Product Overview

This left-hand driver armrest (part code 8830C1) is a direct-fit interior component for a range of Citroën and Peugeot vehicles. Designed to restore comfort and support for the driver, the armrest mounts to the seat frame and provides ergonomic support on longer journeys. Supplied as a used part, it may show cosmetic wear or dirt and should be cleaned before installation.

Who Should Buy

Ideal for professional mechanics and experienced DIY owners searching by part number (8830C1). A practical replacement when the original armrest is worn, broken, or cosmetically damaged but the mounting hardware remains intact.

Installation

Replacement is straightforward for a competent technician or DIYer with basic tools. Typical steps:

• Move the seat to an accessible position and remove any seat covers or trim panels obstructing the armrest mounting area.
• Locate and remove mounting screws or bolts (commonly Torx or hex fasteners) securing the armrest bracket to the seat frame.
• Detach the armrest from the bracket. Check for any retained clips or plastic guides and release them carefully to avoid breaking trim pieces.
• Fit the replacement armrest to the bracket, secure all fasteners to the correct torque, and refit trim panels.
• Verify correct movement and secure mounting. Clean the upholstery and mechanism as required.

Tools typically required: Torx and Phillips screwdrivers, small socket set, plastic trim tools, and a torque wrench for final tightening if possible.

Why This Part Fails

Armrests commonly fail due to mechanical wear and tear: padding compression, upholstery tear, broken internal brackets or hinge mechanisms, and loosening of mounting bolts. Frequent heavy use, repeated loading from elbows, and exposure to dirt or liquids accelerate degradation. Cosmetic contamination is common on used parts and usually requires cleaning or light refurbishment.

Technical Information

• Manufacturer: Citroën / Peugeot (Stellantis)
• Model: Citroën Berlingo II & III; Citroën Partner II & III; Citroën C3; Citroën Xsara Picasso; Peugeot 307; Peugeot Partner
• Product Codes: 8830C1
• Additional Numbers: NFP

Mounting Recommendations

• Inspect seat frame and mounting points for damage before installation. Replace any broken brackets or missing fasteners.
• Clean the replacement armrest thoroughly to remove dirt, grease, or residues before fitting.
• Ensure all fasteners are tightened securely; loose mounting accelerates wear and may produce rattles.
• If the armrest includes any trim clips, fit them gently to avoid breakage and check alignment with the seat upholstery.

Typical Lifespan

Lifespan depends on usage and care. With normal use an armrest can remain serviceable for many years, but visible wear or mechanical failure often appears after several years or with intensive daily use.

This used right-side front passenger armrest is a cost-effective, practical replacement for Citroën and Peugeot vehicles. Ideal for professional workshops and competent DIY mechanics, the part restores comfort and functionality to the passenger seat, improves interior appearance and fits directly to the original mounting points on compatible models. The unit may show signs of use and requires cleaning before installation. Common search key: 8830C2.

Constructed to match the original geometry and attachment points, the armrest is suitable where the original has worn, the upholstery is damaged or the hinge mechanism has become loose. Replacing the armrest is a fast repair that can significantly improve cabin comfort without the expense of full interior refurbishment. The part is a direct-fit used component; surface cleaning and minor cosmetic refurbishment are recommended prior to fitting.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model(s): Citroën Berlingo II & III, Citroën C3, Citroën Xsara Picasso, Peugeot 307, Peugeot Partner
• Product Codes: 8830C2, NFP
• Additional Numbers: 8830C2
• Fitment Position: Right front passenger seat (armrest)

Installation Recommendations

• Prepare the work area and protect surrounding trim to avoid scratches.
• Remove any trim covers or screw caps on the passenger seat to access the mounting screws or clips.
• Unscrew or unclip the original armrest from the hinge assembly; keep fasteners if undamaged or replace with matching items.
• Inspect hinge brackets and mounting points for damage or worn bushings; replace or reinforce as needed before fitting the new armrest.
• Transfer any internal components (e.g., inserts or covers) if required, then fit the replacement armrest and tighten fasteners to the manufacturer’s torque recommendations.
• Clean the part thoroughly with appropriate interior cleaners and mild detergents; avoid saturating foam padding and test cleaning products on an inconspicuous area first.
• After installation, check range of motion and secure locking/tilt functions. Ensure no interference with seat belts or airbags.

Why This Part Fails Most Often

Armrests commonly fail because of mechanical wear at the hinge and pivot points, repeated load and impact from daily use, degradation of internal foam or padding, and upholstery damage from sunlight, abrasion or spills. Hinge clips and plastic mounting lugs are frequent weak points—these can crack or strip, causing looseness or complete detachment. Liquid contamination can stain fabrics and accelerate padding breakdown, which is why cleaning and inspection are essential before refitting.

