This high-quality replacement rear wiper motor is designed for Citroën C3 II (A51) vehicles and carries the OEM reference numbers 9683382380 and 6405QJ. Ideal for professional workshops and DIY mechanics, the unit restores reliable rear wiper function, ensures proper park positioning and smooth intermittent wiping, and is a direct-fit component that simplifies installation.

Key Features

– Direct-fit replacement for the rear tailgate wiper assembly of Citroën C3 II (A51).
– OEM Reference Numbers: 9683382380, 6405QJ — commonly used in spare-part searches.
– Restores wiping force and correct park position; compatible with factory linkage and mounting points.

Technical Information

• Manufacturer: Stellantis / Citroën
• Model: Citroën C3 II (A51)
• Product Codes: 9683382380, 6405QJ
• Other Numbers: 6405QJ | 9683382380

How The Part Works

The rear wiper motor converts electrical energy into rotational motion and transmits that motion through a small gearbox and linkage to move the rear wiper arm across the glass. It includes internal brushes, a small DC motor, and reduction gears that provide the torque required to clear water, dirt and debris. The park switch or gearing ensures the blade returns to its resting position when the wiper is switched off.

Typical Failure Modes And Lifespan

Rear wiper motors usually last many years, but common failure causes include:

• Water Ingress And Corrosion: Seals or booting can fail, allowing moisture to reach brushes and contacts.
• Worn Brushes Or Commutator: Electrical wear reduces motor performance and leads to intermittent operation or total failure.
• Gear Or Linkage Wear: Plastic gears can strip or linkage joints can seize, limiting movement or causing noise.
• Electrical Connection Problems: Corroded plugs or damaged wiring can interrupt current flow.

Typical service life depends on usage and environment; 8–15 years is common in normal conditions, shorter in areas with heavy salt exposure or frequent use.

Replacement Procedure (Overview)

Intended for experienced technicians and competent DIYers. Basic replacement steps:

• Park Vehicle And Remove Key: Ensure ignition is off.
• Disconnect The Battery: Always disconnect the negative terminal before working on electrical components.
• Remove Rear Wiper Arm: Free the arm from the splined shaft (cover cap or retaining nut may need removal).
• Access Tailgate Trim: Remove interior tailgate trim to expose the motor and linkage (retain fasteners and clips).
• Disconnect Electrical Connector: Carefully unplug the motor harness.
• Unbolt Motor Assembly: Remove mounting bolts and extract the motor with linkage; transfer any reusable linkage or seals if required.
• Fit New Motor: Mount the replacement unit, reconnect the plug and test operation before reassembling trim.
• Reinstall Trim And Wiper Arm: Align the wiper arm to the correct park position and secure. Reconnect the battery and perform a functional test.

Always check that the wiper parks correctly and that there is no binding in the linkage before final assembly.

Installation Recommendations

• Use Correct Tools: Torx/sockets and trim tools reduce risk of damage to clips and panels.
• Test Before Reassembly: Connect battery and cycle the wiper to verify correct direction, speed and park position before reinstalling interior trim.
• Seal And Protect: Inspect tailgate seals and drain holes; replace any deteriorated gaskets and apply dielectric grease to connectors to prevent corrosion.
• Tightening: Secure mounting fasteners firmly but avoid over-torquing plastic components.

Why This Part Fails Most Often

Moisture penetration and contamination are the leading causes—rusted connectors, corroded motor internals and worn brushes. Mechanical overload from frozen wipers, damaged blades or bent linkage also accelerates gear wear or causes the motor to stall. Preventive measures include keeping seals intact, clearing tailgate drains, and replacing wiper blades as they age to avoid excessive resistance on the motor.

Notes For Professionals

This motor is referenced by OEM codes 9683382380 and 6405QJ; include these numbers in parts searches to improve findability. Suitable for mechanics and experienced DIYers who require a direct-fit solution for Citroën C3 II (A51) rear wiper faults.

Warranty And Quality

Check the seller’s warranty and return policy. Using the correct OEM-coded replacement helps ensure fitment and long-term reliability.

