This direct-fit alternator bracket is made for 1.4 HDi 16V engines in Citroën and Peugeot vehicles. It secures the alternator in the correct position, ensures proper belt alignment and tension, and helps maintain stable charging performance. The part is often searched by product numbers 9646424380 and 5706G3, making it easy to find when ordering or replacing the component.

Application

Fits vehicles equipped with 1.4 HDi 16V engines, including but not limited to:

• Citroën C3 (models with 1.4 HDi 16V)
• Peugeot 1007 (models with 1.4 HDi 16V)

Technical Information

• Manufacturer: Stellantis / Citroën / Peugeot
• Model: Citroën C3, Peugeot 1007 (1.4 HDi 16V)
• Product Codes: 9646424380, 5706G3
• Other Numbers: Alternative references may include the same OE codes in different notation (9646424380 / 5706G3)

Installation Recommendation

Replacement of the alternator bracket is a straightforward job for a professional mechanic or an experienced DIYer with basic tools. General steps:

1. Disconnect the negative battery terminal to avoid short circuits.
2. Relieve the drive belt tension and remove the serpentine/drive belt from the alternator pulley.
3. Support the alternator (jack or strap) to prevent it from dropping when the bracket is removed.
4. Loosen and remove the mounting bolts that secure the bracket to the engine block and the alternator.
5. Fit the new bracket, align the alternator, and start bolts by hand to ensure correct thread engagement.
6. Tighten all fasteners to the manufacturer’s specified torque values and reinstall the drive belt with correct tension.
7. Reconnect the battery and verify charging system operation and belt alignment.

Use anti-seize on studs if appropriate and replace any damaged or excessively corroded bolts. Always follow the vehicle manufacturer’s torque specifications and safety procedures.

Why It Fails Most Often

• Corrosion from road salt and moisture can weaken the bracket and mounting points.
• Metal fatigue or cracking due to engine vibration, especially if the rubber silentblock or nearby mounts have deteriorated.
• Mechanical impact or improper previous installation that bent or stressed the bracket.
• Seized or overloaded fasteners that create abnormal stress concentrations.

Replace the bracket if you observe cracks, bent mounting points, misalignment of the alternator, or unusual belt wear. A new, correctly fitted bracket restores alignment and reduces the risk of charging faults and belt failure.

Replace a worn or damaged alternator bracket in your Citroër or Peugeot vehicle with this high-quality used replacement part. This alternator bracket, bearing the original part number 5706J2, fits Citroër and Peugeot models equipped with 1.1i, 1.4i, and 1.6i engines, providing reliable and secure mounting of the alternator within the engine bay.

Suitable for models such as Citroër C3, Citroër C3 Pluriel, and Peugeot 206, 206+, and 207, this part is an ideal solution to restore the original functionality and safety of your vehicle. Using this specific bracket ensures the alternator is properly secured, which is crucial for its efficient operation and long-term durability.

Technical Information:

Manufacturer: PSA Citroër Peugeot
Model: Compatible with Citroër C3, Citroër C3 Pluriel, Peugeot 206, Peugeot 206+, Peugeot 207
Product Codes: 5706J2
Additional Numbers: The listed code is the primary identification for this part.

Since the alternator bracket is an essential component for the proper functioning of the vehicle’s charging system, regular inspection and timely replacement are important to maintain the engine in excellent condition. The bracket we offer has undergone thorough inspection and is ready for installation.

This A/C compressor bracket (OEM Reference: 9656881780 / 6453JT) provides a direct-fit mounting solution for air conditioning compressors on selected Citroën and Peugeot petrol engines. Manufactured to meet OEM geometry and load requirements, the bracket ensures correct alignment of the compressor with accessory drive components, helping to maintain belt tension and prevent premature wear. Ideal for professional garages and DIY mechanics who require a reliable replacement part identified by product codes.

Compatible Models

Citroën C3; Citroën C3 Pluriel; Citroën C4; Peugeot 206; Peugeot 206+; Peugeot 207; Peugeot 307. Compatibility applies to vehicles equipped with 1.1i, 1.4i and 1.6i engines where this bracket is specified.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Citroën C3, Citroën C3 Pluriel, Citroën C4, Peugeot 206, Peugeot 206+, Peugeot 207, Peugeot 307
• Product Codes: 9656881780, 6453JT
• Other Numbers: 6453.JT, 6453.JT (alternative notation)

Installation Recommendations

1. Prepare The Vehicle: Park on a level surface, engage the handbrake and follow standard safety procedures for working under the bonnet.
2. Relieve Drive System Tension: Loosen and remove the accessory drive belt following the manufacturer procedure to avoid damaging the belt or pulleys.
3. Support The Compressor: Securely support the A/C compressor to avoid stress on refrigerant lines. Do not disconnect refrigerant lines unless qualified and certified to work on the A/C system.
4. Remove Old Bracket: Unbolt the existing bracket, noting the position of spacers and washers. Inspect surrounding mounting points for corrosion or damage.
5. Fit New Bracket: Install the replacement bracket, using new bolts if original fasteners show wear. Tighten fasteners to the manufacturer torque specifications—refer to the factory repair manual for exact values.
6. Reassemble: Refit the compressor, restore belt tension and check pulley alignment. Start the engine and verify accessory drive operation without unusual noise or vibration.
7. Final Checks: Inspect for clearance to hoses and wiring; verify that A/C compressor engagement is smooth. If any A/C system components were disconnected, have the system checked and serviced by a certified technician.

