Part description

Used driver seat belt lock holder for Peugeot 308 T9 (left front). It is a part from the area of ​​seat belts in the interior, which ensures the correct attachment and guidance of the belt lock so that the lock is always easily accessible and the belt works without snagging. A suitable solution for replacement after mechanical damage to the holder or in case of a defect caused by wear in the cabin.

Technical information

• Manufacturer: Stellantis – CITROEN PEUGEOT
• Model: Peugeot 308 T9
• Other numbers: not specified

Product codes

• Product codes: 96776837XT

Installation recommendations

• Please compare part number 96776837XT with the original component before assembly.
• Install on the left front side (driver) according to the original location and guide of the belt lock, so that there is no friction or snagging.
• After installation, check the smooth operation and position of the belt lock in the normal range of seat movement.

Reasons why the part is damaged

• Mechanical stress during frequent use (repeated on/off belt).
• Damage to plastic/grip parts due to careless handling or prying.
• Wear in the interior and play in the attachment, which will deteriorate the stability of the holder over time.
• Consequences of a collision or a sudden load on the seat belt.

Part description

The passenger seat belt lock holder for the Peugeot 308 T9 is an interior and seat belt part that ensures a secure fit of the seat belt lock on the right front (passenger side). A properly seated and undamaged holder is important for a stable position of the lock, convenient fastening of the belt and trouble-free functioning of the entire safety belt system.

It is also searched for by the product number 96776848XT, which will facilitate the exact identification of the part.

Technical information

• Manufacturer: Stellantis – CITROEN PEUGEOT
• Model: Peugeot 308 (308 T9)
• Other numbers: not specified

Product codes

• Product codes: 96776848XT

Installation recommendations

• Before assembly, compare the original part with the spare part (design, attachment and orientation for the right front seat/passenger).
• Check that there is no damage to the surrounding attachment in the interior and that the seat belt lock fits in the holder without play.
• After installation, check the function: smooth on/off of the belt and stable position of the lock during normal use.

Reasons why the part is damaged

• Mechanical stress during frequent use (prying, pulling the belt buckle, leaning on it).
• Incorrect assembly or tightening/fastening that leads to play and gradual squeezing of the fastening.
• Damage after an accident or a sudden jerk of the seat belt.
• Internal wear and vibrations that over time loosen the fit and increase the stress on the holder.

Part description

This right rear seat belt is intended for the Peugeot 308 T9 and belongs to a group of parts that directly affect the safety of the crew. Suitable as a replacement in case of damage to the original belt, malfunctioning winding or after intervention in the interior. The FXX (black) design will make it easier to maintain the original appearance of the interior.

Technical information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Peugeot 308 T9
• Other numbers: not specified
• Location: right rear (behind passenger)
• Design / color: FXX – black
• Category: Interior > Seat belts (Airbags)

Product codes

• Product codes: 96777232XX

Installation recommendations

• Before assembly, compare code 96777232XX with the original part and check the design match (right rear, FXX – black).
• Make sure that the belt is properly guided in the interior plastics and that the retractor runs smoothly without crossing the belt.
• After assembly, check function: smooth winding, blocking in the event of a sudden jerk and correct seating of the lock/handles.

Reasons why the part is damaged

• Mechanical damage to the belt (tearing, abrasion, fraying) due to improper routing or pinching in the lining.
• Reeler jamming after long-term use, dirt or after intervention in the interior.
• Damage after an accident or after activation of safety systems, where the belt may stop working properly.
• Wearing of the anchor points and fastening due to frequent handling of the rear seats.

Part description

Used left rear seat belt designed for Peugeot 308 T9. This is a belt on the rear left side behind the driver in FXX (black) design. A suitable solution for replacement after the activation of safety features, damage to the winding mechanism or when repairing the interior, where it is necessary to preserve the original specification and appearance.

Technical information

• Manufacturer: Stellantis – CITROEN PEUGEOT
• Model: Peugeot 308 T9
• Other numbers: not specified

Product codes

• Product codes: 96777230XX

Installation recommendations

• Please compare part number 96777230XX with the original belt on the car before installation.
• Check that the side (left rear behind driver) and FXX design – black fit.
• Pay attention to the correct positioning of the attachment and belt guide so that the belt winds smoothly and does not snag.
• After assembly, verify the function: smooth unwinding/rewinding and proper arresting when jerking.

