High-quality DENSO AC compressor compatible with many Stellantis models. Ideal for professional workshops and DIY mechanics seeking a direct-fit replacement for faulty or noisy compressors. Frequently searched by part numbers 447150-3250, 9802875780, 9819714980, 9827528980, 9827552180 and 1617294480 — include these codes in your search to find exact fits and cross-references.

Product Overview

This DENSO compressor is a belt-driven unit designed to compress and circulate refrigerant in the vehicle air conditioning system. It includes the clutch assembly and electrical connector as found on the donor vehicle. The compressor was removed from a vehicle with 94,000 km and is suitable for replacing failed units in compatible Citroën, Peugeot and related models. It restores cold-air performance when installed correctly and paired with a clean, correctly serviced A/C system.

Technical Information

• Manufacturer: DENSO
• Model: Citroën Berlingo, Citroën C2, Citroën C3, Citroën C4 II, DS4, Xsara, Xsara Picasso; Peugeot 206, Peugeot 307, Peugeot 308 T9, Peugeot Partner, Peugeot Rifter; selected Fiat and Opel models
• Product Codes: 447150-3250, 9802875780, 9819714980
• Other Numbers: 9827528980, 9827552180, 1617294480

Function And Symptoms

The compressor is the heart of the A/C system: it compresses low-pressure refrigerant vapour into high-pressure vapour and drives circulation through the condenser, expansion device and evaporator. Typical failure symptoms include loss of cooling, A/C clutch not engaging, abnormal noise from the compressor area, visible oil or refrigerant leaks and seized compressor causing belt slippage or breakage.

Common Causes Of Failure

• Contamination in the system (metal debris, moisture) that damages internal components
• Lubrication loss due to refrigerant/oil leak, causing bearing or piston wear
• Electrical clutch coil failure or connector corrosion
• Overheating from low refrigerant charge or blocked condenser
• Age and normal wear, especially in vehicles with high mileage or poor maintenance

Replacement And Installation

1. Recover refrigerant using certified A/C recovery equipment in accordance with local regulations.
2. Disconnect the battery and follow vehicle manufacturer safety procedures.
3. Remove accessory belt and disconnect electrical connector from the compressor clutch.
4. Undo mounting bolts and remove the compressor. Inspect system for debris and contamination.
5. Replace O-rings on high- and low-pressure lines with correct sizes lubricated with the specified oil.
6. If contamination is present, flush the system or replace affected components (condenser, receiver/drier or accumulator, expansion valve) to prevent rapid re-failure.
7. Install the replacement compressor, torque fasteners to manufacturer specification, evacuate the system with a vacuum pump and recharge with the correct refrigerant type and oil volume as specified by the vehicle manufacturer.
8. Check for leaks, verify correct clutch engagement, and confirm cooling performance during a road or bench test.

Installation Recommendations

• Always use proper refrigerant recovery and charging equipment. Never vent refrigerant to atmosphere.
• Replace receiver/drier or accumulator when replacing the compressor if the system has been opened or contaminated.
• Use the manufacturer’s specified refrigerant oil type and quantity (typically PAG for modern systems) and follow torque settings from the repair manual.
• Perform a full system vacuum and leak test before charging. Run the system to circulate oil and verify operation.
• Professional installation is recommended for correct evacuation, charging and leak checking, but experienced DIY mechanics with appropriate tools can perform the job safely.

Most Common Reason For Failure

The single most common cause of compressor failure is contamination and lubrication loss in the refrigerant circuit. Debris from a failing component or moisture in the system accelerates internal wear and can lock the compressor, making replacement necessary. Preventive maintenance and prompt repair of small leaks significantly reduce the risk of compressor damage.

This Sanden SD6V12 air conditioning compressor is a direct-fit option commonly found on a range of Citroën and Peugeot models. Supplied with OEM reference numbers that customers often search for (9655191580, 9800822280, 6453QE), this compressor is suitable for professional garages and experienced DIY mechanics who need a reliable replacement part for R134a A/C systems. The part is well suited for vehicles that originally used the Sanden SD6V12 family of compressors, including variants fitted to the Peugeot 307 CC 2.0i.

