Gear shift rods (cables) for Citroën C1 and Peugeot 107 cars are a key part of manual transmission control. They transmit the movement of the gear lever to the shift mechanism on the transmission, so they have a direct effect on the accuracy, ease and certainty of shifting gears. Product numbers are often used in searches, so we list them below in the description.

The part is intended for PSA group cars and is typically used for problems such as difficult shifting, inaccurate shift lever guidance, a problem with engaging some gears or a “rubbery”/unclear shift action.

Technical information:
Manufacturer: PSA (Citroën / Peugeot)
Model: Citroën C1, Peugeot 107
Product codes: 3820-0H010, 2444AT
Other numbers: 1637133880
Part Type: Shift Rods / Shift Cables (Transmission Control)
Purpose: manual shifting (shift mechanism)

Installation recommendations:
– Before assembly, compare the design of cable guides and terminations (grips/joints) with the original part, including routing and length.
– Check the condition of the ball pins, bushings and holders on the transmission and on the shift lever; an excessively squeezed bearing can cause inaccurate shifting even after the rods have been replaced.
– Make sure the cables are routed correctly without sharp bends and without contact with hot parts (exhaust, catalytic converter) or moving parts.
– After assembly, verify smooth shifting of all gears with the engine off and running; if part of the adjustment system, perform it according to the procedure for the type.

The reason why the part most often goes wrong:
The most common cause is wear and play in the joints/ends of the tie rods, possibly stiffening or damage to the cable due to dirt and corrosion. The problem can also be accelerated by incorrect routing of the tie rod (breakage, friction) or long-term stress when shifting “over resistance” (e.g. with a faulty clutch or poorly adjusted shifting).

Looking for a reliable and high -quality gear mechanism for your Citroën C1 or Peugeot 107? Introducing a shift machine that is the ideal choice for those who prefer efficiency and quality. This part was carefully dismantled and its functionality was thoroughly verified to ensure the smooth operation of your vehicle.

This shift slot machine not only provides smooth and accurate shifting, but is also equipped with a speed sensor, which increases shifting efficiency and contributes to a better vehicle response while driving. The use of this part is particularly suitable for drivers who expect reliability and long -term endurance components.

Technical Information:
Manufacturer: Citroën, Peugeot
Model: Citroën C1, Peugeot 107
Product codes: 89451-52020, 89451-52021
Other numbers: 1612500880, 1608025580, 241065, 217706

Our shift machine for the Citroën C1 and the Peugeot 107 is built to withstand the demanding conditions of normal operation and frequent use. Thanks to compatibility with the models and the inclusion of speed sensor, this part represents an excellent investment for every car mechanic or a home handyman who wants to keep his vehicle in optimal condition.

If you need more information about installation or functionality, do not hesitate to contact us. Our experts are available to you to help you with any question or request to our products. Add this part to your basket today and make sure your Citroën C1 or Peugeot 107 will function as new.

Equip your Citroën C1 or Peugeot 107 with a high-quality gear shift gate designed to enhance your vehicle’s performance and driving comfort. This carefully selected used part offers a reliable and affordable solution to restore your car’s shifting functionality.

Ideal for both professional mechanics and car enthusiasts performing DIY repairs, this gear shift gate is frequently sought after for older generation Citroën C1 and Peugeot 107 vehicles due to wear caused by regular use. Replacing this component can significantly improve shifting accuracy and smoothness, enhancing overall safety and driving comfort.

Technical Information:

Manufacturer: OEM for Citroën and Peugeot vehicles
Model: Citroën C1, Peugeot 107
Product Codes: 33530-0H020, 33530-0H010, 2400AG
Additional Numbers: 33530-0H020, 33530-0H010

This part is ready for installation and can be fitted using standard tools, without the need for specialized equipment. Thanks to its solid construction and verified origin, it represents an excellent choice for those looking for a reliable, cost-effective repair solution. Make your vehicle shift like new again with our Gear Shift Gate!

The Gear Position Indicator for automatic transmission is designed specifically for Citroën C1 and Peugeot 107 vehicles produced until 2013. This component plays a crucial role in displaying the current gear selection to the driver, ensuring safe and convenient driving by keeping the driver informed about the transmission status.

This indicator is typically located on or near the gear shift assembly and is integrated with the vehicle’s electronic control system to provide clear and accurate feedback of the automatic transmission gear positions. It helps prevent mis-shifts and allows smoother gear changes, reducing wear on the transmission system.

