original driver’s airbag to the steering wheel for the Citroën Xsara and Citroën Xsara Picasso with two -stage triggering (2 rifles). It is a module with a front cover in FXT – black cornelie, designed directly for the PSA platform, so it fits exactly in the steering wheel and uses the same connectors and attachment. With original codes 96433644ZL and 4112.FT you can easily verify the compatibility with your car.

This airbag module is suitable as a replacement after activation of the airbag, when damaged by the cover or for error messages related to the perimeter of detonators. Compared to unoriginal alternatives, it guarantees the correct stiffness of the cover, accurate landing and reliable communication with the airbags unit in the PSA on -board network.

Installation and Compatibility

Before purchase, always compare parts (96433644ZL / 4112.FT) and verify the number and type of connectors – this module has two detonators (2 connectors). Installation is usually done by releasing the two screws on the back of the steering wheel, disconnecting the connectors and removing the module; Subsequently, the new module is connected and screwed. For safety reasons, disconnect the battery before work and wait for at least 10 minutes to discharge the residual voltage. Professional assembly and diagnostic checking of error codes are recommended after replacement.

Technical information

• Manufacturer: PSA (Citroën/Peugeot)
• Model: Citroën Xsara; Citroën Xsara Picasso
• Product codes: 96433644ZL; 4112ft (4112.FT)
• Other numbers: FXT (black cornelie); NFP (no longer produced in a dog network)

How to get to know the right part: The module must have the same number of detonators (2), corresponding to the connectors and the designation by the code 96433644ZL or 4112.FT. In confusion for another version (eg one -by -one) there is a risk of incompatibility with the SRS control unit and error messages.

advantages of the original solution: accurate passability to the steering wheel, correct switching curves of detonators for SRS dog units, corresponding to the surface and color of the interior (FXT). Ideal choice for quick and certain repair without additional modifications.

High-quality replacement driver airbag designed for Citroën Xsara and Xsara Picasso steering wheels. This airbag unit restores the vehicle’s passive safety system after deployment or damage to the original module and is a direct-fit spare for compatible steering wheel hubs. Ideal for professional workshops and experienced DIY mechanics who need a reliable, vehicle-specific steering wheel airbag identified by part numbers 96470413XT and 4112GL.

Features And Benefits

This steering wheel airbag provides the original function of the driver-side supplemental restraint system (SRS). Key benefits include precise fitment to Citroën Xsara family steering wheels, original-style connector layout for straightforward installation, and a factory-correct trim finish in Black Cornelie to match interior aesthetics. Replacing a faulty or deployed airbag with the correct part number helps extinguish the SRS warning lamp and restores occupant protection.

Installation Guidance

Intended for qualified technicians or competent DIYers with SRS experience. General replacement steps:

• Disconnect the negative battery terminal and wait at least 10 minutes to allow SRS capacitors to discharge.
• Follow the vehicle manufacturer’s steering wheel removal procedure to avoid damage to the clock spring (spiral cable).
• Remove retaining fasteners and carefully disconnect the airbag electrical connector(s); avoid pulling on wiring.
• Transfer any trim or horn contacts if required and fit the new airbag, ensuring correct orientation and connector seating.
• Tighten fasteners to the manufacturer’s torque specification and perform SRS system checks with appropriate diagnostic equipment.

Most Common Reasons For Failure

Driver airbags typically fail or require replacement for the following reasons:

• Deployment during a collision — the inflator and bag assembly must be replaced after activation.
• Electrical faults such as corroded or damaged connectors and wiring in the steering column or clock spring.
• Physical damage to the airbag cover or housing from impact or improper removal.
• Moisture ingress or long-term deterioration affecting connector contacts or pyrotechnic components.

Technical Information

• Manufacturer: Citroën (Stellantis)
• Model: Xsara; Xsara Picasso
• Product Codes: 96470413XT; 4112GL
• Additional Numbers: (4112.GL); 4112GL/4112.GL

Notes For Mechanics And DIYers

Before installation, verify connector type and clock spring condition. A worn or damaged clock spring can cause intermittent SRS faults even after a new airbag is fitted. If the SRS warning lamp remains lit after replacement, perform a diagnostic readout and clear codes only after correcting root causes. Avoid using power tools on internal pyrotechnic fasteners and always handle the airbag module with the cover facing away from you.

