This electronic seat belt activation/relay unit (part numbers 9652174680 / 8914GH) is an OEM-style safety component used on various Citroën and Peugeot models, commonly fitted to vehicles such as the Peugeot 407. Designed for professional garages and experienced DIYers, the unit controls the seat belt reminder/activation circuitry and interfaces with the vehicle’s restraint systems to ensure correct belt status signalling. Replacing a faulty module restores correct seat belt warning behaviour and can clear persistent dash indications related to the belt system when combined with proper diagnostic reset.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Citroën And Peugeot Vehicles (Typical Fitment: Peugeot 407)
• Product Codes: 9652174680, 8914GH
• Additional Numbers: NFP

How To Replace

Location and removal procedure vary by model and equipment level. The unit is typically installed behind trim panels near seat belt anchor points, under the center console, or in a seat/footwell area. General replacement steps for a competent mechanic or experienced DIYer:

• Park vehicle on level ground, engage parking brake and remove ignition key.
• Disconnect the negative battery terminal and wait at least two minutes to allow any SRS capacitors to discharge.
• Remove the necessary trim panels to access the unit; keep fasteners and clips organised for reassembly.
• Unplug electrical connectors carefully, noting or photographing connector positions.
• Replace the unit with the new module, reconnect connectors and secure mounting bolts.
• Reinstall trim panels, reconnect the battery, and verify correct operation of the seat belt reminder and related indicators.
• Use a compatible diagnostic tool to read and clear any stored fault codes and confirm system status after replacement.

Installation Recommendations

• Always Disconnect The Battery Before Starting Work To Reduce Risk Of Electrical Damage Or Airbag Deployment.
• Handle Connectors And Wiring With Care To Avoid Damaging Pins Or Causing Poor Contacts.
• Inspect Wiring Looms, Grounds And Connector Pins For Corrosion Or Damage During Removal.
• After Fitment, Perform A Full System Check With A Diagnostic Tool To Confirm Proper Communication And Clear Fault Codes.
• Follow Manufacturer Torque Specifications For Fasteners And Refit All Trim Clips To Avoid Rattles Or Loose Panels.

Most Common Reasons For Failure

• Water Ingress And Corrosion: Moisture is a frequent cause of connector and module failure, especially in vehicles exposed to wet environments.
• Connector Oxidation Or Poor Contact: Intermittent electrical contact can produce fault codes or prevent correct signalling to the instrument cluster.
• Electrical Surges Or Short Circuits: Battery faults, jump-starting errors, or accessory wiring issues can damage internal electronics.
• Mechanical Damage From Accidents: Impact can damage seat belt anchorage electronics or trigger irreversible changes in the restraint system.
• Age And Thermal Stress: Over many years, solder joints or electronic components may degrade and fail.

Search By Part Number When Ordering: Buyers commonly look up this type of component by product codes 9652174680 or 8914GH. Matching the part number ensures correct fitment and reduces downtime in the workshop.

Suitable For Professional Workshops And Skilled DIYers: The unit is intended for users familiar with vehicle electrical systems and who can access the required trim and diagnostic tools. If in doubt about diagnostic procedures, consult factory service literature or a qualified technician.

Restore the cooling functionality in your Citroën or Peugeot vehicle with this high-quality three-way cooling relay complete with wiring section. This specific automotive part is an ideal choice for repairs and maintenance performed by both professional mechanics and DIY enthusiasts.

The cooling relay plays a crucial role in your vehicle’s system by regulating the power supply needed for the proper operation of the cooling fans. Failure of this relay can lead to engine overheating, potentially causing severe damage. Therefore, replacement should be carried out promptly upon noticing any signs of malfunction.

Technical Information

Manufacturer: Citroën, Peugeot
Model Compatibility: Suitable for Citroën C5, Citroën Xsara Picasso, Peugeot 3008 I, Peugeot 308, Peugeot 5008 I
Product Codes: 9662570880, 6500EJ
Additional Numbers: Specific part numbers may variably include related codes depending on the vehicle’s original age and production series.

Usage and Maintenance

This relay is designed to ensure efficient cooling fan operation, which is vital to maintaining the optimal temperature of your engine. Over time, the relay can wear out due to constant electrical and thermal stress, causing intermittent or complete failure of the cooling fan circuit.