Technical Information

• Manufacturer: Sanden
• Model: SD6V12
• Product Codes: 9655191580, 9800822280, 6453QE
• Other Numbers: 1449
• Source Vehicle: Peugeot 307 CC 2.0i (161,000 km)

Common Fitment

Typical applications include a range of Citroën and Peugeot models where Sanden SD6V12 compressors are used. Examples: Peugeot 307 (including CC 2.0i), Peugeot 206, Peugeot Partner, Citroën Berlingo, Citroën C2, Citroën C3, Citroën Xsara, Citroën Xsara Picasso. Always match the OEM numbers when searching for the correct replacement.

Installation Recommendations

• Recover Refrigerant Safely: Recover the existing refrigerant using professional recovery equipment before removing the old compressor.
• Replace System Components: Replace Receiver/Drier (or Accumulator) and, if applicable, the Expansion Valve/Orifice Tube to prevent contamination and moisture issues.
• Oil Management: Ensure Correct Oil Type And Quantity. Sanden SD Series compressors are designed for PAG oil. Add the correct amount of oil as specified by the vehicle manufacturer or compressor supplier.
• Vacuum And Leak Test: Evacuate The System With A Vacuum Pump For At Least 30 Minutes And Perform A Leak Check Before Recharging.
• Recharge To Spec: Refill The System With The Specified Refrigerant (Typically R134a For These Applications) And Charge To Manufacturer Pressure/Weight Specifications.
• Functional Test: Run The Engine, Engage The A/C, And Verify System Pressures, Cooling Performance, And Clutch Operation.

Why This Part Fails

Compressor failure is commonly caused by:

• Contamination From System Debris Or Moisture Causing Internal Damage
• Clutch Wear Or Electrical Faults Preventing Engagement
• Insufficient Or Degraded Lubrication Leading To Bearing Or Piston Failure
• Refrigerant Leaks Leading To Low Oil Levels And Overheating
• System Blockages (Expansion Valve/Orifice) Causing Excessive Pressure And Stress

Practical Notes For Mechanics And DIY

Search Using OEM Numbers: Many technicians and hobby mechanics find this part by searching OEM references (9655191580, 9800822280, 6453QE). When replacing the compressor, follow industry-standard A/C service procedures and safety precautions. If The System Shows Signs Of Contamination (Metal Particles, Burnt Oil Smell), Thorough Flushing Or Additional Repairs May Be Required.

With correct installation and system servicing, the Sanden SD6V12 compressor returns a reliable service life. Use Manufacturer Guidelines For Torque Values, Electrical Connections, And Refrigerant/Oil Specifications During Replacement.

This Sanden SD6V12 A/C compressor (part number 9655191580) is a direct-fit option commonly used on a range of Citroën and Peugeot models. Intended for professional mechanics and experienced DIYers, the unit is often searched and ordered by its product codes, which makes it easy to locate for quick repairs. Replacing a faulty compressor restores cooling performance, reduces cabin temperature quickly and removes abnormal noise coming from the air conditioning system.

Technical Information

• Manufacturer: Sanden
• Model: SD6V12
• Product Codes: 9655191580, 9800822280
• Other Numbers: 6453QE, 1449
• Electrical System: 12 V vehicle electrical system
• Typical Refrigerant: R134a (commonly used on vehicles of this generation)

Compatible Vehicles (Examples)

Common fitment examples include Citroën Xsara Picasso 1.6 16V, Citroën Xsara, Citroën Berlingo, Citroën C2, Citroën C3 and Peugeot 206, Peugeot 307, Peugeot Partner. Always check the part code against the vehicle’s original number to ensure fitment.