The Rear Wiper Mechanism for the Peugeot 407 SW is a direct-fit solution designed to restore reliable rear-window wiping and park functions. This unit includes the mechanical gearbox, bearing and microswitch assembly; the bearing and microswitch on this particular item are functional. Ideal for professional workshops and experienced DIYers who look up parts by OEM number: the mechanism matches common Peugeot/Stellantis product codes and replaces worn or noisy rear wiper linkages and motors on estate models.

Key Benefits

Reliable Mechanical Replacement: Restores correct sweep and park position of the rear wiper arm. Improved Visibility: Eliminates streaking and erratic wiping caused by worn gears or seized pivots.OEM Compatibility: Frequently Searched By Part Number For Fast Identification In Repair Shops And Online Catalogs.

Fitment

• Peugeot 407 SW (Estate)

Technical Information

• Manufacturer: Stellantis (Peugeot/Citroën)
• Model: Peugeot 407 SW
• Product Codes: 9651000780, 9637858580, 6405Z1
• Additional Numbers: 6405K3, 6405K4, 6405K5, 450343, 6936C2

Function And Common Faults

The rear wiper mechanism transfers rotary motion from the motor into the sweep movement of the wiper arm and contains internal gears, bearings and a microswitch that detects park position. Typical failure modes include gear wear or stripping, bearing seizure from corrosion or contamination, water ingress into the motor/gearbox and failure of the park microswitch. When these components deteriorate, symptoms include noisy operation, incomplete sweep, wiper arm not parking correctly, or complete loss of rear wiper movement.

Replacement Procedure (Overview)

Replacement is straightforward for experienced technicians and competent DIYers with basic workshop tools:

• Remove The Rear Wiper Arm: Pry off the wiper cap, remove the retaining nut and lift the arm free.
• Remove Tailgate Trim: Open Tailgate And Carefully Remove Interior Trim Panel To Access The Mechanism (Retain Clips And Fasteners).
• Disconnect Electrical Connector: Unplug The Wiper Motor Connector And Any Linked Harnesses.
• Unbolt The Mechanism: Unscrew Fasteners Holding The Gearbox/Mounting Plate, Free The Unit From The Tailgate.
• Install New Unit: Position The Replacement Mechanism, Tighten Fasteners To Manufacturer Torque Where Available, Reconnect Electrical Connector.
• Refit Trim And Wiper Arm: Reinstall Interior Trim, Refit Wiper Arm To Correct Park Position And Secure Nut.
• Function Test: Cycle The Rear Wiper To Confirm Sweep Range, Park Position And Absence Of Unusual Noise.

Installation Recommendations

• Disconnect The Battery Before Starting Work To Avoid Short Circuits And Unintended Motor Operation.
• Protect Interior Trim Clips And Fasteners During Removal To Prevent Breakage.
• Check The Wiper Arm Splines And Replace The Arm Or Washer If Excessive Play Is Found.
• Ensure The Mechanism Is Correctly Aligned So The Wiper Parks In The Designated Position.
• Apply Dielectric Grease To Electrical Connectors If Corrosion Is Present; Lubricate Pivot Points With Suitable Grease During Reassembly.

Why The Part Most Commonly Fails

Rear wiper mechanisms are exposed to weather, road salt and moisture, which promote corrosion and contamination. Repeated mechanical load and occasional shock (ice, blockage) accelerate wear of plastic or metal gears and bearings. Water ingress can short the motor or cause the park microswitch to fail. Lack Of Lubrication And Physical Damage From Snow/Ice Are Frequent Causes Of Premature Failure.

Notes For Buyers

Searches For This Part Often Use The OEM Numbers Listed Above; Entering These Codes In Online Catalogs Or Workshop Systems Will Help Confirm Fitment. This Unit Is Suited For Professional Replacement Or Confident DIY Installation By Someone Familiar With Tailgate Trim Removal And Basic Electrical Disconnection.

This replacement rear wiper motor is designed for Peugeot 407 SW and is often searched by OEM numbers 9646500880, 54906212 or 6405R1. Built to restore reliable operation of the tailgate wiper, the unit drives the wiper arm with the correct torque and speed to clear the rear glass in wet and winter conditions. Ideal for professional workshops and DIY mechanics who value correct fitment and quick installation.

