Part description

This water hose / connection to the expansion tank is designed for 1.5 HDI engines and serves to safely guide the coolant in the cooling system. Proper hose function is key to maintaining engine operating temperature, circuit tightness, and stable cooling system pressure.

The part is suitable as a replacement in case of damage to the original hose, leakage or rupture of the material. Thanks to the search number 9812439880, you can easily find it even by the markings from the original part.

Technical information

• Manufacturer: Stellantis
• Model: CITROEN BERLINGO III, Citroen C4 II, FIAT DOBLO III, OPEL COMBO E K9, Peugeot 308 T9, PEUGEOT RIFTER, Toyota ProAce City
• Other numbers: not specified

Product codes

• Product codes: 9812439880

Installation recommendations

• Before assembly, check the condition of the neck of the expansion tank, connections and clamps – leaks often occur outside the hose itself.
• It is recommended to use new clips or verify the full functionality of the existing ones (correct diameter, sufficient pressure).
• After replacement, top up the coolant to the correct level and bleed the system according to the procedure for the vehicle in question.
• After warming up the engine, check that there are no fluid leaks anywhere and that the pressure in the system is maintained.

Reasons why the part is damaged

• Aging of the material due to heat and pressure in the cooling system (hardening, cracking).
• Leakage at joint due to loose/inappropriate clip or deformed neck.
• Overpressure in the system (e.g. with a problem with the cap of the expansion tank or venting) leading to a burst.
• Mechanical damage during service interventions or contact with surrounding parts.
• Inappropriate coolant or neglected replacement which accelerates the degradation of rubber/plastic parts.

Part description

This water hose to the radiator is designed for 1.5 HDI engines and serves to safely guide the coolant in the cooling circuit. A properly sealing hose is key to a stable engine operating temperature, proper operation of the radiator and heater, and prevention of fluid leakage.

The part is a suitable choice when repairing leaks, replacing a damaged hose or when servicing a cooling system where it is necessary to quickly and reliably replace the original line.

Technical information

• Manufacturer: PSA Citroën Peugeot
• Model: Citroën Berlingo III; Citroën C4 II; Peugeot 308 T9; Peugeot Rifter; Opel Combo E K9; Fiat Doblo III; Toyota ProAce City
• Other numbers: not specified

Product codes

• Product codes: 9812441880

Installation recommendations

• Before assembly, check the condition of the radiator neck and other connections (cracks, corrosion, burrs) so that the hose fits and seals properly.
• It is recommended to use matching buckles in good condition; tired clips often cause re-leakage.
• After topping up the coolant, perform a ventilation of the cooling system according to the normal procedure for the given car and check for leaks after the engine has warmed up.
• After the test drive, recheck the coolant level and any signs of leakage.

Reasons why the part is damaged

• Aging of the material due to heat and pressure in the cooling circuit (hardening, microcracks).
• Leaking or deformed clips which gradually damage the hose or fail to tighten the joint.
• Contact with oil/chemicals or unsuitable coolant that accelerates rubber/plastic degradation.
• Mechanical damage (abrasion against surrounding parts, bad hose routing, vibrations).
• Engine overheating and pressure surges in the system that increase the risk of cracking or tearing.

Product description
Air connection to turbocharger for 1.5 HDi/BlueHDi (DV5) engines. This is an original solution with quick couplings that leads clean intake air from the filter to the turbo intake. Used, carefully inspected part – ideal replacement if the original intake hose/pipe is cracked, swollen or leaking.

Key benefits
– Direct replacement according to OE number: PSA 9810921180
– Correct geometry and diameters for DV5 1.5 HDi/BlueHDi – no modifications required
– Tight quick couplings minimize false suction and pressure leakage
– Durable plastic/elastomer for long life and stability during temperature changes

Compatibility
– Citroën: Berlingo III (K9), C4 II and others with 1.5 BlueHDi engine
– Peugeot: 308 T9, Rifter (K9) and other 1.5 BlueHDi
– Opel: Combo E (K9) 1.5 Diesel
– Toyota: ProAce City 1.5 Diesel
– Fiat: Doblò III 1.5/1.6 Diesel according to the specific intake variant
Note: Actual compatibility is always governed by the OE part number and specific intake design. Before ordering, verify the match by VIN and number 9810921180.

