Product Description

Used OEM glovebox lid designed for the passenger side of the Peugeot 206. This original-style cover preserves the factory look and texture thanks to the ‘Jeans’ fabric upholstery and paint code HCY (Jean Grey). The part is often searched by its reference numbers, so listing the correct codes below helps mechanics and DIYers find the exact replacement quickly.

Key Features And Benefits

• Original Fit: Direct replacement designed to match factory mounting points and finish.
• Factory Upholstery: ‘Jeans’ fabric cover for a consistent interior appearance.
• Cost Effective: Replace only the lid to refresh the glovebox without replacing the whole assembly.
• Stock Variants: Multiple color/finish options available to match different interior trims.

Technical Information

• Manufacturer: Peugeot (Stellantis)
• Model: Peugeot 206
• Product Codes: 96841349CY, 8218VH
• Additional Numbers: 8218.VH, 96841349 CY

Fitment

Fits Peugeot 206 models. Compatibility should be confirmed by matching the part numbers listed above (96841349CY / 8218VH). The lid is commonly used across standard 206 body styles; verify the reference to ensure exact match for trim and year.

Replacement Procedure

Typical replacement steps for a glovebox lid on Peugeot 206:

• Open Glovebox And Support: Open the glovebox and support the door to access fasteners.
• Remove Stops And Fasteners: Remove any retaining screws or plastic stops at the hinge area (retain hardware if reusing).
• Detach Damper/Cable If Present: If the glovebox has a damper or restraining cable, disconnect it carefully.
• Unclip Lid From Hinges: Gently unclip the lid from hinge pins or brackets and remove the old lid.
• Fit New Lid: Align the new lid on the hinges, refit clips/screws and reattach the damper/cable.
• Test Operation: Open and close several times to check alignment, latch engagement and damper function.

Installation Recommendations

• Use Appropriate Tools: Soft trim tools and the correct screwdrivers prevent damage to surrounding trim.
• Replace Damaged Clips: If hinge clips or stops are brittle, replace them to ensure secure mounting.
• Lubricate Moving Points: Apply light silicone spray or suitable lubricant on hinge pins for smooth operation.
• Align Before Tightening: Pre-align the lid to avoid stress on mounts; tighten fasteners only after confirming fit.
• Recommended For: Suitable for professional fitment by an auto mechanic or experienced DIYer comfortable with interior trim work.

Common Failure Reasons

Glovebox lids on Peugeot 206 commonly fail due to plastic fatigue of hinge pins and mounting clips, repeated mechanical stress from frequent use, deterioration of the damper or restraining cable, and UV/heat exposure which can make plastic parts brittle. Upholstery wear and tearing can occur over time, especially in higher-mileage vehicles or those exposed to harsh sunlight.

Final Note

This glovebox lid is frequently located by its part numbers (96841349CY, 8218VH). Replacing the lid restores interior appearance and function with minimal intervention—an economical repair for workshops and DIY enthusiasts looking to maintain the original look of the Peugeot 206.

Product Overview

Direct-replacement passenger glove box lid designed for the Peugeot 206 interior. This item restores the original appearance and functionality of the glove compartment door, including the fabric-covered finish and original mounting points. Commonly searched and ordered by part numbers 96588022ZJ and 8218CC, which makes finding the correct unit fast for workshops and DIY mechanics.

Features And Function

The glove box lid provides a clean, finished cover for the passenger storage compartment and integrates the latch and hinge mounting points. The fabric-covered surface (color code FZJ) matches the vehicle’s interior trim and helps maintain cabin aesthetics. The part includes the lid itself and the factory attachment points; internal hinges or dampers may be retained from the original assembly depending on vehicle configuration.

Fitment And Compatible Models

Fits Peugeot 206 models. Compatible with a wide range of 206 body styles (including hatchback and SW/estate variants) depending on original equipment configuration. Because the part is often identified by its product code, technicians and DIYers frequently search using 96588022ZJ or 8218CC to ensure correct fitment.

Technical Information

• Manufacturer: Stellantis / Peugeot
• Model: Peugeot 206
• Product Codes: 96588022ZJ, 8218CC
• Additional Numbers: 8218.CC, 96588022ZJ, NFP
• Color: FZJ – Grey/Orange
• Trim: Fabric upholstery

Installation Recommendations

Replacement is straightforward for experienced technicians and capable DIYers:

1. Empty the glove box and remove any internal stoppers or liners.
2. Carefully release trim clips using plastic trim tools to avoid damage to surrounding panels.
3. Unscrew the hinge fasteners (typically Phillips or Torx depending on model) and detach the old lid.
4. Transfer any reusable components (hinges, dampers, catch) if required by your vehicle’s configuration.
5. Align the new lid on the hinge pins, secure fasteners, and check operation of the latch and alignment.
6. Adjust as necessary to ensure smooth opening/closing and correct sealing.

