This high-quality 160 mm replacement speaker is designed as a direct-fit option for a range of Citroën and Peugeot models. Sold under OEM references, it matches factory mounting dimensions and acoustic characteristics to restore clear midrange and vocal reproduction in door or parcel-shelf installations. Frequently searched by part numbers, this unit is suitable for professional workshops and DIY mechanics who demand reliable fitment and straightforward installation.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Citroën C4 Cactus; Citroën C4 II; DS4; DS5; Peugeot 208; Peugeot 508
• Product Codes: 9665231880; 1609985080; 6562CP
• Additional Numbers: Diameter 160 mm

Installation Recommendations

Installation is straightforward for experienced technicians and competent DIYers. Typical steps:

• Remove the door card or speaker grille using appropriate trim tools to avoid damaging clips and panels.
• Unplug the original speaker connector and unscrew the factory speaker from its mounting.
• Transfer any foam gasket or adapter plate from the old speaker if required, then fit the replacement speaker, observing correct polarity of the speaker wires.
• Reconnect the speaker harness, test playback at low volume to confirm function and polarity, then secure the speaker and reassemble the trim.

Use the correct fasteners and avoid overtightening. Inspect connector contacts for corrosion and clean or replace them if necessary. Follow the vehicle manufacturer’s service instructions for trim removal to prevent damage.

Why This Part Fails

• Mechanical wear: Foam surrounds and cones degrade over time, leading to reduced bass response and distortion.
• Water Ingress: Door speakers are vulnerable to moisture from leaks or poor sealing, which causes corrosion and voice-coil failure.
• Electrical Stress: Excessive amplifier power or short circuits can blow the voice coil, producing crackling or no sound.
• Connector Corrosion: Poor electrical contact due to oxidized terminals causes intermittent sound or loss of channel.

Notes for Purchase

This speaker is often identified by OEM part numbers 9665231880, 1609985080 and designation 6562CP. Verify these numbers against your vehicle’s parts list or the unit being replaced to ensure compatibility. The listed vehicle models are common fitments, but fitment can vary by trim and production year.

This 160 mm car speaker is a direct-fit audio replacement intended for a range of Citroën and Peugeot models. Designed for workshop use and competent DIY mechanics, the unit restores original sound staging and clarity in door or rear parcel shelf applications where a 160 mm driver is specified. The speaker is commonly referenced by OE and supplier codes, so customers frequently search by part number when sourcing a replacement.

How To Replace

Replacement is straightforward for a trained mechanic or an experienced DIYer. Typical steps:

• Remove the trim or door panel following the vehicle manufacturer’s procedure to avoid damaging clips and wiring.
• Disconnect the speaker connector and remove the mounting screws or bolts holding the old speaker.
• Compare connector type and speaker depth to ensure the new unit fits without modification. Observe speaker polarity (+/−) to maintain correct phase.
• Fit the new speaker, secure with the original fasteners or appropriate replacements, reconnect the connector and test audio before reassembling the trim.
• Reinstall trim, ensuring all clips and fasteners are correctly seated. Test road noise and audio performance after installation.

Installation Recommendations

• Work in a clean, dry area and protect interior trim panels during removal and reassembly.
• If speaker mounting holes or spacers differ, use appropriate adapters or gaskets to avoid rattles and to maintain correct speaker alignment.
• Check wiring and connector condition. Clean corroded contacts and ensure a secure electrical connection to prevent intermittent sound or noise.
• When possible, test the speaker with low volume first to confirm correct polarity and function before final reassembly.
• Disconnecting the battery is recommended when working on door electronics with powered windows or airbags nearby; follow safe workshop practices.