Installation generally involves disconnecting the faulty relay and wiring harness from the vehicle’s cooling system, then replacing it with this identical part. It is recommended that the battery is disconnected during replacement to ensure safety. Proper installation restores correct cooling fan operation, preventing overheating and safeguarding engine performance.

Why Choose This Part?

Thanks to its precise fitment for specific Citroën and Peugeot models and the included wiring piece, this relay simplifies installation and guarantees compatibility. It is a practical solution for technicians and car owners seeking reliable, direct-fit replacements to maintain their vehicle’s cooling system integrity.

If you have further questions regarding compatibility or installation, please contact our technical support team for expert assistance.

Compatible with models such as Citroën Berlingo (2001 and onwards), this thermostat plays a vital role in regulating the temperature of the refrigerant in the air conditioning system. It monitors the system’s temperature and helps maintain the desired cabin temperature, enhancing the overall driving experience.

Due to the demanding environment within engine compartments, thermostats can fail over time due to wear and tear, refrigerant leaks, or contamination. Regular inspection and timely replacement of this part are recommended to prevent potential system failures and costly repairs.

Technical Information

• Manufacturer: Valeo
• Model: 73410602 6461A4
• Product Codes: 6461A4, 73410602
• Additional Numbers: Not applicable

Commonly known by part numbers 8191002, 9652711280, and 1920NK, this relay often experiences wear and may fail due to factors such as age, electrical surges, and environmental conditions. Regular inspection and timely replacement can prevent cruise control malfunction, thereby enhancing driving safety.

Replacing the cruise control relay is a straightforward task that can be performed by both professional mechanics and individuals undertaking DIY repairs. It typically involves removing the faulty relay from the vehicle’s fuse box and replacing it with the new one, allowing for a restored cruise control function in no time.

Technical Information

• Manufacturer: G. Cartier
• Model: Citroën Peugeot
• Product Codes: 8191002, 9652711280
• Additional Numbers: 1920NK

Frequent replacement of the alternator capacitor is often necessary due to aging or electrical surges that may degrade its performance over time. If your vehicle exhibits irregular electrical performance or warning lights, it may indicate that the capacitor requires replacement.

This alternator capacitor plays a crucial role in stabilizing voltage and ensuring smooth operation of the alternator. A properly functioning capacitor helps maintain efficient power supply to the vehicle’s electrical components.

Technical Information

• Manufacturer: Citroën Peugeot
• Model: Various Citroën and Peugeot Models
• Product Codes: 9656112480
• Other Numbers: 573293

This Sahara Relay from Bitron (also found fitted by Omron in some applications) with product codes 250030, 220506 and 6545XF is a practical replacement part for many Citroën and Peugeot vehicles within the PSA group. The unit is supplied with a short section of wiring to simplify installation and fast fitment. It is commonly sought by professional auto technicians and DIY enthusiasts searching by part number.

Function And Application

The relay controls and switches electrical circuits within the vehicle’s system, acting as an electrically operated switch to route power where required. Correct operation of this relay helps ensure reliable performance of the affected circuit. Compatibility includes models such as Citroën C5 X7 and other PSA-platform vehicles where the listed part numbers apply; always verify fitment against your vehicle’s part number list.

Installation And Replacement

General replacement guidance: disconnect the negative battery terminal before starting work. Locate the relay in the engine-bay or under-dash relay/fuse box according to the vehicle manual. Remove the electrical connector and any retaining clip, swap the old relay for the new unit and connect the supplied wiring section if required. Reconnect the battery and verify the function of the circuit controlled by the relay. If you are unsure of the exact location or wiring, consult the vehicle service manual or a qualified technician.

Common Faults And Longevity

Relays can fail due to contact wear, corrosion, overheating, moisture ingress or wiring faults. Symptoms of a failing relay include intermittent operation of the controlled system, complete loss of function, or unusual electrical behaviour. There is no fixed replacement interval; service life depends on usage, environment and system electrical health. Diagnosing the fault before replacement helps prevent repeat failures caused by wiring or control module issues.

