Product Overview

Used control switch designed for Peugeot 406 applications. This original-equipment style switch (product code 6552LW) is a direct replacement for worn or faulty door/console controllers and is commonly sought after by professional technicians and DIY enthusiasts repairing Peugeot electrical systems. The compact unit restores reliable switching functions and helps eliminate intermittent faults caused by degraded contacts or broken actuators.

Benefits And Key Features

– Direct-fit replacement for vehicles using part number 6552LW.
– Restores proper operation of the associated door/console functions (central locking and other electrical controls when applicable).
– Economical solution for extending vehicle service life without modifying wiring or mounts.
– Supplied as a used genuine part from the Stellantis/Peugeot parts family.

Technical Information

• Manufacturer: Peugeot (Stellantis)
• Model: Peugeot 406
• Product Codes: 6552LW
• Additional Numbers: NFP

Compatibility And Fitment Notes

The switch is intended primarily for Peugeot 406 applications that use the 6552LW part code. Always match the part code on the unit to the vehicle’s existing component to confirm fitment. Fitment may vary by production year and trim level; the part is commonly used where original equipment switches have the same connector and mounting arrangement.

Replacement Procedure

1) Prepare the vehicle: Park on a level surface, engage the parking brake and remove the ignition key.
2) Safety first: Disconnect the negative battery terminal to avoid short circuits and accidental actuator operation.
3) Access the switch: Remove the relevant interior trim (door card or lower dash panel) using appropriate trim tools to avoid damage to clips and panels.
4) Disconnect the electrical connector and any retaining clips or screws securing the switch.
5) Install the replacement: Fit the new switch, secure fasteners, reconnect the wiring harness and reassemble trim in reverse order.
6) Test operation: Reconnect the battery and verify all related functions (locking, unlocking, and any auxiliary features) operate correctly before finishing.

Recommended Tools And Tips

Use plastic trim removal tools to prevent scratching panels. A small Torx or Phillips driver may be required depending on vehicle trim. Clean connector pins and apply a contact protector if corrosion is present. Ensure connectors are fully seated and locking tabs engaged to avoid intermittent faults.

Why The Part Fails Most Often

Common failure causes include internal contact wear from frequent use, moisture ingress leading to corrosion, mechanical breakage of plastic components or actuator levers, and degraded solder joints from thermal cycling. Symptoms usually start as intermittent operation, sticking switches, or complete loss of the affected function.

Service Life And Maintenance

Life expectancy depends on usage and environment; many units last well over a decade in normal conditions, but coastal or high-humidity environments accelerate corrosion and wear. Regular inspection and keeping door seals in good condition will help prolong switch life.

Installation Recommendation

Perform installation in a clean, dry workspace. If connector terminals are corroded, address the corrosion before fitting the new switch. After installation, verify all related electrical systems function correctly and perform a final visual check of trim fitment and fastener security.

Original block of ESP controllers and parking sensors for Peugeot 3008 I and 5008 I. This is a used, fully functional part from the PSA concern, suitable as a direct replacement for the defective button panel in the center console.

Key part numbers (for searching and checking compatibility):
– PSA/OE: 6490.V7 (6490V7)
– Production/service: 96638425XT, 96656490ZD
– Also often searched for: control block, button panel, switch bar, ESP OFF control, parking sensor switch, center console controls

Compatibility:
– Peugeot 3008 I (approx. 2009–2016)
– Peugeot 5008 I (approx. 2009–2017)
Note: Always compare the part number and design with your original part. Button icons and internal connections may differ for some equipment versions.

Features and technical information:
– ESP/ASR control (ESP OFF button)
– Activation/deactivation of parking sensors (P)
– Location: center console (button panel under the instrument panel)
– Power supply: 12 V, original multi-pole PSA connector (plug & play)
– Construction: slide/snap module into the center console frame

Typical manifestations of the defect, which this part solves:
– The ESP OFF or P button (parking sensors) does not work
– Self-switching off/not switching on the parking sensors
– Stiff, dented or unresponsive button
– Worn pictograms or contact problems in the panel