Why The Part Commonly Fails

• Age-Related Wear: Foam or rubber surrounds dry out and deteriorate over years, causing loss of bass response or rattling.
• Moisture Ingress: Water from door seals or condensation can damage the cone, voice coil, or terminals.
• Electrical Stress: Blown voice coils caused by prolonged overdrive or amplifier faults lead to distortion or no sound.
• Mechanical Damage: Impact or improper removal/installation can deform the cone or magnet assembly.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Citroën C4 Cactus; Citroën C4 II; DS4; DS5; Peugeot 208; Peugeot 508
• Product Codes: 9665231980; 6562CS; 1609985180
• Other Numbers: 160mm

Search Tip: This speaker is often located by its part numbers (9665231980 / 6562CS / 1609985180) or by the 160 mm size designation. If your vehicle specifies a 160 mm speaker for the door or rear shelf, this unit is a suitable replacement to restore factory-style sound. Ideal for professional garages and experienced DIY installers who value a straightforward, reliable fit.

This original JBL speaker is a direct-fit replacement removed from a Citroën C5 2006. It is ideal for mechanics and DIY enthusiasts who search by part number (9648278080, 6562J7) and want to restore the vehicle’s audio performance without complicated modifications. The speaker preserves the original mounting points and connector shape for an easy swap into compatible Citroën and Peugeot installations.

Installation Guide

Typical replacement requires basic tools and moderate experience. Common steps:

• Disconnect the negative battery terminal before starting electrical work.
• Remove the trim panel or speaker grille (door panel or parcel shelf depending on speaker location).
• Unscrew the original speaker, unplug the electrical connector and remove the unit.
• Fit the replacement speaker into the original mounting, connect the plug ensuring correct polarity, and secure fasteners without over-tightening.
• Test the speaker at low volume before reassembling the trim to verify correct operation and polarity. Finish reassembly when confirmed.

Technical Information

• Manufacturer: JBL
• Model: Citroën C5 (2006)
• Product Codes: 9648278080
• Other Numbers: 6562J7

Fitment And Compatibility

This speaker was fitted to a Citroën C5 (2006) and is compatible with vehicles that use the same OEM part numbers 9648278080 and 6562J7. Buyers often locate this part by its codes, so listing the numbers improves findability in searches for Citroën and Peugeot audio replacements.

Why Speakers Fail

Common causes of speaker failure include long-term wear, cone or surround deterioration, moisture ingress, or damage from excessive amplifier power or clipping. Mechanical damage and poor electrical connections can also cause distortion or loss of sound.

Mounting Recommendations

When installing, ensure the speaker frame sits flush against the mounting surface and use the correct fasteners to avoid vibration and rattles. Check the wiring harness for corrosion or damaged pins and replace any degraded seals or foam to prevent water ingress. If the vehicle has an aftermarket amplifier, confirm impedance and power compatibility to avoid overloading the new speaker.

Restore factory-like sound and reliability by replacing worn speakers with units that match the original part numbers. Search by 9648278080 or 6562J7 to find this exact JBL unit for Citroën and Peugeot applications.

This original-fit 165 mm (6.5″) speaker is a direct replacement for a range of Citroën and Peugeot models and is commonly searched by OE numbers 9664955980 and 6562X3. Designed for installers and DIY mechanics who demand reliable audio performance and perfect fitment, the unit restores factory sound staging and integrates with existing door mounts and wiring harnesses. Ideal for repairing blown or degraded factory speakers without modifications to the vehicle.

Key Benefits

• Direct fit for listed Citroën and Peugeot models – no cutting or adapter plates required in most installations.
• Standard 165 mm (6.5″) diameter that matches common factory mounting locations.
• OE numbers on listings help fast identification (9664955980, 6562X3).
• Balanced sound reproduction suitable for original audio systems and entry-level upgrades.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Citroën C3 Picasso; Citroën C4 Picasso; Citroën C5 X7; Peugeot 207; Peugeot 407
• Product Codes: 9664955980; 6562X3
• Additional Numbers: 6562.X3 (alternative notation); 165 mm

