Direct-fit passenger seatbelt bracket designed for Citroën C1 and Peugeot 107 (first generation). This sturdy replacement bracket secures the seatbelt anchor point to the vehicle structure and restores correct belt routing and fixation after damage or wear. Ideal for professional workshops and skilled DIY enthusiasts who search by OE codes 8974LQ or 8976N7. The bracket is suitable for vehicles without a seatbelt alarm (no alarm sensor included).

Technical Information

• Manufacturer: Stellantis / Citroën / Peugeot
• Model: Citroën C1 (First Series), Peugeot 107 (First Series)
• Product Codes: 8974LQ, 8976N7
• Additional Numbers: Category Tags: 107 I, Airbags, Seatbelts, C1 and 107, C1 I, Interior

Installation Recommendations

• Prepare basic workshop tools: trim removers, torque wrench, appropriate sockets and screwdrivers.
• Remove necessary interior trim panels to access the original bracket mounting points. Keep fasteners and clips for reassembly or replace damaged ones.
• Unbolt the old bracket and compare the replacement to ensure identical mounting points and orientation.
• Install the new bracket and tighten bolts to the manufacturer’s torque specifications. If torque values are not available, refer to the vehicle repair manual.
• Verify correct belt routing, free movement of the retractor, and secure anchorage after installation.
• Safety Note: If The Vehicle Is Equipped With Seatbelt Pretensioners Or Pyrotechnic Components, Disconnect The Battery And Follow Manufacturer Safety Procedures Before Starting Work.

How Replacement Is Performed

Typical replacement requires removing interior trims to access the pillar or floor mounting point, unbolting the damaged bracket, fitting the new part in the same position and orientation, and reassembling trims. The operation is usually straightforward for experienced technicians and can be performed in a small workshop. Always check that the seatbelt moves smoothly and locks correctly during a quick pull test.

Most Common Failure Reasons

• Damage From Collision: Brackets Are Frequently Bent Or Cracked In Minor Or Major Accidents.
• Corrosion: Long-Term Exposure To Moisture Can Weaken The Metal Or Fasteners, Especially In Older Cars.
• Seized Or Stripped Fasteners: Rusted Bolts Can Fail During Use Or When Attempting Removal.
• Wear And Plastic Clip Fatigue: Trim Clips Or Small Plastic Components That Hold Routing May Break Over Time.

Searching By OE Code (8974LQ, 8976N7) Helps Quickly Find The Correct Part In Catalogs. After Installation, Always Perform A Visual Check And A Functional Test Of The Seatbelt To Ensure Passenger Safety.

High-quality replacement driver seat belt bracket designed for first-series Citroën C1 and Peugeot 107 models. This bracket secures the driver’s seat belt to the vehicle body and includes the seat-belt alarm/sensor version required for vehicles equipped with a seat-belt warning system. Direct-fit design and OEM product codes make it a practical choice for workshops and DIY mechanics looking for a reliable, safety-critical replacement part.

This part is commonly sought under product numbers 8974LR and 8976N8. It restores correct seat-belt anchoring and the seat-belt warning functionality, ensuring occupant safety and correct alarm operation.

Technical Information

• Manufacturer: Stellantis / Citroën / Peugeot
• Model: Citroën C1 (First Series), Peugeot 107 (First Series)
• Product Codes: 8974LR, 8976N8
• Additional Numbers: 8974 LR, 8976 N8 (common formatting variants)

Function And Application

The bracket anchors the driver seat belt to the vehicle body and commonly integrates or accommodates the buckle/sensor required by the seat-belt alarm system. Correct mounting maintains belt geometry for effective restraint in a crash and ensures the seat-belt warning circuit operates as intended.

How Replacement Is Performed

Replacement is straightforward for a trained mechanic or competent DIYer with basic tools. Typical steps:

• Park the vehicle on a level surface and engage the parking brake.
• Disconnect the battery to prevent accidental short circuits and to avoid triggering airbags or alarm systems.
• Remove interior trim panels and seat components as necessary to access the bracket.
• Disconnect any electrical connector for the seat-belt alarm sensor if present.
• Unbolt the old bracket from the body, remove it and fit the new bracket in the same orientation.
• Refit bolts and tighten to the Manufacturer’s torque specification.
• Reconnect any electrical connectors, reassemble trim and seats, reconnect the battery and verify seat-belt operation and alarm function.