Technical information
– Function: supply of intake air from the airbox to the turbocharger (inlet)
– Location: engine compartment, turbo intake side
– Engine: 1.5 HDi/BlueHDi (DV5 – DV5RE, DV5RD, DV5RC etc., Euro 6/6.2)
– Design: plastic/tubular section with rubber cuffs and quick couplings
– Typical accessories: quick coupler clips/locks (supplied only if shown in photos)

When to change this part
– Cracks or micro-cracks in the hose, grease around the joints
– Intake whistling, power drop, increased consumption
– Fault codes related to air metering/boost (eg P0101)
– Smoke when accelerating, uneven running

Assembly tips
– Check and clean the mating surfaces and O-rings of the quick couplings
– Lightly coat the sealing rings with silicone oil before snapping
– Check the condition of the intake filter and airbox hold, you will prevent future leaks
– After assembly, perform a visual inspection and a short test drive

Part identification
– OE/OEM: PSA 9810921180
– Designation in practice: air connection, intake hose, intake pipe to turbo, air intake hose/inlet 1.5 HDi

Condition and origin
– Used part from Citroën/Peugeot (PSA) and related models on the K9 platform
– Fully functional, condition according to photo; minor cosmetic signs of use may occur

Tip for quick verification
If your old connection bears the number 9810921180, or has the same shape and quick couplings, it is the correct replacement. In case of confusion, send the VIN – we will verify compatibility.

Original used air connection/quick coupling to intercooler for 1.5 HDi / 1.5 BlueHDi (DV5) engines. The part conducts compressed air between the turbocharger pipe and the intercooler and is intended for the K9/EMP2 platform. Ideal replacement for a damaged intake hose/tube or leaking coupling. OE number: 9831710780.

Key benefits
– Original PSA part – precise fit, long service life, no modifications required
– Quick coupling with O-ring – quick assembly and reliable tightness
– Designed for 1.5 HDi / 1.5 BlueHDi (DV5) – 55-96 kW (75/100/130 hp)
– Suitable for service repairs for vacuum/overboost/underboost errors (e.g. P0299), hissing from the intake area, loss of power or oil maps on the hoses

Vehicle compatibility (selected)
– Citroën Berlingo III (K9) 1.5 BlueHDi
– Citroën C4 II 1.5 BlueHDi (selected late years – always check by VIN)
– Peugeot Rifter (K9) 1.5 BlueHDi
– Peugeot 308 T9 1.5 BlueHDi
– Opel/Vauxhall Combo E (K9) 1.5 BlueHDi
– Toyota ProAce City 1.5 D
– Fiat Doblò (K9, rebadged) 1.5 BlueHDi
Note: Not suitable for older 1.6 HDi/2.0 HDi. Before purchasing, compare the part number 9831710780 and the shape/fitting with your original part.

Technical information
– OE/PSA: 9831710780
– Function: compressed air connection to/from intercooler (part of intake/turbo line)
– Design: plastic/composite, quick connect with sealing O-ring and locking clip
– Location: front right part of the engine compartment (according to the model)

Condition and what’s included
– Original part used, see photo of actual piece
– Normal cosmetic wear without affecting function
– Supplied as the connection/elbow itself (if applicable, clips and seals according to the current photo documentation)

Installation recommendations
– Always replace the O-ring with a new one and clean the mating surfaces
– Check the condition of adjacent hoses and intake lines (microcracks often cause pressure leaks)
– Tighten the clips according to the manufacturer’s specifications, after installation perform a leak test/drive test and erase any DTCs

Why choose a used original?
– Better fit than cheap universal or non-genuine replicas
– Quick availability and significant savings compared to a new OE part

Searching by number? You can also find this part as “intake/intercooler hose 1.5 HDi, turbo pipe 1.5 BlueHDi, intercooler connection PSA 9831710780”.

Doubts about compatibility? Send the VIN – we will verify the match with your car. Guarantee of functionality according to the conditions of the e‑shop.

Air connection to intercooler for 1.5 HDi/BlueHDi (DV5) engines. Genuine used PSA part, ideal replacement for a damaged or leaking compressed air line between the turbocharger and the compressed air cooler. OE number 9810958280 ensures an exact match and easy catalog search.