Use appropriate trim tools to avoid breaking plastic clips. If the original hinge pins or dampers are damaged, replace them to ensure long-term function.

Why This Part Fails Most Often

Glove box lids commonly fail due to mechanical damage to hinges or plastic clips (impact or repeated force), wear of the latch mechanism, or degradation of trim materials from sun exposure and age. Overloading the glove compartment or forcing the lid when jammed accelerates wear. This is not a scheduled wear item but is prone to breakage in high-use or older vehicles.

Notes For Buyers

This part is suited for workshops and independent mechanics who need a reliable, visually matching replacement for the passenger glove compartment lid. Searching by the product codes 96588022ZJ or 8218CC will quickly locate matching units and compatible color/trim variants.

Original cover of the storage box (passenger box/compartment flap) for Peugeot 206 with upholstery in blue fabric and gray plastic. This is a used OEM PSA part, ideal as a replacement for a cracked, chipped or worn cover. Variant NFP – the original new part is no longer produced, therefore this solution is suitable for preserving the original appearance of the interior.

Main advantages
– Genuine PSA part – exact fit and correct colour/texture
– Fabric cover blue + gray plastic (HUS interior code)
– Suitable for quick and clean repair without modifications

Part numbers and search designations
– OEM: 96415289US
– PSA: 8214 SK (8214SK)
– Manufacturer Availability Status: NFP (No Further Production)
– Marking: PSA CITROEN/PEUGEOT

Technical information
– Location: dashboard, passenger compartment (lid/flap)
– Design: plastic with textile cover (blue fabric), surrounding frame/parts in gray
– Color/interior: HUS – gray + blue
– Function: closes the compartment, compatible with the original lock and hinges of the castle
– Comes as lid alone (without complete glove box, lock and damper – unless otherwise noted in photos)

Compatibility
– Peugeot 206 (various body versions such as Hatchback, SW, CC)
– Please check with part number 96415289US / 8214SK, the shape and color of your dashboard trim. For some equipment, there may be differences in attachment and decor.

Condition and quality control
– Used, original part, visually inspected before storage (mounting, hinges, upholstery)
– Expected small cosmetic traces of use corresponding to the age of the piece
– Refer to product photos for exact condition

Assembly and tips
– Replacement usually without the need for modifications; common tools (often Torx)
– Before assembly, compare the old and new part (shape of hinge, lock and color)
– Work carefully with the plastic latches, you will make it easier by heating the interior to room temperature

What will that solve?
– Broken lid hinges or latches
– Damaged or scratched upholstery
– Improper fitting of non-original replacements

Search keywords
– Peugeot 206 glove box lid, box flap 206, passenger compartment lid 206, 96415289US, 8214SK, PSA NFP, Peugeot 206 dashboard interior

If in doubt about compatibility, send the VIN or a photo of the existing part – we will verify the match by part number and design.

This replacement glove box lid is designed for Peugeot 206 interiors and offers a direct-fit option for workshops and DIY enthusiasts who demand a clean, OEM-style finish. The fabric-covered lid restores the original appearance of the passenger side storage compartment and is often searched for under part numbers 96436467LD and 8214LN. Made to match interior trim, it is ideal when the original lid shows wear, torn upholstery, broken hinges or a faulty latch. Fast identification by product code ensures quick sourcing for busy technicians and independent repairers.

Technical Information

• Manufacturer: Stellantis (Peugeot/Citroën)
• Model: Peugeot 206
• Product Codes: 96436467LD; 8214LN
• Additional Numbers: F718-; FLD-; NFP

Function And Application

The glove box lid (passenger storage compartment cover) provides a finished interior appearance and secures items stored in the glove compartment. The fabric overlay reproduces the original trim look and tactile feel. This part is intended as a direct replacement for the passenger-side glove box lid on Peugeot 206 models equipped with fabric trim in the stated color.

Replacement Procedure (Overview)

Suitable For Experienced DIYers And Professional Mechanics. Typical replacement steps:

• Empty The Glove Box And Open It Fully.
• Remove Retaining Screws Or Clips Securing The Glove Box Bin To The Dash (usually Torx Or Phillips Fasteners).
• Support The Glove Box Bin, Release The Side Stops/Dampers And Pivot The Bin Down To Access The Lid Fasteners.
• Unscrew Or Unclip The Old Lid From Its Hinges And Detach Any Latch Or Damper Components To Transfer To The New Lid If Required.
• Fit The New Lid, Reinstall Hinges, Latch And Dampers, Then Test Operation Before Reassembling The Bin Into The Dashboard.

