High-quality replacement mirror control switch designed for Citroën and Peugeot models. Ideal for professional technicians and DIY enthusiasts, this switch restores reliable electric mirror adjustment and, depending on vehicle specification, mirror folding and heating control. Commonly searched by part numbers (e.g. 6545LC, 6545F9, 6545KS), this unit fits a range of Stellantis small and compact models and offers a cost-effective way to eliminate intermittent or non-functioning mirror controls.

Features And Function

This switch provides ergonomic control of exterior mirrors: left/right selection, multi-directional adjustment of the mirror glass and, on equipped vehicles, folding and heated mirror activation. It is a direct-fit replacement intended to match the original switch’s footprint and connector arrangement for easy installation. Suitable for use by auto electricians and experienced DIY mechanics who need a dependable control interface in the driver’s door.

Replacement Procedure

Typical replacement is straightforward for a trained mechanic:

• Disconnect the vehicle battery before starting to avoid short circuits and protect vehicle electronics.
• Remove the driver door trim or switch bezel using plastic trim tools to avoid damaging clips and trim surfaces.
• Carefully unclip and pull out the old switch, then unplug the electrical connector(s).
• Compare the connector and part codes to ensure correct variant, then plug the new switch in and secure it into the door bezel.
• Reconnect the battery and test all mirror functions: left/right selection, adjustment directions, folding (if fitted) and heating (if applicable).
• Reassemble the trim panel, ensuring all clips and fasteners are correctly seated.

Installation Recommendations

• Use dedicated trim removal tools to prevent damage to panels and retainers.
• Inspect the connector for corrosion or bent pins before installation; clean contacts if necessary.
• Test the new switch function before reinserting the door panel to save time if readjustments are needed.
• Avoid excessive force when seating the switch to prevent cracking plastic housings or breaking clips.

Why This Part Fails Most Often

Mirror switches commonly fail due to age and wear of internal contacts from repeated use, moisture ingress from door seals allowing corrosion, or mechanical damage to the switch housing and actuating joystick. Intermittent function is often caused by dirty or oxidised contacts; complete failure can result from broken plastic parts or an electrical short in the switch. Addressing door water leaks and careful removal/installation helps prolong service life.

Compatibility

Typical vehicle applications include, but are not limited to:

• Citroën Berlingo B9 / Berlingo III
• Citroën C2
• Citroën C3 / C3 Pluriel
• Citroën Xsara Picasso
• Peugeot Partner III / Partner Tepee

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Driver Door Mirror Control Switch
• Product Codes: 6545LC, 6545F9, 6545KS
• Additional Numbers: 6545.F9, 6545.KS, 6545.LC, 6545F9, 6545KS, 6545LC, NFC

If the switch shows intermittent behaviour, start with a visual inspection and contact cleaning before full replacement; however, when mechanical parts are broken or electronic contacts are burnt, replacement is the recommended solution to restore full mirror functionality.

The Mirror Control Switch is a direct-fit electro-mechanical control designed for exterior mirror adjustment on Citroën Berlingo and Peugeot Partner vehicles. This used OEM-style switch is commonly searched under the part numbers 185526 and 6554L4 and is ideal for professional workshops and DIY mechanics who need a reliable replacement for a faulty mirror adjuster control. The compact ergonomic knob and integrated selector deliver precise left/right and up/down mirror positioning and, depending on vehicle trim, may interface with mirror folding or heated mirror functions.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Citroën Berlingo; Peugeot Partner
• Product Codes: 185526; 6554L4
• Other Numbers: —

Installation Recommendations

• Disconnect Battery: Always disconnect the negative battery terminal before beginning work on electrical components to avoid short circuits and accidental airbag deployment.
• Remove Door Trim: Carefully remove the door trim panel using plastic trim tools to avoid breaking clips. Locate and remove any retaining screws and unplug any electrical connectors for speakers or courtesy lights as needed.
• Replace Switch: Unclip the old switch from the door panel, disconnect the wiring harness, connect the new switch, and test mirror movement before reassembling the door trim.
• Final Check: Verify full range of mirror adjustment and any additional functions (folding/heating) while the door trim is still loose to avoid repeated disassembly.
• Professional Tools: For workshops, using a wiring diagram and a multimeter helps verify connector pinouts and power supply during diagnosis.

Common Failure Causes

Mirror control switches commonly fail due to:

• Wear Of Internal Contacts: Frequent movement wears contact surfaces, causing intermittent or no response.
• Moisture Ingress And Corrosion: Water intrusion into door cavities can corrode connectors and switch contacts.
• Physical Damage: Broken knobs or cracked housings from impact or excessive force when adjusting mirrors.
• Connector Or Wiring Faults: Damaged wiring or poor pin contacts at the harness can mimic a failed switch.