Installation Recommendations

Disconnect the battery before starting work to avoid short circuits. Remove the door card or speaker grille to access the factory speaker, unplug the wiring connector and unscrew the original unit. Compare the new speaker with the old one for mounting hole alignment and connector type. Transfer any factory foam gasket or mounting plates to ensure a tight seal and avoid air leaks that degrade bass response. Reconnect the speaker, secure screws evenly without overtightening to prevent frame warping, and test at low volume before reassembling the door. Use basic hand tools (screwdrivers, trim tools, socket set) and allow 30–90 minutes per door depending on vehicle trim. For vehicles with factory amplifiers or crossovers, verify polarity and connector pinout before final installation.

Why This Part Most Often Fails

• Age-Related Deterioration: Foam surrounds and spider suspensions dry out and crack over time, causing loss of excursion and distortion.
• Moisture Ingress: Door speakers are exposed to humidity and water from window seals; corrosion or cone delamination can occur.
• Overpowering: Excessive amplifier clipping or high volume listening can burn the voice coil, leading to partial or complete failure.
• Mechanical Damage: Pins, torn cones, or a damaged dust cap result from impact during door disassembly or foreign objects in the speaker.

Replacing the speaker with a correct 165 mm OE-fit unit restores audio clarity and prevents further damage to related components. This part is commonly searched by its OE codes, so listing those numbers when searching will help you find the correct replacement quickly.

High-quality 165 mm replacement speaker designed for a range of Citroën and Peugeot models. Ideal for professional workshops and DIY mechanics looking to restore clear, balanced sound in vehicle doors or rear deckboards. This speaker is commonly referenced by part numbers and fits original equipment locations where a 165 mm unit is specified. It delivers reliable midrange performance for radio, navigation prompts and cabin audio without demanding additional tuning or adapters in most standard installations.

Applications and Compatibility

Fits the following models (examples of typical applications): Citroën C2, Citroën C3, Citroën C3 II, Citroën C3 Pluriel, DS3, Peugeot 3008 I, Peugeot 308, Peugeot 5008 I. Often searched by part numbers: 9665245180, 6562AC, 6562X2.

Installation and Replacement

Replacement is straightforward for experienced technicians and competent DIYers. Typical steps:

• Remove the affected trim panel (door card or rear parcel shelf) following vehicle-specific removal procedures to avoid breaking clips.
• Disconnect the speaker electrical connector and note polarity (positive/negative) for correct reconnection.
• Unscrew the speaker from its mounting position and remove it carefully to avoid damaging the harness or trim.
• Position the new speaker, secure with the original screws or supplied fasteners, reconnect the connector and test audio before reassembling the trim.

Use appropriate hand tools and keep fasteners organized. Always avoid forcing plastic clips; use trim tools where possible to prevent damage.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Citroën C2; Citroën C3; Citroën C3 II; Citroën C3 Pluriel; DS3; Peugeot 3008 I; Peugeot 308; Peugeot 5008 I
• Product Codes: 9665245180, 6562AC, 6562X2
• Other Numbers: 965245180 (alternate reference)
• Size: 165 mm diameter

Installation Recommendations

Inspect the speaker connector and wiring for corrosion or damage before installation. Clean contact surfaces and ensure correct polarity to avoid phase issues. When reinstalling trim, verify that the speaker mounting surface is flat and free of debris to prevent buzzing. If the vehicle has a factory amplifier or sound system, test the speaker at low volume before full use to confirm compatibility and avoid damage from clipping.

Why This Part Typically Fails

Common failure causes include water ingress (especially in door-mounted speakers after damaged seals), foam or surround deterioration with age, mechanical damage from impacts, and electrical failure caused by amplifier clipping or overload. Burned voice coils and distorted cones are typical symptoms—listen for rattling, buzzing, loss of midrange, or complete silence.

Searching by part number (9665245180 / 6562AC / 6562X2) is a reliable way to find the correct replacement speaker for affected Citroën and Peugeot vehicles.

