The speedometer for Citroën C1 and Peugeot 107 cars with code 83800-0H013 is intended as a replacement instrument panel for displaying speed and range. The part comes from a car with approx. 88,000 km mileage, suitable for repairs after a defect in the original speedometer or for replacement after damage to the instrument panel. It is often searched by product number 83800-0H013.

Technical information:
Manufacturer: PSA (Citroën / Peugeot)
Model: Citroën C1 (1st generation), Peugeot 107 (1st generation)
Product codes: 83800-0H013
Other numbers: 838000H013

Installation recommendations:
– Before assembly, disconnect the battery (to protect the electronics and prevent errors in the system).
– Remove the dashboard covers and the instrument panel carefully so as not to break the plastic fasteners.
– Check the connectors and wiring (oxidation of pins, allowed contacts) and clean them if necessary.
– After assembly, verify the function of the backlight, indicators and warning lights by switching on the ignition and a short test drive.

The reason why the part most often goes wrong:
The most common cause of a tachometer malfunction is an electronic malfunction (cold connections on the printed circuit board), voltage fluctuations in the on-board network, or a problem with the contacts in the connector (oxidation, loosening). In some cars, the backlight may fail or the indicator functions irregularly due to vibrations and long-term operation.

Original instrument shield – speedometer/speedometer (alarm) for Citroën C1 and Peugeot 107 in version with robotic transmission. These are used OEMs with codes 83800-054 and B000616480 (NFP-no longer produced). This piece is located 134 000 km. Great solution for replacing non -functional alarm clocks with backfill defects, indicators or displays, without the need to modify the cabling.

Suitable for first -generation cars (2005–2014), where the instrument panel shows speed, fuel gauge, lights and in the robotic gearbox also the indication of the modes and the degree (eg N, R, E/M, 1-5). Thanks to the original design it fits into the original handles and communicates with the on -board network as the manufacturer intended. This minimizes compatibility problems and improperly displaying the gearbox functions.

In practice, the assembly is a direct replacement: After disconnecting the battery, the upper cover of the dashboard is removed, the instrument panel screws are released and a multi -year connector is disconnected. The otometer is part of the combined device – after mounting, a raid stored in this shield is displayed. Before installing, we recommend comparing the shape of the connector and the shield with your original work.

Typical reasons for replacement: non -functional or fluctuating underflow, incorrectly shown speed or fuel level, uncomfortable display segments, clear cover damage or consequences of leakage into the dashboard. This piece will help quickly restore the readability and reliability of the devices and shorten the repair time to a minimum.

technical information
Manufacturer: Citroën / Peugeot (PSA)
Model: Citroën C1 I (2005–2014), Peugeot 107 I (2005–2014), version with robotic transmission
Product codes: 83800-054; B000616480
Other numbers: NFP

To verify compatibility, always check parts of parts 83800-054 and B000616480 and match the design with your original speedometer. If you are unsure, also compare connectors and equipment (robotic transmission).

If you are looking for a trustworthy and reliable replacement tachometer for your vehicle, this used tachometer from a Citroën C1 and Peugeot 107 is an excellent choice. The part comes from a car with a mileage of 130,000 km and is ready for further use. The tachometer is essential for accurately monitoring the vehicle’s speed and maintaining safe driving. Investing in a quality used part is both an economical and eco-friendly solution. This particular model is highly sought after by many owners and service centers for Citroën and Peugeot vehicles.

Technical Information:

• Manufacturer: PSA (Peugeot Société Anonyme)
• Model: Citroën C1, Peugeot 107 (First Series)
• Product Codes: 83800-0H011-A, 6105F0, 6103AT
• Other Numbers: N/A

This tachometer is designed for installation in Citroën C1 and Peugeot 107 first series vehicles and is easily replaceable, allowing for quick and simple mounting. Its main function is to provide accurate and reliable speed information for the vehicle. Given that this particular unit has only 130,000 km on it, its durability and reliability are considerable. By purchasing this tachometer, you will acquire a dependable part without the need to invest in a new and expensive one.

Restore the functionality of your vehicle with this quality tachometer. Its history and proof of origin present an ideal solution for those seeking an effective replacement for the original part. Remember, used parts like this help keep your car running while promoting sustainability by minimizing the need for new manufacturing materials and energy.

