This electric power steering pump is a direct-fit replacement option for a range of Stellantis MPVs and light commercial vehicles. It restores hydraulic assistance to the steering system using an electric drive, improving low-speed maneuverability and steering comfort. The unit is commonly searched by part number (A5095965+C, 1400752580, 4007NJ, 1680897380), which makes it easy for workshops and DIY mechanics to find the correct item for Citroën and Peugeot models.

Features

• Electric-driven hydraulic pump designed for power-assisted steering systems.
• Supplied with a short length of wiring to aid installation.
• Fits multiple Citroën and Peugeot models—suitable as a replacement for the listed part numbers.
• Suitable for professional workshops and experienced DIY mechanics familiar with steering system servicing.

How It Works And What It Does

The pump provides hydraulic pressure to the steering system when assistance is required, especially at low speeds or during parking maneuvers. An electric motor drives the hydraulic pump, so steering assistance is available even when engine RPM is low. Proper function ensures lighter steering effort, improved vehicle control and reduced driver fatigue.

Replacement Procedure (Overview)

• Park vehicle on level surface, engage parking brake and disconnect the negative battery terminal to avoid electrical faults.
• Raise vehicle if necessary and remove protective covers to access the pump. Support the steering rack if required to relieve hose stress.
• Carefully disconnect electrical connector and hydraulic lines. Cap or plug lines to prevent contamination and fluid loss.
• Remove pump mounting bolts and extract the unit. Compare the replacement to the removed part to confirm match of connectors and mounting points.
• Install new pump, tighten mounting bolts to manufacturer torque, reconnect hydraulic lines with new seals or crush washers as required, and reconnect electrical connector.
• Refill the system with the manufacturer-recommended power steering fluid, then bleed the system according to factory procedure (centre the steering wheel, cycle steering slowly lock-to-lock, operate pump as required while monitoring fluid level and air removal).
• Check for leaks, verify steering operation at idle and during a short test drive, and re-check fluid level after final bleed.

Typical Lifespan And Service Intervals

Service life depends on vehicle use and maintenance. Units can last many years in normal use, but high-mileage or vehicles exposed to contamination, water ingress or extreme temperatures may require earlier replacement. Regular inspection of fluid condition and hoses helps extend pump life.

Installation Recommendations

• Use only the manufacturer-recommended power steering fluid—do not mix fluids of unknown specification.
• Replace sealing washers or O-rings on hydraulic connections to avoid leaks.
• Prevent contamination: cap lines immediately after disconnection and keep the system clean during installation.
• After fitting, follow a proper bleeding procedure and perform a test drive to confirm correct operation. Retorque fittings after the first road test if necessary.
• If electrical connector shows corrosion, clean or replace the connector to ensure reliable motor supply.

Most Common Failure Reasons

• Electrical Motor Wear Or Brush Failure: Internal motor components can wear over time, leading to reduced or no pump operation.
• Seal Or O-Ring Leakage: Degraded seals allow fluid loss and air ingress, causing noisy or ineffective steering assistance.
• Contaminated Or Degraded Fluid: Dirt, metallic particles or degraded fluid accelerate internal wear and can block valves.
• Connector Corrosion Or Wiring Damage: Poor electrical supply from corroded plugs or damaged wiring prevents motor operation.
• Bearing Or Mechanical Wear: Internal bearings may fail, generating noise and eventual seizure of the pump.

Technical Information

• Manufacturer: Stellantis / Citroën / Peugeot
• Model: Citroën C8, Jumpy 2; Peugeot 807, Expert 2
• Product Codes: A5095965+C, 1400752580, 4007NJ
• Other Numbers: 1680897380

This description is intended to help identify compatibility and installation needs. Search by part number for the fastest match when ordering replacement steering pumps for the listed Citroën and Peugeot models.

Discover this high-quality HPI power steering pump, designed specifically for Citroën and Peugeot models including C8, Jumpy II, 807, and Expert II. This crucial component ensures your vehicle’s steering remains smooth and precise, contributing directly to safe and comfortable driving.

The pump comes fully functional and includes a portion of the necessary wiring harness, simplifying the installation process. It serves as a reliable replacement part for mechanics and DIY enthusiasts looking for an economical alternative to new components without compromising performance or durability.

Technical Information

• Manufacturer: CITROËN, PEUGEOT
• Model: Citroën C8, Jumpy II | Peugeot 807, Expert II
• Product Codes: A5095965+H, 1401440980, 1680897380, 4007XR
• Additional Numbers: 4007XR

Installing this power steering pump is straightforward thanks to the included wiring harness. Its compatibility with the listed models guarantees dependable operation and restores smooth, accurate steering control. Regular wear over time or leaks can lead to diminished steering performance, making timely replacement essential for maintaining vehicle safety.

Do not underestimate the importance of a quality power steering pump for your vehicle’s handling and safety. If you have any questions or require additional information, feel free to contact us.

Order this essential electric power steering pump now to ensure your vehicle continues to deliver optimal performance in all driving conditions!

