Over time, sunshade controls may wear out due to frequent use or exposure to heat and sunlight, leading to difficulties in operation. Regular replacement is recommended to maintain the functionality of your vehicle’s sun protection system. This part is particularly useful for car technicians and DIY enthusiasts who wish to keep their Citroën or Peugeot vehicles in top condition.

Technical Information

• Manufacturer: Citroën
• Model: C5 X7
• Product Codes: 96627830BJ
• Additional Numbers: 6490F4

The product is compatible with various Citroën and Peugeot models, making it a versatile choice for auto mechanics and DIY car enthusiasts. Its reliable performance ensures that you can enjoy uninterrupted use, as the sunshade plays a crucial role in maintaining your vehicle’s interior climate and protecting passengers from excessive glare.

When it comes to replacement, the Sunshade Console Control is easy to install, typically requiring basic tools and minimal mechanical experience. Regular inspection of this component is advisable, as wear and tear can occur due to environmental factors and frequent usage, which may lead to malfunctioning controls.

Technical Information

Manufacturer: PSA

Model: Citroën C4 Grand Picasso

Product Codes: 96590657BJ, 649039

Additional Numbers: 649039

The Sunroof Shade Switch (also listed under part numbers 9643384977 and 6554L2) is a direct-fit control switch for the retractable sunshade on Peugeot 307 SW models. Designed for professional workshops and DIY mechanics, this switch restores reliable opening and closing of the interior sunblind and integrates with the original roof control cluster. Frequently searched by its product codes, this unit is an efficient replacement when the sunshade stops responding or operates intermittently.

This switch is ideal for technicians who need a fast, OE-compatible replacement without complex modifications. It offers the same user interface as the original control, straightforward installation, and immediate functional restoration once mounted and connected properly.

Technical Information

• Manufacturer: Stellantis / Peugeot
• Model: Peugeot 307 SW
• Product Codes: 9643384977, 6554L2
• Other Numbers: NFP (as marked in supplier note)

Compatibility

Fits: Peugeot 307 SW (estate) equipped with a retractable interior sunshade. Commonly referenced in parts searches by the above product codes. Verify that the vehicle uses a roof-mounted sunshade switch as pictured in manufacturer diagrams before ordering.

Installation Recommendations

• Always disconnect the vehicle battery before starting work to prevent short circuits and accidental operation.
• Remove the overhead console or trim panel carefully using appropriate trim tools to avoid damaging plastic clips or headliner fabric.
• Disconnect the electrical connector from the old switch, note connector orientation, and avoid pulling on wiring harnesses.
• Install the new switch by aligning clips and connectors, then test sunshade operation before reassembling the trim.
• After installation, verify smooth travel of the sunshade and check for any unusual noises or binding; correct routing of the shade and cables is essential for long-term reliability.

Why This Part Fails Most Often

• Mechanical Wear: Frequent use causes wear of internal micro-switches and moving components, leading to intermittent or failed operation.
• Contamination and Moisture: Dust, grime, or water ingress from roof leaks can corrode contacts or jam the mechanism.
• Electrical Issues: Loose connectors, corroded pins, or wiring harness damage can interrupt power or signal to the switch.
• Physical Damage: Impact to the overhead console or improper removal can break the switch housing or mounting clips.

Replacing the switch typically restores normal function when the fault is limited to the control unit itself. If issues persist after swapping the switch, inspect the sunshade motor, guide rails, and wiring for mechanical blockages or electrical faults.

Notes For Professionals And DIY Mechanics

Searchable part numbers (9643384977, 6554L2) increase findability in parts catalogs and online searches. Keep replacement hardware and trim clips on hand for a smooth repair. For intermittent electrical faults, use a multimeter to check continuity and power at the connector before and after replacement.

High-quality replacement sunshade control switch designed for the Peugeot 307 SW panoramic/retractable roof. Ideal for professional workshops and experienced DIY mechanics who need a reliable control for opening and closing the sunshade and retractable roof. This unit is commonly referenced by part numbers 96441520XT, 9644152077 and 6554L2, so searching by those codes will quickly locate the correct item for vehicles equipped with an electric sunroof.

This switch operates the sunshade and retractable roof functions, sending the driver’s commands to the roof motor via the vehicle’s wiring harness. The component is a direct-fit electrical control mounted in the overhead console or roof headliner and replaces worn or non-responsive switches to restore proper operation of the sunroof and sunshade mechanisms.

