Overview

This gear lever surround (center console trim) is designed for Peugeot 307 models and restores the interior appearance while retaining factory fitment and alignment. The panel provides a finished look around the gearshift, secures the gear gaiter, and may incorporate mounting points for small switches or accessories depending on vehicle specification. Commonly searched under part numbers 9651943877 and 8211HT.

Technical Information

• Manufacturer: Stellantis (Citroën/Peugeot)
• Model: Peugeot 307
• Product Codes: 9651943877, 8211HT
• Other Numbers: HVV, Grey Lion Silver, NFP

Function

The panel functions as an aesthetic and protective trim around the gear lever. It secures the gear gaiter, hides mechanical linkages, reduces cabin noise from the transmission tunnel, and provides mounting for switches or trim features. Although primarily cosmetic, it contributes to a correctly assembled center console and prevents dirt ingress into the shift mechanism area.

Common Failure Modes

These panels most commonly fail due to broken mounting tabs or clips caused by improper removal or impact. Cosmetic wear such as scratches, scuffs, fading from sunlight, and abrasion around the gear lever opening are frequent, especially on higher-mileage vehicles. In used parts, light signs of usage are normal; structural damage usually appears as cracked or missing retaining tabs that produce rattles or loose fitment.

Replacement Guide

Typical steps for replacement (for experienced mechanics or competent DIYers):

• Put the vehicle in a safe state: parking brake on and ignition off.
• Remove the gear shift knob and the gaiter/boot. Some knobs unscrew, others have retaining clips—inspect before forcing.
• Remove any visible screws securing the trim (check around ashtray, cup holder or lower console area).
• Use plastic trim removal tools to gently pry up the panel from the front and sides, releasing the retaining clips without damaging surrounding surfaces.
• If the panel contains switches or illumination, carefully disconnect electrical connectors before full removal.
• Fit the replacement panel by aligning the clips and pressing evenly until fully seated; reinstall screws, gaiter and shift knob.
• Check functionality of any switches and ensure the gear lever moves freely through all gates.

Estimated time: 20–40 minutes depending on vehicle configuration and presence of electrical components.

Installation Recommendations

• Use non-marring plastic trim tools to avoid scratching nearby surfaces.
• Inspect and, if necessary, replace broken or brittle retaining clips to ensure a secure fit and eliminate rattles.
• Clean mating surfaces and remove debris before installation to ensure flush alignment.
• If the part contains electrical connectors or illumination, disconnect the battery before working on the wiring and follow standard safety procedures.
• Test all functions (shift operation, switches, illumination) after installation.

Why This Part Usually Fails

Failure is most often cosmetic or due to mechanical damage to mounting points. Repeated removal without proper tools, impact from objects in the cabin, or degradation of plastic clips over time leads to loose fitment and rattling. Sun exposure and general wear around the shift opening also accelerate visual deterioration.

This used dashboard storage compartment is a direct-fit replacement designed for Peugeot 307 interiors. Ideal for professional mechanics and competent DIY enthusiasts, the part restores lost storage functionality and improves cabin appearance without the need for major disassembly. Frequently searched by product code, this unit suits owners who need a reliable interior trim replacement that matches the factory look and color.

Technical Information

• Manufacturer: Stellantis / Peugeot
• Model: Peugeot 307
• Product Codes: 8220TZ
• Additional Numbers: NFP
• Color: FXT – Cornelie Black

Fitment And Function

The part is a dashboard storage compartment (glovebox/cubby) intended for the Peugeot 307 interior. It provides a secure, flush-mounted space for small items and documents, integrates with the dash trim and latch mechanism, and in some versions interacts with the glovebox light or damped hinge. It restores original storage capacity and improves interior finish where the original compartment is cracked, worn or missing.

Installation Recommendations

• Tools Needed: Torx and Phillips screwdrivers, trim pry tools, and a soft cloth to protect surrounding trim.
• Basic Procedure: Open the compartment, remove visible screws at the hinge or inside the box, gently pry out surrounding trim clips, disconnect any electrical connector for illumination, remove the old unit and install the replacement in reverse order.
• Adjustment: Align hinges and latch before fully tightening fasteners to ensure smooth operation without binding.
• Precautions: Protect adjacent panels with tape or cloth to avoid scratches. Do not overtighten plastic screws to prevent cracking.
• Suitability: Can be fitted by experienced DIYers. If connectors or dampers are present and difficult to access, consider workshop installation.

Why This Part Fails Most Often

• Hinge Breakage: Repeated opening/closing and impact stress commonly cause hinge or mounting tab failure.
• Latch Wear: Plastic latch components wear or snap, preventing proper closure.
• Plastic Degradation: UV exposure and age make the plastic brittle, leading to cracks.
• Physical Damage: Accidental kicks, heavy loads or collisions to the dashboard area can fracture the compartment.

Practical Tips

• Inspect Mounting Tabs: Replace broken clips or use reinforced fasteners where necessary to ensure a secure fit.
• Test Operation: After installation, cycle the lid several times and check the latch engagement and any illumination functions.
• Color Match: Verify the Cornelie Black finish against the vehicle interior before final assembly to ensure visual consistency.