Recommended Installation

• Work must be carried out by a qualified technician or an experienced DIYer with the correct tools.
• Recover refrigerant from the system with appropriate equipment before removal.
• Disconnect the battery, remove the drive belt and electrical connectors, then unbolt the compressor from its mounts.
• Replace any associated O-rings and the receiver/drier or accumulator if they show contamination or have not been changed recently.
• Vacuum the system to remove moisture and check for leaks before recharging with the correct type and amount of refrigerant and oil as specified for the vehicle.
• After installation, run the system to check pressures, temperature drop and for unusual noises.

Why This Part Fails Most Often

Compressor failures are typically caused by contamination of the refrigerant circuit (metal debris, sludge), loss of lubrication, clogged expansion valves or orifice tubes, or bearing and clutch wear. Overheating, oil starvation and improper maintenance (for example, not replacing the receiver/drier after a system failure) accelerate internal damage. Symptoms include reduced cooling performance, excessive noise from the compressor, clutch engagement issues and visible oil leaks around the compressor body.

Why Choose This Part

Mechanics and experienced DIYers appreciate parts listed by OE numbers for fast identification. This Sanden SD6V12 unit matches common original equipment codes for many Citroën and Peugeot applications and is a practical choice when restoring reliable A/C function on affected models.

This VALEO A/C compressor is an OEM-quality unit originally fitted to multiple Stellantis models. It is a direct-fit replacement for vehicles listed under the corresponding product numbers and is especially useful for professional workshops and experienced DIY mechanics searching by part number 9827528980, 9827552180 or 1617294480. The unit was removed from a car with 64,000 km and is ready for installation after standard installation procedures.

Key Benefits

• Direct-fit design for easy replacement on compatible Citroën and Peugeot models.
• High-quality Valeo manufacturing ensures correct clutch and pulley alignment.
• Saves diagnostic and repair time when identified by OEM product numbers: 9827528980, 9827552180, 1617294480.
• Suitable for professional repair shops and experienced DIY mechanics familiar with A/C service procedures.

Technical Information

• Manufacturer: Valeo
• Model: Commonly fitted to Citroën/Peugeot/DS platforms such as Citroën Berlingo (B9/III), Citroën C2, C3, C4 II, Citroën DS4, Peugeot 206, 307, 308 (T9), Peugeot Partner (III), Peugeot Rifter, XSARA, XSARA Picasso (check product numbers for exact fitment)
• Product Codes: 9827528980, 9827552180, 1617294480
• Other Numbers: 9827528980-02, 9827552180-02, Alternate references: 9827528980 / 9827552180 / 1617294480

Function And Compatibility

The compressor is the heart of the vehicle air conditioning system: it circulates refrigerant under pressure, enabling heat exchange in the condenser and evaporator and delivering cooled air to the cabin. Depending on the vehicle specification, the compressor is used in systems charged with R134a or R1234yf refrigerant; confirm the refrigerant type for the particular vehicle model and production year before service.

Common Failure Causes

• Mechanical wear of bearings and clutch assembly leading to noise or seizure.
• Loss of lubrication caused by system leaks or prolonged low refrigerant level.
• Contamination from a failed condenser, dryer/accumulator, or compressor internals causing internal damage.
• Electrical faults in the clutch coil or wiring preventing compressor engagement.

Replacement Guide

Recommended steps for replacement (intended for trained technicians or experienced DIY mechanics with proper equipment):

• Recover refrigerant from the system using certified recovery equipment.
• Disconnect the battery before starting work to avoid electrical damage.
• Remove drive belt and electrical connectors from the compressor.
• Cap or plug A/C lines when disconnected to prevent moisture ingress and contamination.
• Remove compressor mounting bolts and extract the unit. Replace any damaged mounting hardware.
• Replace all A/C O-rings with appropriate sizes and lubricate with the correct type and amount of PAG oil as specified for the vehicle.
• Install the new compressor, tighten fasteners to manufacturer torque values, reconnect lines and electrical connectors.
• Evacuate the system to remove moisture and check for leaks, then charge with the correct refrigerant type and specified quantity.
• Run the system and verify proper operation, checking compressor clutch engagement, system pressures, and cabin cooling performance.

