The Citroën Peugeot 6554W4 window control is an electric switch for controlling the lowering and raising of windows on selected Citroën and Peugeot models. It is a used original part, suitable as a replacement for a damaged or non-functioning controller, when there is, for example, intermittent operation or a complete loss of the window’s response to pressing a button.

Manufacturer:
PSA – Citroën / Peugeot (OEM part)

Model:
Citroën Xsara
Citroën Xsara Picasso
Citroën Xantia
Citroën Berlingo I, II
Peugeot Partner I, II
(depending on equipment and specific car version)

Product codes:
6554W4
6552Z7

Other numbers:
It can also be listed under other PSA internal or production numbers, or under other number combinations on the controller label – it is important that the designation 6554W4 or 6552Z7 matches the original part from the car.

This window control is mounted in the door (usually on the driver’s side) and is used to electrically operate one or more side windows. Thanks to the original design, it fits into the original door panel without modifications and the connector is designed for direct connection to the original wiring. A used original part often offers better longevity and reliability than cheap universal replacements.

Installation recommendations:
– Before removing the old controller, always disconnect the battery (minus pole) to avoid short circuits in the car’s electrical network.
– Carry out the disassembly carefully, ideally with plastic pry bars, so as not to damage the door lining and the controller frame.
– Check the condition of the connector and wires – they must not be oxidized, broken or loose; clean any light oxidation with a suitable contact preparation.
– Before finally snapping the controller into the door panel, we recommend briefly testing the function – control of all windows, backlighting (if available) and correct response to individual button positions.
– After installation, check that the controller is firmly seated in the panel and does not move, so as not to stress the connector during use.
– In some models, after disconnecting the battery, it may be necessary to make a simple adaptation of the end positions of the window (e.g. fully retracting and extending the window by pressing the button for a few seconds in the upper position).

The window switch is essential for operating the electric windows of vehicles, playing a crucial role in driver and passenger comfort and safety. Over time, normal wear or faults may necessitate its replacement, especially in older models. Installing this window switch can enhance the responsiveness and reliability of your windows, preventing potential issues during operation.

Technical Information

Manufacturer: Citroën, Peugeot
Model: Citroën Xsara, Xsara Picasso, Xantia, Berlingo, Peugeot Partner
Product Codes: 6552Z7, 6554W4
Other Numbers: Not specified
This window switch is compatible with a range of Citroën and Peugeot models, ensuring versatile application across various vehicles in these brands.

Purchase this window switch from a trusted supplier to make sure your vehicle’s electric windows operate smoothly again. Besides being a cost-effective choice, using this part also supports environmental sustainability by reducing waste.

For ordering or additional information, feel free to contact our customer service team, ready to assist you in selecting the correct part for your vehicle. With this switch installed, your car windows will operate flawlessly once again.

Often, window switches can fail due to wear and tear from prolonged usage, exposure to moisture, or electrical issues. A malfunctioning switch can lead to windows getting stuck or not responding at all, causing inconvenience to drivers and passengers. Regular inspections and timely replacements can ensure that your vehicle’s window functions smoothly.

Replacing the window control switch is straightforward and can be done by most DIY enthusiasts or professional mechanics. It typically requires minimal tools and can be completed in under an hour, helping you restore the comfort and functionality of your vehicle with ease.

Technical Information

• Manufacturer: Citroën Peugeot
• Model: Xsara, Berlingo, Partner
• Product Codes: 6552NW
• Additional Numbers: Not Applicable

The Window Switch with OEM code 6552KT is a used original PSA part designed for Citroën and Peugeot vehicles. It is commonly fitted to Citroën Xsara, Berlingo I/II and Peugeot Partner I/II models. This unit replaces faulty electric window control switches without modifications when the part code and connector match the original.

Fitment And Function

This electric window switch operates the up/down movement of the door glass. Typical symptoms of a failing switch include no response, operation only in one direction, intermittent behaviour or a sticking button. On these models failures are frequently caused by worn internal contacts and moisture ingress inside the door.

Installation

Installation is straightforward for professional mechanics and competent DIYers: switch off the ignition (or disconnect the battery for extra safety), pry out the switch bezel from the door trim, unplug the electrical connector, fit the replacement switch and snap the bezel back into place. Some variants may require partial removal of the door card. After fitting, test both directions of window travel to confirm correct operation.

Why Replace

Replacing a defective switch restores reliable window control, preserves the original interior appearance and is usually more cost-effective than replacing larger door modules. Always compare the OEM code 6552KT (or 6552.KT), the number of buttons, the switch housing shape and the connector type with the original unit before ordering to ensure compatibility.

Technical Information

• Manufacturer: PSA (Citroën / Peugeot)
• Model: Citroën Berlingo I (M49), Citroën Berlingo II (M59), Peugeot Partner I (M49), Peugeot Partner II (M59), Citroën Xsara
• Product Codes: 6552KT, 6552.KT
• Other Numbers: OEM PSA 6552.KT (alternate notation)

Suitable for mechanics and home repair enthusiasts. Compare part number and connector shape with your original switch before purchase to ensure proper fitment.