Searching for a reliable and high-quality tachometer for your Citroën C1 or Peugeot 107? This tachometer, bearing the part number 83270-0H010, is fully functional and compatible with Citroën C1 and Peugeot 107 vehicles. It is the perfect replacement part for faulty or damaged tachometers and is ready for immediate installation.

Designed specifically for vehicles with the 1.0 1KR engine, covering model years from 2005 to 2013. The package includes a matching tachometer housing in grey MITO, ensuring seamless integration into your vehicle’s interior. This tachometer not only improves the vehicle’s functionality but also enhances its aesthetic appeal.

Technical Information

• Manufacturer: PSA Group (Peugeot & Citroën)
• Model: Citroën C1, Peugeot 107
• Product Codes: 83270-0H010-A, 6106SK, 6105VL, 6106SF, 83270-0H010-D, 83270-0H010-J
• Additional Numbers: 83270-0H010

If your vehicle requires a reliable tachometer, this part is an excellent solution. Installation is quick and straightforward, appreciated by both professional mechanics and DIY car enthusiasts. Enhance the functionality and reliability of your vehicle with this high-quality tachometer.

Are you looking for a reliable speedometer for your CITROËN C1 or PEUGEOT 107? We offer a quality speedometer that is the ideal choice for those who prefer original parts at a reasonable price. Although the mileage is unknown, this speedometer has been carefully designed to meet all functional requirements and ensure reliable performance.

This speedometer is not only affordable but also easy to install, allowing you to quickly get your vehicle back on the road. Its importance for accurate and reliable speed and distance measurement is key to safe and efficient driving.

Technical Information:
Manufacturer: OEM for Citroën and Peugeot
Model: Citroën C1, Peugeot 107
Product Codes: 83800-0H011-A
Other Numbers: Not available

Our speedometer is perfect for auto mechanics and DIY enthusiasts who require reliability and authenticity in their replacement parts. The installation of this speedometer is straightforward and does not require special tools, making it a practical choice for the everyday maintenance of your vehicle. It accurately measures all important functions of the car and is an essential addition for anyone looking to keep their automobile in top condition.

Order this speedometer today and ensure that your car is equipped with only the best parts on the market! With its original specifications and compatibility with Citroën C1 and Peugeot 107 vehicles, it is the clear choice for your next speedometer replacement.

Welcome to all owners and service technicians of Citroën C1 and Peugeot 107 vehicles! If you are looking for a reliable replacement tachometer, this unit with reference numbers 83800-0H190 and B000698480 could be the ideal solution for your needs. Our used tachometer comes from a model with an automated transmission and has recorded only 119822 km, making it a high-quality and verified component for your vehicle.

Technical Information
Manufacturer: PSA CITROËN PEUGEOT
Model: Citroën C1, Peugeot 107
Product Codes: 83800-0H190, B000698480
Additional Numbers: N/A

This tachometer is intended for the first generation of Citroën C1 and Peugeot 107 vehicles equipped with a robotic transmission. Tachometers are crucial for accurately displaying the vehicle’s current speed and total mileage, making them an essential component for safe and efficient driving. By accurately tracking distance traveled, it also aids in planning regular maintenance and service inspections.

The installation of this tachometer is relatively straightforward. If needed, we recommend contacting a professional service to ensure proper installation and guarantee that everything functions as it should. Since this is a used part, we recommend performing a visual inspection before installation to confirm that the product shows no signs of damage.

We offer this tachometer as a quality and affordable alternative to new parts. Why invest in more expensive components when you can have certified quality for a fraction of the price? Order now and ensure that your vehicle is operational soon with precise and reliable information.

Product Overview

Replacement instrument cluster (speedometer/odometer) for Citroën C1 and Peugeot 107. This genuine used unit carries OEM identification and multiple cross-reference numbers, making it a practical choice for mechanics and experienced DIYers looking for an immediate replacement to restore vehicle instrumentation. Ideal for vehicles showing faults such as dead gauges, intermittent backlighting, or erratic speed readings where the cluster is the suspected cause.

