Product Overview

High-quality electric window regulator assembly designed for the left front (driver side) door of Citroën C3 II (A51) vehicles. This complete unit includes the electric motor and a 6-pin connector for direct replacement of worn or damaged regulators. Frequently searched under the OEM/product numbers 9221FR and 9802617780, this part is aimed at professional mechanics and DIY enthusiasts who require a reliable, OEM-compatible solution to restore smooth window operation.

The regulator ensures precise glass movement and quiet operation when raising or lowering the window. Fitting this unit will eliminate common symptoms such as slow or jerky window travel, excessive noise, or a window that does not stay in position. Ideal for garage repairs and workshop use, the assembly reduces installation time thanks to its integrated motor and standard connector.

Technical Information

• Manufacturer: Stellantis / Citroën
• Model: Citroën C3 II (A51) — Left Front (Driver Door)
• Product Codes: 9221FR
• Other Numbers: 9802617780

Fitment And Compatibility

Fits Citroën C3 II models designated A51 for the left front door. Always verify the connector type (6-pin) and mounting layout against the removed unit to ensure a correct match. This part is commonly referenced by its product codes (9221FR / 9802617780) in parts catalogs and online searches.

Installation Recommendations

• Before starting work, disconnect the negative battery terminal to avoid short circuits and protect vehicle electronics.
• Remove the door trim panel using appropriate trim tools to avoid damaging clips and upholstery.
• Carefully lower the glass (if possible) and secure it in position or support it after detaching from the regulator.
• Disconnect the 6-pin electrical connector from the motor and unbolt or drill out the fixing rivets/bolts securing the old regulator as required.
• Transfer any necessary clips or guide fittings to the new regulator, position the unit, and fasten according to the original mounting points.
• Reconnect the motor connector, temporarily reconnect the battery, and test window function before final reassembly to confirm correct operation and alignment.
• After verification, disconnect the battery again, complete the trim reassembly and torque fasteners to manufacturer recommendations.

Recommended Tools: Panel trim tools, Torx/Phillips drivers, socket set, rivet drill or rivet tool (depending on original fixings), multimeter for electrical checks. Typical workshop time: 1–2 hours depending on experience and door trim complexity.

Why This Part Most Often Fails

• Motor Wear: Repeated cycles over time cause the motor brushes and gears to wear, reducing torque and causing slow or failed movement.
• Water Ingress / Corrosion: Moisture inside the door can corrode electrical connections and mechanical tracks, leading to increased friction or electrical failure.
• Broken Plastic Components: Sliders, clips, or guides made of plastic can fracture, causing the regulator to bind or the glass to misalign.
• Cable Or Track Damage: On cable-driven regulators, frayed cables or worn tracks allow slippage and uneven glass movement.
• Overload And Misuse: Forcible operation (e.g., on a frozen window) can overstress the motor and mechanism.

Notes For Mechanics And DIYers

Because the assembly includes the motor and standard 6-pin connector, replacement is straightforward for technicians familiar with door trim removal. Use careful handling of the glass and follow vehicle manufacturer procedures for safe removal and refit. After installation, check for smooth travel across the full window stroke and ensure the window seals correctly to prevent wind noise and water ingress.

Product Overview

This left rear electric window regulator with integrated motor is a direct-fit solution for Citroën C3 II (A51) vehicles. Designed for professional garages and DIY mechanics, the unit replaces the complete regulator assembly in the rear door and connects via a 6‑pin plug. Commonly searched by part numbers 9223F9 and 9802619380, it is ideal when the glass no longer moves smoothly, the motor is noisy, or the regulator cable/slider has failed.

Features And Function

• Complete Regulator Assembly With Electric Motor: Transfers motor torque into smooth vertical movement of the window glass.
• 6‑Pin Electrical Connector: Standard plug for power and control signals on the specified models.
• Direct-Fit Replacement: Supplied as a ready-to-install unit for the left rear door (driver’s side).
• Designed For Workshop And Home Repair: Robust construction intended for repeated use under normal operating conditions.

Compatibility

Fits Citroën C3 II (A51) vehicles for the Left Rear Door (driver’s side). Verify the part numbers 9223F9 or 9802619380 to confirm fitment for your specific model and trim.