Why Choose This Part

This part is suitable for mechanics and experienced DIYers who need a direct replacement for mirror adjustment control units on Citroën Berlingo and Peugeot Partner models. Searchable by OE-style numbers 185526 and 6554L4, it helps customers quickly find the correct component. Replacing a faulty switch restores mirror adjustability and, where applicable, related mirror functions without the need for more costly door module repairs.

Tip For Diagnosis

Before replacing the switch, confirm power to the switch connector and check for continuity through the switch while actuating the knob. If wiring and power are present but operation is intermittent or absent, the switch is likely the cause.

This Mirror Control Switch is crucial for the proper function and safety of your automobile. Its main role is to allow the driver to comfortably and quickly adjust the mirrors, a key factor in ensuring good visibility while driving. Given that mirrors are often adjusted, it is important for the switch to be in excellent condition to ensure lasting reliability and functionality.

Technical Information:
Manufacturer: Original PSA Parts
Models: Compatible with Citroën C3 Aircross, Citroën Berlingo III, Citroën C-Elysée, Citroën C3 III, Citroën C4 Cactus, Peugeot 301, Peugeot Partner III, Peugeot Rifter, and other models of Citroën, Peugeot, DS, Opel, Fiat, and Toyota vehicles.
Product Codes: 96673722ZD
Additional Numbers: Not available

Compatibility with a wide range of vehicles and the high quality of this used part ensures that the restoration of your vehicle’s mirrors will be quick and effective. It is ideal for mechanics and those who prefer to carry out repairs on their own. Whether you run an auto service or are just looking for quality spare parts for your car, this Mirror Control Switch offers an affordable and reliable solution.

Are you looking for a reliable replacement mirror control switch for your Citroën or Peugeot vehicles? Our range of used auto parts offers this control switch, model 6554L6, ideal for owners of these cars who wish to ensure the functionality and comfort of their vehicle without the need to invest in a new original part.

This switch allows for easy control of the side mirrors and also features a retractable mirror function, which is particularly handy when parking in tight spaces. Thanks to these properties, the mirror control switch is one of the key components that enhances driving comfort and safety.

Technical Information:

• Manufacturer: Original PSA (Peugeot Citroën)
• Model: Citroën C2, Citroën C3, Citroën C3 Pluriel, Peugeot (compatible models)
• Product Codes: 6554L6
• Other Numbers: NFP (Replaced by product function)

This used part is intended for Citroën and Peugeot models equipped with electrically operated and retractable mirrors. Equipping your vehicle with this auto part ensures that the mirrors will provide hassle-free adjustment and folding, which is especially useful in heavy urban traffic or when parking in small spaces.

Every part we offer is thoroughly tested and verified to meet quality and functionality standards. Thanks to our careful inspection, you can be confident that even a used part will serve as a reliable and cost-effective alternative to a new part.

If you need further information or advice on compatibility, feel free to contact us. We are here to help you keep your vehicle in flawless condition.

Technical Information

• Manufacturer: PSA (Peugeot Société Anonyme)
• Models: Citroën Berlingo B9, Citroën C2, Citroën C3, Citroën C3 Pluriel, Citroën Xsara Picasso, Peugeot Partner Tepee
• Product Codes: 6490G0, 6554N8
• Other Numbers: NFP

This switch allows for easy control of the external mirror settings and vehicle flap, improving visibility and reducing the risk of accidents. Given the frequent use and importance for safety, regular inspection and potential replacement of this part is recommended. Our part meets all standards and requirements for effective functionality.

Not only do we offer a product with excellent value, but we also provide support from our experienced team, ready to assist you in selecting the right part for your vehicle. With our detailed description and technical information, you can be assured that you are ordering exactly what you need.

Ensure your vehicle is equipped with the right components and get your Mirror Control Switch for Citroën and Peugeot today!

To replace the mirror control switch, ensure the vehicle is turned off and disconnect the battery. Remove the old switch by unscrewing it from its housing, then connect the new switch and secure it in place. This straightforward process can be tackled by both professional mechanics and DIY enthusiasts alike.

Technical Information

• Manufacturer: PSA
• Model: Citroën, Peugeot
• Product Codes: 6552QA
• Other Numbers: N/A

Mirrors can become unresponsive or lose adjustment capabilities due to electrical issues, which makes this replacement crucial for maintaining safety and convenience on the road.

