Product Overview

This right‑side passenger armrest (front seat) is an OEM‑style component suitable for a range of Citroën and Peugeot models. It delivers ergonomic support for the front passenger, folds away when not in use and restores interior comfort and appearance. Ideal for professional workshops and DIY mechanics looking for a direct replacement part using product code 883008. Common search terms: Citroën passenger armrest, Peugeot passenger armrest, armrest right seat 883008, Berlingo armrest, Partner armrest, Xsara Picasso armrest, 307 armrest.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Citroën Berlingo II / Berlingo III; Citroën C3; Citroën Xsara Picasso; Peugeot 307; Peugeot Partner II / Partner III
• Product Codes: 883008
• Other Numbers: –

Recommended Installation

General replacement steps for experienced technicians and competent DIYers:

• Tools Needed: Torx/Screwdriver set, trim removal tools, ratchet and socket set, torque wrench.
• Procedure: Remove the seat side trim or cover to access the armrest bracket. Unscrew the fixing bolts and carefully detach the armrest from its pivot. Transfer any required clips or spacer parts to the replacement unit if compatible. Fit the new armrest, secure bolts to manufacturer torque where specified, and reassemble trim.
• Checks After Fitting: Verify smooth pivot movement and secure fastening. Inspect surrounding upholstery and trim for correct fitment and alignment.
• Notes: Mounting hardware may vary between model years; inspect original fasteners and replace worn clips or bolts as needed.

Why This Part Typically Fails

Passenger armrests commonly show wear in high‑use vehicles. Typical failure modes include:

• Worn or torn upholstery from repeated contact and abrasion.
• Broken plastic pivot, clamps or clips due to material fatigue or impact.
• Foam compression or collapse causing loss of comfort.
• Contamination from spills and dirt leading to staining or accelerated degradation.
• Misalignment or loose fixings from improper installation or excessive loading.

Replacing the armrest restores passenger comfort and prevents progressive damage to seat trim and internal brackets. Part 883008 is a practical direct replacement for the listed Citroën and Peugeot models and is recommended when the armrest is damaged, worn or unstable.

Product Overview

This genuine used Driver’s Armrest (left seat) is a practical and comfortable replacement part for a range of Citroën and Peugeot vehicles. Built for everyday use, the armrest restores driver comfort on long drives and provides a small storage compartment on many models. Ideal for professional mechanics and DIY enthusiasts searching by part number 883007 or model fitment, this unit offers an economical way to repair worn or broken center armrest assemblies.

Fitment And Compatibility

• Fits: Citroën Berlingo (II & III), Citroën Xsara Picasso, Peugeot 307, Peugeot Partner (II & III)
• Primary Application: Driver Side (Left Seat) Armrest
• Common Search Terms: Armrest 883007, Driver Armrest Citroën, Driver Armrest Peugeot

Technical Information

• Manufacturer: Stellantis
• Model: Citroën Berlingo II/III; Citroën Xsara Picasso; Peugeot 307; Peugeot Partner II/III
• Product Codes: 883007, 883007 NFP
• Additional Numbers: Referenced Under Seller Tags: Citroën Berlingo, Citroën Xsara Picasso, Peugeot 307, Peugeot Partner

Function And Typical Failure Modes

The armrest provides ergonomic support for the driver’s forearm and often integrates a small storage bin or lid. Typical reasons for replacement include:

• Mechanical Wear: Hinge or pivot components can fracture or loosen after repeated use.
• Cosmetic Damage: Upholstery wear, tears, scratches, or compression of internal foam affecting comfort.
• Broken Mounting Points: Plastic clips or mounting brackets can crack during use or improper removal.

Replacement Procedure (Overview)

1. Prepare Tools: Trim removal tools, T20/T25 Torx or appropriate screwdrivers, and a clean workspace.
2. Remove Trim: Pry up any surrounding trim covers carefully to expose mounting screws or bolts.
3. Unscrew Fasteners: Remove screws or bolts securing the armrest base to the seat frame. Keep hardware for reuse if undamaged.
4. Detach Armrest: Disconnect any clips and lift the armrest away from the seat. Inspect for hidden fasteners or wiring (rare on basic units).
5. Install New Unit: Position replacement armrest, align mounting points, and tighten screws evenly. Refit trim and check movement and locking function.
6. Final Check: Verify smooth hinge operation and confirm there are no rattles or loose parts during normal seat movement.