Technical Information

• Manufacturer: Stellantis Citroën Peugeot
• Model: Peugeot 407 SW
• Product Codes: 9646500880, 54906212, 6405R1
• Other Numbers: NFP

Function And Fitment

The rear wiper motor converts electrical input into rotational motion for the rear wiper arm. It is mounted on the tailgate and connected to the wiper linkage; proper operation ensures the rear window is wiped clean for improved visibility. This unit fits the Peugeot 407 SW rear hatch and is commonly ordered using the product/part numbers listed above to ensure exact compatibility.

Common Failure Modes

Rear wiper motors typically fail due to moisture ingress that causes corrosion, worn commutator brushes or bearings, stripped internal gears, or electrical connector/circuit faults. Symptoms include no movement, intermittent operation, slow or noisy motion, grinding sounds, or a wiper arm that stops in the wrong position. Heavy snow, blocked wiper movement and long-term exposure to road salt accelerate wear.

Installation Recommendations

Installation is straightforward for a trained technician or an experienced DIYer. General steps:

• Support the tailgate and remove interior trim to access the motor.
• Remove the wiper arm (mark its rest position) and disconnect the electrical connector.
• Unbolt the motor from the tailgate and detach the linkage from the motor spline.
• Install the new motor, reattach the linkage in the marked position, tighten mounting bolts to manufacturer torque, reconnect the electrical plug and refit interior trim.
• Test operation through all park positions and ensure the wiper parks correctly. Apply light grease to splines if needed and ensure connectors are dry and protected against corrosion.

Why Replace

Replace the rear wiper motor when the wiper is non-functional, moves intermittently, produces abnormal noise, or if the motor overheats. Replacing the motor restores clear rear visibility, reduces the risk of further damage to the linkage, and ensures safe reversing and poor-weather driving.

Ordering tip: Many mechanics and DIY customers search by OEM numbers (9646500880, 54906212, 6405R1) to find the correct rear wiper motor for Peugeot 407 SW quickly—include these codes when searching to speed up part identification.

High-quality Valeo rear window wiper motor compatible with Citroën C5 I and C5 II estate models. Supplied under multiple reference numbers commonly used in parts catalogues, this electric motor drives the rear wiper arm and mechanism to ensure clear rear visibility in wet conditions. Ideal for mechanics and DIY enthusiasts who search by part number (9638335780, 54904512, 6405K1).

Key Features

Reliable electric motor with integrated reduction gearing designed for the rear tailgate wiper linkage. Robust design to withstand regular use and the environmental exposure typical for tailgate-mounted components. Direct-fit replacement for OE-mounted units on compatible Citroën C5 estate models, matching original mounting points and electrical connector.

Technical Information

• Manufacturer: Valeo
• Model: Citroën C5 I Estate, Citroën C5 II Estate
• Product Codes: 9638335780, 6405K1, 54904512, 03
• Other Numbers: NFP (as listed in supplier data)

Function

The unit provides the rotational drive for the rear wiper arm via an electric motor and gearbox. It converts electrical energy (12 V system) into controlled mechanical movement transmitted through the wiper linkage to clear the rear window.

Common Symptoms Of Failure

• Rear wiper does not move at all despite ignition on.
• Intermittent operation or loss of torque—wiper moves slowly or stalls under load.
• Unusual grinding or clicking noises from the tailgate area.
• Wiper stops in wrong position or does not park correctly.

Why The Part Usually Fails

Failures are most often caused by water ingress and corrosion of the gearbox or motor brushes, wear of internal gears, or mechanical overload when the wiper arm is frozen to the glass. Electrical issues such as worn brushes, poor connector contacts, or short circuits can also lead to malfunction. Exposure to road salt and repeated cycling accelerates wear.

Replacement Guide

Basic steps for replacement (for experienced mechanics or competent DIYers):

• Disconnect the vehicle battery before starting work to prevent short circuits.
• Remove the rear wiper arm: lift the cap, undo the retaining nut, and slide the arm off the splined shaft.
• Remove interior tailgate trim to access the motor and wiring harness (careful with plastic clips and trim fasteners).
• Unplug the electrical connector from the motor and remove the motor mounting bolts.
• Fit the replacement motor, secure mounting bolts to manufacturer recommendations, reconnect the electrical plug and reassemble trim.
• Refit the wiper arm, set correct park position, tighten the retaining nut and test operation through its full sweep at different ignition positions.

