Product Overview

This replacement gear motor (window regulator motor) is designed for the right front (passenger side) window of the Peugeot 308 T7. It restores electric window movement when the original motor has failed or shows intermittent operation. Ideal for professional workshops and competent do-it-yourself mechanics, the unit fits vehicles using the listed part numbers and is commonly searched by its OEM codes.

Key Benefits

• Direct Fit For Peugeot 308 T7 Passenger Door – simplifies installation and reduces downtime.
• Restores Smooth And Reliable Window Operation – eliminates slow, jerky or non-moving windows caused by a failed motor.
• OEM Part Numbers Included – helps fast identification when ordering or cross-referencing.

How The Part Works

The gear motor converts electrical energy from the vehicle into rotational motion through a small gearbox, which drives the window regulator mechanism up and down. It contains an electric motor, gearbox and electrical connector. The motor engages with the regulator arms or cable drum to move the glass precisely along its tracks.

Replacement And Installation Guide

Recommended For Experienced Technicians And Confident DIYers. Typical Replacement Steps:

• Disconnect The Vehicle Battery To Avoid Short Circuits And Prevent Accidental Activation.
• Remove The Interior Door Trim Panel And Any Water Barrier Carefully To Access The Regulator Assembly.
• Support The Window Glass In The Up Position (Tape Or A Wedge) To Prevent It Falling When The Motor Is Removed.
• Disconnect The Electrical Connector And Unbolt The Motor From The Regulator.
• Replace The Motor (Or Motor/Regulator Assembly) And Reconnect The Connector; Test Operation Before Reassembling The Door Trim.
• Check For Smooth Movement, Unusual Noises, And Proper Seating Of The Glass; Refit The Door Panel Once Confirmed.

Use Appropriate Tools And Observe Safety Precautions. Avoid Forcing The Mechanism; If The Regulator Is Bent Or Severely Worn, Consider Replacing The Regulator Assembly At The Same Time.

Why This Part Fails Most Often

• Wear Of Internal Brushes Or Commutator In The Motor Causing Loss Of Torque.
• Stripped Or Worn Gears In The Gearbox Leading To Grinding Or No Movement.
• Water Ingress And Corrosion From Damaged Door Seals Or Moisture Barrier.
• Regulator Binding Or Misalignment Causing Excessive Load On The Motor.
• Electrical Issues Such As Corroded Connectors Or Intermittent Wiring Causing Failure To Receive Power.

Useful Troubleshooting Tips

• Verify Power And Ground To The Motor With A Multimeter Before Removal.
• Listen For Motor Noise While Operating The Switch — A Spinning Sound With No Movement Indicates Mechanical Disengagement Or Stripped Gears.
• Inspect The Regulator Tracks And Cables For Damage; Replace Both Components If Heavily Worn.
• Check Associated Fuses And Window Switch Function If The Motor Is Silent.

Technical Information

• Manufacturer: Stellantis (Peugeot / Citroën Group)
• Model: Peugeot 308 T7
• Product Codes: 9675467380, 0130822743
• Other Numbers: 130822743

Recommendation For Installation

Perform Installation In A Clean, Dry Workspace. Support The Window Glass During Removal And Reassembly. Test The New Motor’s Operation And Full Travel Before Refitting The Door Trim. Use Dielectric Grease On Electrical Connectors If Corrosion Is Present And Lubricate Sliding Tracks With Suitable Grease To Reduce Future Wear.

Why Replace The Motor Rather Than Repair

Many failures are internal (worn brushes, damaged gear teeth) or caused by contamination. Replacing The Motor Restores Reliable Operation Faster Than Attempting Complex Internal Repairs And Reduces Vehicle Downtime.

Compatibility Notes

Search By OEM Part Numbers 9675467380 Or 0130822743 For Fast Identification. Ensure The Part Number Matches The Vehicle’s Existing Unit And Door Position (Right Front / Passenger Side).

Product Overview

High-quality electric window motor manufactured by BOSCH, designed to operate the right rear window on Peugeot 308 (T7) models. This motor drives the window regulator assembly to raise and lower the glass smoothly. It is a direct-fit replacement for worn or failed OE units and is commonly identified by manufacturer part numbers listed below.

