Original passenger airbag for Peugeot 206 in HZR interior design – Astrakan gray. This is a part produced by PSA, intended as a direct replacement according to the code 8226.TS / 9683503180. An ideal solution for replacement after airbag activation, SRS error messages or when repairing the instrument panel, when it is necessary to maintain the correct shape and color matching with the dashboard.

Thanks to identical product codes, you get an exact fit in the original mounts, correct compatibility with the airbag unit and a clean interior without compromises. Compared to universal replacements, the original module is prepared for the electrical installation of the Peugeot 206 and corresponds to the structure and shape of the dashboard, including the airbag cover.

Function: The passenger airbag is a key part of the SRS system, which protects the passenger in an impact by limiting the impact to the dashboard. In the case of these cars, the reason for replacement is mainly activation during an accident or a permanent “squib passenger”/”airbag passenger circuit” error. The correct replacement according to the part number is essential for faultless operation and for the airbag warning light to go off after diagnosis.

Installation recommendation: Always disconnect the battery before any intervention and wait at least 10-15 minutes for the capacities in the SRS system to discharge. Disassembly and assembly usually takes place from the side away from the passenger compartment; the airbag is attached with screws from the back of the dashboard. Handle the module with care, never measure the resistance of the igniter with a regular multimeter. After installation, it is necessary to diagnose and delete SRS memory errors (e.g. using Peugeot Planet/DiagBox). Entrust installation to a qualified mechanic.

Always check compatibility with the part number and interior code HZR (Astrakan Grey), which ensures a perfect visual match with the Peugeot 206 dashboard. Due to the end of production (NFP), this part is a suitable choice to keep the car running with original components for a long time.

Technical Information
Manufacturer: PSA Peugeot Citroën
Model: Peugeot 206 (verify the match according to VIN and HZR interior color – Astrakan gray)
Product codes: 8226.TS, 9683503180
Other numbers: NFP (No Further Production)

Selection tip: If you are not sure about the match, compare the numbers directly on the original airbag label or send us the VIN – this will avoid incompatibility and unnecessary assembly/disassembly costs.

Product Overview

Used driver’s steering wheel airbag designed for Peugeot 206. This original-equipment airbag unit (part numbers 96441166ZR / 4112FW) is a direct replacement for vehicles with matching steering wheel trim and connector. Ideal for professional workshops and DIY mechanics who search parts by product code — including searches for 96441166ZR and 4112FW.

Function

The driver airbag is a primary component of the Supplemental Restraint System (SRS). In the event of a qualifying frontal impact, the module rapidly inflates to reduce driver injury by cushioning the head and chest and working together with the seat belt. The airbag assembly contains the inflator, cushion, and the electrical connector that interfaces with the vehicle SRS wiring.

Fitment

Fits Peugeot 206 models with the corresponding steering wheel and airbag connector. Common body variants include Hatchback, SW (Station Wagon) and CC (Coupe Cabriolet). Compatibility typically depends on steering wheel design and color code (HZR – Gray Astrakan). Many customers locate this part by the product codes 96441166ZR and 4112FW.

Installation Recommendations

Replacing a steering wheel airbag requires care and respect for SRS safety procedures. Follow these recommended steps:

• Disconnect the negative battery terminal and wait at least 10–15 minutes to allow the SRS capacitors to discharge.
• Remove steering wheel covers or trim to access airbag retaining fasteners (usually Torx or bolts behind trims).
• Carefully unfasten the airbag unit and disconnect the electrical connector(s). Note the connector locking tab and orientation.
• Handle the removed airbag with the pad facing upward and store it away from heat sources or electrical equipment.
• Install the new unit by reconnecting the electrical connector(s), secure the retaining fasteners to the manufacturer torque specification, and reassemble trims.
• Reconnect the battery and verify SRS warning lamp behavior. If the SRS lamp remains lit, diagnose the fault with appropriate diagnostic equipment.

Because airbag work affects vehicle safety, use proper tools and follow the vehicle manufacturer’s service manual. If unsure about procedures or fault diagnosis, seek a qualified technician.

