This direct-fit seat heating switch is designed for Stellantis vehicles under the Citroën and Peugeot brands and is commonly searched by part numbers 96619006XT, 8906HR, 8906EF and 892555. Suitable for professional workshops and DIY mechanics, the unit restores user control over seat cushion heating levels and improves cabin comfort on cold days.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Citroën C5 X7; Peugeot 207; Peugeot 308 T7; Peugeot 3008 I; Peugeot 5008 I; and Other Models
• Product Codes: 96619006XT; 8906HR; 8906EF
• Other Numbers: 892555

Function And Benefits

The switch controls power delivery to the seat heating element, allowing the occupant to switch the heater On/Off and select available heating levels (dependant on vehicle specification). A working controller ensures reliable, adjustable seat warming, improved comfort, and proper interaction with the vehicle’s HVAC and safety systems.

Installation Recommendations

• Disconnect Battery Negative Before Work To Avoid Short Circuits.
• Use Trim Removal Tools To Remove Surrounding Trim Without Damage.
• Access The Switch By Releasing Clips Or Removing Fasteners (Screw Or Torx Depending On Model).
• Unplug Electrical Connector And Remove The Old Switch; Inspect Connector Pins For Corrosion Or Damage.
• Fit The New Switch, Reconnect The Connector And Test Functionality Before Reassembling Trim.
• Typical Replacement Time: Approximately 15–40 Minutes For A Single Seat, Depending On Model And Trim Complexity.
• Recommended Tools: Trim Pry Tools, Screwdriver Or Torx Set, Multimeter For Quick Voltage/Continuity Checks.

Common Failure Reasons

• Wear And Contact Degradation: Mechanical switches and internal contacts deteriorate after many cycles, causing intermittent or loss of function.
• Moisture And Contamination: Spills or moisture ingress Can Corrode Contacts Or Short Internal Electronics.
• Connector Or Wiring Issues: Corroded Pins, Broken Wires Or Poor Connections In The Harness Lead To Faults.
• Thermal And Electrical Stress: Overcurrent Conditions From A Faulty Seat Heating Element May Damage The Switch Electronics Or Contacts.
• Mechanical Damage: Excessive Force Or Impact During Use Or Removal Can Break Switch Components.

Symptoms Of A Failing Unit Include No Heating, Intermittent Operation, Stuck Settings Or Unlit Indicators. Before Replacement, Inspect Fuses And Wiring For Visible Damage; the switch is often the part that gets replaced when control or user interface fails.

Part numbers Are Frequently Used As Search Terms By Professionals And DIY Enthusiasts—entering 96619006XT, 8906HR, 8906EF Or 892555 Will Quickly Identify This Component. Order this direct-fit replacement to restore reliable seat heating control and passenger comfort.

This Seat Heating Controller is a direct-fit control unit designed for heated seat cushions on selected Citroën and Peugeot vehicles. Ideal For Professional Technicians And DIY Enthusiasts, The Switch Allows Reliable Adjustment Of Seat Cushion Temperature And Replaces Faulty Or Worn Original Units. The Part Is Commonly Searched By Its Product Numbers, Making It Easy To Find For Fast Repair Or Service Jobs.

The Controller Regulates Power To The Seat Heating Element, Providing Several Heat Levels (Depending On Vehicle Configuration) And Restoring Comfortable Seat Warming Functionality. It Is Suited For Use In Workshop Replacements During Interior Repairs Or When Diagnosing Cold Seat Complaints. Installing A Correctly Matched Controller Eliminates Faulty Switch Behavior, Intermittent Heating, Or Complete Loss Of Seat Warmth.

Technical Information

• Manufacturer: Stellantis
• Model: Citroën C5 X7, Citroën C8, Peugeot 207, Peugeot 308 T7, Peugeot 807 (And Other Compatible Models)
• Product Codes: 96618990XT, 96500377XT
• Other Numbers: 8906HR, 8906EF, NFP

How To Replace

Replacement Is Straightforward For A Mechanic Or Experienced DIYer: Disconnect The Vehicle Battery First. Remove The Seat Trim Or Console Panel To Access The Switch Assembly. Unclip Or Unscrew The Switch From Its Mounting, Carefully Disconnect The Electrical Connector, And Swap In The New Controller. Reconnect The Connector, Refit Trim, Reconnect The Battery, And Verify Function Across All Heat Settings.