Key Benefits

• Direct Fit For Peugeot 308 (T7) Right Rear Door (Passenger Side)
• Original Equipment Manufacturer (BOSCH) Component Technology
• Restores Smooth And Reliable Window Operation
• Compatible With Common OE Part Numbers For Easier Identification

How The Part Works

The electric window motor couples with the window regulator (gear or scissor mechanism) to convert electrical energy into rotational motion, which is transmitted to the regulator and moves the window glass up or down. The motor contains an electric rotor, brushes (in brushed motors), and a reduction gearset to provide the required torque for lifting the glass.

How To Replace

Replacement can be performed by experienced DIYers or professional mechanics. Typical replacement steps:

• Remove Interior Door Trim And Any Moisture Barriers To Access The Regulator And Motor.
• Disconnect The Battery Before Handling Electrical Connectors.
• Unplug The Motor Electrical Connector And Remove Mounting Bolts.
• Support The Window Glass If Necessary And Release The Motor From The Regulator.
• Install The New Motor Onto The Regulator, Secure Bolts, Reconnect Electrical Connector, And Test Operation Before Reassembling The Door.
• Reassemble Door Trim And Verify Window Function Through Full Travel.

Technical Information

• Manufacturer: BOSCH
• Model: Peugeot 308 (T7) – Right Rear (Passenger Side)
• Product Codes: 9675466380
• Other Numbers: 0130822744

Installation Recommendations

When Installing A Replacement Window Motor, Follow These Recommendations To Ensure Long Service Life:

• Disconnect The Battery Before Beginning Work To Avoid Short Circuits.
• Inspect The Regulator Mechanism For Worn Gears, Frayed Cables, Or Bent Tracks And Replace If Necessary; Motor Replacement Alone May Not Resolve Issues Caused By A Faulty Regulator.
• Clean And Lightly Lubricate Sliding Tracks And Guide Channels With Appropriate Grease To Reduce Load On The Motor.
• Ensure Electrical Connectors Are Clean, Dry, And Fully Seated; Repair Any Corroded Wiring Or Terminals.
• Test Full Window Travel And Auto-Function After Installation To Confirm Proper Operation.

Why The Part Most Commonly Fails

• Wear Of Internal Brushes Or Commutator (In Brushed Motors) Leading To Loss Of Power Or Intermittent Operation.
• Gear Or Worm Drive Wear And Tooth Stripping Due To High Load Or Lack Of Lubrication.
• Water Ingress Into The Door Causing Corrosion Or Electrical Shorting.
• Regulator Cable Breakage Or Track Binding Which Overloads The Motor.
• Frequent Use And Environmental Factors (Dirt, Moisture, Salt) Reducing Lifespan.

Fitment And Compatibility

Designed For Peugeot 308 (T7) Right Rear Door (Passenger Side). Often Searched By Part Numbers 9675466380 Or 0130822744. Always Verify That The Physical Mounting And Electrical Connector Match Your Vehicle Before Installation.

Notes For Professionals

Mechanics And Experienced DIYers Will Appreciate That Replacing The Motor Often Requires Inspection Of The Entire Regulator Assembly. If The Regulator Shows Excess Play Or Damaged Components, Replace The Regulator Assembly Or Repair The Affected Parts To Prevent Premature Motor Failure.

Additional Information

This Motor Is Supplied As An Electric Replacement Part For Restoration Of Window Functionality. Typical Lifespan Depends On Usage Patterns And Environmental Exposure; Routine Inspection And Maintenance Of Door Mechanisms Extends Service Life.

Overview

Electric window regulator mechanism designed for the left rear (driver-side rear) door of the Peugeot 308 T7. This direct-fit unit replaces a worn or damaged regulator assembly and restores smooth, reliable window travel. Commonly searched by part numbers 9675463180, 9675463180-00 and internal code 9223C9 — ideal for mechanics and DIY enthusiasts who look up parts by OE reference.