Installation Recommendations

• Use Proper Trim Tools: Avoid damaging interior trims by using plastic trim removal tools rather than metal screwdrivers.
• Inspect Mounting Points: Replace any broken clips or worn screws to ensure a secure installation and eliminate rattles.
• Lubricate Moving Parts: Apply a light plastic-safe lubricant to hinge pivots if movement feels stiff.
• Clean Before Installation: Remove dust and debris from the mounting area to ensure a flush fit and prevent wear.
• Professional Fitment: If the armrest includes electrical components (e.g., lighting), follow manufacturer instructions or use a qualified workshop.

Why The Part Fails Most Often

Frequent opening/closing, heavy use, or accidental impacts are the main causes of failure. Plastic latch components and hinges are the most vulnerable items and can crack or deform over time. Upholstery and foam degrade with age, exposure to sunlight, and repeated pressure, reducing comfort and appearance.

Why Buy This Part

• Cost-Effective Replacement: Restores comfort and function without the expense of a new OEM component.
• Direct Fit: Designed for direct replacement on listed Citroën and Peugeot models, searchable by part code 883007.
• Quick Installation: Straightforward swap suitable for experienced DIYers and professional workshops.

If you are looking for a reliable driver-side armrest for Citroën or Peugeot models and frequently search by part number, this 883007 unit is a practical repair option that combines comfort, functionality, and value.

This center armrest is a direct-fit interior spare part designed for Peugeot 407 models. Finished in Black Mistral with stitched imitation-leather upholstery, it restores comfort for drivers and passengers and improves the visual appearance of a worn center console. The part is commonly searched by product codes such as 7589XH, so listing the correct reference increases discoverability for mechanics and DIY enthusiasts looking for a reliable replacement.

Technical Information

• Manufacturer: Stellantis / Peugeot
• Model: Peugeot 407
• Product Codes: 7589XH, 7589E9, 7589E7
• Other Numbers: 75890000000, 7589000000000
• Color: Black Mistral (HZD)
• Material: Imitation Leather, Stitched Finish

Function And Application

The armrest provides ergonomic forearm support for driver and front passenger and often incorporates a small storage compartment for documents or small tools. It is intended as a replacement part for the center console of Peugeot 407 models and will match the original mounting points when fitted correctly. Many professionals and DIYers search by the part number when sourcing this item, so ensuring the correct code is used helps guarantee compatibility.

Installation Recommendations

1. Remove Any Items From The Console Storage And Open The Armrest Lid.
2. Carefully Pry Away Trim Panels Around The Console Using Plastic Trim Tools To Avoid Scratches.
3. Locate And Unscrew The Fixing Screws Or Bolts Securing The Armrest To The Console.
4. If Present, Disconnect Any Small Clips Or Hinges—Inspect For Broken Plastic Clips That May Need Replacement.
5. Fit The New Armrest By Aligning It With The Original Mounting Points, Then Refasten Screws To The Manufacturer’s Torque Where Possible.
6. Reinstall Trim Panels And Test The Lid Operation And Storage Closure For Proper Fitment.

Use Common Hand Tools (Torx/Screwdrivers) And Plastic Trim Tools To Protect Interior Surfaces. Typical Replacement Can Be Performed In A Workshop Or At Home By A Competent DIYer.

Common Failure Reasons

Center armrests on Peugeot 407 commonly fail due to mechanical wear of the hinge mechanism and plastic mounting clips, deterioration or tearing of the upholstery, compression of internal foam pads, and loose or missing mounting screws. Repeated loading, heavy usage, and accidental impacts accelerate wear. Replacing the worn armrest restores comfort and stops further damage to surrounding console trim.

Why Choose This Part

This armrest is an economical way to renew the interior comfort and appearance of Peugeot 407 vehicles. With compatibility to known replacement codes and a stitched imitation-leather finish in Black Mistral, it suits both workshop repairs and owner restorations where matching visual quality and fitment are important.

