This power window switch, marked with part numbers 96360166XT and 6554E8, is a direct-fit replacement option for many Peugeot 307 and Peugeot 407 door applications. Designed for technicians and DIY enthusiasts, the switch restores reliable window control when the original unit fails. It is commonly used in front door assemblies and integrates with the standard 12V vehicle electrical system found on Stellantis-built Peugeot and Citroën models.

Technical Information

• Manufacturer: Stellantis / Peugeot / Citroën
• Model: Peugeot 307, Peugeot 407
• Product Codes: 96360166XT, 6554E8
• Additional Numbers: 655400000000

How To Replace

Replacement is straightforward for a competent automechanic or an experienced DIYer. Basic steps:

• Disconnect the negative battery terminal to avoid short circuits and accidental window operation.
• Remove the interior door trim or switch bezel (clips and screws vary by model).
• Release the switch module from the door panel and unplug the electrical connector.
• Install the new switch by connecting the harness, seating the module, and refitting the bezel and trim.
• Reconnect the battery and test all window functions before final reassembly.

Installation Recommendations

• Use plastic trim tools to avoid damaging the door panel or clips.
• Check connector pins for corrosion or bent terminals; clean contacts if necessary.
• Apply a small amount of dielectric grease to terminals to reduce future corrosion in humid environments.
• Test the switch operation through full travel after installation and before fully refitting trim.

Common Failure Causes

Power window switches typically fail due to wear on internal contacts, moisture ingress, or mechanical damage to the buttons and housing. Frequent use, spilled liquids, or dirt and contamination in the door environment accelerate contact erosion and intermittent operation. In some cases, related wiring issues or faulty window motors can be mistaken for a bad switch, so verify system function during diagnosis.

Expected Lifetime And Symptoms

Lifetime depends on usage and exposure—many switches remain functional for several years, but heavy daily use or exposure to moisture can cause failure in a shorter time. Typical symptoms indicating replacement is needed include intermittent window movement, only one or two positions responding, sticky or loose buttons, and audible arcing or burning smell from the switch area.

Searchable By Part Number: 96360166XT, 6554E8 — customers often locate this part using these codes for Peugeot 307 and 407 models.

This sunroof blind controller is a direct-fit interior switch for Peugeot 407 and Citroën C3 models. Designed for workshop use and competent DIYers, the unit allows smooth operation of the sliding sunshade (interior blind) and is commonly searched by its part numbers 96413719BJ and 6554Q3. The compact design matches the original trim appearance and the Color FBJ – LAMA corresponds to the vehicle interior trim code.

Technical Information

• Manufacturer: Stellantis / Citroën / Peugeot
• Model: Peugeot 407, Citroën C3
• Product Codes: 96413719BJ, 6554Q3
• Other Numbers: NFP, Color Code FBJ – LAMA

Function And Application

The controller operates the electric sunroof blind (interior sunshade) by sending the command to the blind motor or mechanism. It is mounted in the roof console or overhead trim and integrates with the vehicle’s interior electrical system. Use this part when the sunshade does not move, moves intermittently, or when the control switch has worn contacts or broken actuator buttons.

How To Replace

Suitable for experienced mechanics and able DIYers. General replacement steps:

• Disconnect the negative battery terminal before starting to avoid short circuits.
• Carefully remove the overhead console or headliner trim surrounding the switch using plastic trim tools to avoid damage to clips and upholstery.
• Unscrew the switch module fasteners and unplug the electrical connector(s).
• Fit the new controller, connect the wiring harness, and secure fasteners. Reinstall trim and reconnect the battery.
• Test full range of sunshade travel and switch functions after installation.

Installation Recommendations

• Work On A Cool Interior: Sunroof trim and plastic clips are easier to handle at moderate temperatures.
• Use Trim Tools: Protect the headliner and decorative trim with plastic pry tools to avoid cracking or scuffing.
• Check Connector Pins: Inspect connectors for corrosion or bent pins before fitting the new unit.
• Reset Procedures: After installation, operate the blind through full travel to ensure correct indexing; consult vehicle service manual for any calibration steps if needed.