Key Features

• Direct replacement for OE-style rear left window regulator on Peugeot 308 T7.
• Complete mechanism ready to install — includes regulator assembly and motor (as supplied).
• Designed to restore correct window alignment, smooth movement and secure sealing.
• Typical faults it remedies: window slipping, noisy or jerky travel, window stuck or falling into door.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Peugeot 308 (T7) — Left Rear (Driver-Side Rear Door)
• Product Codes: 9675463180, 9675463180-00
• Other Numbers: 9223C9

Function And Symptoms Of Failure

The window regulator transfers motor rotation into vertical movement of the glass. When failing, typical symptoms include slow or intermittent operation, grinding or clicking noises, window that stalls or drops, and complete loss of movement. Failures usually originate from motor wear, frayed cables, broken plastic sliders or corroded/mechanically damaged tracks.

Why This Part Fails

• Mechanical wear: plastic guides and sliders degrade over years of use.
• Cable fatigue or breakage: cables can fray or snap under load.
• Water ingress and corrosion: moisture in the door accelerates corrosion of metal parts and electrical connectors.
• Motor wear: electric motor brushes and commutator wear out after prolonged cycles.
• Accidental damage: impact to the door or window can bend tracks or damage mounting points.

Replacement Procedure (Summary)

Recommended for professional fitters and experienced DIY mechanics. Typical steps:

1. Disconnect the vehicle battery before starting to avoid short circuits and unintended motor activation.
2. Remove interior door trim and vapor barrier carefully, retaining clips and fasteners.
3. Lower or support the glass and detach from the regulator (note bolt positions for correct reassembly).
4. Unplug electrical connector(s) to the motor and remove regulator mounting bolts.
5. Install the new regulator in reverse order: fasten regulator, reconnect motor plug, remount glass to regulator and check alignment.
6. Reconnect battery and test full travel and switch operation before refitting door trim. Adjust glass alignment if necessary to ensure proper sealing and smooth movement.

Installation Recommendations

• Always disconnect the battery prior to removal/installation to prevent electrical damage.
• Use suitable trim tools to avoid breaking door clips and plastic panels.
• Support the glass during work to prevent it from dropping and shattering.
• Inspect door wiring, connectors and fuses while the door is open — replace any corroded connectors or worn wiring.
• Lubricate guides and contact points with suitable product (silicone spray or light grease) to prolong service life.
• After fitting, cycle the window several times to confirm smooth operation and check for unusual noises.

Compatibility And Notes

Fits Peugeot 308 T7 left rear (driver-side rear door). Searchable by OE numbers 9675463180, 9675463180-00 and code 9223C9. When sourcing parts, customers and workshops commonly use these references to locate the correct unit quickly.

Why Buy This Unit

Replacing a faulty regulator with a correct-fit mechanism restores proper function, reduces noise and prevents damage to the door glass and sealing. This unit is suitable for professional repairs and DIY maintenance where OE-equivalent references are required for compatibility.

This high-quality replacement window regulator is designed for the right rear (passenger-side) door of the Peugeot 308 T7. It restores reliable up-and-down movement of the window glass and is identified by common OE codes used by Stellantis/Peugeot. Ideal for professional mechanics and experienced DIY technicians looking for a direct-fit solution that matches factory mounting points and electrical connectors.

Technical Information

• Manufacturer: Stellantis / Peugeot
• Model: Peugeot 308 (T7) — Right Rear Door (Passenger Side)
• Product Codes: 9675462980, 9675462980-00, 9224E2
• Other Numbers: 9224.E2, 922400

Function

The window regulator mechanism guides and supports the glass while converting motor rotation into smooth linear movement. It keeps the window sealed and stable in any travel position and works together with the electric motor, regulator tracks or cable system, and door mounting points to provide quiet and reliable operation.

Common Failure Causes

• Wear of plastic sliders or guides causing binding and uneven movement.
• Cable fraying or snapping in cable-driven regulators.
• Corrosion or water ingress that seizes moving parts or motor.
• Broken mounting points or bent tracks from impact or forced operation.
• Electric motor wear resulting in slow, noisy, or intermittent operation.

Symptoms That Indicate Replacement Is Needed

• Window moves slowly, jerks, or gets stuck during travel.
• Unusual grinding, clicking, or whining noises from inside the door.
• Window drops down or will not stay in position.
• Complete failure to move the window despite power at the switch.