This left (driver-side) armrest is a practical replacement for Citroën C3 interiors finished in gray Aquilon fabric. Ideal for mechanics and DIY enthusiasts who need a direct-fit interior part, this armrest restores comfort and appearance to worn driver seats. Frequently searched under part number 883086, the unit is a used item and can show normal signs of use while the hinge remains solid—making it a cost-effective repair option for everyday vehicles.

Technical Information

• Manufacturer: Citroën / Stellantis
• Model: Citroën C3 (Driver Seat, Left)
• Product Codes: 883086
• Other Numbers: NFP (as marked)

Fitment & Notes

Designed for the driver seat of Citroën C3 models that use the gray Aquilon fabric upholstery. Because this is a used component, check visual condition and mounting points before installation. The hinge is reported as firm; surface wear on fabric and foam is possible.

Installation Recommendations

Replacement can be performed in a home garage or workshop with basic tools. Typical procedure:

• Move the seat to its most convenient position and, if needed, remove the seat from the vehicle for better access.
• Remove any trim covers or plastic caps concealing fasteners on the armrest base using a trim tool.
• Unscrew the retaining bolts (commonly Torx or socket fasteners) and carefully detach the armrest from the seat frame.
• Compare mounting points and refit the replacement armrest, ensuring the hinge aligns correctly and fasteners engage smoothly.
• Tighten fasteners to a snug fit—avoid overtightening plastic threads; use threadlocker on metal bolts if required and inspect for damaged threads or broken clips.
• Verify full range of motion and that the armrest locks/reclines as intended before concluding the job.

Recommended tools: Trim removal tool, Torx/Allen/socket set, torque driver, and a flashlight. Take care not to damage surrounding upholstery during removal.

Why This Part Commonly Fails

Armrests fail most often from mechanical wear and material fatigue. Common causes include:

• Repeated mechanical stress on the hinge and mounting points, leading to loosening or breakage of plastic brackets.
• Fabric abrasion and foam compression from prolonged use, which degrades comfort and appearance.
• UV exposure and temperature cycling that can make plastics brittle over time.
• Impact or excessive loading (e.g., leaning or placing heavy objects), which can snap internal fittings.

There is no fixed service interval; lifespan depends on usage patterns, but replacing a worn armrest is a straightforward way to restore interior ergonomics and driver comfort.

This genuine-style right-hand passenger armrest is a direct replacement designed for Citroën C3 models and is commonly searched by part number 896983. Upholstered in durable Grey AQUILON fabric, it restores comfort and appearance to the front passenger seat while matching original interior trim. Ideal for professional workshops and DIY enthusiasts who maintain or restore vehicle interiors.

The armrest provides ergonomic forearm support on longer journeys, reduces wear on seat bolsters by shifting resting pressure, and completes the cabin aesthetics. It features a foldable design mounted to the passenger seat frame—installation reuses original mounting points for a secure fit. The AQUILON fabric offers a textile surface that balances comfort and resistance to everyday abrasion.

Technical Information

• Manufacturer: Stellantis / Citroën
• Model: Citroën C3
• Product Codes: 896983, NFP
• Other Numbers: —

Installation Recommendations

• Prepare Basic Tools: Trim removal tool, screwdrivers, Torx bits, and a small socket set are usually sufficient.
• Remove Any Trim: Carefully pry off surrounding trim panels to access the armrest mounting points to avoid damaging clips.
• Unfasten Mounts: Unscrew or unclip the original fasteners securing the old armrest to the passenger seat frame. Keep original hardware if in good condition.
• Swap and Align: Position the replacement armrest on the same mounting points, align pins or brackets, then fasten firmly—do not overtighten to avoid cracking plastic components.
• Test Operation: Fold the armrest several times and check for smooth movement and secure attachment. Refit trim panels.
• Estimated Time: 20–40 minutes for a competent technician or experienced DIYer, depending on model variant and trim complexity.

Why This Part Fails Most Often

• Wear Of Fabric And Foam: Repeated use causes surface abrasion and foam compression, reducing comfort and altering appearance.
• Hinge Or Bracket Damage: Stress from folding, heavy loads, or accidental impact can break internal hinges or mounting brackets.
• Broken Clips Or Fasteners: Plastic clips and rivets become brittle with age and can fail during use or when removing panels.
• Spills And Contamination: Liquids can degrade adhesives, corrode metal components, or stain textile covers.