Installation Recommendations

• Always Disconnect The Battery Before Starting Work To Reduce Risk Of Electrical Damage Or Airbag/Alarm Activation.
• Follow Manufacturer Torque Specifications When Tightening Mounting Bolts.
• Inspect Surrounding Structure For Corrosion Or Damage—Repair As Needed Before Fitting The New Bracket.
• After Installation, Check Seat-Belt Buckle Operation And Seat-Belt Warning Light/Alarm For Correct Function.
• If The Unit Includes A Sensor Connector, Ensure Connectors Are Clean And Secure To Avoid Intermittent Alarms.

Why This Part Fails Most Often

Common failure causes include corrosion of the mounting points (especially in older or salt-exposed vehicles), mechanical damage from collisions, wear or breakage of plastic components around the buckle/sensor, and electrical faults or corrosion in the sensor connector causing false alarms or loss of warning function. After an accident the bracket should always be inspected and replaced if deformed or cracked.

Why Buy This Part

Choosing the correct driver seat belt bracket with the seat-belt alarm option ensures a safe, direct replacement that restores both mechanical anchorage and the vehicle’s warning functionality. Ideal for professional workshops and experienced DIYers who need a reliable fit for Citroën C1 and Peugeot 107 first-series vehicles. Commonly searched by OE codes 8974LR and 8976N8 for quick identification.

Additional Notes

Replace any damaged fasteners with new bolts of the correct grade and length. If you are unsure about electrical connectors or alarm diagnostics, consult a professional with appropriate diagnostic equipment.

This left front pyrotechnic seat belt is suitable for Toyota Aygo models and is commonly compatible with platform siblings Citroën C1 and Peugeot 107. Identified by part codes 7P2170-P, 16084059XZ and B0009077XZ, the assembly includes a pyrotechnic pretensioner that activates in a collision to reduce occupant movement by removing slack from the belt. The unit is intended for the driver’s seat of 5-door vehicles up to the 2013 model year. Ideal for professional workshops and experienced DIY mechanics who search by part number or vehicle model when sourcing replacement safety components.

Technical Information

• Manufacturer: Stellantis / Toyota
• Model: Toyota Aygo (Up To 2013); Compatible With Citroën C1 And Peugeot 107
• Product Codes: 7P2170-P; 16084059XZ; B0009077XZ
• Other Numbers: 16084059XZ | 7P2170-P | B0009077XZ

Function And Application

The pyrotechnic seat belt combines the inertia reel and a pretensioner pyrotechnic charge. During a significant impact the pretensioner fires and retracts the belt instantly, improving occupant restraint and reducing forward movement. The mechanism is single-use: once the pyrotechnic element has activated during a collision it must be replaced. The belt assembly also contains sensors and electrical connectors that interface with the vehicle airbag/SRS system, so correct electrical reconnection and clearing of fault codes is essential after replacement.

Installation Recommendations

• Always Disconnect The Battery Before Working On The Seat Belt Or SRS Components And Observe Manufacturer Waiting Times To Allow System Capacitors To Discharge.
• Remove Interior Trim Panels Carefully To Access The Seat Belt Retractor And Anchor Points; Avoid Excessive Pulling On Wiring Harnesses.
• Unplug The Pretensioner Electrical Connector Using The Correct Release Method; Inspect Connectors For Corrosion Or Damage Before Reassembly.
• Fit The New Assembly Ensuring Correct Routing Of The Webbing And That All Bolts Are Tightened To The Vehicle Manufacturer’s Torque Specifications.
• After Installation, Use A Diagnostic Scanner To Check And Clear Any SRS Or Seat Belt Fault Codes; Confirm Proper Function Of The Belt Reminder System.
• If In Doubt, Have The Replacement Carried Out By A Qualified Technician With Appropriate Tools And Diagnostic Equipment.

Most Common Reasons For Failure

• Activation During A Collision — The Pyrotechnic Pretensioner Is Single-Use And Must Be Replaced After Deployment.
• Electrical Faults Or Damaged Connectors Causing Loss Of Signal To The SRS System.
• Mechanical Wear Or Contamination Of The Retractor Mechanism Leading To Poor Retraction Or Locking.
• Corrosion Of Mounting Points Or Connectors In Older Vehicles Or Those Exposed To Moisture.
• Physical Damage To Webbing From Sharp Objects, Heat Or Excessive UV Exposure.

