Overview

High-quality Passenger Airbag Designed For Citroën C4 First Series. This airbag module is a direct-replacement style unit intended for the front passenger position. It Contains Two Igniters And Is Manufactured To Fit The Original Mounting Points And Connector Layout Used On Early Citroën C4 Models, Making It A Practical Choice For Mechanics And Experienced DIY Enthusiasts Searching By Part Numbers 9646339680 Or 8216GJ.

Key Features And Function

• Occupant Protection: Deploys In Frontal Collisions To Reduce Risk Of Head And Chest Injuries For The Front Passenger.
• Two Igniters: Dual-initiator Design Provides Reliable Deployment Characteristics Matching OEM Behavior.
• Direct Fit: Matches Original Mounting Points And Electrical Connector For Easier Replacement.
• Part Number Reference: Commonly Searched Under 9646339680 And 8216GJ, Improving Findability For Repairs.

Compatibility

Suitable For Citroën C4 First Generation Models (First Series). Always Check The Vehicle’s Model Year And Interior Trim To Confirm Mounting And Connector Type Match The Unit You Are Replacing.

How The Part Is Replaced

• Safety First: Disconnect The Battery And Wait At Least 10–15 Minutes Before Starting Work To Allow Residual System Energy To Dissipate.
• Access: Remove Glove Box Or Trim Panels As Required To Reach The Passenger Airbag Module Fasteners.
• Disconnect: Carefully Unplug The Airbag Electrical Connector(s). Handle Connectors By The Housing—Do Not Pull On Wiring.
• Remove: Unscrew The Retaining Bolts And Extract The Old Module; Keep Bolts And Fasteners For Reuse If Undamaged.
• Install: Position The New Airbag Module, Secure With Correct Torque, Reconnect Electrical Connector(s) And Refit Trim.
• System Check: Reconnect The Battery And Verify Airbag Warning Lamp Behavior. If The Lamp Remains On, Diagnose SRS Fault Codes With A Suitable Diagnostic Tool.

Installation Recommendation

Work On Airbag Systems Requires Caution. If You Are Not Confident Working With Supplemental Restraint Systems, Have The Replacement Performed By A Professional. Always Follow Manufacturer Safety Procedures. Disconnect The Battery Before Starting Work And Observe ESD/Static Precautions Around The Airbag Module. Use Only Specified Torque Values For Fasteners And Ensure Connectors Are Fully Seated.

Why This Part Most Often Fails

• Age And Environmental Exposure: Moisture, Corrosion, And Long-Term Heat Cycling Can Degrade Connectors Or Internal Components.
• Previous Deployment: Airbags That Have Deployed Must Be Replaced; Internal Components Are Single-Use.
• Electrical Faults: Damaged Wiring, Poor Grounding, Or Corroded Connectors Can Cause Warning Lamps Or Failure To Deploy.
• Impact Damage: Minor Collisions Or Interior Damage Can Compromise The Module Even If Other Damage Is Not Obvious.

Technical Information

• Manufacturer: Stellantis (Citroën)
• Model: Citroën C4 First Series
• Product Codes: 9646339680, 8216GJ
• Other Numbers: NFP (As Marked)

Additional Notes For Mechanics

When Replacing The Passenger Airbag, Confirm That Clock Spring And Passenger Presence Sensors (If Equipped) Are Functioning Correctly, Since Faults In Related Components Can Trigger SRS Error Codes. After Installation, Use A Compatible Diagnostic Tool To Clear Historical Faults And Verify That The Airbag Indicator Operates Normally.

Product Overview

This rear center seat belt is a direct-fit replacement part designed for the middle rear seating position of the Citroën C4 first generation. It restores occupant restraint and safety compliance after wear or damage. The part is commonly searched under the code 8974LF and is compatible with many first-series C4 models produced during the mid-2000s.

Key Benefits

• Direct replacement for original equipment on Citroën C4 (first generation).
• Restores proper restraint function for the rear middle passenger.
• Improves safety after webbing damage, retractor failure, or post-impact replacement needs.
• Quick identification by product code 8974LF for faster sourcing and ordering.