Over time, the gear position indicator can fail due to electrical faults, mechanical wear, or exposure to environmental factors, which may result in incorrect gear display or difficulty in engaging gears properly. Replacing the faulty indicator restores accurate gear information, contributing to safer vehicle operation.

Replacement Instructions

Replacing the gear position indicator generally involves accessing the gear shift assembly, disconnecting the faulty indicator, and installing the new unit. It is recommended to carefully follow manufacturer guidelines or consult a professional mechanic to ensure proper installation and calibration.

Technical Information

• Manufacturer: PSA (Peugeot Société Anonyme)
• Model Compatibility: Citroën C1, Peugeot 107 (models produced up to 2013)
• Product Codes: 246329
• Additional Numbers: N/A

Looking for a reliable and high-quality automatic gear selector for your Citroën C1 or Peugeot 107? We present a used gear system with a built-in speed sensor, ideal for restoring smooth and precise shifting in your vehicle.

This gear mechanism is ready for installation. Thanks to original product codes inclusion, you can be confident this part fits perfectly and restores your vehicle’s functionality to its original condition. It ensures effective gear changes, enhancing overall driving comfort.

Technical Information

• Manufacturer: PSA Group
• Model: Citroën C1, Peugeot 107
• Product Codes: 1612500880, 1608025580
• Additional Numbers: 217706

This part is specifically designed for the automatic transmissions of Citroën C1 and Peugeot 107 models, ensuring seamless compatibility and easy installation. Replacing your old gear selector with this component will significantly improve shifting responsiveness and restore your vehicle’s original performance.

Secure this essential part for your Citroën C1 or Peugeot 107 to ensure your driving experience is smooth and worry-free once again. This part is the ideal choice for professional technicians and DIY car enthusiasts seeking a trusted and effective solution.

This automatic gear selector with integrated speed sensor is designed specifically for Citroën C1 and Peugeot 107 models. Engineered for reliable performance, it facilitates smooth and precise gear changes in automatic transmissions, making it a perfect choice for both professional mechanics and DIY enthusiasts.

The gear selector’s built-in speed sensor enhances driving control by accurately relaying transmission input data to the vehicle’s system, enabling seamless shifts and improved overall vehicle functionality. Installation is straightforward, requiring no complex modifications, allowing for quick replacement and minimal downtime.

Crafted from durable materials and manufactured with precision, this component withstands regular wear and tear commonly experienced in automatic transmission systems. Regular use of the gear selector can cause wear due to mechanical stresses during shifting, making replacement necessary to maintain optimal transmission performance.

Technical Information

• Manufacturer: PSA Citroën Peugeot
• Model: Citroën C1, Peugeot 107
• Product Codes: 241065, 217706, 1612500880
• Other Numbers: N/A

This gear selector is widely sought after due to its specialized role in automatic transmissions. Its main function is to enable easy and reliable gear shifting, contributing to smoother driving experience and enhanced vehicle safety. Frequent replacement may be needed because of the part’s intensive use during gear changes. By choosing this quality component, you ensure your vehicle remains efficient and comfortable to drive.

If you require a dependable automatic gear selector for your Citroën C1 or Peugeot 107, this precisely manufactured part offers an excellent balance of quality and performance. Upgrade your vehicle’s shifting mechanism and enjoy improved safety and driving comfort with this effective and well-functioning component.

Looking for a reliable and high-quality auto part for your Citroën or Peugeot? The Gear Shift Lever for Citroën C4 Picasso is the ideal choice to keep your vehicle in optimal operating condition. This used part is not only a great solution for mechanical repairs but also for daily use of your car.

The gear shift lever is a crucial component for the proper functioning of the transmission and smooth shifting. This specific model offers efficient and precise shifting, which is key for smooth and safe driving. It features a modern design and comes in black Cornélie color, enhancing the aesthetic appeal and integrity of your vehicle’s interior.

Technical Information
Manufacturer: PSA Citroën Peugeot
Model: Citroën C4 Picasso First Series
Product Codes: 96811352XT, 2400FP, 98002210VV
Other Numbers: These numbers correspond to the specifications and standards necessary for proper installation and function in corresponding vehicle models.

This auto part is approved for use in Citroën vehicles. The replacement part may show slight signs of use; however, its quality and functionality are guaranteed. It is designed for the first series of Citroën C4 Picasso models, ensuring seamless compatibility and the replacement of the old part with this quality used auto part.

Upgrading or repairing your vehicle with this gear shift lever will ensure that your car continues to operate efficiently and effectively. The replacement is relatively simple and can be carried out in either a workshop or by yourself using basic tools. This part is commonly searched by the specified codes, making the identification and purchase of the correct product for your vehicle easier.

