor and compressors via the existing vehicle wiring and modules.

Why This Part Fails Most Often

• Wear of switches, rotary encoders or membrane contacts from frequent use.
• LCD or backlight failure leading to unreadable display.
• Moisture ingress or liquid spills causing corrosion on contacts or PCBs.
• Poor electrical contacts in multi-pin connectors, resulting in intermittent function.
• Mechanical damage from impact during dashboard removal or accidental force on knobs/buttons.

Replacement Procedure

General steps for replacing the climate control panel (procedures may vary slightly by trim):

• Disconnect the negative battery terminal before starting work to avoid short circuits and preserve vehicle electronics.
• Carefully remove surrounding trim panels and bezel using appropriate trim tools to avoid damage.
• Unscrew the mounting fasteners securing the climate control panel.
• Gently pull the unit forward and disconnect all electrical connectors and any illumination harnesses.
• Fit the replacement panel, reconnect connectors and secure with the original fasteners.
• Reinstall trim panels, reconnect the battery and test all HVAC functions: fan speeds, temperature control, A/C engagement, recirculation and display readability.

Installation Recommendations

• Always disconnect the battery before removal and follow manufacturer procedures to prevent damage to electronic components.
• Use non-marring trim tools to avoid scratching or cracking dashboard pieces.
• Inspect wiring connectors for corrosion or bent pins and clean contacts if necessary before reassembly.
• If the unit exhibits intermittent behavior after installation, recheck connector seating and ground points; poor grounding can mimic control module faults.
• Fitment is easiest when vehicle interior is warm and trim clips are more pliable; avoid forcing parts into place.

Keywords for search and identification: Peugeot 3008 climate control panel, Peugeot 5008 climate control, Peugeot 9685099877, Peugeot 823109, HVAC control panel Tramontane HZE.

Replacing the gear shift cover is straightforward and can be done by DIY enthusiasts or professional mechanics. It typically involves simply removing the old cover and snapping the new one into place, ensuring a snug fit. Regular checks on this part are recommended as it can wear out over time due to exposure to sunlight and frequent handling, which may lead to discoloration or cracking.

Technical Information

Manufacturer: PSA Citroen Peugeot
Model: Peugeot 3008 I, Peugeot 5008 I
Product Codes: 7591CY
Additional Numbers: Not specified