This mirror control switch is specifically designed for Citroën and Peugeot vehicles, including the Citroën Xantia. It allows the driver to easily adjust the position of the side rear-view mirrors from inside the car, improving safety and convenience while driving.

The switch is a critical component of the vehicle’s electrical system controlling mirror movement, and it is often sought after by mechanics and DIY enthusiasts under the product code 96162980ZL. Its durable construction ensures reliable performance and longevity under typical usage conditions.

Application and Replacement

The mirror control switch is compatible with Citroën Xantia models and several Peugeot models using PSA parts. Over time, loss of functionality can occur due to wear, electrical faults, or exposure to moisture, necessitating replacement.

Replacement involves accessing the driver’s door panel, removing the old switch carefully, and connecting the new control switch with the appropriate wiring harness. This task is suitable for experienced car owners and professional mechanics alike.

Technical Information

• Manufacturer: PSA (Peugeot Citroën)
• Model: Citroën Xantia and select Peugeot vehicles
• Product Codes: 96162980ZL
• Additional Numbers: PSA OEM numbers applicable depend on specific vehicle configuration

Replacing the Mirror Control is a straightforward process, typically requiring only basic tools. It is advisable to check the wiring and connections when installing a new unit to ensure proper functionality. Since this component is subject to wear and tear over time due to frequent usage, timely replacement is essential for maintaining optimal visibility and safety on the road.

The function of the Mirror Control is to provide the driver with the ability to efficiently adjust the angle of the side mirrors, which is crucial for safe driving. A malfunctioning mirror control can lead to limited visibility, heightening the risk of accidents.

Technical Information

• Manufacturer: PSA
• Model: Citroën, Peugeot
• Product Codes: 655425
• Other Numbers: AMP 185526

This Mirror Control Switch is designed specifically for Citroën and Peugeot vehicles, enabling effortless adjustment of side mirrors from inside the cabin. Ideal for professional auto mechanics or car owners performing their own repairs, this switch ensures precise control and improved driving safety.

Function and Application

The primary function of this switch is to electrically adjust the angle and position of the vehicle’s exterior mirrors, allowing drivers to tailor visibility to optimal levels. It is suitable for various Citroën and Peugeot models where this original equipment manufacturer (OEM) part is specified by product codes such as 6554L5 and related variants.

Replacement and Maintenance

Over time, the mirror control switch can fail due to wear on internal electrical contacts or mechanical fatigue, especially in vehicles frequently adjusting their mirrors. Signs of failure include unresponsive mirror movements or erratic adjustments. Replacing the switch typically involves removing the interior door panel to access the control socket, then unplugging the old switch and fitting the new one, a procedure accessible to skilled DIY mechanics with basic tools.

Technical Information

• Manufacturer: PSA (Peugeot Société Anonyme – PSA Group)
• Model: Compatible with multiple Citroën and Peugeot models requiring product code 6554L5
• Product Codes: 6554L5, 6545LC, 6545F9, 6545KS
• Additional Numbers: Equivalent OEM codes applicable across various compatible vehicle models

Are you looking for a reliable mirror control switch for your Citroën or Peugeot vehicle? Our mirror control switch, part number 6545KS, is an ideal choice for drivers and auto mechanics who require quality and dependability at an affordable price. This part ensures lasting performance and functionality in your vehicle.

Thanks to its straightforward installation, it can be easily replaced in place of the original switch. Proper operation of the mirror control is essential, as mirrors play a critical role in safe driving by providing a clear view of the road behind the vehicle. This switch is designed to provide comfortable and safe mirror adjustments, especially valuable in dense urban traffic.

This control switch fits models such as the Citroën C2, Citroën C3, and Citroën C3 Pluriel. These vehicle models are known for their reliability and compact design, and this mirror control contributes significantly to their overall safety and driver convenience.

Technical Information

• Manufacturer: OEM for Citroën and Peugeot
• Models: Citroën C2, Citroën C3, Citroën C3 Pluriel
• Product Codes: 6545KS, 6545LC, 6545F9
• Additional Numbers: This mirror control switch is also known under OEM numbers 6545LC and 6545F9

When replacing this control switch, it is recommended to handle it carefully to ensure the proper functioning of all related components and systems. Using parts specifically designed for your vehicle model is crucial for optimal performance.

Investing in a high-quality and reliable auto part such as this mirror control switch is not just about convenience, but most importantly, safety. Ensure your vehicle is equipped with a dependable part that supports daily driving confidence.