Searches By Part Number (7P2170-P, 16084059XZ, B0009077XZ) Are Common — Use These Codes To Confirm Fitment Against The Vehicle Model And Year.

High-quality left front pyrotechnic seat belt (driver side) designed for Citroën C1 and Peugeot 107 (models produced up to 2013). This safety component integrates a pyrotechnic pretensioner to reduce occupant movement during a collision and works together with the vehicle’s SRS to improve crash protection. Ideal for professional workshops and experienced DIY mechanics looking for a direct-fit replacement by product code.

Technical Information

• Manufacturer: Stellantis / Citroën / Peugeot
• Model: Citroën C1, Peugeot 107 (Up to 2013)
• Product Codes: 7P2170-P, 8974LL, 8974LN
• Additional Numbers: 16084059XZ, B0009077XZ

Function

The pyrotechnic pretensioner tightens the seat belt webbing in the milliseconds after a crash is detected, removing slack and positioning the occupant optimally before the main restraint (airbag) deploys. It is a single‑action safety device: once deployed in an accident it must be replaced.

Compatibility And Fitment

Fits left front (driver) position on Citroën C1 and Peugeot 107 first‑generation vehicles produced up to 2013, for 5‑door body versions. Always verify the product code on the original part before installation; this listing corresponds to the codes shown in the technical information.

Replacement And Installation

General replacement steps (for experienced mechanics):

• Disconnect the vehicle battery and wait at least 10 minutes to reduce the risk of unintended SRS activation.
• Remove the interior trim panels to access the belt retractor and pretensioner mounting points.
• Unbolt and disconnect the pretensioner electrical connector and remove the old unit.
• Install the new unit in the original position, connect the electrical connector and secure all fasteners per factory guidelines.
• Use an SRS‑capable diagnostic tool to clear fault codes and verify correct operation of the restraint system after installation.

Installation Recommendations: Always follow the vehicle manufacturer’s workshop manual. Replace any damaged mounting hardware and use the correct torque values specified by the manufacturer. If you are not equipped with SRS diagnostic tools or unsure about the procedure, have the replacement performed by a qualified technician.

Why This Part Fails Most Often

• Deployment During A Collision: The most common and definitive reason for replacement is activation of the pyrotechnic pretensioner in an accident.
• Electrical Or Connector Damage: Corroded or damaged wiring and connectors can generate SRS faults that require unit replacement.
• Mechanical Wear Or Contamination: Debris, water ingress or severe wear in the retractor mechanism can impair belt function and necessitate replacement.
• Age And Environmental Effects: Long service life in harsh conditions can contribute to deterioration of components and connectors.

Safety And Disposal

Do not attempt to disassemble or modify a pyrotechnic pretensioner. Improper handling may cause injury. Dispose of deployed or damaged pretensioners according to local regulations for pyrotechnic or hazardous automotive components.

Notes For Professionals

This part is intended for professionals and competent DIYers familiar with SRS systems. Replacing a pyrotechnic pretensioner requires adherence to safety procedures and proper diagnostic verification to ensure the vehicle’s restraint system is fully operational after repair.

Looking for reliable and exactly fitting passenger airbag for your vehicle Toyota Aygo production flights 2005 to 2012 ? We are here to offer you an original part that will increase the safety of your car. This airbag is an ideal solution for replacing a worn or damaged airbag without costly modifications.

The airbag is a key part of the vehicle’s safety system that protects the passenger in the event of an accident. We offer a used but fully functional airbag that has undergone thorough inspection and is ready for installation. Secure yourself and your loved ones with this essential safety feature, which represents considerable savings compared to the new work.

The installation of this airbag is fast and simple, because it is an original part specially designed for models Toyota Aygo from 2005 to 2012. The mechanic or an experienced handy can do it within hours, saving you time and money.

Technical Information:
Manufacturer: Toyota
Model: Aygo
Product codes: 8216JW
Other numbers: 5bdagf07171415

Take advantage of our offer and improve the safety parameters of your vehicle with this quality and verified work. Our team of experts is available to answer any of your questions about this airbag. Get this indispensable safety feature today!

High-quality replacement right (front passenger) airbag designed for direct fitment in the dash of Citroën C1 and Peugeot 107 models that share platform parts with the Toyota Aygo. Supplied under part code 8216JW, this airbag restores occupant protection after deployment or damage and matches the original dashboard trim in Black Mistral finish. Ideal for professional workshops and experienced DIY mechanics who need a reliable, vehicle-specific passenger airbag.

