Complete interior center armrest for Citroën C4 cars of the first series. This is an original PSA part designed between the front seats, which increases driving comfort and at the same time helps keep the storage area and the area around the central tunnel in order. Thanks to its precise design, it is suitable as a replacement for a damaged or worn out rest and is often searched for by the production codes listed below.

The part is fully functional and undamaged.

Technical information:
Manufacturer: PSA (Citroën / Peugeot)
Model: Citroën C4 (1st generation / first series)
Product codes: 7589Q6, 7589Q0, 7589N9
Other numbers: NFP

Installation recommendations:
– Before assembly, check the fixings in the central tunnel (threads, holders, plastic guide points) and clean them if necessary.
– Tighten the screws carefully to avoid cracking the plastic mounts or tearing off the threads in the bodywork/plastic.
– After installation, check that the cover/joint runs smoothly and that the support does not wobble under load; if necessary, gently lubricating the joint with a suitable plastic lubricant will help.

The reason why the part most often goes wrong:
Most often, the hinges and internal plastic handles wear out or crack due to frequent leaning with full weight, or the mechanism of the lid of the storage part is squeezed/broken during frequent opening.

This electric driver’s seat control is a direct-fit replacement unit designed for Citroën C5 first generation vehicles equipped with power-adjustable driver seats. Ideal for professional workshops and DIY mechanics, this control panel restores seat adjustment functions such as fore/aft travel, seat height, backrest angle and other motorized movements depending on the original vehicle equipment. The part is often searched by its product codes (for example 8914AL or 6554J3), making it easy to find for repair or replacement jobs.

Benefits Of Replacing The Seat Control: Restores Full Seat Adjustability, Improves Driver Comfort And Safety, Eliminates Intermittent Or Non-Working Positioning Functions, And Prevents Further Wear On Seat Motors Caused By Faulty Switching.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Citroën C5 First Generation (C5 I) – Driver Side Electric Seat Control
• Product Codes: 8914AL, 6554J3, 8914EH, 8914EG
• Other Numbers: NFP

Compatibility And Fitment

Designed primarily for Citroën C5 first-series vehicles fitted with factory electric driver seats. Compatibility depends on the original seat equipment and connector variant; the unit typically replaces the original switch assembly in the driver seat trim. Use the product codes above when searching to confirm fitment for a specific vehicle.

How The Part Works

The control assembly sends commands to the seat motors and position sensors when a driver operates the switches. Internally it contains electrical contacts, switch mechanisms and wiring connectors that control forward/back movement, height adjustment, backrest tilt and, where fitted, lumbar adjustments. A properly functioning control ensures smooth, repeatable seat movement and correct position memory behavior if the vehicle is so equipped.

Installation Recommendations

For safe and reliable replacement follow these general steps: Disconnect The Negative Battery Terminal Before Starting, Move The Seat To An Accessible Position, Remove The Seat Trim Panels To Access The Switch Assembly, Unplug The Electrical Connector(s) And Unscrew The Fasteners Holding The Control Unit, Install The New Control Unit, Reconnect The Electrical Connector(s), Refit Trim Panels And Reconnect The Battery. Check All Seat Functions After Reinstallation. Typical Replacement Time: Approximately 30–60 Minutes For A Skilled Technician; Allow More Time For Vehicles With Additional Trim Or Airbag/Seatbelt Sensor Integration.

Why This Part Most Commonly Fails

Failures Are Usually Caused By Mechanical Wear Of Switch Contacts, Corrosion Or Oxidation Of Electrical Connectors, Moisture Ingress From Spills, Or Damage From Excessive Force. Frequent Use And High Mileage Increase Wear On Moving Contacts And Internal Potentiometers, Leading To Intermittent Operation Or Complete Loss Of Function. In Some Cases, Wiring Harness Damage Or Faulty Seat Motors Can Present Similar Symptoms—diagnose Electrical Continuity And Connector Condition Before Replacing Motors.

Notes For Mechanics And DIY Enthusiasts

When ordering, use The Product Codes Listed Above To Find The Correct Unit. Inspect Connectors For Corrosion And Ensure Pin Contacts Are Straight Before Installation. If Multiple Seat Functions Are Failing Simultaneously, Check Fuses, Ground Points And Wiring Harnesses To Rule Out External Electrical Issues. Replacing The Control Assembly Often Restores Proper Function Without The Need To Replace Higher-Cost Components.