Installation Recommendations

Replacement can be performed by a competent technician or an experienced DIYer with basic automotive tools. Follow these general steps and always refer to vehicle service information where available:

• Disconnect the vehicle battery before starting work to avoid accidental operation and short circuits.
• Remove the interior door trim and any clips, and carefully peel back the vapor/water barrier.
• Support the window glass (tape or suction support) and, if necessary, partially lower it to access mounting bolts.
• Disconnect the electrical connector for the window motor and unbolt the regulator and motor assembly from the door and glass.
• Remove the old regulator, transfer any reusable parts if required, and fit the new regulator in the reverse order.
• Align the glass, secure mounting points, reconnect the motor and battery, then test the window operation through full travel before reassembling the door trim.
• Ensure clips and seals are refitted correctly to maintain door sealing and NVH performance.

Why This Part Fails Most Often

Window regulators are subject to continuous mechanical stress and environmental exposure. Plastic sliders and cable systems wear over time, and moisture ingress accelerates corrosion and motor degradation. Frequent stop-start use, forcing the window when jammed, or water accumulation inside the door are common causes of premature failure.

Notes

Supplied OE numbers: 9675462980 / 9675462980-00 / 9224E2. Confirm fitment by comparing these codes with the existing part numbers listed on the vehicle part. Installation requires careful handling of the glass and electrical connector; when in doubt, have the replacement carried out by a professional workshop.

This high-quality BOSCH electric window motor is designed for the left rear (driver-side rear) door of the Peugeot 308 T7. The unit replaces the original motor and restores reliable up-and-down movement of the window regulator. Ideal for professional garages and experienced DIY mechanics, this part is often searched by its product codes (9675466480 / 0130822745), so it is a practical replacement when the window operation becomes slow, noisy or stops completely.

Key Benefits

• Direct Fit For Peugeot 308 T7 Left Rear Door — Ensures Correct Mounting Geometry And Smooth Operation.
• BOSCH Build Quality — Robust Electric Motor Designed For Automotive Window Regulators.
• Quick Replacement By Trained Technicians Or Experienced DIY Enthusiasts — Restores Window Function Quickly.
• Commonly Searched By Part Number (9675466480 / 0130822745) — Easier To Find And Match.

Technical Information

• Manufacturer: Bosch
• Model: Peugeot 308 (T7) – Left Rear Door
• Product Codes: 9675466480, 0130822745
• Other Numbers: Stellantis / CITROËN / PEUGEOT References

Function And Common Faults

The window motor drives the regulator mechanism that raises and lowers the glass. Typical failure modes include worn brushes or commutator, water ingress and corrosion, stripped or broken internal gears, seized regulator bearings, and connector/wiring faults. Symptoms Before Replacement Usually Include Slow Movement, Intermittent Operation, Grinding Or Clicking Noises, And Complete Loss Of Movement.

Replacement Procedure (Overview)

Replacement Should Be Performed By A Trained Mechanic Or An Experienced DIYer:

• Disconnect The Battery Before Starting Work To Avoid Short Circuits And Unwanted System Activation.
• Remove The Inner Door Trim Carefully To Access The Regulator And Motor. Keep Clips And Fasteners Safe.
• Peel Back The Moisture Barrier To Expose The Regulator Assembly.
• Disconnect The Electrical Connector From The Window Motor.
• Unbolt The Motor From The Regulator (Typically 3–4 Fasteners) And Remove The Motor Gear From The Regulator Spline.
• Fit The Replacement Motor In Reverse Order, Ensure Proper Engagement With The Regulator, And Secure Bolts To Correct Tightening Values.
• Reconnect The Battery And Test Window Operation Several Times Before Reassembling The Door Trim. Check For Smooth Travel And Proper Alignment.
• Reassemble The Moisture Barrier And Door Trim, Replacing Any Damaged Clips Or Fasteners As Needed.