Most Common Causes Of Failure

Driver airbag failures or removals typically result from:

• Deployment in a collision (airbag must be replaced after deployment).
• Electrical faults such as damaged wiring, corroded connectors or poor contact at the clock spring (spiral cable) which can stop the inflator circuit from working or trigger SRS warnings.
• Clock spring wear or failure causing intermittent contact to the airbag circuit.
• Physical damage to the airbag pad or connector during previous repairs or improper handling.

Technical Information

• Manufacturer: Stellantis (Peugeot)
• Model: Peugeot 206
• Product Codes: 96441166ZR, 4112FW
• Additional Numbers: 4112FW (alternate marking)
• Color: HZR – Gray Astrakan
• Location: Driver Airbag, Steering Wheel

Dear automotive enthusiasts, especially owners and services of Peugeot vehicles, we present to you a high-quality used Passenger Airbag specifically designed for the Peugeot 206+. This airbag is an essential component that increases the safety of passengers in the event of a collision. Its installation is quite simple and can be performed with standard tools, which is appreciated by both professional mechanics and experienced DIYers.

Since this is a used part, we recommend visually inspecting its condition and the functionality of the ignition mechanism before installation to ensure its reliability in emergency situations. The combination of the black “MISTRAL” color will also complement the interior of your vehicle, enhancing the dashboard elements.

Technical Information:

• Manufacturer: PSA PEUGEOT CITROEN
• Model: Peugeot 206+
• Product Codes: 9683503180, 8226XP
• Other Numbers: NFP

This airbag is designed to provide maximum protection for the passenger. Its proper function is crucial for ensuring the safety of your trips. Do not forget that regular inspection and timely replacement of airbag systems can significantly contribute to the safety of all passengers. This part is an ideal choice for those seeking quality at an affordable price while ensuring the highest possible safety.

Over time, airbag systems may become less effective due to wear and tear or electrical issues, leading to potential safety risks. Regular inspection and timely replacement of the airbag is crucial for maintaining optimal safety standards in your vehicle. This airbag deploys in an emergency, reducing injury risks for the front passenger.

Replacement of the passenger seat airbag typically involves the following steps: disconnecting the vehicle battery, removing the seat, and carefully replacing the airbag module itself. It’s advisable to have a professional mechanic carry out this task to ensure safety and compliance with regulations.

Technical Information

• Manufacturer: Peugeot
• Model: 206
• Product Codes: 96498617YK, 94597648YK, 8216P1
• Additional Numbers: NFP

This driver seat airbag is intended for mechanic workshops and competent DIY enthusiasts servicing Peugeot 206 vehicles. The part is commonly searched by OE codes 96498618ZR and 8216P2 and is compatible with standard Peugeot 206 seating assemblies. Use this listing to quickly identify the correct module by part number and to get practical installation and troubleshooting guidance.

Product Overview

The driver seat airbag module is a critical component of the occupant restraint system (SRS). It sits inside the driver’s seat and is designed to deploy in the event of a crash to reduce occupant injury. This module includes the airbag cushion and housing; electrical wiring or seat loom may not be supplied, so verify connector type and length before installation. Suitable for Peugeot 206 applications where OE numbers 96498618ZR or 8216P2 are specified.

How It Works

On detection of a severe impact, the vehicle’s airbag control unit (ACU) triggers the squib in the seat airbag. The squib ignites a gas generator, inflating the cushion to provide a protective barrier between the occupant and hard interior surfaces. After deployment the module must be replaced—deployed airbags cannot be reused.

How To Replace

• Park vehicle on level surface, set parking brake and follow manufacturer safety precautions.
• Disconnect the negative battery terminal and wait the manufacturer-recommended time before working on the SRS system (at least 10 minutes is commonly advised).
• Remove seat trim panels as required to access the airbag module fasteners. In many Peugeot 206 variants the airbag is secured to the seat frame with accessible bolts; retain and inspect fasteners and clips.
• Carefully disconnect the airbag connector(s). Note orientation and locking tabs; damaged connectors must be repaired or replaced.
• Unbolt and remove the old airbag module. Fit the replacement unit ensuring correct alignment and seating of the cushion inside the cover.
• Reconnect the wiring harness, reinstall seat trim and fasteners, and reconnect the battery.
• Use a diagnostic tool to read and clear SRS fault codes. If the airbag lamp remains lit, further diagnosis with a compatible scanner is required.