Installation Recommendations

• Use Appropriate Trim Tools To Avoid Damaging Surrounding Panels.
• Keep All Screws, Clips And Dampers; Replace Any Broken Fasteners To Ensure Proper Fit.
• Check That The Latch Engages Smoothly And That The Lid Aligns Evenly With The Dashboard.
• If The Lid Is Covered In Fabric, Avoid Excessive Moisture Or Abrasive Cleaners During Installation.
• Follow Standard Workshop Safety: Work On A Cool Vehicle, Protect Interior Surfaces, And Keep Small Parts Organized.

Why This Part Fails Most Often

• Wear And Tear Of The Fabric Cover Leading To Fraying Or Staining From Regular Use.
• Broken Or Worn Hinges And Clips Causing The Lid To Sag Or Detach.
• Latch Mechanism Failure Resulting In Insecure Closure (Often From Plastic Clip Fatigue Or Impact).
• Sunlight And UV Exposure Causing Fade Or Brittleness Over Time.
• Impact Or Forceful Use (E.G. Slamming, Heavy Objects Stored In The Glove Box) Causing Mechanical Damage.

Fitment Notes

Designed For Peugeot 206 Passenger Side Applications. Commonly Identified By Product Codes 96436467LD And 8214LN. When Replacing, Inspect Hinges, Dampers And Latch Clips — These Items May Require Replacement To Restore Correct Operation.

Why Choose This Part

Provides An OEM-Style Appearance With Fabric Matching Options, Quick Identification By Part Number For Faster Procurement, And A Straightforward Installation Path For Technicians And Competent DIY Installers.

Ideal for replacing worn or damaged original tachometer covers, this product restores the look and protects the instrument cluster from scratches and wear. Installation is straightforward and can be performed by professional mechanics or skilled DIY enthusiasts. It fits precisely on the Peugeot 206 dashboard, ensuring a snug and secure fit without requiring modifications.

Regular wear on dashboard components such as tachometer covers usually results from prolonged exposure to sunlight and daily use. Replacing it not only improves your car’s visual appeal but also maintains original interior quality and resale value.

Technical Information

• Manufacturer: PSA Citroen Peugeot
• Model: Peugeot 206 (particularly CC and RC variants)
• Product Codes: 9640523577, 9624233277, 8209E7, 8209C0 NFP
• Additional Numbers: NFP

Choose this leather tachometer cover for a high-quality, stylish solution to protect and enhance your Peugeot 206’s dashboard, ensuring longevity and a premium finish.

This replacement glove box lid is a direct-fit interior component designed for Peugeot 206 models. It restores the original look and functionality of the passenger storage compartment and is especially useful for mechanics and DIY enthusiasts searching by part number (e.g. 96359660LD, 8214KQ). Manufactured to match factory shapes and mounting points, the unit ensures proper alignment, secure latching and consistent appearance with the vehicle’s dashboard trim. Available in the Velvet Fabric Vercors finish (Medium Sodalite Blue) and several other color options in stock.

Technical Information

• Manufacturer: Stellantis / Peugeot
• Model: Peugeot 206
• Product Codes: 96359660LD, 8214KQ, 8214.KQ
• Other Numbers: 96359660, F532, FLD, T20 / T25 (recommended fastener sizes)

Fitment And Compatibility

Designed for Peugeot 206 passenger-side dashboard assemblies. The part is commonly identified by the codes listed above; customers and workshops frequently search using those numbers to find the correct replacement. Verify that the part shape, color and mounting points match the vehicle’s existing glove box lid before installation.

Function And Typical Faults

The glove box lid provides a secure, flush cover for the passenger storage compartment and houses the latch and hinge attachments that keep the door closed and aligned. Common failure modes include cracked or snapped plastic hinges, worn or broken latch components, damaged trim clips and mechanical wear from repeated use. Exposure to heat and UV over many years can make injection-molded plastics brittle, accelerating breakage.

Replacement Procedure

• Open the glove box and remove any contents.
• Support the glove box door, then remove retaining screws and trim clips (Torx T20/T25 commonly required).
• Carefully detach the lid from hinge pins and unclip any attached dampers or stoppers.
• Transfer any hardware, dampers or liners from the old lid to the new one if required.
• Fit the new lid, secure hinge pins and fasteners, then test operation and latch engagement.
• Ensure alignment with surrounding trim and that the door closes smoothly without binding.