Installation Recommendations

• Test The New Motor And Window Movement Before Final Reassembly To Confirm Correct Operation.
• Inspect The Regulator Mechanism For Excessive Play Or Corrosion; Replace The Regulator If Heavily Worn.
• Use Dielectric Grease On Electrical Connectors If Corrosion Is Present On Pins.
• Lubricate Regulator Tracks With A Suitable White Lithium Or Silicone-Based Grease To Reduce Wear.
• Replace Any Broken Clips Or Fasteners To Prevent Rattles And Water Ingress.

Why This Part Fails Most Often

Failure Is Usually Caused By A Combination Of Mechanical Wear And Environmental Factors. Water Ingress Through The Door Seals Leads To Corrosion Of The Motor Internals And Regulator Gears. Frequent Use, Heavy Loads (Iced Or Stuck Windows), And Aged Carbon Brushes Also Reduce Motor Life. Poor Electrical Connections Or Damaged Wiring Can Cause Intermittent Operation Or Complete Failure.

Notes For Buyers

Search By Product Code For Fast Matching (9675466480, 0130822745). The Unit Is Supplied As A Direct Replacement For The Left Rear Door Application On Peugeot 308 T7 Models. Verify Fitment By Checking The Part Numbers Listed On Your Existing Motor And The Vehicle Repair Manual Before Installation.

Description

High-quality electric window regulator mechanism designed for the left front (driver’s) door of the Peugeot 308 (T7). This replacement part restores smooth and reliable operation of the power window, reducing noise, preventing window misalignment and eliminating intermittent movement caused by worn components. Ideal for professional workshops and experienced DIY technicians who require a direct-fit, durable solution that matches original equipment specifications.

Key Benefits

• Direct Fit For The Left Front Door: Designed to fit mounting points and electrical connections for Peugeot 308 T7 driver side doors.
• Restores Smooth Operation: Eliminates jerky or slow window travel caused by stretched cables or worn guides.
• Durable Components: Reinforced fittings and corrosion-resistant materials extend service life under normal operating conditions.
• Part Numbers For Easy Identification: Commonly searched by OEM codes to speed up ordering and part matching.

How To Replace

Replacement should be performed by a trained technician or a knowledgeable DIYer with basic automotive electrical and trim experience. Typical replacement steps:

• Disconnect the vehicle battery before starting work to avoid short circuits and prevent accidental motor operation.
• Remove the interior door trim and any moisture barriers carefully to access the regulator and motor assembly.
• Disconnect the electrical connector for the window motor and unbolt the regulator assembly from the door shell.
• Lower the window glass to access mounting points, support or safely secure the glass, then remove the old regulator.
• Install the new regulator, secure all fasteners to manufacturer torque where specified, reconnect the motor connector and test window operation before reassembling the door trim.
• Reinstall the moisture barrier and door trim, reconnect the battery and verify correct travel, sealing and switch function.

Installation Recommendations

Always follow manufacturer service instructions when available. Recommended precautions:

• Disconnect The Battery Before Any Electrical Work Or Removing The Regulator.
• Handle The Window Glass Carefully And Support It During Regulator Removal/Installation.
• Check Door Drain Holes And Moisture Barrier Condition To Prevent Future Corrosion.
• Lubricate Sliding Tracks And Pivot Points With Suitable Grease To Reduce Wear And Noise.
• After Installation, Cycle The Window Several Times To Ensure Smooth Operation And Proper Alignment.

Why This Part Commonly Fails

Power window regulators fail for several common reasons: cable wear or fraying, plastic guide and pulley degradation, motor wear or overheating, water ingress and corrosion inside the door, and strain from misaligned window glass. Regular exposure to moisture and dirt accelerates wear of moving parts. Symptoms include slow or jerky window movement, grinding noises, the window falling into the door, or complete loss of function.

Technical Information

• Manufacturer: Stellantis (Peugeot)
• Model: Peugeot 308 (T7) – Left Front / Driver’s Door
• Product Codes: 9658927080, 9675466180
• Other Numbers: 9221CW, 9221.CW

Notes For Professionals

This part is commonly referenced by the listed OEM numbers in repair orders and parts searches — include those codes when ordering or recording the replacement. Fitment must match the left front (driver) door configuration of the Peugeot 308 T7.

