This instrument cluster is intended for mechanics and experienced DIY enthusiasts who maintain or repair first‑generation Peugeot 3008 and 5008 vehicles. The unit displays vehicle speed, odometer, trip, and warning indicators and is often searched by the product codes listed below. Supplied as a complete instrument cluster with visible mileage of approximately 98,000 km — a practical replacement when the original cluster suffers display, needle or electrical faults.

Key Features

Clear analogue gauges with integrated digital odometer and warning lights. Direct drop‑in fit for compatible first‑generation Peugeot 3008 and 5008 instrument panel housings. Ideal for replacing clusters with faulty needles, dim or blank displays, or intermittent warning lights.

Technical Information

• Manufacturer: Stellantis / Peugeot
• Model: Peugeot 3008 I, Peugeot 5008 I
• Product Codes: 9805232380, 9810462780
• Additional Numbers: Displayed Mileage: approx. 98,000 km

Compatibility

Fits first‑generation Peugeot 3008 and 5008 instrument clusters. When searching, customers commonly use the product codes above to find the correct replacement unit.

How To Replace

• Disconnect the negative battery terminal before starting work to prevent short circuits and protect vehicle electronics.
• Remove trim panels around the steering column and dashboard to access the cluster. Keep fasteners and clips organized.
• Unscrew the instrument cluster mounting screws and carefully pull the cluster forward.
• Disconnect electrical connectors and remove the unit.
• Install the replacement cluster by reversing the removal steps. Reconnect the battery only after reassembly.
• Note: Some used clusters may require coding or initialization to restore full functionality of certain features—this should be performed with appropriate diagnostic tools if necessary.

Installation Recommendations

• Work With Clean Hands And Soft Tools To Avoid Scratching The Lens And Bezel.
• Use Correct Screwdrivers And Torx Bits To Prevent Fastener Damage.
• Avoid Pulling On Wiring; Always Release Connector Locks First.
• For Any Coding Or Initialization, Use Professional Diagnostic Equipment Familiar With PSA/Peugeot Systems.
• Always Observe Safety Procedures When Working Near The Airbag And Steering Column.

Why The Part Fails Most Often

• Electronic Component Wear: Faulty solder joints, capacitors, or voltage regulators can cause intermittent display failures or total blackout.
• Stepper Motor Wear: Needle mechanisms driven by small stepper motors can lose accuracy or stop moving.
• Moisture And Corrosion: Water ingress or high humidity can corrode connectors and PCB traces, leading to malfunctions.
• Electrical Surges Or Poor Battery Connections: Voltage spikes or poor grounding may damage the cluster electronics.
• Mechanical Damage: Impact or improper removal can crack the housing or damage internal components.

Advice For Buyers

Search By Product Code For Fast Matching. If you install a used cluster showing different mileage, be aware of legal and technical requirements in your region regarding odometer changes and adaptation. When in doubt about coding or initialization, entrust the final steps to a qualified technician with PSA diagnostic tools.

This used instrument cluster is a direct-fit replacement for first-generation Peugeot 3008 and 5008 vehicles. It contains the speedometer/tachometer and associated gauges without the multifunction LCD. The unit shows 188,000 km on the odometer and is suitable for mechanics and skilled DIYers who need a plug-in dash cluster for repair or replacement.

Key Benefits

Reliable visual readout of vehicle speed and engine RPM, straightforward mechanical fitment into original dashboard opening, and direct compatibility with many first-generation 3008/5008 installations. Ideal when the original cluster has display failures, missing segments, or internal electronic faults.

Installation And Replacement Process

• Disconnect The Battery Before Starting Work To Prevent Short Circuits And Protect Vehicle Electronics.
• Remove Trim Panels And Steering Column Shrouds Necessary To Access The Cluster Mounting Screws.
• Unscrew The Cluster Retaining Screws And Carefully Pull The Unit Forward.
• Disconnect The Electrical Connectors (Note Their Positions Or Photograph For Reassembly).
• Install The Replacement Cluster, Reconnect Connectors, Refit Screws And Trim, Then Reconnect The Battery.
• After Installation, Verify All Gauges And Warning Lights Operate Correctly. Some Vehicles May Require Diagnostic Communication To Restore Full Functionality.

Technical Information

• Manufacturer: Stellantis (Peugeot)
• Model: Peugeot 3008 I, Peugeot 5008 I (First Generation)
• Product Codes: 9666276380, 9805170680, 6103Y4
• Additional Numbers: 6103.Y4
• Mileage On Unit: 188000 km
• Category: Instrument Cluster / Gauges

Compatibility Notes

Designed For First-Generation Peugeot 3008 And 5008 Dash Assemblies Without The Multifunction LCD. Year Ranges For First-Generation Models Typically Cover Late 2000s To Mid-2010s; Always Check Connector Layout And Mounting Points To Confirm Fitment.

Reasons For Failure (Most Common)

• Electronic Component Degradation Over Time (Aging Capacitors, Solder Joint Fatigue).
• LCD Or Segment Failure Caused By Thermal Stress Or Moisture Ingress.
• Electrical Surges Or Poor Grounding Leading To Malfunctioning Gauges Or Backlighting.
• Physical Damage From Impact Or Improper Removal/Installation.

Installation Recommendations

• Perform Work In A Static-Free Environment Where Possible And Avoid Pulling On Wiring Harnesses.
• Document Connector Positions Before Disconnection (Photo Is Helpful).
• Use Proper Tools To Remove Trim And Screws To Avoid Breakage Of Plastic Clips.
• If The Cluster Requires Coding Or Immobilizer Adaptation, Use Official PSA Diagnostic Equipment (DiagBox) Or A Qualified Workshop.
• After Fitment, Check All Lighting, Gauges And Warning Indicators During A Road Test.

Additional Remarks

This is a used unit intended for repair or replacement purposes. The odometer reading shown on the cluster is 188,000 km. Depending On Vehicle Security And Immobilizer Configuration, Some Units May Require Coding Or Adaptation To Restore Full Functionality.

Regularly replacing this display is crucial as it can wear out over time due to factors like exposure to moisture and heat, which may lead to display malfunctions. A timely replacement ensures consistent access to important data such as speed, fuel consumption, and maintenance alerts.

Technical Information

• Manufacturer: PSA CITROEN PEUGEOT
• Model: Peugeot 3008 I, Peugeot 5008 I
• Product Codes: 9666247580, 9808993180, 6593G1
• Additional Numbers: 6593G2

This model does not feature a multifunction display, allowing for a straightforward, user-friendly interface. Ideal for both professional mechanics and DIY car enthusiasts, it serves as an essential component for maintaining your vehicle.

Commonly sought by customers under product numbers 9666276380, 9805170680, and 6103Y4, its reliability and accuracy make it a valuable addition to any repair shop or personal toolkit.

Technical Information

• Manufacturer: PSA
• Model: Peugeot 3008 I, Peugeot 5008 I
• Product Codes: 9666276380, 9805170680, 6103Y4
• Additional Numbers: 201000