Installation Recommendations

• Always follow the vehicle manufacturer’s service manual for removal and installation procedures.
• Disconnect the battery and observe the recommended waiting time to avoid accidental deployment.
• Handle the airbag module with the trim side facing away from you and avoid exposure to static or impact.
• Do not reuse a deployed airbag or damaged squib assemblies. Replace any damaged wiring or connectors rather than attempting repairs that do not meet factory standards.
• After replacement, perform a full SRS system scan and clear codes. Confirm lamp extinguishes and run any required initialization procedures per Peugeot service documentation.

Most Common Failure Reasons

• Deployment During A Collision: Airbags are single-use and must be replaced after deployment.
• Connector Or Wiring Damage: Seat movement, corrosion or previous repairs can damage wiring and cause SRS faults.
• Water Or Moisture Ingress: Moisture can corrode contacts and lead to intermittent faults or complete failures.
• Physical Damage To Module Or Trim: Impact or improper removal can damage the cushion or housing.
• Electrical Faults In SRS System: Faulty sensors, ACU issues or poor grounding can prevent correct operation and trigger warning indicators.

Technical Information

• Manufacturer: Stellantis / Peugeot
• Model: Peugeot 206
• Product Codes: 96498618ZR, 8216P2
• Additional Numbers: NFP (as listed)

Note: Cable/wiring may not be included with the module—verify connector type and loom length before purchase. Replacement should be performed or verified with appropriate SRS diagnostic equipment if you are not fully confident in the procedure.

This seat-mounted passenger airbag is designed for use in Peugeot 206 vehicles and is identified by product codes 96498617ZR and 8216P3. It provides an immediate supplemental restraint in qualifying impacts and is a direct-replacement style module intended for professional or experienced DIY fitting. The part is commonly sought by mechanics under the OEM reference numbers listed above, making it easy to locate in catalogs and search engines.

Technical Information

• Manufacturer: Stellantis / Peugeot
• Model: Peugeot 206
• Product Codes: 96498617ZR, 8216P3
• Additional Numbers: NFP
• Color: HZR – Gray Astrakhan

Function

The module is an integral part of the vehicle SRS (Supplemental Restraint System). In the event of a qualifying collision, the airbag inflates to reduce passenger movement and distribute impact forces, lowering the risk of serious injury. The unit works together with crash sensors, seat occupancy detection, seatbelt pretensioners and the airbag control unit to ensure correct deployment timing and intensity.

How To Replace

General replacement steps (for trained technicians or experienced DIYers):

• Disconnect the negative battery terminal and wait at least 10 minutes to allow SRS capacitors to discharge.
• Remove the front passenger seat from its mountings to access the airbag module (follow vehicle manufacturer removal points).
• Carefully disconnect the airbag connector(s). Note that the cable may not be supplied with the module; verify connector condition before installation.
• Unbolt and remove the old airbag module, install the new unit in the correct orientation and torque fasteners to OEM values.
• Reconnect the airbag connector(s), reinstall the seat, reconnect the battery and clear any SRS fault codes with an appropriate diagnostic tool.

Installation Recommendations

Always follow manufacturer procedures and torque specifications. Before starting, disable the battery and wait to avoid accidental deployment. Handle the module by its housing and avoid impact, exposure to heat or electrical shorts. Use a diagnostic scanner to confirm the SRS system is operational and to reset fault codes after installation. If you are not experienced with airbag systems, have the replacement performed by a qualified technician.