Replacement Procedure

High-Level Steps For Replacement (For Experienced Technicians Or Competent DIY Mechanics):

• Disconnect The Battery Before Starting Work To Prevent Accidental Window Movement Or Electrical Damage.
• Remove Interior Door Trim And Any Vapor Barrier Carefully To Access The Regulator.
• Support The Window Glass And Loosen The Fasteners That Secure The Glass To The Regulator.
• Disconnect The 6‑Pin Electrical Connector From The Motor.
• Unbolt The Regulator Assembly From The Door Shell And Withdraw The Unit Through The Access Opening.
• Install The New Regulator, Reattach The Glass, Reconnect The Connector, And Test Window Operation Before Reassembling The Door Trim.
• Ensure Smooth Travel Across Full Stroke; Adjust Glass Alignment If Necessary.

Technical Information

• Manufacturer: Stellantis / Citroën
• Model: Citroën C3 II (A51) – Left Rear Door
• Product Codes: 9223F9, 9802619380
• Other Numbers: 6-Pin Connector

Installation Recommendations

• Disconnect The Battery Before Work And Follow Manufacturer Service Procedures To Avoid Damage.
• Check Door Wiring And Connector Pins For Corrosion Or Damage; Repair Any Faulty Wiring Before Installing The New Unit.
• Clean And Lightly Lubricate Window Channels And Slides To Reduce Motor Load And Extend Service Life.
• Test The Regulator Through Several Full Cycles Before Reassembling The Door Trim To Confirm Correct Operation And Alignment.
• Use Suitable Tools And Retain All Fasteners; Replace Any Worn Clips Or Brackets During Reassembly.

Why The Part Commonly Fails

• Motor Wear Or Electrical Faults: Frequent use, water ingress, or poor electrical connections can cause motor failure.
• Cable Or Slider Wear: Plastic sliders, guide rails, or cables can wear or break, leading to jammed or sagging windows.
• Corrosion And Dirt In Channels: Debris and rust increase friction and overload the motor.
• Accidental Damage: Door impacts or improper manual force on the glass can deform the regulator mechanism.
• Seized Guides Or Misalignment: Bent tracks or loose mounting allow excessive movement and accelerated wear.

Additional Notes

Part numbers 9223F9 and 9802619380 are commonly used when searching for this component. Fitment and connector type (6‑pin) should be confirmed visually before installation. Suitable for professional workshops and competent DIY mechanics experienced with door interior disassembly.

Overview

High-quality electric window regulator mechanism designed for the Right Rear (Passenger Side Rear Door) of the Citroën C3 II (A51). This unit includes the electric motor and a 6‑pin electrical connector, making it a complete drop-in replacement for worn or damaged regulators. Ideal for professional mechanics and experienced DIYers performing door repairs or glass replacement.

Key Features

• Complete Assembly Including Motor: Delivered as a single unit with integrated electric motor for straightforward replacement.
• 6‑Pin Connector: Standard 6PIN plug ensures correct electrical interface with the vehicle loom.
• Right Rear Application: Specifically made for the passenger-side rear door (right rear) of Citroën C3 II (A51).
• OE Cross Reference Ready: Commonly searched by product codes and OEM numbers for quick identification.

Benefits For Mechanics And DIYers

Replacing the full regulator with motor saves time compared to fitting separate motor or cable repairs. The integrated unit reduces diagnostic time in workshops and minimizes the chance of repeat failures when installed correctly. Clear fitment codes make it simple to locate the correct part by entering the product numbers in parts systems.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Citroën C3 II (A51) — Right Rear / Passenger Door
• Product Codes: 9224G3, 9802619280
• Other Numbers: 6PIN Connector

Replacement Procedure (Summary)

Suitable for competent technicians and skilled DIYers. Typical replacement steps:

• Remove Inner Door Trim: Carefully unclip door card and remove any retaining screws to access the regulator.
• Lower/Support Glass: Position the window to access mounting bolts; support the glass or remove it if required.
• Disconnect Electrical Connector: Unplug the 6‑pin connector from the motor before unbolting the regulator.
• Unbolt And Remove Old Regulator: Remove mounting bolts and slide out the old regulator assembly.
• Fit New Unit: Install new regulator, secure mounting bolts, reconnect 6‑pin connector and test operation before reassembling the door card.
• Final Checks: Verify smooth travel of the glass, check for noise, and ensure seals and clips are reinstalled.