Notes For Professionals

For busy workshops, keep common fasteners and hinge clips in stock to complete the repair in one visit. When fitting a used armrest, verify the integrity of the mounting area and, if necessary, replace brittle clips or worn bolts to ensure a secure, long-lasting installation.

Product Overview

This right‑side passenger armrest (front seat) is an OEM‑style component suitable for a range of Citroën and Peugeot models. It delivers ergonomic support for the front passenger, folds away when not in use and restores interior comfort and appearance. Ideal for professional workshops and DIY mechanics looking for a direct replacement part using product code 883008. Common search terms: Citroën passenger armrest, Peugeot passenger armrest, armrest right seat 883008, Berlingo armrest, Partner armrest, Xsara Picasso armrest, 307 armrest.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Citroën Berlingo II / Berlingo III; Citroën C3; Citroën Xsara Picasso; Peugeot 307; Peugeot Partner II / Partner III
• Product Codes: 883008
• Other Numbers: –

Recommended Installation

General replacement steps for experienced technicians and competent DIYers:

• Tools Needed: Torx/Screwdriver set, trim removal tools, ratchet and socket set, torque wrench.
• Procedure: Remove the seat side trim or cover to access the armrest bracket. Unscrew the fixing bolts and carefully detach the armrest from its pivot. Transfer any required clips or spacer parts to the replacement unit if compatible. Fit the new armrest, secure bolts to manufacturer torque where specified, and reassemble trim.
• Checks After Fitting: Verify smooth pivot movement and secure fastening. Inspect surrounding upholstery and trim for correct fitment and alignment.
• Notes: Mounting hardware may vary between model years; inspect original fasteners and replace worn clips or bolts as needed.

Why This Part Typically Fails

Passenger armrests commonly show wear in high‑use vehicles. Typical failure modes include:

• Worn or torn upholstery from repeated contact and abrasion.
• Broken plastic pivot, clamps or clips due to material fatigue or impact.
• Foam compression or collapse causing loss of comfort.
• Contamination from spills and dirt leading to staining or accelerated degradation.
• Misalignment or loose fixings from improper installation or excessive loading.

Replacing the armrest restores passenger comfort and prevents progressive damage to seat trim and internal brackets. Part 883008 is a practical direct replacement for the listed Citroën and Peugeot models and is recommended when the armrest is damaged, worn or unstable.

Product Overview

This genuine used Driver’s Armrest (left seat) is a practical and comfortable replacement part for a range of Citroën and Peugeot vehicles. Built for everyday use, the armrest restores driver comfort on long drives and provides a small storage compartment on many models. Ideal for professional mechanics and DIY enthusiasts searching by part number 883007 or model fitment, this unit offers an economical way to repair worn or broken center armrest assemblies.

Fitment And Compatibility

• Fits: Citroën Berlingo (II & III), Citroën Xsara Picasso, Peugeot 307, Peugeot Partner (II & III)
• Primary Application: Driver Side (Left Seat) Armrest
• Common Search Terms: Armrest 883007, Driver Armrest Citroën, Driver Armrest Peugeot

Technical Information

• Manufacturer: Stellantis
• Model: Citroën Berlingo II/III; Citroën Xsara Picasso; Peugeot 307; Peugeot Partner II/III
• Product Codes: 883007, 883007 NFP
• Additional Numbers: Referenced Under Seller Tags: Citroën Berlingo, Citroën Xsara Picasso, Peugeot 307, Peugeot Partner

Function And Typical Failure Modes

The armrest provides ergonomic support for the driver’s forearm and often integrates a small storage bin or lid. Typical reasons for replacement include:

• Mechanical Wear: Hinge or pivot components can fracture or loosen after repeated use.
• Cosmetic Damage: Upholstery wear, tears, scratches, or compression of internal foam affecting comfort.
• Broken Mounting Points: Plastic clips or mounting brackets can crack during use or improper removal.

Replacement Procedure (Overview)

1. Prepare Tools: Trim removal tools, T20/T25 Torx or appropriate screwdrivers, and a clean workspace.
2. Remove Trim: Pry up any surrounding trim covers carefully to expose mounting screws or bolts.
3. Unscrew Fasteners: Remove screws or bolts securing the armrest base to the seat frame. Keep hardware for reuse if undamaged.
4. Detach Armrest: Disconnect any clips and lift the armrest away from the seat. Inspect for hidden fasteners or wiring (rare on basic units).
5. Install New Unit: Position replacement armrest, align mounting points, and tighten screws evenly. Refit trim and check movement and locking function.
6. Final Check: Verify smooth hinge operation and confirm there are no rattles or loose parts during normal seat movement.