Reasons why the part is damaged

• Accident or sudden overload – after activating the safety features, the belt may remain blocked.
• Clogging of the mechanism (dust, dirt) and subsequent impaired winding.
• Wear during long-term use – stuttering, slow winding.
• Damage to the webbing (abrasions, scratches) due to pinching or rubbing against the plastic line.
• Incorrect handling during disassembly/assembly of the interior – damage to fasteners or covers.

Main product description

Driver airbag for the steering wheel for Peugeot 308 II (T9), original PSA part with number 96783105ZD. This is a used, non-activated airbag from disassembly, intended for replacing a defective or fired module in the steering wheel. Thanks to the OEM number 96783105ZD, you can easily verify compatibility – we recommend comparing directly with the number on your original part or verifying by VIN.

Key features
– Original PSA part (Peugeot/Citroën) – OEM: 96783105ZD
– Designed for: Peugeot 308 T9 (II generation, according to equipment and type of steering wheel)
– Location: driver’s airbag – module to the center of the steering wheel (SRS)
– Condition: used, not activated, without mechanical damage to the cover (see photo)
– Connection: standard PSA connector for the driver’s airbag – check the connector type and color on the photos
– Manufacturer: according to the label on the part (usually PSA/partner supplier); please refer to the photo

Technical information and compatibility
– Function: driver’s safety airbag (SRS) – the module contains a pyrotechnic unit and a bag with a front cover
– Body/types: 308 T9 Hatchback/SW; kompatibilita se může lišit podle typu volantu (množství ramen, přítomnost multifunkčních tlačítek, design krytu)
– Electrics: matching impedance/interface for 308 T9 model series; always compare the connector and the part code
– Color and finish: black airbag cover with Peugeot logo (shade and texture may vary depending on equipment and year of manufacture)

What is included
– Driver airbag module 96783105ZD
– Excludes: steering wheel, spiral cable wiring (clockspring/COM200x), buttons, screws – use original or order separately

Why choose this part?
– Original design and exact compatibility for 308 T9
– Cost savings compared to a new part while maintaining functionality
– Searchable by OEM number 96783105ZD – quick and sure to find the right part

Installation recommendations and safety
– The airbag is a pyrotechnic safety element – entrust installation to a qualified auto mechanic.
– Before work, always follow the vehicle manufacturer’s safety procedures (e.g. disconnect the battery and wait the prescribed time).
– After installation, check with the SRS diagnostics that there are no error codes.

How to verify the correctness of the part
– Compare the number 96783105ZD on your old airbag with the label of the offered piece.
– Verify the shape and fit of the cover and the type of connector according to the photos.
– If in doubt, send us the VIN – we will verify compatibility.

Note
– The used part may have small aesthetic traces of use that do not affect the function.
– Shipment and transport of airbags is subject to special conditions for pyrotechnic components; available delivery methods may vary depending on your location.

Search keywords for easy finding
– Peugeot 308 T9 driver’s airbag
– airbag for the steering wheel 308 II
– Peugeot driver’s SRS module
– OEM 96783105ZD, PSA 96783105ZD

Original passenger airbag for the dashboard for Peugeot 308 II (T9), OE number 9677848780. Used, complete SRS module designed to be installed from the inside of the dashboard – an ideal replacement when repairing after an accident or when solving errors in the airbag system.

Main advantages
– Original PSA part – correct geometry and compatibility with 308 T9
– Ready to mount in the dashboard (no dashboard/dash panel)
– Solving SRS errors and restoring vehicle safety systems

Technical information
– Location: passenger (right side), dashboard airbag
– Model: Peugeot 308 T9 (308 II)
– Years of compatibility: approx. 2013-2021 (hatchback and SW) – always check by VIN
– OE/OEM number: 9677848780 (PSA/Citroën/Peugeot)
– Connection: yellow airbag connector/connectors depending on the car’s equipment
– Condition: used original part, without dashboard and decorations; visually check fitment shape and connectors against your original part
– Note: the cover “lid” is part of the dashboard, not the airbag module

Compatibility and Verification
– Primarily for Peugeot 308 T9. Before you buy, compare:
– OE number (9677848780) with the number on your original airbag
– the shape of the body of the module and the location of the handles
– type and number of connectors
– In case of uncertainty, we recommend checking compatibility according to the VIN (diagnosis DIAGBOX/Service Box).

Installation and safety
– Installation may only be performed by a qualified technician. Always disconnect the battery and wait at least 10-15 minutes before working.
– Do not connect an ohmmeter or other measuring devices to the pyrotechnic circuits of the airbag.
– After assembly, erase any SRS error codes and perform a diagnostic check.

Who is the piece intended for?
– Garages, body shops and home mechanics who need a quick and safe replacement of the original passenger airbag for the 308 T9.