Installation Recommendations

• Always disconnect the battery before removal and follow the vehicle manufacturer’s instructions to avoid damage to electrical systems.
• Inspect the wiper arm, linkage and mounting splines for wear or play; replace worn components to prevent early failure of the new motor.
• Apply a light anti-seize to the spline if assembly conditions require, and ensure the wiper arm is correctly indexed during reassembly.
• After installation, verify smooth operation and correct park position; check for abnormal noises or binding across the full sweep.

Suitability And Notes

This motor is intended as a direct replacement for rear wiper applications on Citroën C5 I and II estate variants carrying the listed part numbers. Always match the part number listed on the old unit with the codes above to ensure correct fitment. Searching by OE number such as 9638335780 or 54904512 will typically locate this exact item in parts databases.

Why Choose This Part

Designed to the fit, form and function expected for OE-style replacements, this Valeo rear wiper motor offers a straightforward solution to restore rear visibility and eliminate symptoms such as non-operation, poor torque, or noisy movement. Clear part-number referencing makes ordering and inventory control easier for workshops and independent mechanics.

Part description

The rear wiper motor is a key part of the rear window wiper mechanism – it ensures smooth movement of the arm and a safe view in bad weather. This used part is suitable as a quick and affordable replacement if the original rear wiper motor fails. It is mainly searched for under the number 9819523180.

Technical information

• Manufacturer: Stellantis
• Model: Citroën C4 Picasso II; Peugeot 308 T9
• Other numbers: not specified

Product codes

• Product codes: 9819523180

Installation recommendations

• Before assembly, check the condition of the connector and wiring in the lid/rear door area (wire breaks in the grommet are common).
• Check the free movement of the wiper mechanism and arms – rubbing can put excessive strain on the engine.
• After installation, test the function of the wiper and washer and check that the engine runs without irregular noises.

Reasons why the part is damaged

• Stiffened mechanism or stuck wiper arm (motor overload).
• Intrusion of moisture into the motor or connectors and subsequent corrosion.
• Damaged wiring in the bend of the rear door/lid (broken wires, fluctuating power supply).
• Excessive stress when the wiper is frozen or when there is a mechanical obstacle on the glass.

Part description

Used wiper motor intended for Peugeot 207 in the wiper mechanism category. It is an electrical component that drives the wiper mechanism – in the event of a malfunction, it is typically manifested by non-functional wiping, irregular operation or stopping in an inappropriate position. If you are looking for a part by number, you can find all product numbers listed in the description below for quick pairing.

Technical information

• Manufacturer: Stellantis (CITROEN / PEUGEOT)
• Model: Peugeot 207
• Other numbers: 3397020769, 6405CH

Product codes

• Product codes: 9650380780, 3397020769, 6405CH

Installation recommendations

Generally/typically for this type of part, the exact steps may vary depending on the specific car design and wiper mechanism used.

1) Before assembly (checks of the used part, what to compare with the old part)

• Check if the part number (9650380780, or 3397020769, 6405CH) matches the old engine or the marking on the original part.
• Compare connector (shape, number of pins, locking) and mechanical attachment.
• Inspect the motor body for cracks, damage to the threads/mounts and the condition of the contacts (oxidation).
• Make sure the wiper mechanism is not hardened/rusted – overstressing will often destroy even a new motor.

2) Necessary tools and materials (in general, without specific extra parts)

• Basic set of keys and sockets
• Screwdrivers / plastic pry bar for removing covers and upholstery
• Pliers, or a small clip hook
• Electrical contact cleaner (recommended)
• Protective gloves, rag

3) Step-by-step assembly procedure

1. Turn off the ignition and secure the vehicle against movement.
2. Disconnect the negative terminal of the battery (recommended for electrical parts due to short circuits and installation errors).
3. Get access to the wiper motor by removing the relevant covers/trimmings (depending on the car model).
4. Disconnect the motor electrical connector – do not pull on the wiring, release the connector fuse first.
5. Mark the position/placement of the part (e.g. cable routing and mounting) so that the installation is the same.
6. Undo the motor mounting screws/mounts and remove the motor.
7. Check the condition of the mechanism, rods and moving parts – they must move freely, without binding.
8. Clean the connector contacts and the attachment area from dirt and corrosion.
9. Install the motor in its original place and secure it with fasteners.
10. Connect the electrical connector and check that the latch clicks properly.
11. Reinstall all the removed covers/trims and check that nothing rubs and the wiring is not pinched.
12. Connect the battery.
• 4) Post-assembly checks and test drive/function verification
  • Verify the function of the wiper in all available modes (switching, interval, return to rest position – depending on the car’s equipment).
  • Check if the operation is slow, irregular or excessively noisy.
  • After a short drive, double check that everything is firmly attached and that the trim has not come loose anywhere.