Installation Recommendations

• Use appropriate Torx drivers (T20/T25) and plastic trim tools to avoid damaging surrounding panels.
• Replace any broken clips or worn hinge pins rather than reusing damaged parts.
• Apply a light film of silicone grease to hinge pins and latch pivot points for smoother operation and longer life.
• Work on a clean, well-lit bench and keep fasteners organized to ensure correct reassembly.
• Follow the vehicle manufacturer’s removal and installation sequence for dashboard components to avoid disturbing airbags or adjacent systems.

Why The Part Most Commonly Fails

Failure is usually caused by mechanical wear or impact: repeated opening and closing stresses the hinge and latch points, while long-term exposure to heat and sunlight makes plastic parts brittle and prone to cracking. Accidental impacts (closed with objects inside), improper removal with prying tools, or corroded fasteners can also lead to damage.

Are you looking for quality replacement parts for your vehicle? Our used dashboard decoration is the perfect solution for PEUGEOT 206+ and 207 models. This part not only enhances the aesthetic value of your car’s interior but is also an excellent way to restore your vehicle’s original appearance at an affordable price.

With its grey color ‘HVV – GREY LION’, it perfectly complements the interior of your Peugeot, adding elegance and style. Since this is an original part with product numbers 96831399 and 824455, you can be assured that the decoration will fit perfectly and be easy to install. Additionally, our part has been inspected to ensure its functionality and aesthetic condition.

Technical Information:
Manufacturer: Peugeot
Model: PEUGEOT 206+, PEUGEOT 207
Product Codes: 96831399, 824455
Other Numbers: NFP

Our goal is to provide you with quality and reliable auto parts that meet your expectations and needs. All our parts are carefully selected and evaluated to ensure that you receive the best the used parts market can offer. Invest in a dashboard decoration for your PEUGEOT 206+ or 207 and enjoy the feeling of a restored and stylish interior in your vehicle.

Search for this part using the product numbers 96831399, 824455, or tags ‘Peugeot 206+’, ‘Peugeot 207’ in your search to ensure your vehicle shines in its full glory again. This auto part falls under the category “Interior > Dashboards and their Parts” and is your key to restoring your vehicle’s original look and functionality at an irresistible price.

Are you looking for a high-quality and reliable auto part for your Peugeot 206+? The Glove Box, product code 8218ZJ, is the perfect choice for replacing the original part or as a spare for your repair needs. This glove box, made in an attractive Mistral black color (HZD), not only looks great but is also practical for storing small items during your drive.

The glove box has been carefully dismantled from a Peugeot 206+ model and is ready for installation. It’s an excellent way to keep your car’s interior organized and tidy. With original parts from Peugeot, you can expect high quality and long-term reliability.

Technical Information

• Manufacturer: Peugeot
• Model: Peugeot 206+
• Product Codes: 8218ZJ
• Other Numbers: NFP

Installing the glove box is intuitive and can be done independently at home or by a professional. Replacing the glove box usually does not require special tools and can be completed in a short period, saving both time and installation costs.

Let your Peugeot 206+ look great and functionally equipped with this original glove box. Perfect for anyone seeking a convenient solution for their vehicle without compromising on quality and aesthetics.

Searching for quality and reliable auto parts for your Peugeot 206? The Glove Compartment, with product codes 96505445ZR and 8218QW, is an excellent solution if you are looking for a replacement for the original part. This glove compartment is ideal for those who want to keep their vehicle’s interior not only functional but also aesthetically pleasing.

Manufactured and supplied by PSA Citroen Peugeot, this glove compartment guarantees high quality and durability. The color of this compartment is black with a leatherette covering, adding a sophisticated look to your interior. It is specifically designed for the Peugeot 206 model, and its installation is quick and straightforward.

Technical Information
Manufacturer: PSA Citroen Peugeot
Model: Peugeot 206
Product Codes: 96505445ZR, 8218QW
Other Numbers: NFP

Thanks to precise processing and quality control, this glove compartment ensures high reliability and long-lasting resistance to everyday wear and tear. It is the perfect choice for anyone looking for a functional yet stylish addition to their vehicle. No special tools are required for installation, allowing you to execute the task yourself quickly and efficiently, saving both time and money on garage installations.

Enhance the functionality and aesthetic value of your Peugeot 206 with this reliable and stylish auto part. Make your vehicle feel complete again!