Search Terms (SEO)
– passenger airbag Peugeot 308 T9
– dashboard airbag 308 II
– Peugeot 308 passenger airbag
– 9677848780 Peugeot airbag

Final tip: The fastest way to be sure of the correct part is to match the OE number 9677848780 to your original module and verify by VIN.

Original side curtain airbag (head/”curtain”) – right side – for Peugeot 308 T9. This is a used, fully functional part from disassembly, suitable as a replacement for an activated or damaged airbag. Also wanted under OEM number 9805768380 (PSA).

Key information
– OEM/PSA number: 9805768380 (entry variant: 98 057 683 80)
– Location: right side of the vehicle (passenger), in the ceiling space under the upholstery, along the pillars A–B–C
– Part type: side ceiling/head curtain airbag (IC)
– Vehicle: Peugeot 308 T9 (2013-2021; hatchback/ SW) – check with VIN and part number, bodywork may vary
– Manufacturer: original PSA (Peugeot/Citroën)
– Condition: used part from disassembly, not activated; completeness, connectors and holders according to current photos

Why choose this part?
– Original fit and compatibility with your car’s SRS system
– A cost-effective solution compared to a new part
– Quick identification by OEM number 9805768380 – ideal for auto mechanics and home repairs

Technical and assembly notes
– This is a pyrotechnic safety component – requires professional handling.
– Always disconnect the battery and carry out SRS diagnostics before assembly; clear any error codes after replacement.
– Install only on cars for which the same part code is intended; do not combine with other airbag designs.
– Check the compatibility of the connectors and holders with your car (see photo).
– Professional installation and checking of tightening of all fixing points according to the manufacturer is recommended.

Typical use
– Compensation after airbag activation in an accident
– Repair of damage to the ceiling airbag or its wiring/mounts

Search and SEO keywords
Peugeot 308 T9 ceiling airbag right, head airbag right 308 T9, side curtain airbag 9805768380, PSA airbag right 308, SRS curtain airbag Peugeot 308 T9.

Warning
– Always verify compatibility by VIN and OEM number.
– Airbags are dangerous components – store and transport according to regulations, do not heat or disassemble.

Original side seat airbag – right side (passenger) for Peugeot 308 II (T9). This is a used, genuine disassembly part with PSA/OEM number 9805583880, suitable for professional SRS repairs as well as experienced home mechanics. Thanks to the exact fit and matching part number, the assembly and pairing with the vehicle requires no additional modifications.

Key benefits
– Original PSA part – assurance of compatibility and quality
– Precise seating in the seat, no modifications to the holders or covers
– Significant savings compared to a new part and environmental friendliness
– Easy to find by part number 9805583880

Technical information
– Location: right side of the vehicle (passenger), side airbag integrated in the seat back
– Model: Peugeot 308 II (T9)
– Vehicle years: approximately 2013-2021 (verify by VIN and seat type)
– System: SRS – side chest protection
– Part number (OEM/PSA): 9805583880
– Connector: original SRS (typically yellow design; compare according to the photo and the connector in your car)
– Attachment: specific for the given type of seat (standard/sport); compare the shape of cartridges, brackets and wiring before ordering

Compatibility
– Designed for Peugeot 308 T9 (hatchback/SW). Always confirm compatibility by matching part number 9805583880 or by VIN. If the seat type or connector is different, the part may not fit.

Condition and origin
– Used original part from disassembly. Check the condition and design according to the photos in the product gallery. For the safe operation of the SRS, it is necessary to install only non-activated airbags in perfect condition.

Installation recommendations
– Installation may only be carried out by a qualified person.
– Before working, disconnect the battery and wait at least 10-15 minutes.
– Do not use testers that can inject current into the circuit.
– After assembly, use diagnostics (DiagBox/Lexia) to clear errors and check resistance values, or update the SRS configuration.
– Check the correct wiring and securing of the connector.

Note on transport
– The airbag is a pyrotechnic component – transportation is subject to legislative restrictions. Available shipping methods and delivery areas may vary; verify when ordering.

Searching by part number?
– PSA/OEM: 9805583880
– Also enter the number in the e-shop search or when verifying compatibility by VIN.

Keywords (SEO)
– seat airbag right Peugeot 308 T9, side airbag passenger seat, SRS airbag 9805583880, original used part Peugeot 308 II, airbag for seat right PSA

This description will help you quickly verify compliance and safely complete the repair. If you are unsure about compatibility, please contact us with the VIN code for verification.