Key Benefits

– Direct-fit unit for dashboard installation on compatible models; reduces repair time compared with universal solutions.
– Matches interior finish (Black Mistral) for discreet appearance after replacement.
– Supplied with the correct connector and mounting interface for vehicles using part code 8216JW.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Citroën C1, Peugeot 107, Toyota Aygo
• Product Codes: 8216JW
• Additional Numbers: N/A

Function And Notes

The passenger airbag is an occupant protection device that inflates in the event of a qualifying frontal impact to reduce the risk of head and chest injuries. It works together with the vehicle’s seat belt system and crash sensors. After deployment the airbag must be replaced; deployed units cannot be reused. The module includes the airbag cushion, housing and the connector interface for the vehicle wiring.

How To Replace (Overview)

Replacement of a passenger airbag requires care and adherence to safety procedures. Typical steps (for experienced technicians):

• Disconnect the negative battery terminal and wait at least 10 minutes to allow residual charge to dissipate.
• Remove trim pieces and glovebox as necessary to access the airbag module mounting points.
• Unbolt the airbag module carefully, release any locking clips and disconnect the airbag connector(s).
• Install the new airbag in reverse order, ensuring connectors are fully engaged and retaining clips are secure. Use the manufacturer’s recommended fastener torque values where specified.
• Reconnect the battery and perform any required system checks with proper diagnostic tools to clear fault codes and confirm the airbag system is operational.

Installation Recommendations

– Always follow vehicle manufacturer procedures and safety guidelines when working with supplementary restraint systems (SRS).
– Wear appropriate personal protective equipment. Handle airbags with the airbag cushion facing away from you.
– Use OEM fasteners or equivalent and the correct torque settings from factory documentation.
– After installation verify SRS warning lamp behavior with a suitable diagnostic tool; if the lamp remains on, diagnose and repair the fault before returning the vehicle to service.

Why This Part Fails Most Often

Passenger airbags typically require replacement for one of the following reasons:
– Deployment During A Collision: The most common reason—once deployed the module must be replaced.
– Physical Damage Or Impact To The Dashboard Area: Damage from accidents or severe interior impacts can compromise the module.
– Connector Or Wiring Damage: Corrosion, chafing or previous incorrect repairs can cause open circuits or short faults leading to SRS errors.
– Previous Improper Repair: Non-OEM repairs or incorrect reinstallation can prevent correct operation.

Compatibility And Fitment

This airbag corresponds to vehicles that use part code 8216JW and fits Citroën C1 and Peugeot 107 models sharing platform components with the Aygo. Always ensure the part code matches the vehicle’s required airbag part number prior to installation.

Important Safety Notice

Airbags are safety-critical components. Installation should be performed by qualified personnel. Always disconnect the battery before starting work and follow the vehicle manufacturer’s safety procedures to avoid accidental deployment and injury.

Looking for a reliable and quality spare part for your Citroën or Peugeot? With our airbags unit, designed for the Citroën C1 and Peugeot 107, you get a highly functional and proven solution. This unit is an ideal choice to increase the safety of your vehicle, thanks to its reliability and long -term durability. Choose intelligently with us and ensure peace of mind with a fully functional airbag system.

Technical Information:
Manufacturer: Dog
Model: Citroen C1, Peugeot 107
Product codes: 89170-0H010, 6546F5
Other numbers: product specifications correspond to the production and qualitative standards of the original parts.

When installing this unit of airbags, it is important to follow the correct procedures to ensure its full functionality and safety. Due to the nephony replacement of this unit as part of the normal maintenance of the vehicle, we recommend that you provide installation for a qualified car mechanic, which guarantees the correct installation. With valid product codes, you can easily find and identify that this is the right part designed for your vehicle.

This unit has been carefully tested to meet all requirements for safe use. It is fully compatible with selected Citroën and Peugeot models and has been designed to communicate without any problems with other car systems. Make sure your trips will be safer with our proven airbag unit.

Shop with us with confidence and guaranteed quality. Our spare parts for Citroën and Peugeot are carefully selected with respect to performance, safety and compatibility to always be safe on the road.

Compatibility: This seat belt is designed for 3-door versions of Citroën C1 and Peugeot 107 vehicles. It is important to replace worn or damaged seat belts to ensure optimal safety standards are met.