Most Common Failure Causes

• Corrosion And Rust: Prolonged exposure to road salt and moisture can weaken the bracket and mounting points.
• Mechanical Impact: Front-end impacts or engine bay collisions can bend or crack the bracket.
• Vibration And Fatigue: Excessive vibration from worn engine mounts or misaligned pulleys can cause fatigue fractures over time.
• Incorrect Installation: Improper torqueing or reuse of damaged fasteners can lead to loosening and eventual failure.

Why Choose This Part: This bracket is supplied to match OEM fit and mounting geometry, making it a straightforward replacement for technicians familiar with Citroën and Peugeot accessory drive assemblies. Use the part numbers above when searching or ordering to ensure a fast match.

Order now to restore secure A/C compressor mounting and prevent belt misalignment or accessory-drive issues. If in doubt about removal or reinstallation, consult the vehicle service manual or a qualified technician.

This part, with the product codes 9653634080 and 180681, is a reliable choice for both professional mechanics and DIY enthusiasts. Engine mounts are subject to wear and tear over time, often leading to excess vibration and movement if not replaced promptly. Regular inspection and timely replacement of your engine mount can prevent further damage to your vehicle’s engine and transmission components.

Replacing the engine mount is generally straightforward for those familiar with automotive mechanics. You will typically need basic hand tools and should allow for a couple of hours for the job, depending on your skill level. If you’re experiencing excessive engine vibration or unusual noises during acceleration, it may be time to inspect your engine mount.

Technical Information

• Manufacturer: PSA
• Models: Citroën C2, C3, DS3; Peugeot 1007, 2008, 207, 208, 301
• Product Codes: 9653634080, 180681
• Other Numbers: 180681

This high-quality engine mount is designed specifically for Citroën and Peugeot vehicles, providing essential support and vibration absorption between the engine and the vehicle chassis. Compatible with popular models such as Citroën C2, C3, DS3 and Peugeot 1007, 2008, 207, 208, and 301, this part ensures optimal engine stability and contributes to a smoother driving experience.

The engine mount plays a crucial role in securing the engine in place, preventing excessive movement that can lead to drivetrain wear or damage. Over time, engine mounts can deteriorate due to exposure to heat, mechanical stress, and engine vibrations, which can cause increased engine noise, vibration felt inside the cabin, or uneven engine movement.

Replacing a worn or damaged engine mount is important to maintain vehicle performance and comfort. Installation typically involves safely supporting the engine, removing the old mount, and securing the new mount using the appropriate fasteners. It is advisable to check engine alignment after replacement to ensure proper fitment and functionality.

Technical Information

• Manufacturer: PSA (Peugeot Citroën)
• Model Compatibility: Citroën C2, C3, DS3; Peugeot 1007, 2008, 207, 208, 301
• Product Codes: 9681675280, 180696
• Additional References: Fits variants with 1.1i, 1.4i, 1.4 16V, 1.4 HDI, 1.6 HDI, and 1.8 16V engines

Why Replace Engine Mounts?

Engine mounts are subject to wear due to constant engine movement, exposure to heat and oil leaks. Worn mounts may cause engine vibrations to be transmitted to the chassis, leading to uncomfortable driving conditions and potential damage to other components. Timely replacement with a quality mount like this product helps extend engine and drivetrain lifespan.

Installation Tips

For best results, use proper lifting equipment to support the engine during replacement. Inspect surrounding components for damage or wear, and ensure all bolts are torqued to manufacturer specifications. If uncertain, professional installation is recommended to guarantee safety and optimal performance.

This heavy-duty compressor bracket is designed to secure the air conditioning compressor on Citroën and Peugeot models equipped with 1.4 VTI and 1.6 VTI engines. Ideal for professional mechanics and experienced DIY enthusiasts, the bracket restores correct compressor alignment, reduces vibration transfer to the engine block and accessory drive, and helps prevent premature belt and bearing wear. The part is frequently searched by part numbers — include 758078180, 9808515080, 6453YH and V758078180-01 when checking fitment.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Citroën Berlingo B9; Citroën C4 II; Peugeot 207; Peugeot 308; Peugeot Partner III
• Product Codes: V758078180-01; 758078180; 9808515080; 6453YH
• Additional Numbers: 6453.Yh; 78180; 78180; V758078180; 758078180

Compatibility And Fitment

Fits vehicles from the Stellantis group equipped with the 1.4 VTI and 1.6 VTI petrol engines as fitted to the models listed above. Always confirm engine type and mounting layout visually — brackets can differ between engine versions and model years. This bracket is intended to match original mounting points and restore OEM geometry.