  5) The most common assembly mistakes + how to avoid them

  • Pinched or twisted wiring – run the harness as originally and check the grommets.
  • Non-snap connector – always pull gently after plugging in to verify locking.
  • Assembly without checking the mechanism – stiffened mechanism overloads the motor and shortens its life.
  • Contaminated/oxidized contacts – clean the connector, you will prevent blackouts and transient resistances.

  Reasons why the part is damaged

  • Stiff wiper mechanism (corrosion, dirt) → the engine is working in overload.
  • Water and moisture in the engine compartment → corrosion, short circuits, damage to electronics/commutator.
  • Wear of carbons and commutator in older pieces.
  • Oxidation of connectors and increased transition resistance → blackouts or overheating.
  • Mechanical damage during unprofessional disassembly (broken handles, damaged connectors).
  ]]> https://www.usedpartsvendor.com/electro-components/wiper-mechanisms/207-wiper-mechanisms/peugeot-207-rear-wiper-motor-0390201813-9652418780/ Wed, 14 Jan 2026 03:00:39 +0000 https://www.usedpartsvendor.com/uncategorized/peugeot-207-rear-wiper-motor-0390201813-9652418780/ Rear wiper motor for PEUGEOT 207 cars

  Part description

  Used rear wiper motor designed for Peugeot 207. It is an electrical component from the category of wiper mechanisms, which ensures the drive of the rear wiper and thus the correct function of wiping the rear window. Thanks to traceable part numbers, it is suitable as a replacement in the event of a malfunction of the original motor, when the wiper does not work, works irregularly or stops.

  Technical information

  • Manufacturer: Stellantis (CITROEN / PEUGEOT) / not specified
  • Model: Peugeot 207
  • Other numbers: 6405AN

  Product codes

  • Product codes: 0390201813, 9652418780

  Installation recommendations

  Generally/typically, the following procedure applies to replacing the rear wiper motor (exact steps may vary depending on the specific car model):

  1) Before assembly

  • Compare the part numbers from the tag/casting: 0390201813, 9652418780 and possibly 6405AN with the old piece.
  • Check the connector(s): same shape, number of pins, undamaged securing.
  • Inspect the motor body and the area around the output (shaft/axle): no cracks, no signs of leakage and significant corrosion.
  • If a bearing surface/seal is included, check that it is clean and undamaged.

  2) Necessary tools and materials

  • Basic set of ratchets and extensions / keys
  • Screwdrivers / torx bits (according to design)
  • Plastic crowbar for removing upholstery/covers
  • Contact cleaner (recommended), cloth
  • Protective gloves

  3) Step-by-step assembly procedure

  1. Turn off the ignition and disconnect the battery for safety reasons.
  2. Provide access to the rear wiper motor by removing the necessary internal covers/trimming at the mounting location (typically plastic parts – be careful not to break the mounts).
  3. Disconnect the electrical connector from the engine – release the connector lock first.
  4. Remove the engine fasteners (bolts/nuts depending on design).
  5. Remove the original motor and check around the mount (cleanliness, traces of water, corrosion).
  6. Clean the contact surface and possibly the connector/pins (contact cleaner should be used).
  7. Install the used motor in its original position and fit the fasteners.
  8. Tighten the fasteners adequately and evenly so that the motor fits properly and there is no tension.
  9. Connect the electrical connector and verify proper snapping/locking.
  10. Reinstall the removed covers/trims.
  11. Connect the battery.

• 4) Post-assembly checks and test drive/function verification

  • Check that the rear wiper runs smoothly and does not stop.
  • Check for unusual noises (scratching, skipping) that may indicate a problem with the mechanism or attachment.
  • After a short drive/test, visually check the connector and motor mount again.