Functionality: The primary function of the seat belt is to restrain the occupant during sudden stops or collisions, reducing the risk of injury. Over time, wear and tear can occur due to regular usage, resulting in potential failure if not replaced. It is recommended to inspect seat belts regularly.

Replacement: Changing the seat belt is straightforward and typically involves removing the old seat belt assembly and installing the new one. Basic tools are usually required for the installation process.

Technical Information

• Manufacturer: PSA Citroën Peugeot
• Model: Citroën C1, Peugeot 107
• Product Codes: 7P2190-P, 8974LN
• Additional Numbers: 16084058XZ, B0009076XZ

Over time, seat belts can wear out due to regular use, exposure to sunlight, and environmental factors. This can lead to reduced performance and potential risks in an accident scenario. It’s recommended to replace seat belts every 10 years or after any significant impact.

To replace the seat belt in your vehicle, follow these steps:

1. Remove the lower cover trim around the seat belt anchor.
2. Unbolt the existing seat belt from its mounting point.
3. Install the new seat belt by bolting it to the same mounting point and securing the trim back in place.

Ensure the new seat belt is properly secured and functions correctly to maintain optimal safety.

Technical Information

• Manufacturer: PSA Groupe
• Model: Citroën C1, Peugeot 107
• Product Codes: 7P1190-P, 8974LK
• Other Numbers: Not applicable

This genuine replacement driver seat airbag is designed for early Citroën C1 and Peugeot 107 models (first series). It restores occupant restraint functionality after deployment or damage and fits into the seat structure in place of the original module. Ideal for professional workshops and experienced DIY mechanics searching by OE numbers 73920YV010 or 8216FK.

Benefits and Key Features

• Direct fit for compatible First Series Citroën C1 and Peugeot 107 models (up to 2013).
• OE Reference Numbers Included For Fast Search: 73920YV010, 8216FK.
• Designed To Interface With The Vehicle SRS Wiring Harness And Seat Structure.
• Slim design integrated into the seat cushion/backrest for correct deployment geometry.

How Replacement Is Performed

Replacing a seat airbag requires care and basic electrical diagnostic knowledge. Typical replacement steps performed by a professional or experienced DIY mechanic:

• Disconnect The Negative Battery Terminal And Wait At Least 10 Minutes To Allow Capacitors In The SRS System To Discharge.
• Move The Seat To Provide Access, Remove Seat Trim And Covers To Expose The Airbag Module.
• Unbolt The Airbag Module From The Seat Frame Using Appropriate Tools; Carefully Disconnect The SRS Connector.
• Install The New Airbag Module In Reverse Order, Ensuring Connectors Are Fully Seated And Locks Engaged.
• After Reconnection, Use An OBD/Diagnostic Tool To Check SRS Faults And Clear Airbag Codes; Verify System Status.

Installation Recommendations

• Always Disconnect The Battery Before Any Work On The Airbag System And Follow Manufacturer Safety Procedures.
• Do Not Probe, Short Or Tamper With Airbag Connectors; Handle Modules With The Inflatable Side Facing Away From You.
• Use A Suitable Diagnostic Tool To Read/Reset SRS Faults After Replacement. If Airbag Warning Light Persists, Recheck Connections And Wiring.
• Replace Any Fasteners Or Clips That Are Damaged; Ensure The Seat Is Reassembled Exactly As Original To Maintain Deployment Path.
• If The Vehicle Was Involved In A Collision, Inspect Seat Structure And Wiring For Hidden Damage Before Installing The New Module.

Reasons For Most Common Failures

• Deployment During A Collision — Airbags Must Be Replaced After Activation.
• Damage Or Corrosion Of Wiring And Connectors Causing Intermittent Or Permanent Faults.
• Physical Damage To The Seat Or Module From Improper Repairs Or Wear, Affecting Connector Integrity.
• Moisture Ingress Or Seat Cushion Damage Leading To Electrical Faults.
• SRS Control Unit Detecting Anomaly (Wiring, Connector, Or Internal Module Fault) — Requires Diagnostic Troubleshooting.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Citroën C1 (First Series) / Peugeot 107 (First Series) — Up To 2013
• Product Codes: 73920YV010
• Additional Numbers: 8216FK

Notes For Professionals And Enthusiasts

This airbag module is intended as a direct replacement for the specified first-series models. There Is No Standard Service Interval For Airbags — Replace When Deployed, Physically Damaged, Or When The SRS System Reports A Fault. Always Verify System Integrity With Proper Diagnostic Equipment After Installation.