Why This Part Commonly Fails

Most frequent causes of failure include worn internal switch contacts from repeated use, ingress of dust or moisture into the overhead console, brittle plastic actuator parts or housing that crack with age, and intermittent electrical connection due to connector corrosion. Excessive force or misuse when operating the blind can also accelerate wear. Address the root cause (for example, moisture ingress) to avoid repeated failures.

If you’re seeking an easy solution to non-responsive or faulty power windows in your Peugeot 407, this switch offers a straightforward replacement option. Its tailored design ensures compatibility and quick installation, allowing both professional mechanics and DIY enthusiasts to perform repairs without hassle. Replacing your damaged or unresponsive switch with this part helps save time and repair costs while maintaining original functionality.

Technical Information:
Manufacturer: PSA CITROEN PEUGEOT
Model: Peugeot 407
Product Codes: 96468705XT, 6554ES
Additional Numbers: None specified

This component delivers real value for its price point by ensuring your Peugeot 407’s window controls operate as intended. Whether you are experienced in automotive repairs or handling them yourself, the absence of the mirror folding function simplifies installation and guarantees compatibility. Choose this tested used switch to get your Peugeot 407 back on the road with fully functioning windows.

This power window and mirror folding switch is a direct-fit replacement for Peugeot 407 drivers looking for a reliable control module. Designed to operate window motors and the mirror folding function from the door panel, the switch is a common replacement part for workshop and DIY repairs. Listing the OEM reference numbers in the product title and description increases findability in searches—enter the part numbers 96468704XT or 6554ER when searching for compatibility.

Function And Fitment

The unit controls front and/or rear electric windows depending on vehicle wiring and also integrates the mirror folding command. It is compatible with Peugeot 407 models equipped with electric windows and folding mirrors. The module fits into the door trim panel on the driver’s side and connects to the vehicle wiring harness via a multi-pin connector.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Peugeot 407
• Product Codes: 96468704XT
• Additional Numbers: 6554ER, NFP

Installation Recommendations

Before starting, disconnect the negative battery terminal to avoid short circuits and accidental motor operation. Typical replacement steps:

• Remove the door trim screws and use a plastic trim tool to unclip the panel carefully to avoid breaking retaining clips.
• Peel back the door card enough to access the switch assembly and wiring connector.
• Release the electrical connector and unfasten any screws or clips holding the switch module in place.
• Swap the used switch with the replacement, reconnect the wiring and test all window and mirror-folding functions while the door trim is still loose.
• Reassemble the door card and tighten all fasteners, then reconnect the battery and perform a final function check.

Recommended tools: flat and Phillips screwdrivers, Torx set (if applicable), socket set, plastic trim tools, and a multimeter for verifying power and ground if troubleshooting is required.

Most Common Failure Reasons

• Wear of internal contacts and microswitches from frequent use, causing intermittent or complete loss of function.
• Corrosion or dirt ingress into the connector or switch housing, often due to moisture entering the door cavity.
• Mechanical damage to the switch housing or mounting clips from forceful operation or improper removal.
• Faulty wiring or poor connector contact resulting in intermittent operation; sometimes traced to broken strands in the door flex region.

Practical Tips

Because this is a used part, inspect the plastic housing, mounting tabs and electrical connector for damage before installation. Test every window position and the mirror folding function immediately after connection and before final reassembly. If symptoms persist after swapping the switch, check fuses, grounding points and window motor condition to isolate the fault.

Suitable For Mechanics And DIYers: The unit is straightforward to replace with basic workshop tools, but care during door trim removal and connector handling will prevent additional repairs. Keeping the original part numbers handy (96468704XT, 6554ER) helps ensure you find matching replacements or cross-references quickly.