Key benefits
– Original part from the PSA concern – precise assembly, correct geometry and tightness
– Designed for 1.5 HDi/BlueHDi engines (DV5) – no modifications required
– Quick recovery of correct filling pressure, performance and consumption
– Suitable for Citroën, Peugeot and selected Opel/Fiat/Toyota derivatives on the same platform

Technical information
– OE/OEM: 9810958280 (PSA)
– Part Name: Intercooler Air Connection/Line (Intake & Turbo Hose/Tube)
– Purpose: intake pressure branch between the turbocharger and the intercooler (or from/to the intercooler depending on the specific installation)
– Engine: 1.5 HDi / 1.5 BlueHDi (DV5)
– Condition: used original part, without cracks and obvious mechanical damage
– Category: 1.5 HDI > Engine – parts and accessories > Hoses, intake pipes and turbo

Compatibility – selected models with 1.5 HDi/BlueHDi
– Citroën Berlingo III (K9)
– Citroën C4 II
– Peugeot 308 T9
– Peugeot Rifter
– Opel Combo E (K9)
– Toyota ProAce City
– Fiat Doblò III (selected versions sharing the PSA solution)
Note: Actual compatibility is governed by OE number and specific engine/body variant. Before purchasing, please compare the part shape and number 9810958280 with the original component or verify by VIN.

Typical symptoms of failure and when to replace the part
– Squealing or hissing under load, loss of boost pressure
– Increased consumption, less power, smoke
– Oil maps around the connection/hose, cracks, play in joints

Installation recommendations
– Always check and if necessary replace seals/rings and clips
– After assembly, perform a smoke test or check for leaks in the intake
– Make sure the lines are clean to avoid sucking dirt into the turbo/intercooler

Searching by number? Enter in the search: 9810958280, PSA 9810958280, intercooler air connection 1.5 HDi, intake/turbo hose 1.5 BlueHDi.

Reliable air connection to the intercooler for 1.5 HDi/BlueHDi (DV5). Genuine used PSA part number 9820100780, ideal for a fast and durable repair of the pressure part of the turbo intake without compromise.

Why choose this part?
– Original PSA quality: exact geometry, correct fitting and material corresponding to serial production.
– Quick coupling with seal: secure and tight connection of the pressure pipe with the intercooler.
– Verified compatibility with 1.5 HDi/BlueHDi (DV5): minimizes the risk of leaks, loss of pressure and emergency modes.
– Good replacement for a cracked or leaking turbo intake pipe/hose.

Part type and location
– Function: connection/quick coupling of the intake pressure branch (charge air) to the intercooler.
– Purpose: 1.5 HDi/BlueHDi (DV5) engine – connecting part between the turbo pressure pipe and the compressed air cooler (intercooler) or between the intercooler and the intake pipe depending on the specific variant.
– Design: plastic/composite with mounting for O-ring and locking clip (see photo).

OEM and search by number
– OEM (PSA): 9820100780
– Also often searched as: 98 201 007 80, 9820 100 780
– Name of the concern: PSA CITROËN/PEUGEOT

Compatibility of vehicles with 1.5 HDi/BlueHDi (DV5) engine – selected models
– Citroën Berlingo III (K9)
– Citroën C4 II – selected versions with 1.5 BlueHDi
– Peugeot 308 T9 (1.5 BlueHDi)
– Peugeot Rifter (K9)
– Opel Combo E (K9) 1.5 Diesel
– Toyota ProAce City 1.5 D
– Fiat Doblò (platform shared with K9 – check by VIN/OEM)

Important assembly notes
– Check the condition of the O-ring and locking clip before assembly; replace the gasket if it is hardened or damaged.
– Clean the contact surfaces from oil vapors and dirt, lightly lubricate the joint with silicone vaseline for easy snapping.
– After assembly, carry out a pressure test of the suction (smoke test) to verify the tightness.
– Always verify compatibility according to the OEM number 9820100780 and the shape of the original part (or according to the VIN).

Typical symptoms of a faulty connection
– Hissing/whistling under load, loss of thrust, higher consumption
– Oil maps around the joint, soot around the quick coupler
– Supercharge error codes and safe mode

Condition and origin
– Used original PSA part, intended for professional assembly.
– Cosmetic signs of use may be present; condition and possible presence of seals/clips, see product photos.

Search keywords
air connection 1.5 HDI, intercooler connection, turbo intake hose, turbo intake pipe, intake pressure pipe, charge air hose/pipe, DV5, BlueHDi, PSA 9820100780, 98 201 007 80, 9820 100 780

Tip: If you are unsure of compatibility, please compare part number 9820100780 with your original part and quick coupler shape. Professional installation ensures proper tightness and longevity of the suction system.