Most Common Cause Of Failure

Airbag modules are most often replaced after deployment in a collision. Other frequent causes of malfunction include damaged or corroded wiring and connectors under the seat, water ingress, and faults in the seat occupancy or sensor circuits that trigger SRS warnings. Physical damage to the module or prolonged exposure to moisture and contaminants can also lead to failure.

Compatibility Notes

This module is intended for Peugeot 206 applications. Verify the product codes 96498617ZR and 8216P3 when searching to ensure correct fitment for the specific vehicle variant and production year. Remember that the cable may not be supplied with the module; inspect the vehicle-side wiring and connector before installation.

Description

This genuine replacement passenger airbag is designed for Peugeot 206 models. It Provides Occupant Protection In Side And Frontal Collisions By Rapid Inflation During A Severe Impact. The Unit Comes In Grey (HZR – Astrakan) Finish And Is Fitted With Two Igniters (Two Squibs) For Reliable Deployment Performance.

Who Should Buy This Part

Intended Primarily For Professional Auto Technicians And Experienced DIY Enthusiasts Working On Peugeot 206 Vehicles. Frequently Searched By Its OEM Part Numbers, This Item Is Suitable For Repairs After Deployment, Dashboard Damage, Or When The Airbag Assembly Shows Electrical Faults.

Function And Benefits

• Primary Function: Rapidly Inflate To Cushion The Front Passenger In A Collision, Reducing Risk Of Injury.
• Two Igniters: Provides Reliable Initiation Of The Inflation Sequence; Common In Many OEM Passenger Modules.
• OEM Fitment: Designed To Match Mounting Points And Electrical Connections Of The Original Peugeot 206 Passenger Airbag.
• Appearance: Grey Astrakan Cover To Match Standard Dash Trims On Relevant 206 Interiors.

How Replacement Is Performed

Replacement Should Be Carried Out Carefully Following Safety Procedures. Typical Steps Include:

• Disconnect The Battery And Wait The Manufacturer-Specified Time To Allow The SRS System To Fully Discharge.
• Remove Dash Trim Panels To Access The Passenger Airbag Module Retaining Bolts.
• Unplug The Airbag Connector(s) And Remove The Module From Its Mounting.
• Install The New Module, Secure All Fasteners To The Correct Torque, And Reconnect The Electrical Connectors.
• Use A Diagnostic Tool To Clear Airbag Fault Codes And Confirm System Readiness.

Installation Recommendations

Always Follow Manufacturer Safety Instructions When Working On SRS Components. Before Any Work, Disconnect The Battery And Wait The Recommended Time To Prevent Accidental Deployment. Use Correct Tools And Torque Values For Mounting Bolts. After Replacement, Verify The System With A Proper Diagnostics Tool To Ensure No Faults Remain And The Airbag Light Is Extinguished. If You Are Not Fully Confident, Have The Replacement Performed By A Qualified Technician.

Why This Part Fails Most Often

• Deployment During A Collision – The Most Common Cause; Once Deployed, The Airbag Module Must Be Replaced.
• Electrical Damage Or Corrosion At Connectors Leading To Open Or Short Circuits And SRS Faults.
• Physical Damage To The Dashboard Or Mounting Points From Impact Or Moisture Ingress.
• Previous Improper Repairs Or Incorrectly Handled Modules That Compromise The Igniters Or Wiring.

Technical Information

• Manufacturer: Stellantis (Citroën/Peugeot)
• Model: Peugeot 206
• Product Codes: 9642928880, 8220WY, NFP
• Additional Numbers: —

Safety Notes

Airbags Are Pyrotechnic Safety Devices. Handle With Extreme Care. Never Attempt Repairs On The Inflator Or Igniters. Always Disconnect The Battery Before Service And Observe Anti-Static And Manufacturer Precautions. After Installation, Confirm Proper System Operation With A Diagnostic Tool.