Installation Recommendations

• Always replace the receiver/drier or accumulator and expansion valve/orifice tube when opening the system, especially if contamination is suspected.
• Use the specified type and volume of compressor oil (PAG grade) for the particular vehicle system; incorrect oil will reduce service life.
• Perform a vacuum test for at least 30 minutes to ensure no leaks and to remove moisture before charging.
• Do not run the compressor without refrigerant and oil—this causes rapid internal damage.
• After installation, inspect belt tension and pulley alignment to prevent premature wear.

Why The Part Most Often Fails

The most frequent cause of compressor failure is inadequate lubrication due to refrigerant leaks or system contamination. When the system loses refrigerant, it also loses oil circulation, causing bearings and internal components to overheat and wear quickly. Contaminants from a failing condenser or a ruptured dryer can further damage internal valves and pistons, leading to seizure or internal scoring.

Search Tips

For fast identification use the OEM product numbers 9827528980, 9827552180 or 1617294480 when searching. These references improve the chance of finding the correct fitment for Citroën, Peugeot and associated models.

Do you need a quality and reliable climac compressor for your Citroën or Peugeot? This used Denso climac compressor is the ideal choice for the Citroën and Peugeot, which requires a specific type of compressor with a 9810349980 or 9808860080. Or you are a professional car mechanic or you like to repair your car yourself.

Technical Information:
Manufacturer: Denso
Model: Citroën C-Elysée, Citroën C3 III, Peugeot 2008, Peugeot 208, Peugeot 301
product codes: 9810349980, 9808860080
Other numbers: also for models such as Citroën 206, 307, Xsara, Berlingo Partner and other models within the Motor – Parts and Accessories category.

Climac compressors are a key element for proper air conditioning function in the vehicle. They produce the cooling medium that is needed for efficient cooling of the car interior during hot summer days. Regular control and replacement of the compressor may be necessary to maintain optimal air conditioning performance, especially in older vehicles. This particular climac compressor has been carefully tested to meet all functional standards and is ready for installation.

By purchasing this part you also contribute to sustainability and environmental protection, as its recycling helps reduce the need for production of new components. From now on, you can travel in your vehicle comfortably and knowing that your air conditioning will work without any problems.

Over time, AC compressors can fail due to wear of internal components or issues with the electromagnetic clutch, which engages the compressor when cooling is needed. This particular unit includes a used compressor with a damaged electromagnetic clutch connector that requires repair before installation. Regular inspection of the compressor’s clutch and pulley is essential to avoid system failures.

Technical Information

• Manufacturer: Sanden
• Model: SD6V12
• Product Codes: 6453QF, 6453QE
• Additional Numbers: N/A

The compressor pulley measures 119 mm in diameter and features 6 ribs, compatible with standard belt systems on mentioned vehicles. The unit requires PAG 46 oil with a fill volume of 135 ml to ensure optimal lubrication and longevity of the compressor.

Installation typically involves removing the old compressor, properly evacuating the refrigerant from the AC system, replacing the unit, and refilling with the correct type and amount of oil and refrigerant. Make sure to check the condition of the electromagnetic clutch and connectors during replacement to ensure reliable performance.

This Sanden compressor is an ideal replacement for mechanics and DIY enthusiasts focused on maintaining or repairing the air conditioning systems of Citroën and Peugeot cars, increasing system efficiency and driver comfort.

Are you looking for an air conditioning compressor for your Citroën or Peugeot? You’ve found the right product. This air conditioning compressor, identified by the product codes 9814865380 and 9806599380, is manufactured by DENSO and specifically designed for Citroën and Peugeot vehicles. It delivers proven quality and performance, making it an ideal replacement part for those who want effective cooling at a reasonable price.

The air conditioning compressor is a vital component of your vehicle’s climate control system. It is responsible for proper cooling and comfort during driving, especially in warm summer months. This product is ready for installation, saving time and costs on fitting.