How To Replace

Replacement is straightforward for a competent mechanic or experienced DIYer with basic trim tools. Typical steps:

• Disconnect the battery before starting work to avoid short circuits and accidental deployment of safety systems.
• Carefully remove the overhead console or the light/switch bezel according to the vehicle trim removal procedure.
• Unclip the faulty switch from its housing and disconnect the electrical connector(s).
• Install the new switch by plugging in the connector, securing the switch in the bezel, and reassembling the overhead console.
• Reconnect the battery and test all sunroof and sunshade functions for correct operation.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Peugeot 307 SW (estate) – for vehicles equipped with an electric retractable/panoramic sunroof
• Product Codes: 96441520XT, 9644152077, 6554L2
• Additional Numbers: NFP

Recommendations For Installation

Always disconnect the battery before removing interior trims or electrical components. Use appropriate trim tools to avoid damaging the headliner and plastic fittings. Inspect the connector pins and wiring for corrosion or damage before installing the new switch; clean contacts if necessary and ensure a firm, correct mating when reconnecting. After fitting, verify all positions and safety functions of the sunroof and sunshade. If the roof motor or limit switches previously failed, confirm their correct operation to prevent reoccurrence.

Why This Part Most Often Fails

• Wear Of Internal Contacts: Frequent use causes contact wear or intermittent electrical connection.
• Moisture Ingress: Water leaks from the roof can corrode connectors and switch internals.
• Mechanical Damage: Plastic buttons or mounting clips can break during operation or removal.
• Electrical Faults: Short circuits or wiring faults in the roof harness can cause switch malfunction.

Searching by the listed product codes (96441520XT, 9644152077, 6554L2) is the fastest way to find the exact replacement. This switch is a practical, cost-effective repair that restores convenience and proper function to the Peugeot 307 SW sunroof system.

This folding roof controller (roof switch/controller) is a direct-fit replacement for Peugeot 307 CC models equipped with an electric folding roof. Ideal for workshops and DIY mechanics who need a reliable control unit with OEM reference 6554X1. As a used part it may show cosmetic wear but restores reliable roof operation when the original wall switch or controller has failed.

Technical Information

• Manufacturer: Stellantis (Citroën/Peugeot)
• Model: Peugeot 307 CC
• Product Codes: 6554X1
• Additional Numbers: NFP

Compatibility

Compatible With Peugeot 307 CC (Coupe-Cabriolet) models equipped with the factory electric folding roof mechanism. Check vehicle equipment level and connector type before installation.

Function

The unit controls the folding roof sequence: it receives inputs from the roof position sensors and switch, manages motor/actuator commands, and coordinates lock/unlock and hydraulic/electric roof movements. Proper operation ensures safe, sequenced opening and closing of the roof without binding or partial movement.

How To Replace

1. Park vehicle on a level surface and ensure ignition is off.
2. Disconnect the negative battery terminal before starting work to avoid short circuits and electrical damage.
3. Remove the interior trim pieces surrounding the roof switch (typically trim panels in the roof console or center console) to access the controller/switch.
4. Disconnect the electrical connector(s) and remove the retaining screws/clips holding the controller in place.
5. Install the replacement unit, secure fasteners, reconnect the connector(s) and reassemble trim.
6. Reconnect the battery and perform a roof function test: verify full open/close cycle and correct locking/unlocking sequence.

Installation Recommendations

• Always Disconnect The Battery Before Removal Or Installation To Prevent Damage To The Unit.
• Inspect Connectors And Wiring For Corrosion Or Damage; Clean Contacts If Necessary.
• Lubricate Mechanical Linkages And Hinges According To Manufacturer Specification To Reduce Load On The Controller.
• Test The Full Roof Cycle After Installation; If The Roof Behaves Irregularly, Recheck Connections And Fuses/Relays Related To The Roof System.
• Use Appropriate Trim Tools To Avoid Breaking Plastic Clips When Removing Interior Panels.

Most Common Reasons For Failure

Failures Typically Result From Normal Wear And Tear On Switch Contacts, Water Or Moisture Ingress Causing Corrosion, Mechanical Stress From Stiff Or Damaged Roof Linkages, Or Faulty Wiring/Connector Issues. Intermittent Operation Or Complete Loss Of Roof Control Are Common Symptoms. In Some Cases, Faulty Sensors Or Motor Overload Can Cause The Controller To Stop Responding.

Note: This item Is A Used Part And May Show Signs Of Use. It Is Supplied As Seen And Intended As A Cost-Effective Replacement For Faulty Roof Control Units.