Installation Recommendations

• Use Proper Trim Tools: Avoid damaging interior trims by using plastic trim removal tools rather than metal screwdrivers.
• Inspect Mounting Points: Replace any broken clips or worn screws to ensure a secure installation and eliminate rattles.
• Lubricate Moving Parts: Apply a light plastic-safe lubricant to hinge pivots if movement feels stiff.
• Clean Before Installation: Remove dust and debris from the mounting area to ensure a flush fit and prevent wear.
• Professional Fitment: If the armrest includes electrical components (e.g., lighting), follow manufacturer instructions or use a qualified workshop.

Why The Part Fails Most Often

Frequent opening/closing, heavy use, or accidental impacts are the main causes of failure. Plastic latch components and hinges are the most vulnerable items and can crack or deform over time. Upholstery and foam degrade with age, exposure to sunlight, and repeated pressure, reducing comfort and appearance.

Why Buy This Part

• Cost-Effective Replacement: Restores comfort and function without the expense of a new OEM component.
• Direct Fit: Designed for direct replacement on listed Citroën and Peugeot models, searchable by part code 883007.
• Quick Installation: Straightforward swap suitable for experienced DIYers and professional workshops.

If you are looking for a reliable driver-side armrest for Citroën or Peugeot models and frequently search by part number, this 883007 unit is a practical repair option that combines comfort, functionality, and value.

Right armrest for passenger seat, original part of the dog, ideal as a replacement for worn or damaged piece. The upholstery of Velur Pamina (HZW) in the shade of gray matinal fits with the original interior of selected models Citroën and Peugeot. Thanks to the original mounting, it fits into the sidewall of the seat without the need for modifications.

The backrest is fully functional, undamaged, only with possible minor pollution from normal use. The folding version increases the comfort of longer driving and helps maintain the ergonomic position of the hand. It is an older, no longer produced part (NFP), so the match according to the PSA 8830V5 code is essential for the correct compatibility.

Suitable for selected versions of models where this type of right armrest was mounted from production – typically Citroën C3 and other related models of the PSA concern. Before purchasing, we recommend comparing part number 8830v5, design (right side, passenger seat) and upholstery (HZW – gray matinal) with your original work.

Technical information

• Manufacturer: PSA (Citroën/Peugeot)
• Model: Citroën C3 and selected Citroën/Peugeot models according to equipment (eg C2, C3 pluriel, Berlingo/Partner II, XSara Picasso, Peugeot 307 – according to the specific interior design)
• Product codes: PSA 8830V5 (NFP)
• Other numbers: HZW (Velur Pamina Upholstery), gray matinal (color marking)

Installation tip: Installation takes place in the original bracket in the side seat of the seat. For proper function and appearance, always verify the matching and color/structure of upholstery with your seat.

Designed specifically for the driver's seat, this component adds both convenience and aesthetic value to your vehicle's interior. Over time, armrests can show signs of wear such as minor stains or scuffs; as this part is used, it may require cleaning to restore its appearance. However, its original fitment for Citroën and Peugeot vehicles guarantees proper compatibility and reliable function.

Technical Information:

Manufacturer: PSA Citroën Peugeot
Model: Citroën C3, compatible with other Citroën and Peugeot models
Product Codes: 883090 NFP
Additional Codes: F749, HZP, Meltem
Category: Interior, Armrests and Headrests
Applicable Models: Citroën C3, Citroën Berlingo II and III, Peugeot Partner II and III, Citroën Xsara Picasso

This armrest has been carefully detached and inspected to ensure optimal condition and function, essential for your satisfaction and safety. It is a cost-effective solution to maintain your vehicle's comfort and original interior quality.

Tags: Citroën C3

Take advantage of a high-quality part at a competitive price. This driver's armrest is ready for installation and will greatly enhance the comfort and style of your Citroën or Peugeot. Order now and enjoy renewed driving comfort and interior appeal.

Looking for a quality used auto part for your vehicle? This right passenger armrest is an excellent choice for anyone repairing or upgrading their Citroën or Peugeot car. Originally designed for vehicles such as the Citroën Berlingo, Xsara Picasso, and Peugeot 307, this armrest enhances both comfort and style in your car’s interior. Manufactured in a distinctive Blue Aladin color, it not only adds functionality but also an attractive look to your vehicle’s cabin.

The armrest is in used condition and may need cleaning, allowing you to customize it according to your specific requirements. Replacement is straightforward and can be done by DIY enthusiasts or a professional mechanic in an auto workshop. Upgrading your car’s interior with this armrest will boost both the aesthetic appeal and driving comfort.