Air connection to intercooler 1.5 HDi / BlueHDi – OE 9820100680 (98 201 006 80). Original used PSA part for Citroën, Peugeot and group equivalents. It serves as a quick connector for connecting the intake/turbo hose to the intercooler, ensuring a tight line of compressed air without leaks and loss of performance.

Why choose this part?
– PSA original – precise fit, reliability and long life compared to cheap replacements
– Verified used part from disassembly – functional, without cracks, ready for assembly
– Quick assembly – quick coupling/locking ring, minimal car downtime
– Solves typical problems – intake leakage, loss of turbo pressure, whistling, oil maps on the joint

Compatibility (selected models with 1.5 HDi/BlueHDi DV5 engine)
– Citroën Berlingo III (K9) 1.5 BlueHDi
– Citroën C4 II 1.5 BlueHDi (selected years)
– Peugeot 308 T9 1.5 BlueHDi
– Peugeot Rifter / Partner III (K9) 1.5 BlueHDi
– Opel Combo E (K9) 1.5 Diesel
– Toyota ProAce City 1.5 D
– Fiat Doblò (PSA/K9 platform, selected versions)
Note: Actual compliance may vary by year of manufacture, body type and emission standard. Always compare the part number and joint shape/grip, or verify by VIN.

Technical information
– OE number: 9820100680 / 98 201 006 80 (PSA)
– Name: air connection/quick connection to intercooler (hose, intake pipes and turbo)
– Purpose: turbocharged diesel engines 1.5 HDi / BlueHDi (DV5 series – 55–96 kW depending on the version)
– Location: between intake/turbo hose and compressed air cooler (intercooler)
– Construction: plastic/composite connector with fuse, O-ring groove
– Seal: O-ring/gufero – we recommend checking the condition or replacing with a new one during assembly
– Assembly: slide into the lock, secure with a fuse; tighten the buckles according to the manufacturer’s specification; perform a suction pressure test after installation

Condition and quality control
– Used original part, normal cosmetic marks from use
– No cracks or deformations, locks and locks functional
– See photo/note for product for exact condition

How to verify correctness
– Compare OE number 9820100680 (98 201 006 80) with original part
– Check the shape of the lock, the position of the fuse and the diameter of the connection
– In case of confusion, send us the VIN – we will verify compatibility

Search keywords
Air connection 1.5 HDI, intercooler connector, intake hose coupling, turbo intake pipe, intake quick coupler, 9820100680, 98 201 006 80, Citroën Berlingo K9, Peugeot Rifter, Peugeot 308 T9, Opel Combo E, Toyota ProAce City.

Mechanic tip
When assembling, clean the seats and grooves, lightly coat the O-ring with a suitable petroleum jelly for easy insertion and to prevent damage to the seal. After starting, check for leaks (smoke/oil maps/turbo pressure diagnostics).

Original air connection (throat/intake pipe) for 1.5 HDi / 1.5 BlueHDi (DV5) engines for Citroën and Peugeot cars. This is a used PSA OEM part number 9810920980 – the ideal choice if you need a quick and reliable solution to a leaking or damaged intake manifold. Original parts fit exactly, hold their shape and dimensions and ensure proper air flow to the turbocharger, which helps both performance and fuel consumption.

Technical information
– OE/OEM number: 9810920980 (PSA)
– Part designation: air inlet connection/elbow/throat, part of the intake system before the turbo
– Purpose: 1.5 HDi / 1.5 BlueHDi (DV5) engines
– Material: high strength plastic (original PSA)
– Condition: used original part, condition and design see photos
– Delivery: exactly as it is in the photos, without additional accessories, clips and sensors (if they are not in the photos)

Compatibility (indicative)
– Citroën Berlingo III (K9) 1.5 BlueHDi
– Citroën C4 II 1.5 BlueHDi (depending on equipment and year)
– Peugeot 308 T9 1.5 BlueHDi
– Peugeot Rifter 1.5 BlueHDi
– Opel Combo E (K9) 1.5 Diesel
– Fiat Doblò III 1.5/1.6 Diesel in PSA version (depending on the specific version)
– Toyota ProAce City 1.5 Diesel
Note: Always verify the fit against OE number 9810920980 and by comparing the shape with your original part. There may be differences for different years and equipment.