Part Number Search Tip: This component is frequently listed by its product code (896983). For a quick match, check the part number against the vehicle’s parts list or parts catalogue when selecting a replacement.

Part description

This right armrest is intended for the interior of the Peugeot 307 and serves as a support for the passenger seat. It is a part in a specific color design GREEN ASCOT (designation HQD-), suitable as a replacement in case of damage, wear or aesthetic deterioration of the original backrest.

When choosing, we recommend following the product number 883012 and matching design/color so that the part fits correctly in the interior in terms of appearance and attachment.

Technical information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Peugeot 307
• Other numbers: NFP, HQD-

Product codes

• Product codes: 883012

Installation recommendations

Generally/typically for interior armrest replacement, the exact procedure may vary depending on the design of the seat and the specific attachment. Below is a practical one-size-fits-all procedure.

1) Before assembly

• Compare the new part with the old part: side (right), shape, attachment, possibly covers and folding mechanism.
• Check the color and finish (ASCOT GREEN / HQD-) to match the interior.
• Inspect the backrest for cracks in the supporting part, broken handles or excessively extended joints.

2) Necessary tools and materials

• Basic set of screwdrivers / bits and ratchet (according to the type of fastening material in the car)
• Plastic removal levers (trim tools)
• Flashlight
• Cleaning agent for plastics/textiles and cloth (for cleaning contact surfaces)

3) Step-by-step assembly procedure

1. Secure the vehicle against movement and create enough space for the passenger seat.
2. Adjust the seat to a position that allows access to the armrest attachment point.
3. Carefully remove any plastic covers in the mounting area (use a plastic pry bar to avoid damaging the upholstery).
4. Undo the fasteners of the original backrest (screws/pins depending on the design).
5. Remove the old armrest and check the condition of the threads, grips and seating surfaces on the seat.
6. Clean the mating surfaces and remove any dirt that could cause play or creaking.
7. Place the new backrest in the correct position and first lightly fasten it with the fasteners.
8. Check that the backrest fits correctly and that nothing is cut when the seat moves.
9. Tighten the fasteners and replace all caps.
10. Test the full tilt/recline and verify that the mechanism holds without excessive play.

• 4) Post-assembly checks and functional test verification

  • Check the stability of the attachment (the backrest must not wobble or loosen).
  • Check that there is no abrasion anywhere on the upholstery and that the backrest does not restrict the normal control of the seat.
  • Drive the car briefly and feel for any creaking – tightening or comparing the covers/seats often helps.

  5) The most common assembly mistakes + how to avoid them

  • Swap sides (right/left): always compare the shape and orientation with the old piece.
  • Damage to covers and upholstery: use plastic pry bars and work gradually without violence.
  • Backrest not sitting in the correct position: before final tightening, straighten the backrest and try the movement several times.
  • Pulling/tearing off the attachment: tighten with sensitivity, especially for plastic parts and inserts in the upholstery.

  Reasons why the part is damaged

  • Mechanical wear of the joint and play from frequent use.
  • Cracking of grips when leaning with full weight or upon impact.
  • Damage to the surface (abrasions, flaking, penetration) due to normal operation.
  • Unprofessional disassembly/assembly leading to the caps breaking off or the attachment being deformed.
  ]]> https://www.usedpartsvendor.com/interior/armrests-and-headrests/c4-armrests-and-headrests/center-armrest-complete-citroen-c4-7589q6-7589q0-7589n9/ Wed, 07 Jan 2026 03:03:10 +0000 https://www.usedpartsvendor.com/uncategorized/center-armrest-complete-citroen-c4-7589q6-7589q0-7589n9/ Complete central armrest for CITROEN C4 cars of the first series
  Fully functional, undamaged

  Complete interior center armrest for Citroën C4 cars of the first series. This is an original PSA part designed between the front seats, which increases driving comfort and at the same time helps keep the storage area and the area around the central tunnel in order. Thanks to its precise design, it is suitable as a replacement for a damaged or worn out rest and is often searched for by the production codes listed below.