Why Choose This Part

Buying this Sahara Relay offers a cost-effective way to restore proper electrical control in compatible Citroën and Peugeot models. The presence of the wiring stub reduces installation time and helps ensure a secure connection. The product is suitable for workshop use and competent DIY repairs, especially when customers search by the exact part numbers provided.

Technical Information

• Manufacturer: Bitron, Omron
• Model: Citroën C5 X7
• Product Codes: 250030, 220506, 6545XF
• Other Numbers: 220506C CITROEN PEUGEOT

Description

This cooling relay with a short length of wiring is designed for Citroën and Peugeot models and is commonly used to control engine cooling fan circuits. It is often searched by OE numbers and fits a range of Stellantis vehicles. The compact three-way design allows switching of multiple circuits or fan speed stages, making it suitable for systems where more than one fan or speed setting is controlled from a single relay assembly. Ideal for professional workshops and DIY mechanics looking for a direct replacement part identified by part numbers.

Benefits

• Direct fit to compatible Citroën and Peugeot relay boxes when matching part numbers.
• Includes a piece of wiring to simplify connection or adaptation during installation.
• Reliable switching for cooling fan circuits when installed and connected correctly.
• Frequently found and referenced by OE numbers, improving findability during repairs.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Citroën Berlingo B9; Citroën Berlingo III; Citroën C4 Picasso; Citroën C5; Peugeot 207; Peugeot Partner III; Peugeot Partner Tepee
• Product Codes: 9652021180, 9652021280, 9662570980, 6500EJ
• Additional Numbers: 6500e, 6500EJ, 9652021180, 9652021280, 9662570980

How To Replace

Replacement is straightforward for experienced technicians and competent DIY mechanics:

• Ensure Ignition Off And Battery Disconnected Before Work.
• Locate The Relay In The Engine Bay Fuse/Relay Box Or Under Dashboard According To The Vehicle.
• Unplug The Electrical Connector And Remove Any Retaining Clips Or Screws. If The Part Includes A Short Wiring Pigtail, Note Connector Orientation And Secure New Connections With Proper Crimps Or Solder And Heatshrink.
• Install The New Relay In The Same Position, Reconnect Wiring, Refit Covers, And Reconnect Battery.
• Verify Operation By Running The Engine To Operating Temperature And Checking Fan Operation And AC-Related Fan Stages.

Installation Recommendations

• Disconnect The Negative Battery Terminal Before Starting Work To Prevent Short Circuits.
• Use Proper Tools For Electrical Connections: Quality Crimps, Soldering And Heatshrink Where Appropriate.
• Protect Connectors From Water And Corrosion With Dielectric Grease If Exposed To The Elements.
• Check Fan Motor Current Draw Before And After Replacement If Relay Failure Was Caused By An Overload Condition.
• Secure Any Supplied Wiring To Avoid Chafing And Heat Damage Near Exhaust Components.

Most Common Failure Reasons

• Corrosion And Moisture In Connectors Leading To Poor Contact Or Intermittent Operation.
• Overheating Or Thermal Stress From High Current Draw (Often Caused By A Failing Fan Motor Or Shorted Circuit).
• Mechanical Wear Of Internal Contacts After Many Switching Cycles.
• Physical Damage To Wiring Or Connectors From Vibration, Road Debris, Or Improper Routing.

Notes For Buyers

Customers commonly search using OE numbers—make sure your part numbers match the ones listed above. This relay is intended as a direct replacement when part numbers correspond; fitment should be confirmed by comparing the relay housing and connector type with the unit being replaced.

This 3-way cooling relay is designed for PSA vehicles (Citroën & Peugeot), part numbers 9652021180, 9652021280, 9662570980, 6500EJ. Ideal for professional mechanics and competent DIYers who need a reliable relay to control radiator fan operation and prevent engine overheating.

Features

• Three-way relay for coolant fan control and related circuits
• Direct replacement for PSA part numbers listed above
• Robust construction to withstand engine bay conditions
• Simple plug-and-play installation in the vehicle fuse/relay box

Technical Information

Manufacturer: PSA (Citroën, Peugeot)
Model: Citroën C5
Product Codes: 9652021180, 9652021280, 9662570980, 6500EJ
Additional Numbers: 6500EJ

Compatibility And Fit

The relay is commonly used on Citroën C5 and other PSA models that accept the part numbers listed. Always verify fitment using the product codes or your vehicle’s VIN before ordering.

