Original airbag control unit (SRS/ECU) for Citroën C-Crosser and Peugeot 4007. These are used OEM part of disassembly, ideal as a replacement unit or piece blocked after the accident. The key match is the part number: 6546.Y6 / 6546Y6 and 8635A053 / P8635A053. This part in the dog is kept as NFP (no longer produced), so it is a suitable choice for maintaining older cars in operation.

Functions: Airbags control unit evaluates impact and side sensors’ signals, controls the airbags and activates the seat belt pretensioners. In the event of a failure or after an accident, the airbag indicator lights up and error codes remain in the unit memory; The car does not have to go through the MOT/ME.

Installation and commissioning: Always disconnect the negative pole of the battery before replacement and wait for at least 10 minutes. The unit is located on the center tunnel of the vehicle. After mechanical replacement, it is usually necessary to perform telecoding/configuration and diagnostic control (recommended using PSA Diabox/Lexia). In the case of a unit after an accident, the so -called crash data may be needed by a specialized workplace. For safety reasons, we recommend that you entrust the installation of professional service.

Typical defects: permanently illuminated airbag indicator, SRS stored errors, non -functional pretensioners, information about the blocked unit after the accident. In practice, it is most important to verify the match of the part number; Within one model series, there are variants according to the equipment (number of airbags, sensor type), so we recommend control against VIN and the original part.

technical information

• Manufacturer: PSA (Citroën / Peugeot)
• Model: Citroën C-Crosser; Peugeot 4007
• Product codes: 6546.Y6; 6546y6; 8635A053; P8635A053
• Other numbers: 6546 Y6; 8635 A053; NFP (no longer produced)

Why choose this part: the original quality of the OEM, accurate compatibility by codes, the availability of a part that is no longer delivered. Verify the part number of the part number on your old unit and get a reliable solution to re -operate the airbag system.

Looking for a reliable and quality spare part for your Citroën C-Crosser or Peugeot 4007? Airbag ring with product code 4112KZ is the ideal choice to restore full functionality of controls located under the steering wheel of your vehicle. This part is designed to ensure trouble -free communication between the steering wheel and the electronic systems of the car, which is essential for maintaining safety and comfort in driving.

Technical Information:
Manufacturer: Dog Group
Model: Suitable for Citroën C-Crosser and Peugeot 4007
Product codes: 4112Kz
Other numbers: n/a

The airbag ring is an essential part of the wiring of your car, responsible for the proper functioning of airbags and other safety systems. Its replacement is recommended if there is a failure of the signal between the controls on the steering wheel and other car systems. It is a part that may eventually be subject to wear or damage due to technical defects or ordinary wear. This particular type of airbag ring has already been used in the vehicle, but has been carefully tested and is fully functional, ready for installation and further use.

Looking for a reliable and safe airbag for your passenger to your Citroën C-Crosser or Peugeot 4007? We offer a passenger airbag used, which is supplied with the dashboard cover, which significantly makes installation easier and ensures that your vehicle will be quickly and safely ready to use again quickly and safely.

Airbags are a key element of passive vehicle safety and their functionality is essential for life protection in the event of an accident. This particular airbag model was carefully removed from the car and underwent control to ensure that its functionality is still at the highest level and is ready for immediate installation.

Technical Information:

• Manufacturer: Citroën Peugeot
• Model: Citroën C-Crosser, Peugeot 4007
• product codes: 608208100E, 608208100A, 7030A141XA, 4112KJ
• additional numbers: 8216rj

The warranty for used car parts is a matter of course for us, and therefore we provide functionality for this airbag. Read what our customers are saying about the quality of our products and services, and make sure buying from us is the right choice.

Remember that the correct installation of airbags is essential for your safety. It is recommended to have the installation to be carried out by a specialist service that has experience in assembling the airbags. This ensures that all the functions of your vehicle’s safety system will be fully functional.

Order a high-quality steering wheel airbag for Citroën C-Crosser, designed for the driver’s side. This part is essential to ensure the safety of the driver in the event of an accident and is immediately ready for assembly in your vehicle. Thanks to thorough inspection and testing, we guarantee that even though it is a part used, its functionality remains uncompressed. This airbag provides the same level of protection as new, but for a fraction of the price.

Technical information:

• Manufacturer: PSA Group (Citroën, Peugeot)
• Model: Citroën C-Crosser
• product codes: 608208100E, 608208100A, 7030A141XA, 4112KJ
• Additional numbers: 608208100E, 608208100A, 7030A141XA, 4112KJ

Simple review and replacement of this part means that you can repair your car without the need for a long waiting at the service. The airbag is an essential part of the vehicle’s safety systems and its proper functioning is essential for life protection in the event of a collision.

Due to the widely placed need for this part between the Citroën and Peugeot models, this airbag is also compatible with some Peugeot models, making it an excellent choice for a wide range of vehicles. In addition, by purchasing the used part, you contribute to sustainability and ecology by putting existing components re -entering and reducing the need to produce new parts.