Technical Information

• Manufacturer: DENSO
• Model: Citroën, Peugeot – see compatible models below
• Product Codes: 9814865380, 9806599380
• Additional Numbers: Compatible with multiple vehicle models – details below

The compatibility of this air conditioning compressor includes Citroën C2, C3, C-Elysée, Berlingo, XSARA, and XSARA PICASSO, as well as Peugeot 206, 301, 307, and PARTNER models. These vehicles are highly popular among professional mechanics and DIY car owners due to their reliability and ease of maintenance. Due to this part’s versatility, it is recommended to verify your vehicle’s specific details to ensure the perfect match.

Using this air conditioning compressor will not only improve your vehicle’s performance but also enhance cooling efficiency, essential for comfortable driving all year round. This replacement part helps keep your car in excellent condition without the need for expensive new components.

Consider this high-quality, reliable, and compatible air conditioning compressor as a trustworthy option for your vehicle. With the assurance of previous inspection and professional service, you gain a product that you can depend on.

Dear mechanics and DIY enthusiasts, we present to you the high-quality Sanden SD7V16 1813 Air Conditioning Compressor, an ideal choice for repairing and maintaining the air conditioning systems in Citroen and Peugeot vehicles. This specially designed compressor model is known for its reliability and long lifespan, making it an excellent replacement for the original part.

The air conditioning compressor is a crucial component of your vehicle’s climate control system, with the main function of compressing and transporting the refrigerant. The effective operation of this part ensures that your interior remains comfortably cool during hot summer days. By utilizing this compressor, you can expect optimal performance and reduced energy demands on the system.

Technical Information

• Manufacturer: Sanden
• Model: SD7V16 1813
• Product Codes: 9687499380, 648748, 648749
• Additional Numbers: N/A

The Sanden SD7V16 air conditioning compressor is compatible with a wide range of vehicle models, including the Peugeot 206, 406, 607, 807, and Expert II, as well as the Citroën Berlingo, Partner, C5 I, C8, Jumpy II, and more. This part is especially suitable for repairs on older car models where compatibility and reliability are essential.

Installing this air conditioning compressor is straightforward if you have experience with similar repairs. However, it is recommended that a professional carry out the installation to ensure proper functionality and prevent potential complications in the future.

When selecting replacement parts, it is always important to choose high-quality and verified components that ensure the smooth operation of your vehicle. With the Sanden SD7V16 air conditioning compressor, you can be confident that you are getting a product that meets your expectations and helps keep your car in top condition.

If you are looking for a dependable AC compressor for your Citroën or Peugeot, the Sanden SD6V12 is an excellent choice to maintain optimal air conditioning performance. This quality used part ensures your vehicle stays comfortable whether on hot summer days or chilly winter nights.

The Sanden SD6V12 compressor is well-known for its durability and high cooling efficiency. It is compatible with a broad range of Citroën and Peugeot models, making installation straightforward and hassle-free for professional mechanics and DIY enthusiasts alike.

Technical Information:

Manufacturer: Sanden
Model: SD6V12
Product Codes: 9646279880, 6453LH, 6453LF
Additional Numbers: 1438
Compatible Models: Citroën Berlingo, Citroën C2, Citroën C3, Citroën C3 Pluriel, Citroën Xsara, Citroën Xsara Picasso, Peugeot 206, Peugeot 206+, Peugeot 307, Peugeot Partner

This compressor typically fails due to material wear and the degradation caused by old or poor-quality refrigerant. Replacing this component significantly enhances your vehicle’s air conditioning efficiency, ensures smoother engine operation, and helps reduce fuel consumption and noise levels during use.

Invest in quality and enjoy comfortable driving in any weather. The Sanden SD6V12 Air Conditioning Compressor delivers reliable performance to keep your vehicle’s climate system running smoothly under all conditions. Order today and experience the difference in your vehicle’s comfort and efficiency!