Installation Recommendations

Work With The Battery Disconnected To Prevent Short Circuits. Use Trim Tools To Avoid Damage To Interior Panels. Check The Wiring Harness And Connector Pins For Corrosion Or Loose Contacts Before Installing The New Unit. If Connector Damage Or Wiring Faults Are Present, Repair Those Issues To Ensure Long-Term Operation. After Installation, Test Each Heating Level And Confirm That Any Seat Temperature Safety Cutouts Reset Correctly.

Why This Part Commonly Fails

The Most Frequent Causes Of Failure Include Contact Wear Inside The Switch From Repeated Use, Moisture Ingress Causing Corrosion Or Short Circuits, Broken Or Fatigued Wiring And Connector Pins, And Thermal Stress From Overheating. Intermittent Operation Often Points To Worn Internal Contacts Or Poor Connector Mating, While Total Failure May Be Due To Internal Electrical Faults Or Damage Sustained During Seat Servicing.

Ordering By The Product Code (96618990XT / 96500377XT / 8906HR / 8906EF) Improves The Chance Of Immediate Compatibility With The Listed Models And Speeds Up Workshop Turnaround.

Upgrade Or Replace Your Vehicle’s Seat Adjustment Controller With A Direct-Fit Unit Designed For Citroën C8 And Peugeot 807. This electric seat controller operates the passenger seat adjustment functions, restoring smooth and precise movement of the seat cushion and fore/aft positioning. Commonly searched by Part Number 944931200ZL and 6554J0, this controller is a practical solution for workshops and DIY mechanics who need a reliable replacement part that fits the original mounting points and electrical connector.

Technical Information

• Manufacturer: Stellantis (Citroën/Peugeot)
• Model: Citroën C8, Peugeot 807
• Product Codes: 944931200ZL
• Other Numbers: 6554J0

Function And Application

This unit controls the electric adjustment of the passenger seat (seat cushion and positioning). It converts switch commands into motor movement and may include internal relays, potentiometers or electronics to manage position limits and speed. It is fitted under or at the side of the seat, connected to the seat motors and the vehicle wiring harness.

Replacement Procedure (Overview)

1. Disconnect The Battery Before Any Work To Prevent Short Circuits And To Protect Airbag/Safety Systems.
2. Move The Seat To A Position That Gives Access To The Controller And Fasteners.
3. Remove Seat Trim Or Covers Carefully To Reach The Mounting Location.
4. Unplug The Electrical Connector(s) From The Controller—Note Connector Orientation For Reassembly.
5. Unscrew The Mounting Bolts, Remove The Old Controller And Install The New Unit In The Same Orientation.
6. Reconnect The Electrical Connector(s), Refit Trim, Restore Battery Connection And Test All Seat Functions.

Installation Recommendations

• Always Disconnect The Battery And Wait A Few Minutes Before Starting Work To Avoid Airbag System Faults.
• Observe Connector Locking Tabs And Pin Alignment; Damaged Pins Or Poor Contact Are A Common Cause Of Malfunction.
• Ensure Mounting Is Secure And That Wiring Is Routed Clear Of Moving Parts To Prevent Abrasion.
• If Seat Occupancy Or Airbag Warning Lights Appear After Replacement, Verify Connectors And Reboot The Vehicle Systems Per Manufacturer Procedures.
• Use Basic Diagnostic Tools To Confirm Power And Ground At The Connector If The New Controller Does Not Operate.

Why This Part Fails Most Often

• Wear On Internal Potentiometers Or Switch Contacts From Frequent Use Leading To Intermittent Operation.
• Water Ingress Or Spills Into The Seat Area Causing Corrosion Or Short Circuits.
• Mechanical Damage To Gears Or Actuators Transmitted To The Controller When Motors Stall.
• Damaged Wiring Or Connector Corrosion Resulting In Poor Electrical Contact.
• Overload Conditions Caused By Jammed Seat Mechanisms Or Foreign Objects Under The Seat Rails.