Technical Information

• Manufacturer: Stellantis / Citroën
• Model: Citroën C4 (First Generation)
• Product Codes: 8974LF, NFP
• Additional Numbers: None Specified

Compatibility

Fits Citroën C4 First Generation (commonly vehicles produced circa 2004–2010). Intended for the rear middle seating position. Search by product code 8974LF for fastest identification on parts lists.

Function And Common Faults

The rear center seat belt secures the middle rear occupant, locking under sudden deceleration to reduce forward movement. Typical failure modes include frayed or cut webbing, retractor mechanism seizure, jamming of the locking tongue, corrosion or loosening of anchor bolts, and damage following a vehicle impact. Buckles may also develop electrical faults if equipped with a seat-belt sensor.

Why This Part Fails Most Often

• Wear And Abrasion: Frequent use and rubbing against seat edges cause webbing deterioration over time.
• Contamination: Dirt, grit, and liquids can enter the retractor, causing jamming or poor retraction.
• Mechanical Damage: Improper handling, heavy objects, or previous collisions can damage anchors and retractor internals.
• Corrosion: Moisture ingress at anchor points can weaken fixings and moving parts.

Installation Recommendations

Replacement is straightforward for experienced technicians and competent DIYers with basic tools. Follow these steps and safety points:

• Disconnect The Battery Before Work: Always disconnect the vehicle battery and wait a few minutes to reduce the risk of accidental SRS/airbag system deployment or electrical damage.
• Access The Belt: Remove the rear seat cushion and interior trim panels as required to expose the anchor bolts, retractor housing, and buckle mounting.
• Unbolt Anchors: Remove lower anchor bolts and the top anchor (if roof-mounted). Keep track of any spacers or trim plates.
• Disconnect Electrical Connector If Present: If the buckle includes a seat-belt warning sensor, disconnect the electrical connector carefully.
• Fit New Unit: Install the new belt assembly with correct routing, ensuring the webbing is free of twists and the buckle is accessible.
• Tighten Bolts To Manufacturer Specification: Secure all anchor bolts and torque them according to Citroën service data.
• Function Test: Verify free retraction and positive locking by a firm pull. Check buckle latching and any warning lamp functionality.
• Post-Installation Check: Refit trim and seats, reconnect the battery, and perform a final system check.

Practical Tips

• Replace The Belt After Impact: Even If Webbing Appears Intact, Replace Seat Belts After A Crash—Load limiters and internal components may be compromised.
• Keep Webbing Clean: Regularly clean webbing with mild soap and water; avoid bleach and strong solvents.
• Inspect Anchors And Trim: Check for corrosion or damage to the mounting points and surrounding trim during replacement.

Ordering And Identification

When searching or ordering, use the product code 8974LF. Include vehicle model and production year (Citroën C4 First Generation, circa 2004–2010) to ensure correct fitment. Fast identification by code reduces downtime in workshops and speeds up DIY repairs.

Recommendation

If You Are Not Fully Confident With Vehicle Safety Systems, Have Installation Performed Or Checked By A Qualified Technician. Proper Fastening, Correct Routing Of Webbing, And Electrical Reconnection (If Present) Are Essential For Safe Operation.

High-quality roof (curtain) airbag designed for the passenger side of the Citroën C4 I. Ideal for professional workshops and experienced DIY mechanics who need a direct-fit safety component identified by OEM numbers 9646572080 and 833134. This airbag restores side-impact and rollover protection for the cabin head area and is a commonly searched spare part by its product codes.

Technical Information

• Manufacturer: Stellantis / Citroën
• Model: Citroën C4 I (First Generation) — 3-Door and 5-Door Bodystyles
• Product Codes: 9646572080, 833134, NFP
• Additional Numbers: 833134, 9646572080

Compatibility And Application

Fits Citroën C4 First Generation (commonly referred to as C4 I) in both 3-door and 5-door versions where a right-side roof/curtain airbag is specified. Often looked up and ordered using the OEM reference numbers listed above.