If you are looking for a reliable and cost-effective alternative to new parts, choose the Citroën C4 Picasso Gear Shift Lever. This auto part not only enhances the functionality of your vehicle but also its overall appearance and driving experience.

This Clutch Release Fork is an essential component for maintaining the clutch system in Citroën and Peugeot vehicles powered by 2.0 HDI and 2.2 HDI engines. It plays a crucial role in disengaging the clutch, allowing smooth gear shifts and preventing premature wear on other transmission parts.

Commonly replaced due to normal wear from pressure and mechanical stress, this fork ensures precise movement of the release bearing during clutch operation. A worn or damaged release fork can lead to clutch engagement problems, difficulty in shifting gears, or abnormal noises.

Installation involves accessing the clutch housing, generally by removing the transmission, then replacing the worn or damaged fork with the new part. Proper alignment and lubrication during installation help optimize performance and longevity.

Technical Information

• Manufacturer: PSA (Peugeot Société Anonyme)
• Models: Suitable for Citroën and Peugeot models equipped with 2.0 HDI and 2.2 HDI engines
• Product Codes: 96522554, 211759
• Additional Numbers: 96322554

Replacing the clutch release fork at appropriate intervals helps maintain clutch system performance and extends the overall lifespan of the vehicle’s transmission. Common signs of failure include difficulty in releasing the clutch pedal or unusual noises coming from the transmission area.

This fork is commonly sought by mechanics and DIY enthusiasts under the product codes 96322554, 96522554, and 211759. It is designed to withstand the stresses of regular clutch operation but may wear out over time due to friction and constant movement, making periodic replacement necessary to maintain optimal performance.

The replacement process typically involves accessing the clutch housing after removing the transmission from the vehicle. Proper installation ensures that the clutch disc disengages correctly, preventing slipping or difficulty in shifting gears.

Technical Information

• Manufacturer: PSA Citroën / Peugeot
• Models: Suitable for Citroën C1, Peugeot 107 with 2.0 HDI and 2.2 HDI engines
• Product Codes: 96322554, 96522554, 211759
• Additional Numbers: Compatible references as per manufacturer catalogs

Restore crisp, reliable gear changes with these Shift Linkage Rods for the Citroën C4. Designed for mechanics and experienced DIY enthusiasts, this replacement set is intended for Citroën C4 vehicles equipped with the 1.6 16V NFU engine code. These rods transfer movement from the gear lever to the transmission, ensuring accurate selection of gears and reducing unwanted play in the shifter assembly.

Key Benefits

• Improves shift precision and reduces free play in the gear lever.
• Fits original mounting points for straightforward installation.
• Durable construction to withstand normal road use and exposure to the elements.
• Ideal for workshop repairs or DIY transmission linkage replacement.

Symptoms Indicating Replacement Is Needed

Replace the shift linkage rods if you notice excessive shifter play, difficulty engaging gears, gears popping out under load, or a sloppy feel in the gear lever. These symptoms commonly result from worn ball joints, corroded or bent rods, damaged bushings, or collapsed linkage components.

Typical Causes And Lifespan

Wear usually occurs at pivot points and ball joints due to repeated movement, contamination, or lack of lubrication. Corrosion from road salt and impacts from foreign objects can bend or damage rods. Lifespan varies with driving conditions and maintenance; many vehicles need attention after long-term use (for example around or after 100,000 km), but replacement should be based on symptoms and inspection rather than a fixed interval.

Installation Guidance

Installation is typically straightforward for a qualified mechanic or a competent DIYer with basic tools. General steps:

• Secure the vehicle on level ground and support safely with jack stands if lifting is required.
• Locate the linkage from the gear lever to the transmission and identify retaining clips or fasteners at each end.
• Remove old rods by releasing clips or bolts at the pivot/ball joint ends; note orientation for reassembly.
• Fit the new linkage rods, ensuring ball joints seat fully and clips are correctly installed.
• Check gear selection through the full gate and test drive to confirm smooth engagement.

Use appropriate thread locking or torque specifications where called out in vehicle repair literature. Always verify fitment and functionality after installation.

Compatibility And Fitment

Intended for Citroën C4 vehicles with the 1.6 16V NFU engine code. Always verify compatibility with the vehicle identification number (VIN) or the engine code before ordering. If unsure, consult vehicle documentation or contact a specialist to confirm correct fitment.

Technical Information

Manufacturer: Citroën
Model: C4 (1.6 16V NFU)
Product Codes: Not Provided
Other Numbers: Not Provided