  5) The most common assembly mistakes + how to avoid them

  • Part swap by appearance – always compare numbers 0390201813 / 9652418780 (and 6405AN if listed).
  • Not clicked connector – leads to outages; check the arrest after connecting.
  • Damage to the plastic cover handles – use a plastic pry bar and proceed without violence.

  Reasons why the part is damaged

  • Leakage and moisture in the engine compartment – corrosion, oxidation of connectors and internal engine damage.
  • Mechanical overload (stuttering of the mechanism, increased wiper resistance) – the engine overheats and its service life is shortened.
  • Wear due to age and frequent use.
  • Electrical problems (increased transient resistance in connectors, damaged wiring) – erratic operation and overheating.
  ]]> https://www.usedpartsvendor.com/electro-components/wiper-mechanisms/308-t9-wiper-mechanisms/wiper-mechanism-peugeot-308-t9-9810327980-3397021828/ Wed, 26 Nov 2025 03:09:02 +0000 https://www.usedpartsvendor.com/uncategorized/wiper-mechanism-peugeot-308-t9-9810327980-3397021828/ Front wiper lever mechanism for Peugeot 308 T9 cars

  The front wiper mechanism for Peugeot 308 T9 cars is an important part for safe driving in rain, snow and poor visibility. This part ensures the smooth and precise operation of the wipers, the correct pressure of the slats on the glass and uniform wiping, so that the driver always has the best possible view from the vehicle.

  This is an original wiper lever mechanism for Peugeot 308 cars of the T9 generation, which is suitable as a replacement for a damaged or worn piece – for example, when there is play in the rods, stuttering, irregular operation or complete failure of the wipers. A properly functioning wiper mechanism extends the life of the arms and wiper blades and reduces noise during operation.

  Technical information:
  Manufacturer: PSA / CITROEN / PEUGEOT
  Model: Peugeot 308 T9 (front wiper lever mechanism)
  Product codes: 9810327980, 3397021828
  Other numbers: they may differ on the label or casting according to the specific production series, the above codes are the basic identification

  This mechanism is intended for the front wipers, it is mounted between the wiper motor and the wiper arms and transfers the rotational movement of the motor to the rocking movement of the arms. It is especially suitable for car mechanics and home-builders who are looking for a replacement according to the original part number and want to be sure of compatibility with Peugeot 308 T9 cars.

  Installation recommendations:
  – Before dismantling the old mechanism, mark the position of the wiper arms on the glass so that the correct starting position can be set after installation.
  – Before the actual replacement, disconnect the vehicle battery to prevent the wiper motor from starting unintentionally.
  – Check the condition of the wiper motor, arms and bearings – in case of significant wear, it is advisable to replace several parts at once.
  – During assembly, tighten the screws and nuts according to the manufacturer’s recommended torques to prevent loosening or, conversely, deformation of the bearing.
  – After installation, test the entire operation of the wipers both dry and with a spray – observe the smoothness of movement, noise, possible rubbing or bumping into the extreme positions.
  – For a longer life of the mechanism, we recommend regularly checking the cleanliness of the area under the windshield, where dirt, leaves and moisture often get into the mechanism.

  ]]> https://www.usedpartsvendor.com/electro-components/wiper-mechanisms/xsara-picasso-wiper-mechanisms/wiper-motor-citroen-xsara-picasso-53011912-9631473680-6405g7-2/ Mon, 10 Nov 2025 03:03:29 +0000 https://www.usedpartsvendor.com/uncategorized/wiper-motor-citroen-xsara-picasso-53011912-9631473680-6405g7-2/ VALEO rear wiper motor for Citroen Xsara Picasso

  Original rear wiper motor (fifth door wiper drive) for Citroën Xsara Picasso. This is a used, fully functional OEM part from the manufacturer VALEO – exactly the type that was installed by the car manufacturer. An ideal replacement when the rear wiper is not working or is running slowly. Also searched under numbers 53011912, 53011909, 9631473680, 6405.G7 (6405G7).