Technical Information:
Manufacturer: PSA Citroën Peugeot
Model: Citroën C8, Jumpy II; Peugeot 807, Expert II
Product Codes: A5095965+G, 1401314780, 4007VF
Other Numbers: Supplied with a piece of wiring

Let your car steer smoothly again with this quality power steering pump. Its important function is to facilitate steering control, which is crucial for safe driving and comfort. The power steering pump is one of the key components that, if not functioning properly, can lead to stiff steering and increase the effort required to steer. Therefore, it is essential to ensure that this part is in excellent condition and functional. Our product guarantees that for you.

As electrical components, power steering pumps are vital for enhancing your vehicle’s handling capabilities. Over time, these pumps can wear out due to factors like heat, fluid contamination, and mechanical wear, leading to steering difficulties. Regular inspection and timely replacement of your power steering pump can prevent further complications and maintain optimal vehicle performance.

Installation of the Electric Power Steering Pump is straightforward, usually involving disconnection of the old unit and connecting the new pump with the provided wiring harness. It is advisable to have a professional mechanic perform the replacement if you are not familiar with automotive systems.

Technical Information

• Manufacturer: Peugeot
• Model: 308
• Product Codes: 9684979180
• Other Numbers: 4007WC

The replacement of the rear lid electric motor is straightforward. It typically requires basic tools and can be accomplished in a short time. Regular wear and tear can lead to failure, so it’s advisable to check the motor condition during routine maintenance. Factors such as moisture exposure and mechanical stress can cause the motor to malfunction.

The electric motor plays a crucial role in the automatic opening and closure of the rear lid, providing convenience and ease of access to the trunk space. With this durable replacement part, you can restore your vehicle’s operational capabilities.

Technical Information

• Manufacturer: STABILUS
• Model: PEUGEOT 607
• Product Codes: 9648047380, 8735J1
• Other Numbers: 8735J1, 9648047380

Due to wear and tear over time, automotive electrical components like this unit can fail. Common reasons for failure include exposure to moisture, electrical surges, and general usage. It is advisable to replace this unit if you experience issues with the rear lid not opening or closing properly.

Replacing the rear lid electronic unit is a straightforward process that requires basic tools and a little mechanical knowledge. Ensure that the vehicle’s electrical system is turned off before beginning the replacement to prevent any electrical hazards.

Technical Information

• Manufacturer: PSA CITROEN PEUGEOT
• Model: PEUGEOT 607
• Product Codes: 1304019947, 8735J2
• Additional Numbers: NFP

Over time, power steering pumps can wear out due to factors such as fluid contamination, belt issues, or general wear and tear, leading to a less effective steering response. Regular checks and timely replacement are crucial to maintain optimal vehicle performance.

Technical Information

• Manufacturer: TRW
• Model: Peugeot 308
• Product Codes: 9671691980
• Other Numbers: 400847

Ensure you have the correct replacement part to keep your steering functioning at its best. This power steering pump is a reliable choice for both Citroën and Peugeot vehicles that require quality service and performance.

This essential component comes with a wiring harness, ensuring easy installation and seamless integration into your car’s electrical system.

Common failures of power steering pumps occur due to wear and tear, overheating from fluid degradation, or contamination within the system. Regular maintenance is key to prolonging the pump’s lifespan. Signs of failure include difficulty steering, strange noises, or fluid leaks.

Technical Information:

• Manufacturer: PSA CITROEN PEUGEOT
• Model: C4 Picasso, Grand Picasso
• Product Codes: 9674055680, 1606429380, 1680919880
• Other Numbers: 9674055680, 1606429380

Featuring high-quality manufacturing, this power steering pump comes equipped with a wiring harness, making installation straightforward for both professional mechanics and DIY enthusiasts. Regularly maintained, this pump enhances your vehicle’s steering ease, contributing significantly to overall driving comfort.

It is important to note that the power steering pump can experience wear and tear over time due to factors such as fluid contamination or aging components. Common signs that may indicate replacement include difficulty steering, unusual noises while turning, or a noticeable decrease in steering responsiveness.

Compatible with various Citroën and Peugeot models, this pump supports optimal steering function and enhances vehicle maneuverability.

Technical Information

• Manufacturer: TRW
• Model: Citroën C5 III X7
• Product Codes: 9633173780, 1680898480, A0025846, 4008E2
• Additional Number: 400800

Commonly referred to by the OEM part numbers 9684252580 and 4007WK, this electric power steering pump is designed to replace a faulty or worn-out unit efficiently. Regular usage can lead to wear and tear over time, making it crucial for vehicle owners and mechanics to have a reliable pump on hand for maintenance and repairs.

Installation is straightforward for those familiar with vehicle repairs; simply disconnect the existing pump and replace it with the new unit, making sure to check the power connections for a secure fit. Ensuring timely replacement of your power steering pump can prevent more significant steering issues down the line, ultimately saving you time and money.

Technical Information

• Manufacturer: PSA Citroën Peugeot
• Model: Citroën C4 Picasso, Citroën Grand Picasso (First Generation)
• Product Codes: 9684252580, 4007WK
• Additional Numbers: N/A