Installation Guide

Replacement is straightforward: disconnect the battery, locate the relay in the engine bay fuse/relay box, unplug the electrical connector, remove the old relay and install the new unit. No special tools are typically required. After installation, reconnect the battery and verify proper fan operation and cooling system response.

Common Failure Modes

Cooling relays fail due to exposure to heat and moisture, electrical overloading, corrosion of contacts or coil burnout. Symptoms include non-operational radiator fan, intermittent fan operation, or engine overheating. Check related fuses, wiring and connectors when diagnosing.

Why Buy This Relay

This part provides a cost-effective solution for restoring proper cooling fan control on compatible PSA vehicles. It has been inspected to meet functional expectations and is suitable for installation by trained mechanics or experienced DIY technicians.

Used three-way cooling relay for Citroën & Peugeot vehicles (PSA). An ideal, cost-effective replacement for mechanics and DIY enthusiasts who need to restore reliable fan control or repair the cooling system electrical circuit. Matches the listed PSA part numbers for direct fitment.

Key Features

• Direct fit for specified PSA part numbers for easy replacement
• Controls radiator cooling fans to regulate engine temperature and prevent overheating
• Suitable for under-hood use and common engine bay environments
• Carefully removed from a donor vehicle and thoroughly tested before listing

Why Relays Fail & How Often

Relays commonly fail due to aged or pitted contacts, repeated heat cycling, corrosion, moisture ingress, or electrical surges. There is no fixed replacement interval; failures often occur after many years in service or when intermittent fan operation, overheating events or electrical faults appear.

Replacement Guide

This relay can be replaced by a competent DIYer or a professional mechanic. Typical replacement steps:

1. Disconnect the negative battery terminal for safety.
2. Locate the relay in the engine bay fuse/relay box (consult the vehicle handbook for exact location).
3. Compare part numbers printed on the relay to ensure correct fitment, then pull the old relay straight out of its socket.
4. Install the replacement relay, secure the cover and reconnect the battery.
5. Start the engine and verify fan operation at idle and under load; check for error codes if applicable.

Use basic hand tools, avoid forcing connectors, and protect against short circuits while working.

Compatibility

Suitable for select Citroën C3 Picasso and Citroën C5 models and other PSA vehicles that use the listed part numbers. Always verify fitment by comparing product codes on your original relay before installation.

Technical Information

• Manufacturer: PSA Group
• Model: Citroën C3 Picasso, Citroën C5
• Product Codes: 9662570880, 6500EJ
• Other Numbers: 9652021180, 9652021280

Buy With Confidence

Purchase this used PSA cooling relay to restore reliable fan control and help prevent engine overheating. If you are unsure about fitment, contact us with your vehicle identification number (VIN) and the part numbers printed on your existing relay for confirmation.

The Multifunction Relay G. Cartier 03 730 is a reliable electrical component designed specifically for Citroën and Peugeot vehicles under the PSA Group. It manages multiple electrical functions within the vehicle’s systems, ensuring smooth operation of auxiliary components such as lighting, wipers, and other electronic circuits.

This relay is a common replacement part sought after by professional auto mechanics and enthusiasts performing their own car repairs. It is especially useful when electrical malfunctions such as intermittent lighting failures or wiper issues arise, which often indicate relay wear or failure over time.

Function and Replacement

The relay controls several critical electrical functions by receiving signals from the vehicle’s control units and distributing power accordingly. Over time, relays can degrade due to mechanical wear or electrical contact corrosion, leading to poor vehicle performance or electrical faults. Replacement is generally straightforward: the faulty relay is unplugged from its socket in the fuse box and replaced with the new part, usually without the need for special tools.

Regular inspection is recommended, especially if your vehicle shows signs of malfunctioning electrical components. Timely replacement can prevent downtime and increase vehicle reliability.

Technical Information

• Manufacturer: G. Cartier
• Model: Suitable for multiple Citroën and Peugeot models under the PSA Group
• Product Codes: 03 730, 03730
• Additional Numbers: Compatible with various PSA part numbers and electrical systems