Installation Recommendations

• Disconnect Battery: Always disconnect the battery before working on door electrics to avoid short circuits and accidental motor movement.
• Test Before Reassembly: Operate the window to confirm correct function and alignment before refitting the door trim.
• Use Proper Tools: Use trim tools to avoid breaking clips and a torque wrench where applicable for mounting hardware.
• Inspect Door Mechanisms: Check glass run channels, seals and door wiring for wear or damage and replace as needed to prevent premature failures.

Why This Part Fails (Most Common Causes)

Window regulators commonly fail due to mechanical wear and environmental factors. Typical causes include:

• Cable Fraying Or Breakage: Over time the cables and guides wear, fray or snap, causing the regulator to seize.
• Motor Wear Or Overheating: Frequent use or water ingress can lead to motor burnout or reduced torque.
• Corrosion And Moisture Ingress: Door moisture and corrosion on tracks or pivots increase friction and load on the motor.
• Broken Plastic Guides Or Clips: Plastic components can become brittle and fail, causing misalignment or jamming.
• Misalignment Or Obstructed Glass Runs: Debris or bent channels increase resistance and accelerate wear of the regulator assembly.

Durability And Maintenance

Service life depends on usage and environment. Regular maintenance—cleaning and lubricating glass channels and checking seals—extends component life. If the window shows sluggish movement, unusual noises or intermittent operation, prompt replacement prevents further damage to the motor or glass.

Search And Identification Tips

Customers often locate this part using product codes. Recommended search keywords: “Window Regulator Citroën C3 II Right Rear”, “9224G3”, “9802619280”, “Electric Window Regulator 6PIN”. These terms improve visibility in parts catalogs and search engines.

This direct-fit electric window regulator with integrated motor is designed for the right front (passenger side) door of Citroën C3 II (A51). Supplied with the motor and 6-pin connector, the unit is commonly referenced under part numbers 9222FQ and 9802617380. Ideal for professional workshops and DIY enthusiasts, this replacement restores reliable window operation and reduces diagnostic and repair time compared with repairing worn cable paths or damaged guide clips.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Citroën C3 II (A51)
• Product Codes: 9222FQ, 9802617380
• Additional Numbers: 6PIN

Function And Application

The mechanism raises and lowers the front passenger window using an electric motor that drives the regulator assembly. It converts rotary motion into linear movement to move the glass along its guides. This assembly is intended as a direct replacement for the original equipment on Citroën C3 II (A51) passenger-side front doors and is suitable for technicians and experienced DIYers searching by OEM code.

How The Part Is Replaced

• Remove the interior door trim and any retained insulation or moisture barrier to access the regulator.
• Support the glass in its current position (tape or a support tool) and detach the glass from the regulator if required.
• Disconnect the electrical connector (6-pin) and remove the fasteners securing the regulator and motor.
• Withdraw the old regulator assembly and fit the replacement unit, aligning mounting points and glass seating.
• Reconnect the motor, test window operation before reassembling the door, adjust glass alignment if necessary, and re-fit the door trim.

Installation Recommendations

• Disconnect the negative battery terminal before beginning work to prevent short circuits and accidental operation.
• Support the window glass securely when removing the regulator to avoid breakage and misalignment.
• Inspect and clean the window channels and drain holes; lubricate guide rails with appropriate grease to reduce wear.
• Check and replace any damaged plastic clips or fasteners; use correct torque on mounting bolts to avoid deformation.
• Test full travel and sealing after installation to ensure quiet, smooth operation and correct alignment.

Why The Part Most Often Fails

• Motor Wear: Commutator and brush wear in the motor over time causes slow or intermittent operation.
• Cable Or Guide Wear: Fraying cables, stretched linkages or worn plastic guides lead to binding and excessive load on the motor.
• Plastic Clip Failure: Retaining clips and sliders are subject to fatigue and can break, causing the glass to detach from the regulator.
• Water Ingress And Corrosion: Moisture entering the door can corrode components and seize moving parts.
• Mechanical Shock Or Obstruction: Forcing the window when obstructed or impact damage can bend tracks and overload the regulator.

Searchable by OEM codes 9222FQ and 9802617380, this unit provides a practical solution to restore reliable window operation on Citroën C3 II (A51) passenger-side front doors. Suitable for professional fitment or competent DIY replacement when following recommended safety and installation steps.