High-frequency tweeter speaker designed as a direct replacement for Peugeot 206 audio systems. This compact driver restores clear, detailed highs and vocal presence that are often lost when original tweeters age or are damaged. Ideal for professional workshops and DIY mechanics, the unit is frequently searched by its OEM numbers, making it easy to find and fit. Compatible with factory speaker crossovers and amplifiers when the OEM part codes below match the vehicle.

Key Benefits

Improves vocal clarity and instrument detail in the upper frequency range. Simple mechanical fitment for quick service times in door trim, dash or A-pillar locations depending on original vehicle layout. Helps eliminate distortion, rattles and reduced output caused by failed tweeter diaphragms or voice coils.

Technical Information

• Manufacturer: Stellantis / Citroën / Peugeot
• Model: Peugeot 206
• Product Codes: 9640322880, 9666384580
• Other Numbers: 6562G9, 6262A8

Compatibility And Fitment

Primary fitment is Peugeot 206 (various body styles and equipment levels). Use the OEM product codes above to confirm direct replacement fitment for the vehicle. This tweeter is intended to replace the original high-frequency driver without modification when the part numbers match.

Function And Typical Failure Causes

Tweeters reproduce the high-frequency portion of the audio spectrum, adding clarity to voices, cymbals and other high-frequency content. Common causes of failure include:

• Overload or Distortion: Excessive volume or amplifier clipping can burn the voice coil.
• Moisture Ingress: Water or condensation in door/a-pillar areas leads to corrosion and membrane damage.
• Physical Damage: Impact during door removal/installation or panel replacement can deform the dome.
• Ageing And Wear: Long-term heat and UV exposure degrade diaphragms and adhesives.
• Electrical Faults: Faulty crossover components or amplifier issues can reduce output or damage the tweeter.

Installation Recommendations

Recommended for installation by trained technicians or experienced DIYers. General replacement steps:

• Remove Interior Trim: Carefully remove the door panel, A-pillar trim or dash grille to access the tweeter. Use appropriate trim tools to avoid damaging clips.
• Disconnect Power Sources As Needed: For safety, isolate the audio system (turn ignition off). Disconnecting the vehicle battery is optional for speaker replacement but recommended if you will work near airbags or vehicle electronics.
• Unplug Connector: Disconnect the tweeter electrical connector. Note connector orientation and clip positions for reassembly.
• Remove Mounting Hardware: Unscrew or unclip the tweeter from its mounting bracket or housing.
• Install New Unit: Fit the replacement tweeter, secure mounting hardware and reconnect the electrical connector with correct polarity.
• Test Audio: Before reassembling trim, test the speaker at moderate volume to verify correct operation and polarity. Refit trim panels ensuring no pinched wiring.

Why Replace The Tweeter

Replacing a failed tweeter restores the high-frequency balance of the audio system and prevents listener fatigue caused by distortion or missing frequencies. Replacing only the failed driver is cost-effective compared with full speaker set replacements when other speakers are still in good condition.

Search And Identification Tips

Customers and workshops commonly search by OEM codes 9640322880, 9666384580, 6562G9 and 6262A8. Including these numbers in your search will increase the chance of finding the exact replacement part. Use clear photos of the existing tweeter and connector when in doubt.

Notes For Workshops

Keep replacement tweeters in stock by common OEM number to minimize vehicle downtime. When replacing speakers on vehicles with factory amplifiers or active crossovers, verify amplifier settings and polarity to avoid damage to the new driver.

High-quality replacement speaker designed for Citroën and Peugeot applications, referenced under part numbers 9643162980 and 6562E8. Ideal for professional mechanics and DIY enthusiasts who need a reliable, direct-fit audio unit that restores clear mid-range sound. This speaker is commonly listed in searches by its product codes, so including those numbers when searching or ordering will speed up locating the correct part.