Function And Typical Failure Causes

The roof (curtain) airbag deploys in side-impact or rollover events to protect occupants’ heads and upper bodies. Common reasons for replacement include:

• Deployment During Collision — Once deployed the module must be replaced.
• Physical Damage — Damage to the airbag cover, housing, or inflation channel caused by prior repairs, improper removal of headliner trim, or impact.
• Connector Or Wiring Damage — Corroded or broken connectors from moisture ingress or poor handling during disassembly.
• Storage Or Handling Damage — Creases, cuts or contamination to the airbag fabric or inflator compromise performance.

Installation Recommendation

Safety-Critical Part — Professional Installation Recommended.

• Disconnect Battery: Always disconnect the negative battery terminal before starting and wait at least 10 minutes to allow SRS circuits to discharge.
• Follow Manufacturer Procedures: Remove headliner trim and retaining clips carefully to avoid damaging the airbag or curtain rail.
• Handle Connectors With Care: Inspect connectors and wiring harness for corrosion or damage; replace any compromised components.
• Secure Mounting: Reuse or replace mounting hardware as required and ensure the airbag is seated and fastened according to vehicle specifications.
• Diagnostic Check: After installation clear SRS fault codes and verify proper system operation with a diagnostic tool. If the SRS light remains on, perform a full system scan and address faults before returning the vehicle to service.
• Professional Tools: Use appropriate trim tools and torque settings; improper installation can impair airbag function.

Why Replace This Part

Roof curtain airbags are replaced primarily after activation in an accident. They may also require replacement if physically damaged during interior repairs, if connectors were compromised by moisture or corrosion, or if the unit shows mechanical damage. Because the airbag is a life‑safety component, any signs of damage or previous deployment mandate replacement rather than repair.

Keywords: Citroën C4 airbag, roof airbag, curtain airbag, passenger side airbag, 9646572080, 833134. Suitable for workshops and skilled DIY installers seeking an OEM‑referenced replacement for C4 I models.

Product Overview

High-quality passenger seat airbag designed for Citroën C4 (first series). This replacement airbag is intended for the right-hand passenger seat and matches the factory trim color code HZD – Black Mistral. It is ideal for professional workshops and experienced DIYers looking to restore the vehicle’s passive safety after deployment or damage. Common search terms: Citroën C4 passenger seat airbag, 96536612ZD, 8216GE, seat airbag replacement.

Technical Information

• Manufacturer: Stellantis (Citroën)
• Model: Citroën C4 I (First Series)
• Product Codes: 96536612ZD, 8216GE
• Additional Numbers: 8216GE | 96536612ZD

Function and Purpose

The passenger seat airbag (seat cushion/side airbag) is part of the vehicle’s Supplemental Restraint System (SRS). In the event of a side impact or rollover, it deploys to reduce the risk of injury by cushioning and limiting occupant movement. Correct fitment and secure electrical connection are essential to ensure reliable deployment when needed.

Compatibility and Fitment

Designed specifically for Citroën C4 first series passenger seats. Compatibility is typically referenced by the OEM part numbers listed above. When replacing an airbag, ensure the trim color and connector type match the vehicle’s original equipment to maintain appearance and functionality.

Installation Recommendations

• Disconnect the negative battery terminal and wait at least 10–15 minutes before starting work to allow SRS capacitors to discharge.
• Follow the vehicle manufacturer’s disassembly procedure for seat trim and mounting fasteners to avoid damaging clips or wiring.
• Handle the airbag module with care: store facing upward and avoid placing objects on the airbag surface.
• Disconnect the airbag connector(s) carefully; airbag connectors are usually color-coded (yellow) and may have locking tabs.
• When installing, ensure connectors are fully seated and locking tabs engaged. Refit trim and seat fasteners to the specified torque values in the workshop manual.
• After installation, reconnect the battery and verify SRS system status with a diagnostic tool. Repair or reset by a qualified technician if an SRS fault code remains.

