Description

This starter motor is designed for a range of Citroën and Peugeot models equipped with small petrol engines (1.2, 1.4 16V VTI and 1.6 16V VTI). It delivers reliable cranking torque needed for cold starts and regular everyday use. The unit is commonly identified by the manufacturer and part numbers and is frequently searched by these codes when sourcing replacement parts.

Technical Information

• Manufacturer: Stellantis
• Model: Citroën Berlingo B9; Citroën C3 Picasso; Citroën C4 II; Peugeot 207; Peugeot 308; Peugeot Partner Tepee
• Product Codes: M000T32271ZE, 5802AR
• Additional Numbers: 1638135680

Applications

Fits a variety of Citroën and Peugeot small petrol engine vehicles using 1.2, 1.4 16V VTI and 1.6 16V VTI engines. Always verify the part number to ensure compatibility with the engine variant and model year.

How It Works

The starter motor engages the engine flywheel via a pinion gear driven by an electric motor and a solenoid. When the ignition switch is turned, the solenoid pushes the pinion to mesh with the ring gear and closes the high-current circuit to spin the engine. After the engine starts, the pinion retracts and the starter stops.

Replacement Procedure

• Disconnect Negative Battery Terminal: Always disconnect the negative battery cable before starting work to avoid short circuits.
• Access Starter: Depending on the model, the starter is accessible from the engine bay or underneath the vehicle. Raise and securely support the vehicle if working from below.
• Label Electrical Connections: Mark and remove the main power cable and any control wires to avoid reconnection errors.
• Remove Mounting Bolts: Unbolt the starter from the bell housing. Support the starter while removing the final fastener to prevent it from dropping.
• Install New Unit: Position the replacement starter, tighten mounting bolts to manufacturer specification, reconnect electrical connections ensuring clean and tight contacts.
• Final Checks: Reconnect the battery, verify starter engagement and listen for unusual noises. Check for oil leaks or damaged ring gear teeth that could affect operation.

Why Starters Fail

• Worn Brushes and Commutator: Mechanical wear inside the motor reduces performance over time.
• Solenoid Failure: The solenoid can stick or fail electrically, preventing engagement or current flow.
• Contamination: Oil ingress from engine seals or excessive dirt can contaminate internal parts and cause premature wear.
• Electrical Issues: Poor battery condition, corroded terminals, or damaged wiring lead to inadequate cranking current.
• Mechanical Damage: Damaged pinion or ring gear teeth from repeated slipping or incorrect engagement.

Recommended Service Life

Service life depends on driving conditions, climate and maintenance. Typical starters can last many years or well over 100,000 km in normal use, but repeated short trips, frequent cold starts or electrical problems shorten lifespan.

Recommendations For Installation

• Use Correct Tools: Ensure safe lifting and proper sockets; avoid damaging electrical connectors.
• Check Battery Health: Confirm battery voltage and cranking amps before replacing starter to avoid unnecessary replacements.
• Inspect Flywheel Ring Gear: Look for worn or damaged teeth that can cause noise or engagement problems.
• Clean Connections: Clean and tighten battery and starter terminals; apply suitable anti-corrosion treatment to connectors if appropriate.
• Follow Manufacturer Torque Specs: Tighten mounting bolts to the vehicle manufacturer’s recommended torque to ensure proper alignment and sealing.

Note

Part numbers are frequently used to find this starter: M000T32271ZE, 5802AR, 1638135680. Confirm the part code matches the unit required for your engine variant and vehicle model before purchase.

Looking for a reliable starter for your Citroën, Peugeot, DS, or even FIAT, Opel, and Toyota vehicles? This Valeo starter is a perfect match for 1.2 THP VTi PureTech engines, renowned for their efficiency and performance. Its robust construction ensures long-lasting operation without frequent replacements, appreciated by both professional mechanics and car enthusiasts performing DIY repairs.

Technical Information

Manufacturer: Valeo
Model: ESM18E7, ESM18-11
Product Codes: 9807545980
Additional Numbers: Specifications for 1.2 THP VTi PureTech engines

This Valeo starter is designed to meet the requirements of several vehicle models including Citroën Berlingo III, Citroën C-Elysée, Citroën C1 II, DS4, Peugeot 108, Peugeot 301, Peugeot Partner III, and Peugeot Rifter. Installation is straightforward, allowing quick and hassle-free replacement at a workshop or by skilled DIYers. As a vital component for proper engine starting, its reliability ensures worry-free vehicle operation.