Why Choose This Part

If your vehicle is listed among the compatible models and the required part numbers match (96470413XT / 4112GL), this airbag offers a direct-fit solution that preserves interior appearance and restores driver protection. Practical for workshops handling post-collision repairs and for technically skilled owners carrying out safety system restoration.

The seat side airbag protects the torso and pelvis during a side impact by deploying from the outer side of the seatback. It is a critical component of the SRS (Supplemental Restraint System) and is designed to reduce injury risk in lateral collisions.

Replacement is typically required after airbag deployment in an accident or if the module or wiring is physically damaged. SRS fault messages can also indicate a defective initiator or damaged wiring under the seat, which often necessitates replacement of the module or associated harness.

Always confirm compatibility by comparing OEM numbers on your original part and visually checking the connector type and mounting points. The included wiring harness reduces installation time and the risk of incorrect connections.

Installation recommendations: disconnect the battery before any work on SRS components and wait at least 10 minutes to allow system capacitors to discharge. Work in an antistatic manner, do not store the module with its frontal side facing down, and protect it from impacts and excessive heat. After installation perform a full SRS diagnostic and clear any fault codes using an appropriate diagnostic tool (for example Lexia/DiagBox).

Technical Information

• Manufacturer: PSA Citroën/Peugeot
• Model: Citroën Xsara II, Right Seat (Passenger Side)
• Product Codes: 8216.Z4; 928751900
• Other Numbers: HZE – Tramontane; NFP (No Longer Produced)

Suitable for professional workshops and experienced DIY mechanics who search by part number. Verify OEM references and connector fitment before ordering to ensure a correct and safe replacement.

Purpose and Function: The seat side airbag protects the driver’s chest and pelvis in the event of a side impact. The inflator module is integrated into the seat backrest and deploys through a predefined seam in the upholstery. Correct operation depends on an intact upholstery seam, secure mounting to the seat frame and a reliable electrical connection to the vehicle’s SRS control unit.

Common Faults And Causes: Typical symptoms include an illuminated SRS/airbag warning lamp and stored error codes related to the driver side airbag circuit or abnormal resistance values. Frequent causes are a corroded or damaged connector under the seat, broken wires in the seat’s moving sections, or activation following a previous collision. This part is intended as a direct replacement; installing the complete module with wiring commonly resolves circuit and detection issues.

Installation Recommendations

Safety First: Always disconnect the vehicle battery before beginning work and wait at least 10 minutes to allow SRS capacitors to discharge. Install the airbag only into a compatible left-hand driver’s seat and secure it to the factory mounting points. Do not attempt to measure the inflator’s resistance directly with standard multimeter probes. After fitting, clear fault memory using diagnostic equipment and verify the entire SRS system is functioning. Inspect the seam of the upholstery where the airbag deploys and check the overall stability and fittings of the seat.

Compatibility Note: This airbag is designated for Citroën Xsara II (facelift generation). Before ordering, compare the part numbers and connector type with the original unit in the vehicle, especially if the car has optional seat equipment or non-standard trim.

Technical Information

• Manufacturer: PSA (Citroën/Peugeot)
• Model: Citroën Xsara II, Driver Side Seat Side Airbag (Left), Interior HZE – Tramontane
• Product Codes: 8216.Z3, 8216Z3, 928751800
• Additional Numbers: HZE (Tramontane – interior code), NFP (No Further Production)

Packaging: The delivery includes the left seat side airbag module complete with wiring harness and connector. As an original PSA component, the dimensions, mounting points and electrical plug shape correspond to the Citroën Xsara II seats, simplifying installation and reducing the risk of incompatibility.

Overview

This seat-mounted side airbag protects the occupant’s chest and pelvis in a lateral collision. It is designed specifically for the second-generation Xsara (facelift) and is commonly fitted across body styles (hatchback, estate/Break, Coupé) depending on trim and equipment. Confirm compatibility by comparing OEM codes and connector/fastening types with your original part before ordering.