Assembly and Coding:
– Exchange is usually plug & play; recommended to disconnect the battery before disassembly
– Usually no coding is required; with some equipment it may be necessary to check the activation of functions in the BSI (Diagbox/Lexia)
– Assembly time for an experienced mechanic: approx. 10-20 minutes

Why original used part:
– 100% fit, retains OEM quality and interior appearance
– More reliable than cheap universal replacements
– Economical and quick repair without installation modifications

Status:
– Used genuine PSA part, normal cosmetic signs of use not affecting function

Tip for the right choice:
– Compare OE number: 6490.V7 / 6490V7
– Check production codes: 96638425XT, 96656490ZD
– Verify connector shape and button layout/icon with your original part

You are searching under: Peugeot 3008 5008 control block, ESP OFF button panel, parking sensor switch, center console switch bar, 96638425XT, 96656490ZD, 6490V7.

Are you looking for quality used auto parts for your Citroën or Peugeot vehicle? Introducing the AFIL Switch, specially designed for precise control of the lane departure warning system. This part is extracted from a 2018 Citroën C3 and offers exceptional reliability and performance you expect from original Citroën parts.

This AFIL Switch is essential for maintaining the functionality of your vehicle’s safety systems. The lane departure warning system is critical for increasing safety while driving, especially on long trips or in heavy traffic, and this switch ensures its proper function.

Technical Information

• Manufacturer: Citroën Peugeot
• Model: Citroën C3 III
• Product Codes: 98127544ZD, 9812754477
• Other Numbers: This product is compatible with various years and trims of Citroën C3 III.

Usage: This part is specifically designed for the Citroën C3 III model and can be installed without needing further modifications. Installation is straightforward and can be performed personally or by your trusted mechanic. It’s recommended to check all connections and system functionality after installing the new part.

Condition: Excellent – the part has been carefully tested prior to removal and is fully functional with no significant signs of wear. A great choice for car owners looking for an effective solution to replace a part at a fraction of the cost of a new component.

If you’re looking for a reliable and verified AFIL Switch for your Citroën C3 vehicle, don’t miss this opportunity. Investing in quality used parts not only saves you money but also contributes to the safe and smooth operation of your vehicle.

Enhance your vehicle’s performance with the Automatic Transmission Controller compatible with Citroën C3 III, C3 Aircross, and Peugeot models such as 508 and 308 T9. This critical component ensures smooth operation of your vehicle’s automatic transmission system.

Replacement and Maintenance

The installation of the Automatic Transmission Controller is straightforward but requires some mechanical knowledge. It is advisable to replace this controller if you experience erratic shifting or transmission issues. Regular checks can prevent premature failure and ensure optimal performance.

Technical Information

Manufacturer: PSA
Model: Citroën C3 III, C3 Aircross, Peugeot 508, 308 T9
Product Codes: 96770535ZD
Other Numbers: 9670535ZD

Functionality

This Automatic Transmission Controller plays a crucial role in managing the transmission’s shifting patterns, allowing for smooth gear transitions and overall improved drivability. Over time, wear and tear can lead to malfunction, commonly due to electrical faults or mechanical wear. Therefore, timely replacement is essential to maintain your vehicle’s functionality.

Looking for a reliable replacement part to control the sliding doors of your Citroën C8 or Peugeot 807 vehicle? Our product, the Sliding Door Control with code 6554QR, is the perfect choice for professional mechanics and experienced DIYers who prioritize quality and precision. This control ensures smooth and hassle-free operation of the sliding doors, which is essential for the comfort and safety of your ride.

The product is specifically designed for Citroën C8 and Peugeot 807 models, fitting perfectly between them. Thanks to precise processing and specifications, this original part provides excellent functionality, guaranteeing that your vehicle’s doors will operate like new. Installation of the control is relatively easy and can be done with common tools, making it a convenient choice for a quick repair.

Technical Information:
Manufacturer: Citroën, Peugeot
Model: Citroën C8, Peugeot 807
Product Codes: 6554QR
Other Numbers: Information is not available.

So if you need a reliable and quality part for repairing sliding doors, this control is an excellent choice. Not only will it enhance the functionality of your vehicle, but it will also bring peace of mind knowing that you are using a part that is specifically designed for your car. Don’t wait until the problem worsens, and invest in quality parts today.