Premium replacement electric seat control module designed for the passenger seat of the Citroën C5 first generation. This unit restores full power adjustment functions — forward/backward travel, seatback tilt and any integrated lumbar or height adjustments (depending on the seat equipment). Ideal for professional workshops and DIY mechanics who need a direct-fit part identified by common part numbers such as 8914AK and 6554J3. Clear part-number references improve findability in searches and help match the correct item quickly.

Function And Benefits

The module controls the electric actuators inside the passenger seat, converting the switch commands into motor movements. Replacing a faulty seat control returns smooth, reliable seat positioning and restores any memory or comfort features tied to the seat electronics. Typical user benefits include precise seat adjustments, improved passenger comfort and elimination of intermittent or non-responsive controls.

Technical Information

• Manufacturer: Stellantis (Citroën)
• Model: Citroën C5 First Generation
• Product Codes: 8914AK
• Other Numbers: 6554J3, 8914EH, 8914EG NFP

Compatibility And Fitment

Designed for Citroën C5 first-generation passenger seats. Use the listed product codes to confirm fitment when searching parts catalogues or listings. The unit is typically fitted on versions equipped with electric adjustment of the front passenger seat — equipment may vary by trim level and production year.

Replacement Procedure (Overview)

General replacement steps for experienced mechanics or competent DIYers:

• Disconnect the vehicle battery before starting work to prevent short circuits and preserve safety.
• Move the seat to a position that provides access to mounting bolts and connectors.
• Remove lower trim panels or seat side covers to access the switch/control module and wiring harness.
• Carefully unplug electrical connectors and detach the control module from the seat frame or trim (note connector tabs and securing clips).
• Install the replacement unit in reverse order, reconnect connectors and reattach trim. Reconnect battery and verify full function of all seat movements.

Exact removal and refitment steps can vary by submodel; always follow manufacturer service instructions where available.

Installation Recommendations

• Always disconnect the battery before disassembly and wait a few minutes to allow capacitors/vehicle systems to discharge.
• Handle connectors and PCB-mounted switches with care to avoid damage to pins and plastic clips.
• Inspect wiring harnesses and connector pins for corrosion or damage and repair any issues before final assembly.
• After installation, cycle all seat functions to confirm smooth operation and check for any fault indicators on the vehicle.
• If the seat has memory functions tied to vehicle electronics, some models may require initialization or parameter checks after replacement — perform according to factory procedure.

Why This Part Fails Most Often

Common causes of failure include worn or pitted electrical contacts inside the switch assembly, ingress of dirt or moisture leading to corrosion, mechanical wear of internal switch mechanisms from frequent use, and damaged wiring or connector problems (pin corrosion or broken wires). In some cases, actuator motors present in the seat cause symptoms that mimic a faulty control module — diagnosing connectors and motor currents helps isolate the fault.

Notes For Professionals And Enthusiasts

This part is typically sought by technicians and independent enthusiasts by part number (e.g., 8914AK, 6554J3). When replacing, verify that the seat equipment level (height adjustment, lumbar, memory) matches the replacement module’s functions to ensure full compatibility.

Looking for a reliable replacement armrest for your Citroën C5 or Peugeot vehicle? This armrest fits models Citroën C5 first and second generation, as well as Citroën C8 and Peugeot 807, providing comfort and durability at an affordable price. It is particularly designed for the driver’s seat, supporting ergonomic positioning during daily driving.

The armrest cover is crafted from durable grey velour fabric, offering both comfort and style. Despite being a used part, it retains its structural integrity and usability, making it an effective solution for interior restoration projects. We recommend cleaning the armrest thoroughly to restore its appearance and hygiene before installation.

Technical Information:

• Manufacturer: PSA Citroën Peugeot
• Models: Citroën C5 I and II, Citroën C8, Peugeot 807
• Product Codes: 8969XZ
• Additional Numbers: NFP

The driver armrest is a key comfort element during long drives, enhancing driver safety by encouraging a more ergonomic posture. Using a well-maintained armrest can reduce fatigue and improve concentration behind the wheel.

Used parts like this offer cost-effective alternatives without compromising essential quality standards. This product is suitable for automotive professionals and car owners performing self-repairs, delivering both economic and practical benefits. Restore comfort and functionality in your Citroën or Peugeot vehicle with this reliable driver armrest.