Compatibility And Fitment

Typically found on Citroën Xsara II vehicles produced around 2000–2005 (facelift generation). Fitment depends on the seat trim and equipment level. Always verify the OEM codes stamped on your original airbag and visually compare the plug, harness routing and mounting brackets to ensure correct replacement.

Common Failure Modes

Replacement is usually required after activation in a collision or when an electrical fault is detected by the SRS system. Typical causes include deployed initiators, increased resistance or open circuits in the initiator, damaged wiring in the seat rail area, or connector corrosion. If the vehicle reports a fault tied to this module, replacement and subsequent diagnostic clearing are necessary.

Installation And Aftercare

Installation should be carried out by a qualified technician or an experienced DIYer familiar with SRS systems. Basic recommended steps: disconnect the vehicle battery and follow manufacturer guidance to allow the SRS system to discharge, remove or recline the seat as per the service manual, unclip and remove the original module, fit the replacement unit and secure all retainers, reconnect the connectors and re-fit trim. After installation, perform a full airbag system scan (Lexia/PP2000/DiagBox or equivalent) and confirm the airbag warning lamp extinguishes. Always observe safety procedures and handle modules only in accordance with SRS safety rules.

Technical Information

• Manufacturer: PSA – Citroën/Peugeot
• Model: Citroën Xsara II (front right seat – passenger, seat backrest side airbag)
• Product Codes: 8216Y1, 8216Z4
• Additional Numbers: 928751900, 518741500, HZE (– Tramontane), NFP

For trouble-free replacement, visually compare the connector type, mounting points and labelled OEM numbers before purchase. If unsure about compatibility or the installation process, consult a professional mechanic. Correct code matching and proper diagnostic clearing are essential to restore full SRS functionality.

Designed for mechanics and DIY car enthusiasts, this airbag is an essential component for maintaining vehicle safety standards. Airbags typically need to be replaced after deployment due to their one-time use nature, making it important to regularly inspect and replace for optimal functionality. Proper installation is critical; it involves removing the seat and connecting the airbag to your vehicle’s safety system to ensure reliable operation in the event of an accident.

Using high-quality materials, this airbag is designed for effective deployment when needed, ensuring the safety of the occupants during a collision. A timely replacement can significantly enhance the overall safety features of your vehicle.

Technical Information

• Manufacturer: PSA Citroën Peugeot
• Model: Xsara II
• Product Codes: 928751800, 518741400, 8216Y0
• Additional Numbers: N/A

Ensure the safety of your vehicle’s interior with this essential airbag component, seamlessly compatible with the Citroën Xsara II model.

This passenger airbag is designed specifically for Citroën Xsara models, providing an essential safety feature to help protect front-seat passengers during collisions. Manufactured to meet PSA standards, it ensures reliable deployment and occupant protection.

Function and Importance

The airbag inflates rapidly upon impact, cushioning the passenger and reducing the risk of injury. It plays a critical role within the vehicle’s overall safety system and is directly connected to the car’s crash sensors.

Compatibility and Application

Compatible with Citroën Xsara models equipped with the specified safety system and color coded as HZE – Tramontane. Ideal for mechanics or DIY enthusiasts performing interior safety system repairs or replacements.

Installation Tips

Replacement requires careful disconnection of the vehicle’s battery and adherence to safety protocols to prevent accidental deployment. Typically mounted within the dashboard on the passenger side, removal involves detaching decorative panels and unscrewing the airbag module before installing the new unit.

Common Issues and Maintenance

Airbags may become non-functional due to electrical faults, dashboard damage, or after a prior deployment. If the airbag warning light appears on the dashboard, it is crucial to have the system inspected and repaired promptly to maintain occupant safety.

Technical Information

• Manufacturer: PSA (Peugeot Société Anonyme)
• Model: Citroën Xsara
• Product Codes: 9642313680, 8216X5
• Additional Numbers: NFP, HZE – Tramontane (color)

Original passenger frontal airbag module for the Citroën Xsara in color code FZL – Ouragan Grey. This is an OEM used PSA part carrying product numbers 9642313680 and 8216G2. Its accurate color match and correct connector layout make it a practical choice for repairs that preserve both occupant safety and interior appearance.