Features

• 130 Mm Diameter: Compact midrange unit suitable for many factory speaker locations.
• Direct-Fit Replacement: Designed to match original mounting dimensions and connector interfaces used on compatible Citroën/Peugeot models.
• Robust Construction: Built to withstand automotive operating conditions and deliver consistent sound reproduction.
• Suitable For Workshop Use: Practical choice for quick speaker swaps during door or trim repairs.

Technical Information

• Manufacturer: Stellantis
• Model: Citroën C3 (Common Application) / Various Citroën And Peugeot Models
• Product Codes: 9643162980, 6562E8
• Additional Numbers: 656200000000, 9634826580, 9634826680

Installation Recommendations

• Safety First: Disconnect the vehicle battery before starting work to avoid short circuits when handling electrical connectors.
• Remove Trim Carefully: Pry off door or trim panels using appropriate trim tools to avoid breaking clips or scratching panels.
• Disconnect Connector: Unplug the speaker harness and note any foam seals or gasket placement for correct reassembly.
• Secure Mounting: Fit the new speaker into the original mounting position, use the correct screws, and ensure the speaker sits flush to avoid rattles.
• Test Before Final Fitment: Power the audio system briefly to verify operation and polarity before reinstalling trim panels.

Reason Why Part Fails Most Often

• Mechanical Damage: Cone tears or punctures from physical impact during door repairs or by sharp objects.
• Moisture Ingress: Water reaching the speaker (from window seals or door leaks) causes corrosion and cone/voice-coil damage.
• Ageing Materials: Foam surrounds and adhesives degrade over time, producing distortion or loss of output.
• Electrical Overload: Excessive amplifier power or short circuits can burn the voice coil and render the speaker inoperative.
• Connector Corrosion: Poor electrical contact due to oxidized terminals leads to intermittent sound or complete failure.

Notes

Part numbers such as 9643162980 and 6562E8 are commonly used when searching for this speaker. Confirm the listed codes against your vehicle documentation or parts lookup to ensure compatibility with the intended mounting location.

Original Tweeter for Citroën C-Crosser and Peugeot 4007. Suitable for all doors for standard audio systems-does not fit on cars with Audio 3 and Multivision equipment. An ideal replacement for a non -functional or distorting tweeter that will return net heights, space and clarity of sound to your interior.

The part is designed as a direct replacement with the original attachment and a connector, so the replacement takes place without modifications. Thanks to the same shape of the collar and locks, it fits into the original holder in the triangle by the mirror (Sail panel) on the front and rear doors at the equipment without a premium multimedia unit.

Compatibility and tips for assembly
– Compatible with standard audio equipment (without audio 3 / multivision).
– Replace procedure: Carefully remove the plastic triangle by the mirror, disconnect the tweeter connector, release the original speaker (latch/screw), attach the new part, plug the connector and try the function before installing the lining. Work usually takes units of minutes per piece.
– To verify the suitability, we recommend comparing the part number on your old speaker with the codes below or verify by VIN.

What is the tweeter for and why is left
The tweeter processes the highest frequency band (height) and complements the main door speaker. Typical symptoms of the failure are missing heights, cracking or intermittent sound. This is due to mechanical damage to the membrane or tired switch/protection in the body of the tweeter. The replacement is fast and represents a cost -effective repair with an immediate effect on listening quality.

technical information

• manufacturer: dog/Citroën • Peugeot (OEM)
• Model: Citroën C-Crosser (about 2007–2012), Peugeot 4007 (about 2007–2012)
• product codes: MR986377, 6563T3
• Other numbers: 6563.t3, MR 986377

Why choose the original part
The original tweeter preserves the factory character of the sound and fits smoothly to the original location without adjusting wiring or attachment. Easy assembly, reliable compatibility and certainty of the right size make this option the fastest way to a fully functional audio system.

Original door speaker for Citroën C -Crosser and Peugeot 4007. These are the OEM part of the PSA concern with numbers 8720A017, 6562R8 and 1612537280.