How To Replace (Overview)

1. Park vehicle on a level surface, engage parking brake and turn ignition off.
2. Disconnect negative battery terminal and wait 10–15 minutes.
3. Remove seat trims and access the airbag module following manufacturer instructions.
4. Unplug the airbag electrical connector(s) and remove the module from the seat frame.
5. Install the new airbag, connect the electrical connector(s), secure the module and reassemble trims.
6. Reconnect battery and clear/verify SRS codes with appropriate diagnostic equipment.

Why This Part Most Commonly Fails

Seat airbags are most commonly rendered unusable by deployment in a crash. Other frequent causes of failure include damaged or corroded connectors, poor electrical contact after previous repairs, and physical damage to the module or wiring during seat removal. Incorrect handling during repairs can also damage the squib or pyrotechnic elements, making replacement necessary.

Safety Notes

Airbags are safety-critical components. If you are not fully confident in performing the replacement, have the work carried out by a qualified technician. Always follow manufacturer procedures and use appropriate diagnostic tools to confirm the SRS system is restored to full operation.

Additional Information

Original part references included in the title and tags (96536612ZD / 8216GE) help with fast identification and increase findability in searches. The color code HZD corresponds to the Black Mistral trim used on certain Citroën C4 interiors.

The passenger seatbelt for the first generation Citroën C4 in the three-door version is designed to ensure the safety of the passenger in the front seat. This is an original used part from the PSA concern, which is suitable both for professional car mechanics and for home repairs of Citroën and Peugeot cars.

This pyro belt is designed to work with the airbag system and seat belt pretensioners. In the event of a collision, the pre-tensioner is activated, which quickly tightens the belt to the passenger’s body and thus improves the effectiveness of the restraint system. Thanks to the original design, a correct fit in the bodywork and compatibility with the car’s electrical installation are ensured.

Technical information:
Manufacturer: PSA / Citroën / Peugeot
Model: Citroën C4 I (first series), three-door body (3dv)
Location: passenger seat belt (front right) with pyro cartridge
Product codes: 96479909XX, 8974KT
Other numbers: NFP (designation of a part no longer produced in the PSA network)
Part category: airbags and seat belts, interior

The part is often searched under the catalog numbers 96479909XX and 8974KT, which correspond to the original PSA design. It is especially suitable for Citroën C4 I cars in the three-door version, for which the correct functioning of the airbag and restraint system must be maintained according to the manufacturer’s original specification.

Installation recommendations:
– Before assembly, always disconnect the battery and wait at least 10-15 minutes to avoid unintentional activation of the pyrotechnic elements.
– Carry out the installation in accordance with the workshop manual for the specific Citroën C4 I model, including the prescribed tightening torques of the screws and the correct belt routing.
– Check that the wiring, connectors and fuses of the airbag system are undamaged, the connectors must be firmly seated and free of oxidation.
– After installation, diagnose the airbag unit using a suitable diagnostic tool and erase any error codes.
– We recommend installing safety elements in a clean environment, without oil and grease on the winding mechanism and belt.

A properly installed passenger pyrobelt for Citroën C4 3 doors with codes 96479909XX and 8974KT contributes to maximum crew safety and maintaining the full functionality of the car’s restraint system.

This passenger airbag is designed for Citroën C4 models and is commonly identified by OEM numbers 9682165080 and 8216RA. It is a direct-fit safety component intended to restore the passenger restraint system after deployment or damage. Ideal for professional workshops and experienced DIY mechanics who perform SRS repairs, the unit matches original mounting points and electrical connectors to simplify replacement and reduce diagnostic time.

Key Benefits

Fits Original Equipment Locations: Direct replacement for affected Citroën C4 passenger side airbag modules. Reliable Fitment By Part Number: Commonly searched under 9682165080, 8216RA, and related OEM references.Safety Restoration: Restores passive safety for the front passenger seat when installed and coded correctly as required by the vehicle SRS system.

Technical Information

• Manufacturer: Citroën / Stellantis
• Model: Citroën C4 (First Generation)
• Product Codes: 9682165080, 8216RA
• Additional Numbers: 8216.RA, 8216RA

Function

The passenger airbag deploys in the event of a crash to protect the occupant from impact. It is part of the vehicle SRS (Supplemental Restraint System) and works together with seat belts, crash sensors, and the airbag control unit to ensure timely deployment. The module contains the inflator and the folded airbag cushion, mounted behind the dashboard on the passenger side.