How The Part Is Replaced

• Prepare The Vehicle: Park on level ground, secure with handbrake, lift and support with jack stands if necessary.
• Safety And Refrigerant: If the compressor or refrigerant lines must be disconnected, have the air conditioning system evacuated and later recharged by a certified technician in accordance with regulations.
• Remove Drive Belt: Release belt tensioner and remove the serpentine/accessory belt to relieve load on the compressor.
• Support Compressor: Use a strap or support to hold the compressor in place so hoses are not stressed.
• Unbolt And Replace: Remove mounting bolts, detach the old bracket, compare fitment, fit the new bracket and tighten bolts to the manufacturer’s torque specification.
• Reassembly: Reinstall the compressor and belt, restore belt tension, and if refrigerant lines were opened, evacuate and recharge the system professionally. Check for proper alignment and belt tracking.

Installation Recommendations

• Use New Fasteners Where Required: Replace damaged or stretched bolts and nuts; use correct grade hardware.
• Follow Torque Specs: Tighten all mounting bolts to the workshop manual values to avoid cracking or loosening.
• Inspect Compressor Bearings And Pulley: Excessive play or noise in the compressor can overload the new bracket and should be addressed before installation.
• Protect Threads: Apply appropriate anti-seize or threadlocker according to manufacturer guidance when reassembling.
• Check Belt Condition And Alignment: Replace worn belts and ensure pulleys are aligned to avoid premature wear.

Most Common Failure Causes

The bracket itself is typically a long‑life component, but common reasons for replacement include:

• Corrosion And Rust: Exposure to road salt and moisture can weaken the bracket or its fixings.
• Compressor Seizure Or Bearing Failure: A stuck or overloaded compressor transfers excessive forces to the bracket causing cracks or deformation.
• Mechanical Impact: Front-end collisions or engine/transmission movement after a failed mount can damage the bracket.
• Loose Or Stripped Fasteners: Vibrations and insufficient torque can lead to loosening, resulting in misalignment and eventual failure.

Symptoms Indicating Bracket Damage: Unusual accessory belt noise, visible misalignment of the compressor pulley, increased vibration in the engine bay, or rapid belt wear. On high‑mileage vehicles or after compressor failure, inspection of the bracket is recommended during AC repairs.

Notes For Buyers: This part is commonly listed under the referenced product codes — searching by these numbers accelerates identification. It is intended as a direct replacement for original mounting geometry and is suited for workshops and competent DIYers comfortable with accessory drive and AC system procedures.

With compatibility for various models including those equipped with 1.4 HDI, 1.6 HDI, and 2.0 HDI engines, this rubber bush offers an excellent replacement solution for worn-out parts. Typically, engine mounts deteriorate due to wear and tear over time, leading to increased vibrations and noise during engine operation. Therefore, it is advisable to check and replace them every 40,000 to 60,000 miles, or sooner if you notice any signs of damage.

Replacing the engine mounting rubber bush is a straightforward process that can be performed without professional assistance. Simply lift the vehicle, remove the old bush, and install the new one using basic hand tools. Ensure that the new bush is securely fastened to prevent any movement that could lead to further issues.

Technical Information

• Manufacturer: PSA
• Model: Citroën Peugeot
• Product Codes: 184477
• Additional Codes: N/A

Engine mounts are crucial as they absorb vibrations and shocks from the engine, providing a smooth driving experience. Over time, engine mounts can wear out due to exposure to heat, engine vibrations, and road conditions, typically requiring replacement every 50,000 to 100,000 miles, depending on usage.

This specific engine mount is compatible with multiple models, guaranteeing a precise fit and easy installation for both professional mechanics and DIY car enthusiasts. Regular checks and timely replacements help prevent further damage to engine components and enhance overall vehicle safety.

Technical Information

• Manufacturer: Citroën Peugeot
• Model: 1.4i, 1.4 16V, 1.4 HDI
• Product Codes: 9680119880, 1807AV
• Additional Numbers: 1807AV, 9680119880

Replacing the engine mount is typically straightforward for those familiar with automotive repairs. It’s generally accessible from the top or bottom of the engine bay, depending on the model. It is recommended to check the engine mount condition during routine maintenance and to replace it every 50,000 to 100,000 miles, or at any sign of damage, such as excessive vibrations or engine misalignment.

Compatible models include a range of Citroën and Peugeot vehicles featuring the 1.4 HDI engine. Ensure you verify compatibility with your vehicle model before purchasing.

Technical Information

• Manufacturer: PSA
• Model: Citroën, Peugeot
• Product Codes: 1807HF, 1807S2, 1807S4, 1807W6
• Additional Numbers: 1807S2, 1807S4, 1807W6