When to replace a part
– Cracks, deformation or hardened plastic
– False air intake, hissing, idle fluctuation
– Power loss, higher consumption, mixture/MAF diagnostic errors

Why choose an original used part?
– Certainty of exact fit and tightness compared to cheap universal replacements
– Material and shape meet the requirements of the 1.5 BlueHDi (DV5) engine
– Quick repair solution at a fraction of the cost of a new part

Assembly tips
– Clean seats and check O-rings/gaskets before assembly
– Check and if necessary replace the clips, tighten evenly
– After assembly, visually verify that the part does not “fit under tension” anywhere and that there is no underblowing

Searching by part number? You can find this part as: 9810920980, Air Connection 1.5 HDI, Intake Manifold 1.5 BlueHDi, PSA Intake Pipe/Turbo. If you are not sure about compatibility, send us the VIN – we will verify the correctness of the part before purchase.

Original air connection (hose/intake pipe) for 1.5 BlueHDi DV5 engines. This is a used original part from disassembly, suitable for Citroën, Peugeot cars and their corporate counterparts. Ideal replacement for cracks, leaks or damage to the original part that cause loss of power and engine control errors.

Key information
– OE/OEM part number: 9811682480 (PSA), also searched as 98 116 824 80
– Part Name: Air Connection / Turbo Intake Hose (Part of Engine Intake Manifold)
– Engine designation: 1.5 BlueHDi (DV5, Euro 6)
– Condition: used original part from disassembly; always compare the condition and design according to the photos and part number
– Construction: durable plastic with rubber seal, quick couplings with fuse for quick assembly/disassembly
– Location: engine compartment – suction line to the turbocharger/airbox (depending on the specific version)

Compatibility (indicative – always check against VIN and part number 9811682480)
– Citroën Berlingo III (K9) 1.5 BlueHDi
– Citroën C4 II selected version with 1.5 BlueHDi
– Peugeot 308 T9 1.5 BlueHDi
– Peugeot Rifter (K9) 1.5 BlueHDi
– Opel Combo E (K9) 1.5 Turbo D
– Toyota ProAce City 1.5D
– Fiat Doblo III (PSA platform) 1.5D

Why choose this part?
– Original PSA quality and precise geometry – correct fit and tightness
– Quick change thanks to factory quick couplers
– Proven solution to typical problems: hissing/whistling under load, oil mist leaking from intake, erratic running, increased smoke, errors like P0101 (MAF), P0299 (low boost pressure)

Installation recommendations
– Carefully check the sealing O-rings and clips before assembly; replace damaged ones
– Check that the connection fits exactly into the quick connectors and that the fuses snap
– Clean the surrounding intake line and MAF sensor of oil film for stable readings
– After assembly, check for leaks at idle and under load

How to verify the correctness of the part
– Compare the stamped/etched number 9811682480 on your old part
– Compare the shape, number and position of the branches, the type of quick couplings and the diameters of the terminals
– In case of confusion, use the VIN of the vehicle for exact matching

Search Keywords (SEO)
Air intake 1.5 HDI, turbo intake hose Citroën Peugeot, intake pipe DV5, OE 9811682480, PSA 9811682480, air intake hose 1.5 BlueHDi, Citroën Berlingo K9 intake, Peugeot 308 T9 turbo hose

Note: Compatibility may depend on the specific engine version and year of manufacture. Always refer to part number 9811682480 and component shape. This is a used original part – see photo for condition.

Are you looking for a reliable replacement part for your Citroën or Peugeot vehicle? Our water hose for the 1.5 HDI engine is the perfect choice for both mechanics and DIY enthusiasts seeking a quality and affordable solution for their vehicle repair. This part has been carefully removed from the vehicle and is ready for immediate installation.

The main advantage of this water hose is its perfect compatibility with Citroën and Peugeot models, ensuring smooth installation and functionality. It is frequently searched under the product number 9812441980, which simplifies identification and ordering.

Technical Information:

• Manufacturer: OEM for Citroën and Peugeot
• Models: Citroën Berlingo III, Fiat Doblo III, Opel Combo E K9, Peugeot Rifter, Toyota ProAce City
• Product Codes: 9812441980
• Additional Numbers: Not available

The water hose is a crucial component of the vehicle’s cooling system; regular inspection and replacement can prevent serious engine damage caused by overheating. As it is a key component in the cooling system, we recommend replacing it at the first signs of wear or damage.

This part is ideal for those seeking an economical alternative to new parts without compromising quality and performance. With our water hose, you gain assurance that your vehicle will continue to operate efficiently and safely while avoiding unexpected expenses for costly repairs.