If you’re a professional mechanic or DIY enthusiast looking for a reliable replacement part, this armrest is an excellent choice. It helps maintain the original interior aesthetics of your Citroën or Peugeot vehicle without the need for costly new parts. Installation should be performed following the original vehicle manuals to ensure proper fit and secure attachment.

Technical Information:

• Manufacturer: PSA Citroën Peugeot
• Model: Citroën C5 I & II, C8; Peugeot 807
• Product Codes: 8969XY
• Additional Numbers: NFP

This armrest is an important comfort feature for vehicle passengers, supporting the arm during rides and contributing to overall interior aesthetics. Constructed to PSA Citroën Peugeot standards, it offers long-lasting durability and dependable performance. Before purchase, ensure the product code and specifications match your vehicle’s requirements.

Installing this armrest restores both function and style to your passenger seat, enhancing the overall driving experience. It is recommended to clean the armrest before installation for optimal appearance. This component balances practicality with design, making it a valuable addition to your Citroën or Peugeot vehicle interior.

Looking for a reliable and high-quality used auto part for your Citroën C5 X7? This center storage compartment is an original part that offers practical use while enhancing the interior aesthetic and functionality of your vehicle. The black HZD – Black Mistral color easily matches your car’s interior and preserves its original look.

The center storage compartment is designed specifically for the Citroën C5 X7 model, serving both practical and aesthetic purposes. It is an ideal choice for owners seeking replacement parts that precisely fit the specifications and design of their vehicle. The compartment was carefully removed from a vehicle and may exhibit typical signs of previous use, although it remains fully operational.

Technical Information:

• Manufacturer: PSA Citroën Peugeot
• Model: Citroën C5 X7
• Product Codes: 9682460077, 7589YQ, 7591GR
• Additional Numbers: NFP

Before purchase, verify the compatibility of this storage compartment with your specific vehicle model to avoid size or fitting issues. This part is especially suitable for hobbyist mechanics and professionals offering an affordable option for maintaining or restoring the interior of the Citroën C5 X7 compared to a new OEM component. Replacing this storage compartment is straightforward, appreciated by anyone with basic automotive repair knowledge.

Choose this used auto part combining quality, functionality, and aesthetic value to achieve an optimal solution for your vehicle.

With product code 883026, it is compatible with a range of models from the PSA group, ensuring an ideal fit and finish. The light grey color blends seamlessly with most interior designs, elevating the aesthetic of your vehicle.

Armrests like this one can frequently become worn or damaged due to regular use, which can compromise your driving experience. Regular inspections and timely replacements are crucial to maintain the comfort and functionality of your car’s interior.

Technical Information

• Manufacturer: PSA CITROEN PEUGEOT
• Model: C8, 807
• Product Codes: 883026
• Additional Numbers: NFP

This high-quality armrest serves a dual purpose by providing a comfortable support for the arm while also offering additional storage space for small items. It’s engineered to withstand daily wear and tear, making it a reliable addition to your vehicle’s interior.

Typically, armrests are subjected to frequent use, leading to wear and tear over time. The Right Armrest 8830R4 may require replacement due to common issues such as fading, cracking, or detachment from the seat. Regular maintenance and inspection can help prolong its lifespan.

Technical Information

• Manufacturer: Citroën Peugeot
• Model: C4, C5 I and II, C8, 807
• Product Codes: 8830R4
• Other Numbers: HZR

This model is compatible with vehicles such as Citroën C4, C5 (I and II), C8, and 807, making it a versatile choice for many drivers. Over time, armrests can wear out due to frequent use, leading to discomfort during drives. A replacement is recommended when you notice cracking, fading, or a deterioration in the material.

Installation is straightforward, allowing DIY enthusiasts and professional mechanics to replace the armrest with minimal effort. Ensure that all tools required for the installation are available beforehand for an efficient process.

Technical Information

• Manufacturer: Citroën Peugeot
• Model: 8830R7
• Product Codes: 8830R7
• Other Numbers: HZR

Crafted from high-quality velour fabric in Grey Orage (F402-FZJ), this armrest provides not only style but also comfort. It is designed for the left seating position, making it perfect for the driver’s side. While it may exhibit some signs of use, it will require cleaning to restore its original appearance.

Regular wear and tear causes armrests to degrade over time due to constant use. This replacement armrest is readily available to help maintain your vehicle’s interior aesthetics and comfort.

Technical Information

• Manufacturer: PSA Citroën Peugeot
• Model: Citroën C5 I & II, Peugeot 807
• Product Codes: 8969XZ
• Additional Numbers: N/A