Compatibility and Application

Designed specifically for the Citroën Xsara dashboard in FZL (Ouragan Grey). Before ordering, compare the part numbers, connector type and mounting points with your original module. Note: this item is marked NFP (No Further Production), so new replacements are often unavailable, making correctly matched used modules desirable for older vehicles. Do not confuse with the Xsara Picasso model, which uses different dashboard components and airbag modules.

Function And Common Reasons For Replacement

The passenger airbag is a key element of the vehicle’s passive safety system, deploying in a frontal impact to protect the occupant from collision with the dashboard. Replacement is required after deployment, if the airbag cover or module is damaged, following intrusive dashboard repairs, or when the airbag control unit reports faults (for example internal igniter error or open circuit). Long-term causes of module failure can include water ingress, corrosion of connectors, physical damage or prior improper repairs.

Installation And Safety Guidelines

Installation should be carried out by a qualified technician because the airbag is a pyrotechnic safety component. Always disconnect the vehicle battery and wait at least 10 minutes to allow residual system voltage to dissipate before any handling. Do not connect measurement instruments directly to airbag firing circuits. The module is typically fastened from the rear to the dashboard reinforcement; after fitting, verify the system with diagnostic equipment (e.g. Lexia/Diagbox) and clear any stored fault codes. Follow the vehicle manufacturer’s service procedures during removal and refit.

How To Verify Compatibility

Confirm compatibility primarily by matching the original part number (9642313680 or 8216G2) and the color code FZL. Additionally inspect connector pinout, plug shape and mounting points on the dashboard. When possible, cross-check the VIN in a PSA parts catalog to ensure exact fit and full function of the restraint system.

Technical Information

Manufacturer: PSA (Citroën/Peugeot)
Model: Citroën Xsara, color code FZL – Ouragan Grey
Product Codes: 9642313680, 8216G2
Additional Numbers: NFP (No Further Production); color code FZL (Ouragan Grey)

Notes

Ensure the replacement module matches the vehicle’s safety system specifications. Incorrect parts or improper installation can compromise occupant protection and trigger persistent airbag faults. If in doubt, consult a professional technician or refer to an official PSA parts catalog by VIN.

Airbags frequently need replacement due to deployment in accidents, wear over time, or potential electrical issues. Experts recommend replacing an airbag any time the vehicle has been involved in a serious accident or when signs of malfunction appear.

This airbag plays a crucial role in preventing injuries by cushioning the impact during an accident, ultimately reducing the risk of severe harm to passengers.

Technical Information

Manufacturer: PSA Citroën Peugeot

Model: Xsara

Product Codes: 8214NG

Additional Numbers: FZL – GREY OURAGAN

The Steering Wheel Airbag is an essential safety component for the Citroën Xsara and Xsara Picasso models. Designed to deploy in the event of a collision, this airbag provides crucial protection for the driver and enhances overall vehicle safety. By promptly replacing a faulty airbag, you ensure that your vehicle meets safety regulations and protects its occupants effectively.

Why Replace Your Steering Wheel Airbag?

Over time, steering wheel airbags can degrade due to exposure to various environmental factors, such as sunlight and temperature fluctuations. This degradation can result in reduced deployment effectiveness during an impact. Regular inspections and timely replacements are vital to maintain optimal safety standards in your vehicle.

Technical Information

• Manufacturer: PSA Citroën Peugeot
• Model: Citroën Xsara, Xsara Picasso
• Product Codes: 96348639ZL, 4112AW
• Additional Numbers: 4112AW, 96348639ZL

Installation Instructions

Replacing the steering wheel airbag typically involves disconnecting the vehicle’s battery before accessing the steering wheel assembly. It is crucial to follow the manufacturer’s guidelines and use proper tools to ensure a safe and accurate installation. After installation, reconnect the battery and perform a system check to confirm that the airbag system is functioning correctly.

Conclusion

Investing in a new Steering Wheel Airbag is a wise decision for maintaining the safety of your Citroën Xsara or Xsara Picasso. Ensure you purchase a quality product with the correct specifications to guarantee optimal performance and reliability.