How It Is Replaced

Replacement typically requires removing the dashboard trim or glovebox area to access the airbag module. Steps generally include:

• Disconnect Battery: Always disconnect the vehicle battery and wait the manufacturer‑recommended time to discharge SRS capacitors before starting work.
• Remove Trim And Access Panels: Carefully remove dash trims or glovebox components to expose the airbag mounting points and connector.
• Unplug Electrical Connector: Release the airbag electrical connector(s) and any retaining clips.
• Unbolt The Module: Remove the fasteners securing the airbag module and withdraw it from the housing.
• Fit New Unit: Position the replacement airbag, secure bolts to the correct torque, and reconnect the electrical connector.
• Reassemble And Verify: Reinstall trims, reconnect the battery, and clear or verify SRS faults with proper diagnostic equipment.

Please follow the vehicle manufacturer’s service manual for exact removal torque values and sequence.

Installation Recommendations

• Follow Manufacturer Procedures: Use Citroën service information for exact removal and installation steps.
• Use Correct Tools: Use the correct torque tools and safe handling procedures for SRS components.
• Diagnostic Check: After installation, verify the SRS system with appropriate diagnostic equipment to ensure no fault codes remain and the airbag warning light behaves correctly.
• Professional Handling Advised: While experienced mechanics can perform the replacement, SRS work should be carried out by technicians familiar with airbag systems and safety precautions.

Why This Part Fails

Passenger airbags rarely fail under normal conditions. The most common reasons for replacement are:

• Deployment In A Collision: The airbag inflator and cushion must be replaced after any deployment.
• Physical Damage: Damage from interior impact, improper removal, or previous repairs can compromise the module.
• Electrical Or Connector Issues: Corrosion, damaged wiring, or poor connector contact can produce SRS fault codes and disable the airbag.
• Water Ingress Or Moisture: Exposure to moisture can corrode components and lead to failure.

Search And Identification

This part is often located by searching OEM numbers 9682165080 or 8216RA. Always cross‑reference these codes with the vehicle model and production details to confirm fitment before purchase.

Important Safety Note

Airbag systems are critical safety components. Always observe SRS safety precautions during handling and installation. If you are not fully confident in performing SRS repairs, consult a qualified technician.

]]> https://www.usedpartsvendor.com/interior/airbags/c4-i-airbags/airbag-steering-wheel-citroen-c4-96823829zd-4112kf/ Mon, 24 Nov 2025 03:06:02 +0000 https://www.usedpartsvendor.com/uncategorized/airbag-steering-wheel-citroen-c4-96823829zd-4112kf/ Driver airbag for the steering wheel for Citroën C4 first series. Version HZD – Black Mistral. With one squib (pyrotechnic initiator).

Original-fit driver airbag designed for Citroën C4 (first generation). This steering wheel airbag uses OE-compatible fixings and a single squib inflator, making it a direct replacement for vehicles equipped with the HZD trim in Black Mistral. Ideal for professional workshops and experienced DIY mechanics searching by part numbers 96823829ZD or 4112KF.

Features And Benefits

– Direct-fit replacement for the driver side airbag module in the steering wheel, maintaining original safety function and steering appearance.
– Single-squib inflator for standard driver deployment characteristics.
– Black Mistral finish to match original steering wheel trim.
– Supplied with connector(s) ready for installation; optimises repair time in collision repairs.