Technical Information:

Manufacturer: Citroën, Peugeot
Model: Citroën Berlingo, Xsara Picasso; Peugeot 307
Product Codes: 8830H5
Additional Numbers: NFP

Enjoy increased comfort with this quality used armrest from the reputable Citroën and Peugeot brands. This part offers a unique opportunity to enhance your vehicle’s function and appearance without investing in costly new components. Equip your car for a stylish and comfortable drive.

Measuring 31 cm in length, this armrest provides added comfort for passengers, making long drives more enjoyable. The sleek Aladin blue color adds a touch of style to your vehicle’s interior, ensuring it blends seamlessly with your existing decor.

Over time, automotive armrests can wear out due to frequent use, leading to discomfort and a less appealing car interior. Regular replacement of worn or damaged armrests can maintain the comfort and aesthetic of your vehicle. Installation of the Right Armrest Citroën Peugeot 8830G2 is straightforward, allowing you to enhance your vehicle’s interior without the need for professional assistance.

Technical Information

• Manufacturer: Citroën Peugeot
• Model: Compatible with Citroën Xsara Picasso, Peugeot Partner II and III, Berlingo II and III
• Product Codes: 8830G2
• Additional Numbers: Not specified

Explore our selection of used passenger armrests specifically suited for Citroën and Peugeot vehicles. This original part, identified by product code 883088 NFP, is primarily designed for the Citroën C3 but is also compatible with various other models from Citroën and Peugeot. It is an excellent choice for those seeking a reliable replacement part for their vehicle.

The armrest features comfortable Transame fabric upholstery in the distinctive F749-HZP Meltem color, enhancing your vehicle’s interior with an elegant finish. As a used component, it may need cleaning to restore its optimal appearance. Installed mainly on the front passenger seat, this armrest ensures maximum comfort for passengers during travel.

Technical Information:

• Manufacturer: PSA Citroën Peugeot
• Model: Citroën C3 and Other Compatible Models
• Product Codes: 883088 NFP
• Additional Numbers: F749-HZP – Meltem (Color)

The armrest is an automotive component subject to normal wear and tear and is often replaced to enhance comfort or refresh the vehicle interior. This part is ideal for both professional mechanics and home enthusiasts who prefer to choose parts themselves and maintain the original look of their vehicle.

All information has been carefully verified according to the seller mechanic’s description to ensure accuracy and reliability for our customers. Invest in this component to guarantee comfort and style for both you and your passengers.

This replacement armrest mechanism is suitable for front passenger seats on a range of Citroën and Peugeot models and is frequently searched by part number 883095. Designed for fitters and DIY enthusiasts, the unit restores the adjustability and locking function of the passenger armrest, improving comfort and interior usability. Clear fitment references make it easy to find the correct part fast — ideal for workshop orders and online searches.

Technical Information

• Manufacturer: Stellantis / Citroën / Peugeot
• Model: Citroën Xsara Picasso; Citroën C3; Citroën Berlingo II and III; Peugeot Partner II and III; Peugeot 307
• Product Codes: 883095
• Other Numbers: Variant HZQ – Grey Zephyr

Function And Fitment

The mechanism provides pivot, height and locking function for the passenger armrest. It mounts directly to the seat frame or the armrest base and retains the armrest in the selected position. When operating correctly, the mechanism allows smooth adjustment and a firm lock to prevent unwanted movement while driving. This unit is intended as a direct replacement for the original mechanism specified for the listed Citroën and Peugeot models.

Installation Recommendations

Replacement requires basic workshop tools and a few general steps: remove the armrest cover or trim to access mounting screws; loosen and remove the fasteners securing the old mechanism; carefully detach the mechanism from the seat frame and disconnect any clips; install the new mechanism in the correct orientation, align holes and secure fasteners to the manufacturerʼs recommended tightness; reassemble trim and check armrest movement and locking under load. Use threadlocker on metal fasteners if previously applied and avoid overtightening plastic fixings. If unsure about access to concealed fasteners, remove the seat cushion or backrest panel following vehicle-specific guidance.

Why The Part Most Commonly Fails

• Material Fatigue: Repeated movement and load cause plastic components and small pivots to wear or crack over time.
• Mechanical Wear: Internal pawls, springs or detents can wear, causing poor locking or slippage.
• Impact Or Misuse: Excessive force or heavy loads on the armrest can deform or break the mechanism.
• Corrosion And Dirt: Accumulated dirt or corrosion on metal pivots reduces smooth movement and accelerates wear.

For professional fitters and experienced DIYers this armrest mechanism offers a straightforward repair that restores passenger comfort and prevents further interior damage caused by a loose or non-locking armrest. When ordering, using the part code 883095 in your search will speed up finding the exact unit you need.