Part numbers 944931200ZL and 6554J0 are commonly used when searching for compatible replacements—entering these codes in catalogs or search engines will help you find matching units quickly. Designed For Use By Professional Technicians And Experienced DIY Enthusiasts, This Controller Provides A Direct Replacement For Faulty Seat Adjustment Electronics On The Listed Models.

Over time, seat switches can become worn or malfunction due to frequent use, resulting in difficulties when adjusting the seat position. Regularly checking the functionality of this part is essential to maintain comfort while driving, especially for those who frequently use memory settings.

Replacement of the Memory Seat Switch is straightforward, making it an ideal choice for both professional mechanics and DIY enthusiasts. Simply disconnect the old switch and connect the new one to restore your vehicle’s seating adjustments.

Technical Information

• Manufacturer: PSA Group
• Model: Citroën C8, Peugeot 807 and others
• Product Codes: 6554LE
• Other Numbers: N/A

Due to regular use and exposure to temperature fluctuations, seat heater controllers can wear out over time. It’s recommended to replace this part if you notice any malfunction in the seat heating feature, as it directly affects passenger comfort. The installation process is straightforward, typically involving the removal of the seat cover to access the wiring and connector. Regular checks on this component can prevent unexpected heating issues.

Technical Information

• Manufacturer: Citroën / Peugeot
• Model: Citroën C5 and other compatible models
• Product Codes: 96618007XT
• Other Numbers: 890695

As a critical component of your vehicle’s seating system, the driver seat controller can wear out over time due to constant use, leading to malfunction. Regular checks and timely replacement can prevent issues with seat adjustments, allowing you to maintain a comfortable driving position.

Replacing the driver seat controller is a straightforward process for those familiar with automotive repairs. Make sure to disconnect the vehicle’s battery before performing the installation to ensure safety.

Technical Information

• Manufacturer: PSA Citroën Peugeot
• Model: Citroën C5 X7
• Product Codes: 96602208XT, 8898HZ
• Other Numbers: [Insert any additional relevant numbers here]

Designed for Citroën C5 X7 models, this durable electrical component is easy to install, making it a suitable choice for both professional mechanics and those who prefer to repair their vehicles themselves. Regular usage can lead to wear and tear, causing malfunctions in the switch; therefore, timely replacement is recommended to preserve comfort and functionality.

Technical Information

• Manufacturer: Citroën
• Model: C5 X7
• Product Codes: 96602210XT
• Additional Numbers: 8898JC

Over time, seat controllers may fail due to wear and tear from regular usage, making it important to replace them to maintain the vehicle’s comfort and functionality. If the seat does not adjust properly, it can lead to discomfort during drives, which is why timely replacement is essential.

Easy to install, this part is a perfect choice for both professional mechanics and DIY car enthusiasts. With proper tools, you can replace the controller in a few straightforward steps, ensuring that your passenger seat operates like new.

Technical Information

• Manufacturer: PSA
• Model: Citroën C5 X7
• Product Codes: 96602209XT
• Additional Numbers: 8898HY

In terms of durability, this seat controller may occasionally fail due to wear and tear from regular use, overheating, or electrical issues, prompting the need for replacement. If you notice inconsistencies in seat adjustments or a complete lack of function, it is time to consider a new unit.

Technical Information

• Manufacturer: PSA Citroën Peugeot
• Model: Citroën C5 X7
• Product Codes: 96602211XT
• Additional Numbers: 8898JA

Regular use of this controller can lead to wear and tear, causing it to malfunction. Symptoms may include failure to adjust the seat position or an unresponsive massage feature. Its durability makes it a reliable choice; however, if you notice any issues, timely replacement is necessary to maintain seat functionality and comfort.

Technical Information

• Manufacturer: PSA
• Model: Citroën C5 X7
• Product Codes: 96627225XT, 8898JE
• Additional Numbers: Not Provided