Designed for all doors (front and rear) models, except for vehicles equipped with above -standard audio systems “Audio 3” and “Multivision”. For easy compatibility verification, compare the part number on your original speaker and the shape of the connector.

Why this part changes: door speakers in older cars often leave due to moisture in the door, fatigue material or mechanical damage to the membrane. This is manifested by greater volume, loss of bass or complete outage of one channel. Replacing for the original speaker restores the original sound and reliability.

How is the exchange (general recommendation):

• Remove the door fill (screws, plastic buckles) and carefully disconnect the bowden and wiring.
• unscrew the old speaker, disconnect the connector and check the seal and foil against moisture.
• Install a replacement speaker in the original mounting points, connect the connector and perform a short audio test.
• Carefully return the door fill and check that nothing does not resonate.

Key advantages of the original episode:

• OEM Quality and accurate attachment, including the correct fit depth.
• Compatibility with original vehicle cabling – without modification.
• recovery of factory sound without compromise.

Note to condition: The original part used can carry common cosmetic signs of use that do not affect the function. Always compare the part numbers and the connector with your car to be sure.

technical information

• Manufacturer: PSA (Citroën/Peugeot)
• Model: Citroën C -Crosser; Peugeot 4007 (door speaker, except “Audios 3” and “Multivision”)
• product codes: 8720A017; 6562r8; 1612537280
• Other numbers: Not specified

This OEM-style tweeter (high-frequency speaker) is designed as a direct replacement for many Citroën and Peugeot audio systems. Ideal for professional workshops and competent DIY mechanics, the unit restores clear treble response, improves vocal intelligibility and brings back the detailed soundstage lost when original tweeters fail. The part is referenced under numbers 9661235980 and 6562C7 and is commonly searched by these codes.

Compatibility And Fitment

Compatible With Many Models Including:

• Citroën C4 Picasso
• Citroën C5
• Citroën C8
• Citroën Xsara Picasso
• Peugeot 307
• Peugeot 807

Location And Fitment Notes: The tweeter position varies by model — commonly mounted in the A-pillar, dashboard corner or front door upper trim. Fitment may require removal of the door card or dash trim depending on the vehicle. This unit is intended as a plug-in replacement for original factory connectors and mounting points on the listed models.

Technical Information

• Manufacturer: Stellantis / Citroën / Peugeot (OEM)
• Model: Front Tweeter / High-Frequency Speaker
• Product Codes: 9661235980, 6562C7
• Additional Numbers: 9633355780

Installation Recommendations

• Recommended Tools: Trim removal tools, small screwdriver set (Phillips/Torx may be required), panel clips tool, and a multimeter for quick continuity checks.
• General Procedure: Remove the relevant trim panel or door card to access the tweeter, disconnect the speaker connector, remove retaining clips or screws, fit the new tweeter, reconnect and test the speaker before reassembling the trim. Refit panels carefully to avoid breaking plastic clips.
• Estimated Time: 15–45 minutes per side depending on model and experience.
• Safety: Disconnecting the battery is recommended as a general safety precaution when working on interior electrical components to prevent short circuits or accidental airbag deployment. Follow manufacturer trim removal procedures to avoid damage.

Most Common Failure Reasons

Tweeters typically fail due to age-related wear, heat and humidity exposure, water ingress from leaks, or mechanical damage caused during door or trim repairs. Audible symptoms include distortion at high frequencies, intermittent sound, or complete loss of output on one channel. In systems with amplified outputs, overdrive or clipping from an aftermarket amplifier can also damage the tweeter diaphragm or voice coil.

Why Choose This Replacement

Replacing a worn or damaged tweeter with a correct-code unit (9661235980 / 6562C7) restores the factory audio balance and avoids cross-talk and distortion associated with mismatched aftermarket components. The OEM-compatible fit reduces installation time and ensures proper connector and mounting alignment for a professional result.