Technical Information

• Manufacturer: Citroën (Stellantis)
• Model: Citroën C4 I (First Generation, C4 I)
• Product Codes: 96823829ZD, 4112KF
• Additional Numbers: 4112KF | 96823829ZD
• Color: Black Mistral
• Inflator: Single squib (pyrotechnic initiator)
• Location: Driver steering wheel airbag

Installation Recommendations

Always follow safety procedures when working with Supplemental Restraint System (SRS) components. Before any work, disconnect the vehicle battery and wait at least 10 minutes to allow the system capacitors to discharge. Remove the steering wheel airbag module using the appropriate trim tools and fasteners access points; disconnect the airbag connector(s) and carefully replace the module. Ensure the steering column clock spring is correctly centred and undamaged before reassembly. After installation, verify the SRS system with a diagnostic tool and clear fault codes if required. If unsure, have the replacement carried out or verified by a qualified technician with proper SRS diagnostics equipment.

How To Replace (Overview)

1) Park vehicle on level ground, apply parking brake and disconnect negative battery terminal.
2) Wait minimum 10 minutes to discharge residual SRS energy.
3) Access airbag retaining screws (usually from the rear of the steering wheel), remove them and carefully pull the airbag module forward.
4) Disconnect the squib connector(s) and any horn or steering wheel wiring.
5) Fit the new airbag, reconnect connectors, secure fasteners to the manufacturer’s specification and reassemble.
6) Reconnect battery and perform SRS system check with diagnostic equipment.

Why This Part Fails Most Often

– Deployment During A Collision: The most common reason a driver airbag needs replacement is previous deployment in an accident; deployed airbags must always be replaced.
– Electrical Faults Or Connector Damage: Corrosion, damaged wiring, or poor connections can trigger SRS warnings and prevent proper deployment.
– Clock Spring Wear Or Damage: A faulty clock spring (spiral cable) can interrupt the electrical connection to the airbag squib and cause airbag warnings.
– Environmental Or Physical Damage: Moisture ingress, impacts to the steering wheel, or improper prior repairs can compromise the airbag unit.

Notes For Professionals And DIYers

Searchable part numbers (96823829ZD, 4112KF) increase findability when sourcing replacement modules. Use compatible diagnostic equipment after installation to confirm circuit integrity and SRS readiness. Replace any related components (clock spring, connectors) if they show wear or damage to ensure reliable operation.

]]> https://www.usedpartsvendor.com/interior/seat-belts/c4-i-seat-belts/passenger-pyro-belt-peugeot-307-96527696xx-8974t5-2/ Fri, 14 Nov 2025 03:26:50 +0000 https://www.usedpartsvendor.com/uncategorized/passenger-pyro-belt-peugeot-307-96527696xx-8974t5-2/ Passenger Seatbelt For Peugeot 307 And Citroën C4 Five-Door Model

This original-style passenger seatbelt assembly with pyrotechnic pretensioner is designed for Peugeot 307 and Citroën C4 five-door models. Supplied under part references 96527696XX / 8974T5, the unit restores full occupant restraint performance after damage or deployment. Ideal for professional workshops and experienced DIY mechanics who require a direct-fit replacement that matches factory mounting points and connector interfaces.

Key Benefits

– Direct replacement for fast, reliable installation on Peugeot 307 and Citroën C4 (5-door).
– Integrated pyrotechnic pretensioner for rapid belt tensioning in the event of a collision.
– Compatible with original mounting locations and electrical connectors; often searched by product codes 96527696XX and 8974T5.
– Recommended for restoring occupant safety after belt damage, wear, or pretensioner deployment.

Technical Information

Manufacturer: Stellantis / Peugeot / Citroën
Model: Peugeot 307 (5-door), Citroën C4 (5-door)
Product Codes: 96527696XX, 8974T5 (8974.T5)
Additional Numbers: NFP (as listed)

Installation Notes

Replacement should be performed by a qualified technician or an experienced DIYer familiar with SRS components. Basic replacement steps:

• Disconnect the vehicle battery and wait at least 10 minutes before starting work to reduce the risk of accidental pretensioner deployment.
• Remove trim panels to access the seatbelt upper anchor and retractor mounting points; retain all fasteners for re-use or replace with OE-spec items.
• Unplug the electrical connector for the pyrotechnic pretensioner—note and release any locking tabs before disconnecting.
• Unbolt the lower anchor and retractor, fit the new unit, and secure bolts to the manufacturer’s torque specification.
• Reconnect the pretensioner connector, reassemble trim, reconnect the battery, and clear any SRS fault codes with a diagnostic tool.