  The part is fully functional and undamaged.

  Technical information:
  Manufacturer: PSA (Citroën / Peugeot)
  Model: Citroën C4 (1st generation / first series)
  Product codes: 7589Q6, 7589Q0, 7589N9
  Other numbers: NFP

  Installation recommendations:
  – Before assembly, check the fixings in the central tunnel (threads, holders, plastic guide points) and clean them if necessary.
  – Tighten the screws carefully to avoid cracking the plastic mounts or tearing off the threads in the bodywork/plastic.
  – After installation, check that the cover/joint runs smoothly and that the support does not wobble under load; if necessary, gently lubricating the joint with a suitable plastic lubricant will help.

  The reason why the part most often goes wrong:
  Most often, the hinges and internal plastic handles wear out or crack due to frequent leaning with full weight, or the mechanism of the lid of the storage part is squeezed/broken during frequent opening.

  ]]> https://www.usedpartsvendor.com/interior/armrests-and-headrests/308-t9-armrests-and-headrests/center-armrest-peugeot-308-t9-98027606zn/ Wed, 19 Nov 2025 03:04:03 +0000 https://www.usedpartsvendor.com/uncategorized/center-armrest-peugeot-308-t9-98027606zn/ Center armrest upholstered for PEUGEOT 308 T9 cars
  Fully functional, undamaged

  Original center armrest for Peugeot 308 II (T9) – OE/PSA 98027606ZN. Used, fully functional part with no damage, ideal as a replacement for a cracked or worn armrest. Upholstered design increases comfort on long journeys and offers practical storage space within the center console.

  Key benefits
  – Original PSA part – exact compatibility and perfect fit
  – Part number (OE/PSA): 98027606ZN – often searched by this code
  – Compatible with Peugeot 308 T9 (II generation)
  – Fully functional, undamaged, normal minimal signs of use
  – Simple piece-for-piece replacement, uses the original mounts in the center tunnel

  Technical information
  – Part type: center armrest (center console)
  – Version: upholstered (variant ZN – specifies the version/shade; exact appearance according to the specific piece)
  – Features: hinged lid with storage space
  – Location: central part of the interior (between the front seats)
  – Condition: used part, fully functional, no cracks or structural damage
  – Assembly: plug & play into original mounts; mostly without the need for modifications
  – Manufacturer/concern: PSA (Peugeot)

  Compatibility
  – Peugeot 308 II (T9), approximately production years 2013–2021
  – Hatchback/SW within the T9 platform
  – Before ordering, we recommend verifying the part number against your VIN or by comparing it to the original part to match the design and color of the interior.

  What to check before buying
  – Matching OE number: 98027606ZN
  – Design/colour of the interior (ZN variant) – to match your car
  – Whether you have all the necessary screws and brackets; if they are not included, use the original ones from the car

  Why choose a used original part
  – Better compatibility and durability compared to cheap replacements
  – Preservation of the original appearance of the interior
  – Economical and ecological repair solution

  Also searched for: 308 T9 center armrest, Peugeot 308 center console armrest, Peugeot 308 T9 armrest, OEM/PSA 98027606ZN.

  Not sure about compatibility? Send us your VIN and part number and we’ll be happy to help.

  ]]> https://www.usedpartsvendor.com/interior/armrests-and-headrests/308-armrests-and-headrests/center-armrest-peugeot-308-96587010zd-7589sv/ Thu, 13 Nov 2025 03:04:04 +0000 https://www.usedpartsvendor.com/uncategorized/center-armrest-peugeot-308-96587010zd-7589sv/ Center armrest for PEUGEOT 308 vehicles. Fully functional, undamaged. Color HZD – Mistral Black.

  Product Overview

  Premium center armrest designed for Peugeot 308 interior fitment. This original-style unit offers comfortable support for driver and front passenger, integrated storage under the lid and a factory finish in Mistral Black (color code HZD). The part is fully functional and free of damage, making it a practical replacement for worn or broken armrests in workshop repairs or DIY refurbishments.

  Key Benefits

  Provides ergonomic support to reduce driver fatigue on long journeys. Restores interior aesthetics with a manufacturer-correct finish. Includes the hinge and mounting interface compatible with Peugeot 308 center console fittings. Frequently searched by product code, simplifying identification during parts lookup.