Benefits

• Direct fit for Citroën C1 / Peugeot 107 instrument panel housings and mounting points.
• OEM compatibility reduces installation time and ensures correct connector fitment.
• Good option when replacement of individual stepper motors or circuit repairs is not desired.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Citroën C1; Peugeot 107
• Product Codes: 83800-0H012-A
• Other Numbers: 6105F9, 6103CF, 6103AT
• Mileage On Unit: Approximately 128,000 km

How It Is Replaced

Typical replacement steps for a competent mechanic or experienced DIYer:

1. Disconnect the negative terminal of the battery before starting to avoid short circuits and to protect vehicle electronics.
2. Remove surrounding trim panels and bezel carefully to avoid breaking clips.
3. Unscrew the retaining screws securing the instrument cluster and gently pull the unit forward.
4. Unplug electrical connectors (take care with locking tabs) and remove the old cluster.
5. Install the replacement unit by reversing the removal procedure, reconnecting connectors, re-seating the cluster and refitting trim.
6. Reconnect the battery and verify all functions: speedometer, odometer, indicator lights, backlighting and warning lamps.

Note: Depending on vehicle specification and equipment, some functions or settings may require basic configuration or adaptation via PSA diagnostic tools (e.g., DiagBox/Lexia) to restore features such as trip settings or illumination levels.

Installation Recommendations

• Always disconnect the battery before removing the instrument cluster.
• Work on a clean, static-free surface and avoid touching circuit boards or connectors unnecessarily.
• Use proper trim tools to prevent damage to dash panels and clips.
• Check connector pins for corrosion or bent contacts before installation.
• After installation, run a full systems check: gauges, warning lights, illumination, and switch functions.
• If any functionality is missing after fitting, consider professional diagnostic equipment for configuration.

Why This Part Fails

Common failure causes for instrument clusters include:

• Age and Wear: Stepper motors used to drive needles can wear out or lose torque, causing stuck or jumping gauges.
• Cold/Heat Cycling and Vibration: Repeated thermal stress and vibration can cause solder joints or surface-mount components to crack.
• Moisture Ingress: Condensation or leaks can corrode connectors and circuit traces, leading to intermittent faults or total failure.
• Electrical Surges: Voltage spikes from charging system faults or jump-starts can damage illumination circuits or the cluster electronics.

Suitability And Notes

This unit is suitable for direct replacement on compatible Citroën C1 and Peugeot 107 vehicles that use the referenced part numbers. Because the mileage displayed on the cluster reflects the unit’s internal odometer reading, vehicle owners and professionals should be aware of local legal requirements regarding odometer replacement or disclosure.

Purchase Advice

For mechanics and experienced DIYers seeking a time-efficient solution, this OEM instrument cluster is a practical option. Inspect connectors and functionality immediately after installation and keep records of the mileage change if required by local regulations. Order now to restore full instrumentation and onboard information to your Citroën C1 or Peugeot 107.

This high-quality Tachometer is designed specifically for Citroën C1 and Peugeot 107 models, ensuring accurate readings and reliable performance. It is essential for monitoring your vehicle’s speed and overall functionality, making it a crucial component for both professional technicians and DIY car enthusiasts.

The Tachometer often needs replacement due to wear and tear or electronic failure, commonly arising from electrical issues or aging components. Regular checks can help prevent unexpected failures and ensure your vehicle remains in optimal working condition.

Technical Information

• Manufacturer: PSA
• Model: Citroën C1, Peugeot 107
• Product Codes: 83800-0H011-A, 6105F0, 6103AT
• Additional Numbers: 164000

This component is essential for monitoring vehicle speed accurately, ensuring that you have the necessary data for safe driving. Speedometers can often fail due to electrical issues, wear and tear, or physical damage from impacts. Regular checks can help in identifying malfunctions early.

Replacing the speedometer is a straightforward process, typically involving the removal of the dashboard panel and disconnecting the old unit. It is recommended to consult your vehicle’s service manual for detailed instructions.

Technical Information

• Manufacturer: PSA
• Model: Citroën C1, Peugeot 107
• Product Codes: 83800-0H141-A, 6105SF, 6105F3, 6103AX
• Additional Numbers: 6105SF, 65000km

Commonly used in the Citroën C1 and Peugeot 107, the part number 83800-0H010-C provides a seamless replacement option for malfunctioning speedometers. Regular use can lead to wear and tear, often resulting in inaccurate speed readings or complete failure. Addressing speedometer issues promptly is vital for maintaining driving safety and vehicle functionality.

Technical Information

• Manufacturer: PSA
• Model: Citroën C1, Peugeot 107
• Product Codes: 83800-0H010-C
• Additional Numbers: Not Applicable

Replacing the speedometer is straightforward for those familiar with vehicle maintenance. Typically, it requires disassembling the dashboard and removing the faulty unit, followed by installing the new speedometer and reconnecting all wiring.