  Main advantages
  – Original VALEO/PSA – correct geometry, quiet and smooth operation
  – Tested before disassembly, ready for assembly
  – Exact fit for Xsara Picasso, no modifications
  – Excellent price-life ratio compared to non-original new parts

  Compatibility
  – Citroën Xsara Picasso (all engines and equipment within this generation)
  – To verify a match, compare the OEM number and the connector on your original part

  Technical information
  – Location: rear wiper (fifth door)
  – Manufacturer: VALEO (OEM for PSA)
  – Power supply: 12 V
  – Type: electric motorcycle with gearbox and parking function
  – The connector and mounting pitch correspond to the original Xsara Picasso
  Note: wiper arm and shaft nut are usually not included; we deliver what is shown on the product photos in the e-shop.

  OEM and equivalent part numbers (for search)
  – PSA: 6405.G7 (6405G7), 9631473680
  – VALEO: 53011912, 53011909
  Use these numbers to accurately verify compatibility.

  When to replace the rear wiper motor
  – The rear wiper does not respond at all or stops by itself
  – Slow, erratic running, “jerking” or unadjustable parking position
  – Distinct humming, backlash in the transmission, signs of grinding after prolonged inactivity

  Assembly tips
  – Before assembly, check the seal of the grommet and the drainage of the fifth door (water can damage the motor)
  – Adjust the parking position of the wiper arm after tightening
  – Check the condition of the arm and wiper pin, or lightly lubricate the grooves
  – Recommended installation by a person with knowledge of automotive electronics; avoid reverse polarity

  Condition of goods
  – Used original part, tested, with normal cosmetic traces from use, no effect on function

  You are looking for: Citroën Xsara Picasso rear wiper motor, Xsara Picasso fifth door wiper motor, VALEO 53011912, 53011909, 9631473680, 6405G7.

  ]]> https://www.usedpartsvendor.com/electro-components/wiper-mechanisms/c-elysee-wiper-mechanisms/wiper-motor-mechanism-citroen-c-elysee-peugeot-301-9675018280/ Mon, 03 Nov 2025 03:02:01 +0000 https://www.usedpartsvendor.com/uncategorized/wiper-motor-mechanism-citroen-c-elysee-peugeot-301-9675018280/ Front wiper mechanism with electric motor for CITROEN C-ELYSEE PEUGEOT 301

  Original used front wiper mechanism with electric motor for Citroën C‑Elysée and Peugeot 301. Ideal replacement for play in the rods, stuttering or non-functioning return to the parking position. Thanks to the OEM number 9675018280, you can easily verify compatibility – just compare the number to your original part or send us the VIN.

  Main advantages
  – Complete assembly: wiper motor + linkage/mechanism (without wiper arms unless otherwise indicated in photos)
  – Original PSA part – exact assembly, correct stroke and parking position
  – Field tested, quiet operation and smooth range checked
  – Quick solution to typical faults: knocking rods, slow running, irregular running, not returning to zero

  Technical information
  – Designation: front wipers (left hand drive LHD – check with OEM)
  – Power supply: 12 V (passenger cars)
  – OEM/PSA part number: 9675018280 (also searched as 96 750 182 80)
  – Mounting: serial mounting points on the engine compartment bulkhead
  – Material: metal tie rod + beam, electric motor with integrated gearbox
  – Condition: used, fully functional; normal cosmetic signs of use without affecting function

  Compatibility
  – Citroën C‑Elysée (from approx. 2012 →)
  – Peugeot 301 (from approx. 2012 →)
  Note: Manufacture years and trims may vary. The most reliable match is the OEM number 9675018280. If in doubt, give the VIN.

  Package contents
  – Front wiper mechanism with electric motor (complete)
  – Not included: wiper arms and strips/rubbers (if not in photos)

  Assembly tips
  – Before assembly, disconnect the battery and check the free movement of the tie rods.
  – Set the engine to the parking position, then fit the wiper arms.
  – Tighten the arm nuts in the zero position to prevent a collision with the hood.
  – After assembly, test all speeds and interval.

  Why buy from us?
  – Verified origin, part tested before shipping
  – Fast shipping, careful packaging
  – Possibility of consulting with compatibility according to VIN

  Keywords (SEO)
  Citroën C‑Elysée wiper motor, Peugeot 301 wiper mechanism, Citroen/Peugeot front wipers, OEM 9675018280, used original part, C‑Elysée 301 wiper link

  Are you looking for assurance that the part will fit perfectly? Compare the 9675018280 with your original part and you are done.

  ]]>