Recommended Installation

– Always follow the vehicle manufacturer’s service manual for removal and installation sequences and torque values.
– Use a diagnostic tool (e.g., factory-level or aftermarket SRS-capable scanner) to check and clear airbag/seatbelt fault codes after fitting.
– Do not attempt to disassemble or modify the pyrotechnic pretensioner module; it is a single-use safety device.

Why This Part Fails

Common causes for replacement include:
– Pretensioner Deployment: Pyrotechnic pretensioners activate in an impact and must be replaced after deployment.
– Mechanical Wear: Webbing abrasion, fraying, or contamination (dirt, oils) can impair belt retraction and locking.
– Corrosion or Seizure: Water ingress or rust can seize the retractor mechanism, preventing proper locking.
– Electrical/Connector Damage: Damaged wiring or connectors to the pretensioner can trigger SRS faults and disable the system.

Important Safety Advice

This unit contains a pyrotechnic pretensioner—a single-use explosive component. Handle with care, keep away from heat sources, and do not attempt to disassemble. If the vehicle has been involved in a collision, inspect related mounting points and anchorings for deformation and replace any damaged parts to ensure correct function.

Compatibility And Search Tips

Many buyers search by product numbers; include the codes 96527696XX and 8974T5 when looking for direct-fit replacements for Peugeot 307 and Citroën C4 five-door models. Ensure the visible connector and mounting points match the original unit before installation.

For Professionals And Experienced DIYers

Recommended for automotive workshops and experienced home mechanics who work regularly with SRS components. Proper post-installation diagnostic checks are essential to confirm system readiness and to clear any stored fault codes.

]]> https://www.usedpartsvendor.com/interior/seat-belts/c4-i-seat-belts/pyro-belt-passenger-citroen-c4-5-doors-96527696xx-8974t5-2/ Fri, 14 Nov 2025 03:15:55 +0000 https://www.usedpartsvendor.com/uncategorized/pyro-belt-passenger-citroen-c4-5-doors-96527696xx-8974t5-2/ Passenger seat belt for CITROËN C4 and PEUGEOT 307. Five-door model.

Product Overview

High-quality passenger side pyrotechnic seat belt assembly designed for Citroën C4 (5-door) and Peugeot 307 models. Supplied to meet OEM standards for fit and function, this seat belt includes the pretensioner mechanism that reduces webbing slack in the event of a collision, improving occupant restraint together with the vehicle’s airbag system. Commonly searched by part numbers 96527696XX and 8974T5, this unit is intended for professional installers and experienced DIYers who work on SRS-equipped vehicles.

Technical Information

• Manufacturer: Stellantis (CITROËN / PEUGEOT)
• Model: Citroën C4 (5-Door, C4 I), Peugeot 307 (5-Door)
• Product Codes: 96527696XX, 8974T5
• Other Numbers: 8974.T5

Function And Characteristics

This assembly combines the seat belt webbing, retractor and a pyrotechnic pretensioner. In the event of a qualifying impact the pretensioner fires to remove slack from the belt instantly, securing the occupant more effectively and improving the performance of the airbag. Pretensioners are single-use safety devices: once activated they must be replaced.

Typical Causes Of Failure

Seat belts and pretensioners most commonly fail or require replacement for the following reasons:

• Deployment During A Crash: Activation of the pyrotechnic charge makes the unit unusable and requires replacement.
• Mechanical Wear And Tear: Frayed webbing, damaged buckles or worn retractors from long-term use or improper handling.
• Corrosion Or Connector Damage: Moisture and corrosion at the electrical connector can create SRS faults or prevent pretensioner activation.
• Electrical Faults: Open circuits, damaged wiring or poor contacts in the SRS loop can cause warning lights and disable the system.

Replacement Guide And Installation Recommendations

These instructions are intended as a general guide for trained technicians and competent DIYers. Always follow the vehicle manufacturer’s service manual for exact procedures and torque values.