This used Valeo starter is inspected and ready for installation. It is often sought after for older vehicles due to its ability to deliver quality performance at a reasonable cost compared to a new part. When installed correctly, this starter can rejuvenate your vehicle’s starting system and prevent issues commonly caused by worn or malfunctioning starters.

Optimize your vehicle’s performance with this high-quality used part and enjoy a smooth, effortless start every time. If you need a dependable replacement for your original starter, this Valeo product is an excellent choice.

This starter model is renowned for its durability and reliability. It’s designed to deliver consistent performance even after prolonged use, ensuring your vehicle starts smoothly in all conditions—from cold mornings to hot summer days.

Technical Information

Manufacturer: Valeo
Model: Citroën Berlingo III, Citroën C1 II, DS4, Peugeot 108, Peugeot Partner III, Peugeot Rifter
Product Codes: ESM18E8
Additional Numbers: 9674077280

Using the correct starter guarantees trouble-free engine ignition every time. Valeo’s starter units are engineered for maximum efficiency and longevity. Their robust design helps prevent common starter failures caused by wear over time.

Regarding installation, this starter is compatible with a variety of car models and can generally be replaced with basic mechanical tools and moderate technical skills. Many online tutorials and guides are available, enabling skilled DIY mechanics to complete the replacement themselves.

If you have any questions about specifications or installation procedures, feel free to contact our customer support team. They will provide you with detailed information to ensure the correct starter is selected and properly installed in your vehicle.

Don’t wait for a starter failure to disrupt your daily driving. Renew this critical engine component today with the Valeo starter and enjoy reliable vehicle starts on every journey. Order now to secure quality and reliability for your car.

Looking for a reliable starter for your Citroën or Peugeot vehicle? You have found the right choice! We offer a used DENSO starter compatible with Citroën and Peugeot models equipped with 1.2 or 1.0 engines. This starter is an ideal replacement for the original part, ensuring smooth and trouble-free engine starts.

The starter is an essential component of any vehicle as it is responsible for effectively initiating the engine start-up process. Given its importance, it is crucial to have a starter that is dependable and highly functional. This particular DENSO starter maintains high standards of quality and performance.

Technical Information

• Manufacturer: DENSO
• Model: Compatible With Citroën And Peugeot Vehicles
• Product Codes: 9641530880, 9688477380, 1608064680, 9671530880
• Additional Numbers: N/A

This starter is especially suitable for Citroën C1 II and Peugeot 108 models. It is designed for 1.0 and 1.2 engines, making it the perfect replacement for your vehicle’s original starting system. Installation is straightforward and hassle-free, saving you time and allowing you to get back on the road quickly.

Take advantage of the opportunity to acquire high-quality and proven automotive parts at competitive prices. With our DENSO starter, you gain not only reliability but long-lasting durability and performance essential for your automotive needs.

Are you looking for a reliable replacement starter for your Citroën or Peugeot vehicles? We offer a starter compatible with various models from both manufacturers. This part has undergone thorough inspection to ensure proper and efficient operation. Guarantee a smooth engine start with this high-quality component.

Technical Information:

Manufacturer: Original Citroën Peugeot Part
Model: Compatible with Citroën Berlingo, Citroën C-Elysée, Citroën C3 Picasso, Citroën C4, Peugeot 207, Peugeot 301, Peugeot 308, Peugeot Partner, and others. Specifically suitable for 1.2 all types, 1.4 16V VTI, and 1.6 16V VTI engines.
Product Codes: M000T32272, V764559480, 1638135680, 1609870380. Supplementary code V764559080.
Additional Numbers: An alternative for original number V764559080.

As a crucial component of your vehicle’s engine system, the starter provides the necessary initial impulse to start the engine. Starters often wear out due to intense usage, especially during cold seasons, which can cause sudden and unexpected failures. Our product, though pre-owned, guarantees reliability and long-term performance due to prior expert inspection and control.

The compatibility across diverse models and engine types makes this starter an ideal choice for Citroën and Peugeot owners. If you are uncertain about compatibility with your vehicle, do not hesitate to contact us for further assistance. Ensure this part matches your car’s specifications for optimal performance.

This starter is ready to give your vehicle a new lease of life. Don’t wait for an unexpected breakdown—secure a dependable replacement today! Suitable for both home mechanics and professional auto technicians, this starter is an excellent solution to keep your vehicle operational.