Compatibility And Search Tips

When searching for the part, use keywords such as “Peugeot 308 window regulator left front”, “power window mechanism 9658927080” or the alternative code 9675466180 / 9221CW to find matching listings quickly. Suitable for workshops and experienced DIY technicians who perform door trim removal and electrical reconnection correctly.

The right front window regulator for Peugeot 308 is a direct-fit replacement part designed for mechanics and DIY enthusiasts who demand reliability and correct fitment. This mechanism controls smooth raising and lowering of the passenger-side front window and is often searched by part numbers 9658926980, 9675466080 and 9222CV. Built to interface with the factory door hardware, it restores proper window movement, reduces wind noise and prevents glass misalignment.

Technical Information

• Manufacturer: Stellantis / Peugeot
• Model: Peugeot 308 First Series (Right Front)
• Product Codes: 9658926980, 9675466080, 9222CV
• Additional Numbers: 9222.CV, 9222CV/9222.CV, 9658926980

Function And Typical Symptoms

The regulator assembly guides and supports the door glass and transmits motion from the electric motor (if fitted) to lift or lower the window. Typical failure symptoms include slow or jerky window travel, window dropping down inside the door, unusual noises (grinding or clicking), or complete lack of movement if the motor is defective. In many cases the mechanical regulator fails before the motor, but both items should be checked when diagnosing the fault.

Why This Part Fails

• Wear Of Plastic Components Or Guides: Repeated use causes plastic sliders and guides to wear or fracture, leading to misalignment.
• Cable Fraying Or Detachment: Cable-driven regulators can suffer from cable stretch or breakage, causing loss of control.
• Corrosion And Water Ingress: Moisture inside the door accelerates corrosion on metal parts and can jam moving elements.
• Motor Wear (If Fitted): Electric motors may lose torque over time or seize, especially if bearings degrade.
• Impact Or Door Damage: Door impacts can deform mounting points or bend tracks, compromising regulator operation.

Replacement Procedure (Overview)

Useful For: Experienced DIYers And Professional Technicians. Typical tools required include a trim removal tool, Torx and Philips screwdrivers, socket set, pliers and a small pry tool.

1. Prepare The Vehicle: Park on a level surface and isolate the electrical system by disconnecting the battery to avoid short circuits while working on the door electrics.
2. Remove Door Trim: Carefully remove door card clips and fasteners to access the inner door panel. Keep all fasteners organized.
3. Detach Electrical Connectors: Disconnect the window switch, speaker and any door harness connectors to free the trim panel.
4. Support The Glass: Before removing the regulator, support the glass (tape or a wedge) to prevent it from falling when the regulator is detached.
5. Remove Motor (If Fitted) And Bolts: Unbolt the motor and regulator assembly from the door inner panel. If motor is being reused, note gear alignment.
6. Install New Regulator: Position the new regulator, loosely fit bolts, then align the glass and tighten fasteners to specification.
7. Reconnect And Test: Reconnect motor and switches, briefly reconnect the battery and test window travel through full stroke to confirm smooth operation before final reassembly.
8. Reassemble Door Trim: Once operation is confirmed, re-fit the door card, connectors and all trim pieces.

Note: The Motor Can Be Purchased Separately If Only The Motor Is Faulty.

Installation Recommendations

• Check All Mounting Points And Clips: Replace any damaged clips or fasteners to ensure a firm fit and prevent rattle.
• Lubricate Moving Parts: Use suitable door-track grease on guides and sliders to prolong service life and reduce noise.
• Align Glass Carefully: Improper alignment can cause binding and premature wear. Adjust until the window runs freely without rubbing the seals.
• Test Before Full Reassembly: Verify smooth operation and correct travel limits before fitting the door card to avoid repeating the job.
• Consider Replacing Worn Related Parts: If the motor shows signs of wear, replace it at the same time to avoid future removal of the new regulator.

Who Should Fit This Part

This window regulator is suitable for skilled DIYers who are familiar with door trim removal and electrical connectors, as well as professional auto technicians. If you are unsure about tools or procedures, have the replacement carried out by a garage to ensure correct alignment and safe reassembly.

Common Search Terms: Peugeot 308 window regulator, right front window regulator Peugeot 308, 9658926980, 9675466080, 9222CV.