High-quality replacement driver’s seat side airbag designed for Peugeot 206 models equipped with seat-mounted side airbags. This unit restores the vehicle’s passive safety system after deployment or electrical failure. It is commonly searched by part numbers 96498618YK, 94597649YK and 8216P0 — include these codes when looking up fitment. The Grey Cachemire trim ensures a discreet visual match with original interior upholstery on compatible vehicles.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Peugeot 206
• Product Codes: 96498618YK, 94597649YK, 8216P0
• Other Numbers: NFP

Function And Fitment

This is a seat-mounted side airbag intended for the driver’s seat. Its primary function is to provide lateral protection in a side impact by deploying rapidly when instructed by the vehicle’s SRS (Supplemental Restraint System) control unit. The part is intended for Peugeot 206 variants factory-equipped with seat side airbags; fitment must match the vehicle’s original seat trim and connector layout. Color: Grey Cachemire (HYK) to match interior upholstery on applicable trims.

Replacement Procedure

Basic replacement steps (general guidance):

• Disconnect the vehicle battery (negative terminal) and wait the recommended time for the SRS capacitors to discharge (follow manufacturer guidance) before starting work.
• Adjust or remove the seat to access fasteners and electrical connectors. In many cases you must unbolt the seat from the rails to gain full access.
• Carefully disconnect the airbag electrical connector(s) located beneath the seat; note connector orientation and locking clips.
• Remove the old airbag module from the seat frame and install the replacement, ensuring correct alignment and secure fastening.
• Reconnect connectors, torque seat mounting bolts to manufacturer specifications, and reconnect the battery. Verify SRS warning lamp behaviour; a persistent SRS warning requires diagnostic reading by a qualified technician.

Why This Part Most Often Fails

• Deployment During A Collision: Airbags are single-use devices and must be replaced after deployment.
• Electrical Faults Or Connector Damage: Corrosion, broken pins, or damaged wiring under the seat can interrupt the circuit and render the module non-functional.
• Mechanical Damage Or Wear: Physical damage to the seat structure or airbag housing from previous repairs or accidents can compromise the unit.
• Moisture Ingress: Exposure to moisture from spills or leaks can corrode contacts or sensors associated with the airbag circuit.

Installation Recommendations

• Always follow Peugeot/Stellantis service procedures and safety precautions when working on SRS components.
• Disconnect the battery and allow the specified discharge time before touching airbag connectors.
• Use appropriate tools and observe correct connector engagement; damaged connectors should be replaced rather than repaired with temporary fixes.
• After replacement, check the SRS warning lamp and, if necessary, read fault codes with a compatible diagnostic tool to confirm system readiness.
• If you are not experienced with SRS systems, have the replacement performed or verified by a professional technician.

Part numbers: 96498618YK / 94597649YK / 8216P0 ensure correct lookup and faster identification in inventory systems. This airbag is intended only for vehicles originally equipped with the corresponding seat-mounted side airbag option.

This airbag is compatible with various Peugeot 206 models, making it an essential part for vehicle repair and maintenance. It is identified by part numbers 96380421ZR and 8220NR, which are important for ensuring you are getting the right fit for your vehicle.

Regular replacement of airbags is vital, as they can deteriorate over time or after deployment. Check your vehicle’s service manual for guidelines on when to replace the airbag to maintain optimal safety standards.

When replacing an airbag, it is recommended to follow proper protocols to ensure safety and functionality. Installation should ideally be performed by qualified professionals to avoid any issues that may arise from improper handling.

Technical Information

• Manufacturer: Peugeot
• Model: 206
• Product Codes: 96380421ZR, 8220NR
• Other Numbers: N/A

This airbag, part number 96257484ZR, is crucial for driver protection in the event of a collision. It is recommended to replace airbags if they have been deployed or if the vehicle has been involved in an accident. Regular inspections are advised to ensure functionality.

To replace the driver airbag, ensure the vehicle is turned off and the battery is disconnected to avoid accidental deployment. Access the airbag through the steering wheel, remove the securing screws, and disconnect the electrical connector to replace it safely.

Technical Information:

• Manufacturer: PSA Group
• Model: Peugeot 206
• Product Codes: 96257484ZR
• Additional Numbers: Not Applicable

This product is perfect for both professional mechanics and DIY enthusiasts looking to improve the safety features of their Peugeot 206.