  Compatibility

  Intended For: Peugeot 308 models (OEM center armrest replacement). Often Identified By Product Codes: 96587010ZD, 7589SV. Ideal For Auto Mechanics And Enthusiast DIYers Performing Interior Repairs Or Upgrades.

  Technical Information

  • Manufacturer: Stellantis (Peugeot)
  • Model: Peugeot 308
  • Product Codes: 96587010ZD, 7589SV
  • Other Numbers: 7589SV

  Function And Typical Faults

  The center armrest Provides a comfortable resting point for the arm and Acts As A Lid For A Small Storage Compartment. Common Failures Include Upholstery Wear Or Tearing, Compression Of Foam Padding, Broken Hinges Or Mounting Brackets Due To Repeated Use, And Malfunctioning Latches. Damage Often Results From Heavy Loads Placed On The Armrest, Frequent Opening/Closing, Or Spills That Degrade Materials Over Time.

  Replacement Procedure

  Removal Typically Involves Releasing Trim Clips, Removing Fasteners That Secure The Armrest To The Console, And Lifting The Unit Out Of The Mounting Location. Reverse The Procedure For Installation, Ensuring Hinges And Mounting Points Align Correctly And That The Lid Operates Smoothly. If The Unit Includes Any Electrical Features (Illumination Or Heated Elements), Disconnect And Reconnect Connectors Carefully During Replacement.

  Installation Recommendations

  Use The Correct Hand Tools To Avoid Damaging Trim Clips And Fasteners. Inspect Mounting Points For Cracks Or Wear And Replace Any Damaged Brackets. Lightly Lubricate Hinges If Required For Smooth Operation. After Installation, Check That The Armrest Opens, Closes And Locks Securely And That The Storage Compartment Is Properly Aligned. Installation Is Straightforward For Experienced Technicians; DIYers With Basic Tools Can Complete The Swap In A Short Time.

  Why Choose This Part

  Direct-fit replacement with correct color and finish for a seamless interior repair. Frequently referenced by product numbers 96587010ZD and 7589SV, simplifying parts lookup and ordering for workshops and independent mechanics. Restores comfort and functionality without the need for upholstery rework.

  Notes

  Part Is Often Searched By Its Product Codes. Verify Fitment Against The Target Vehicle Model And Year Before Installation.

  ]]> https://www.usedpartsvendor.com/interior/armrests-and-headrests/c-crosser-armrests-and-headrests/citroen-peugeot-7589px-center-armrest/ Tue, 14 Oct 2025 02:03:03 +0000 https://www.usedpartsvendor.com/uncategorized/citroen-peugeot-7589px-center-armrest/ Central armrest for Citroen C-Crosser and Peugeot 4007
  Color 0002- – beige

  PSA 7589px center armrest for Citroën C-Crosser and Peugeot 4007 in shade 0002-beige. The original part of the interior ensures comfortable support of the hand while driving and at the same time covers the storage space of the center console. Thanks to the original design it fits exactly, holds shape and shade and does not disturb the appearance of the interior.

  Suitable for all who solve clearance, cracks or excessive creaking of the original backrest. In these models, a frequent problem is a relaxed joint or damaged plastic latches of the lid in intensive use. Replacing for the original backrest is a quick and reliable solution that will return the interior full functionality and comfort.

  Installation is usually a matter of dismantling part of the center console and allowing several screws (often torx). It is recommended to work with a clean plastic pose to avoid scratching the surrounding parts and tighten the screws evenly. Before ordering, compare the part code and the shade of upholstery/interior to match everything visually.

  technical information

  • Manufacturer: PSA (Citroën/Peugeot)
  • Model: Citroën C-Crosser; Peugeot 4007 (about 2007–2012)
  • product codes: 7589px, 7589.px
  • additional numbers: 0002 – beige (interior shade); NFP – Finished production at the manufacturer

  This original part is an ideal replacement for Citroën C-Crosser and Peugeot 4007, where the center armrest is required exactly according to the 7589px code in beige 0002. For 100% certainty of compatibility, we recommend verifying the part number according to the original backrest or VIN.

  ]]>