1. Disconnect The Negative Battery Terminal And Wait At Least 10 Minutes To Allow The SRS Capacitors To Discharge.
2. Remove Interior Trim Panels And Seats As Required To Access The Retractor And Lower Anchor Points.
3. Carefully Disconnect The Electrical Connector For The Pretensioner (Observe Connector Locking Mechanisms).
4. Unbolt The Retractor And Any Mounting Brackets, Remove The Old Assembly.
5. Install The New Seat Belt Assembly, Secure Bolts To The Manufacturer’s Specified Torque.
6. Reconnect The Pretensioner Connector And Reinstall Trim Panels. Reconnect The Battery.
7. Clear Any SRS Fault Codes Using A Diagnostic Tool And Verify The Airbag Light Is Off Before Returning The Vehicle To Service.

Important: Because the seat belt pretensioner is part of the Supplemental Restraint System, correct installation and diagnosis with an appropriate SRS-capable diagnostic tool is strongly recommended. If the airbag warning lamp remains on after replacement, further diagnosis of the SRS circuit is required.

Why Replace This Part

Beyond crash deployment, replacement is recommended when the belt webbing is torn or excessively worn, the retractor fails to retract smoothly, or the SRS system reports a pretensioner fault. Driving with a compromised seat belt assembly reduces occupant protection and may prevent the airbag system from operating as designed.

Notes For Mechanics And DIYers

Searches for this component are frequently performed using the OEM numbers 96527696XX or 8974T5 — include these codes in listings or work orders to speed identification. Always treat SRS components as safety-critical: use proper tools, follow service procedures and verify system status after any intervention.

]]> https://www.usedpartsvendor.com/interior/airbags/c4-picasso-airbags/airbag-steering-wheel-citroen-c4-picasso-96866504d-4112pc/ Fri, 25 Apr 2025 02:10:03 +0000 https://www.usedpartsvendor.com/uncategorized/airbag-steering-wheel-citroen-c4-picasso-96866504d-4112pc/ Driver airbag for the steering wheel for Citroën C4 Picasso and Grand Picasso up to 2011. Color HZD – Mistral Black.

High-quality replacement driver airbag designed specifically for Citroën C4 Picasso and Grand Picasso models (up to 2011). This steering wheel airbag restores the primary passive safety function after deployment or damage and is frequently searched by part numbers such as 96866504ZD and 4112PC. Ideal for professional workshops and experienced DIY mechanics who require correct fitment, original-style appearance (Mistral Black) and reliable integration with the vehicle’s airbag system.

Technical Information

• Manufacturer: Stellantis / Citroën
• Model: Citroën C4 Picasso, Citroën Grand Picasso (up to 2011)
• Product Codes: 96866504ZD, 4112PC
• Additional Numbers: 96866504D
• Position: Driver Airbag (Steering Wheel)
• Color: HZD – Mistral Black

Installation Recommendations

Always follow manufacturer procedures. Before starting any work disconnect the negative battery terminal and wait at least 10 minutes to allow residual charge to dissipate. Remove the steering wheel trim and fasteners carefully, unplug airbag connectors using appropriate tools, and avoid pulling on wiring. When installing the new airbag ensure connectors are fully seated, steering wheel alignment (clock spring) is correct and fasteners are tightened to the manufacturer’s torque specification. After installation perform required system checks with suitable diagnostic equipment to clear faults. If you are not experienced with SRS systems, have the job carried out by a qualified technician.

Why This Part Fails

Airbags are most commonly replaced after deployment in a collision. Other frequent causes include electrical faults (damaged wiring or corroded connectors), prior improper removal or repairs, water ingress into the steering column area, or accidental deployment due to sensor faults. Airbags have no fixed service interval; replacement is required after activation or when damage/defects are confirmed.

Compatibility And Search Tips

Customers and workshops often find this part by searching the product codes 96866504ZD, 96866504D or 4112PC together with vehicle model names (Citroën C4 Picasso, Grand Picasso). Use these identifiers when locating the correct driver airbag for first-generation C4 Picasso models up to 2011.

]]>