This motor gearbox drives the left front window regulator on Peugeot 308 (T7) driver’s doors. Ideal for professional workshops and experienced DIY mechanics, this unit is referenced under several OE numbers (9657247680, 9675467480, 0130822742, 9221CX) and is commonly searched by part number when replacing a faulty window motor. Robust and compact, the assembly restores smooth, reliable up-and-down operation of the driver’s window and eliminates slow, noisy or stuck windows caused by a worn motor or gearset.

Technical Information

• Manufacturer: Stellantis (Citroën/Peugeot)
• Model: Peugeot 308 (T7) — Left Front Driver’S Door
• Product Codes: 9657247680, 9675467480, 0130822742
• Other Numbers: 9221CX, 9221.CX, 130822368

Function And Typical Symptoms

The unit is an electric motor with an integrated gear reduction that powers the window regulator mechanism. Its function is to convert electrical input from the window switch into rotational torque to move the glass smoothly along the guide tracks. Common symptoms of a failing motor include:

• Intermittent or no movement from the driver’s window switch.
• Slow or labored window travel compared with other doors.
• Grinding, clicking, or whining noises from inside the door when operating the window.
• Window becomes stuck in one position or falls down due to regulator slipping.

Most Common Causes Of Failure

• Wear Of Internal Brushes Or Commutator: Progressive loss of electrical contact reduces torque and causes intermittent operation.
• Gear Wear Or Stripped Teeth: Mechanical wear in the plastic/metal gearset leads to slipping or grinding.
• Water Ingress And Corrosion: Moisture entering the door cavity can corrode electrical connections and motor internals.
• Regulator Binding Or Misalignment: Excessive load from a damaged regulator or seized window guides overloads the motor.
• Electrical Issues: Corroded connectors, broken wires, or faulty switches can mimic motor failure.

Installation Recommendations

Recommended For Experienced Mechanics And Confident DIYers. Typical Replacement Steps:

1. Disconnect The Battery Before Starting To Prevent Short Circuits And Avoid Damaging The Electrical System.
2. Remove The Door Trim Panel And Vapor Barrier Carefully To Access The Regulator Assembly.
3. Lower The Window To A Position Where The Glass Can Be Secured, Then Unbolt The Glass From The Regulator And Support It Safely.
4. Unplug The Electrical Connector From The Motor, Unbolt The Motor From The Regulator, And Remove The Unit.
5. Fit The Replacement Motor, Reconnect The Electrical Plug, Reattach The Glass, And Test Window Function Before Reassembling The Door Panel.
6. Check For Smooth Operation Through Full Travel; Adjust Regulator Alignment If Necessary.

No Programming Is Typically Required: In most cases This Motor-Regear Is Plug-And-Play. However, Always Follow The Vehicle Manufacturer’S Procedure And Re-Test All Window Functions After Installation.

Why Professional Fitment Can Be Beneficial

Correct Diagnosis Is Crucial: Symptoms Can Be Caused By Regulator Mechanism, Electrical Faults, Or The Motor Itself. Professional Workshops Will Ensure The Regulator Slides And Guides Are In Good Condition And Replace Or Lubricate Them If Needed, Preventing Premature Failure Of The New Motor.

Notes For Buyers

• This Unit Is Intended For Peugeot 308 (T7) Left Front Driver’S Door Applications; Verify Part Numbers 9657247680 / 9675467480 / 0130822742 / 9221CX When Searching.
• Suitable For Mechanics And Skilled DIYers Familiar With Door Trim Removal And Window Safety Procedures.

Commonly associated with part number 9657247580, this motor replaces worn-out or malfunctioning units, which are known to fail over time due to factors like wear and tear, electrical issues, or mechanical failure. Regular inspections can help identify potential failures before they affect window operation.

Replacing the window regulator motor is a straightforward process that requires basic mechanical skills. It’s advisable to consult your vehicle’s manual for specific instructions regarding the replacement procedure.

Technical Information

• Manufacturer: Bosch
• Model: Peugeot 308
• Product Codes: 9657247580, 0130822369, 9222CW
• Other Numbers: 130822369