Part description

The AFIL PEUGEOT 308 T9 98189731ZD switch is a controller designed for functions related to Lane Driving Assistant and Parking Assistant. It is an electrical component from the category of controls and switches, which is typically solved in case of a non-functional button, an error message or when replacing a damaged control element in the interior.

When choosing, the key is to follow the product number 98189731ZD, which often coincides with the marking on the part.

Technical information

• Manufacturer: PSA Citroën Peugeot
• Model: Peugeot 308 T9
• Other numbers: not specified

Product codes

• Product codes: 98189731ZD

Installation recommendations

• Before assembly, compare the marking and connector on the original switch with the supplied part (especially number 98189731ZD).
• Proceed carefully when working with the wiring to avoid damaging the connectors, latches and surrounding plastic parts.
• After the replacement, check the functionality of the lane assist control/parking assist according to the vehicle equipment.

Reasons why the part is damaged

• Mechanical wear of the buttons (frequent use, squeezed mechanism).
• Intrusion of dirt or liquids into the switch (water, dust in the interior).
• Damage to the connector or wiring when disassembling/assembling surrounding parts.
• Electrical fault in the circuit (voltage fluctuations, short circuit) which can affect the function of the switch.

ESP controller/switch designed for Citroën C4 cars. It is used to control the function of the stabilization system (ESP) from the dashboard, typically when there is a need to temporarily change the assistance mode (e.g. when driving on a slippery surface or during service operations). A suitable solution in case of a non-functioning button, intermittent contact or mechanical damage to the original switch.

Technical information:
– Manufacturer: PSA (Citroën / Peugeot)
– Model: Citroën C4
– Product codes: 96476624XT, 454918
– Other numbers: 96476624XT

Installation recommendations:
– Before assembly, disconnect the battery (for wiring and possible errors in the control units).
– Carry out disassembly with plastic crowbars to avoid damaging the surrounding moldings and panels.
– Check the condition of the connector and wiring (oxidation, play in the pins); a bad contact can also cause malfunctions with another switch.
– After assembly, verify the function of the ESP button and indicator light on the instrument panel; it is advisable to clear any stored errors with diagnostics.

Looking for reliable replacement parts for your Citroen or Peugeot vehicle? This high-quality ESP controller is an ideal choice for Citroen Berlingo III and Peugeot Partner III models. It plays a crucial role in ensuring the proper function of the vehicle’s electronic stability program, which is essential for safe driving, especially under challenging road conditions.

This product is designed for an exact fit to guarantee full functionality of the ESP system, which assists the driver in maintaining control by limiting wheel slip during critical situations. The ESP controller has demonstrated high reliability and durability through daily use in Citroen and Peugeot vehicles.

Technical Information:

Manufacturer: PSA Peugeot Citroen
Model: Citroen Berlingo III, Peugeot Partner III
Product Codes: 98024711XT, 454942
Additional Numbers: No additional numbers provided.

This ESP controller is ready for installation and has undergone thorough inspection prior to sale. Its compatibility with popular Citroen and Peugeot models makes it suitable for professional mechanics and DIY enthusiasts seeking a dependable and verified solution for vehicle maintenance and repair.

Nothing is more important than your driving safety. With this ESP controller, you ensure your vehicle’s stability system operates like new. Purchase today to keep your Citroen or Peugeot ready for all road and weather conditions.

Looking for a reliable and high-quality part to repair the ESP system of your Citroën C4 II or DS4? Save on expenses by choosing the ESP switch available here under product code 96664234ZD. This specific component meets the essential functional requirements, providing an economical alternative to brand-new OEM parts.

This part is perfect for professional mechanics or DIY enthusiasts seeking a compatible and efficient replacement for damaged or malfunctioning ESP controls. Replacing the old switch with this unit is relatively straightforward and can significantly enhance the responsiveness of your vehicle’s ESP system.

Technical Information:

• Manufacturer: PSA Citroën Peugeot
• Model: Citroën C4 II, DS4
• Product Codes: 96664234ZD
• Additional Numbers: Not Provided

The ESP system (Electronic Stability Program) is crucial for maintaining safety during driving, especially under challenging conditions. Failure of this system can lead to a significant loss of vehicle control, making this component vital for your car. Due to its critical function, installation is recommended by professionals or according to exact manufacturer specifications.

We offer this ESP switch at a competitive price while emphasizing quality and reliability. Our parts help extend the lifespan of your vehicle and keep repair costs manageable. Remember that using such components is not only economically sensible but also environmentally friendly, as it reduces the need for new part production and minimizes waste.

High-quality ESP (Electronic Stability Program) switch designed for Peugeot 207 vehicles — a direct-fit replacement for worn or damaged traction-control buttons. Ideal for professional workshops and DIY mechanics who want a reliable, OEM-compatible control for enabling/disabling ESP/traction control. Commonly referenced by part numbers 96522785XT, 98110141XT and 454922, this switch restores dashboard control and illumination, ensuring correct feedback and safe operation of the vehicle stability system.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Peugeot 207
• Product Codes: 96522785XT, 98110141XT
• Additional Numbers: 454922

Function

The ESP switch allows the driver to manually disable or enable the Electronic Stability Program / Traction Control system and provides the corresponding dashboard indication. It completes the driver interface for vehicle stability systems and illuminates when the system status changes. Proper operation is essential for user feedback and certain driving modes.

Replacement And Installation

Replacement is straightforward for experienced technicians and competent DIYers. General steps:

• Always disconnect the negative battery terminal before starting to avoid short circuits and to protect vehicle electronics.
• Carefully remove the surrounding trim or bezel using plastic trim tools to avoid damaging dashboard panels.
• Unscrew or unclip the old switch assembly and unplug the electrical connector(s).
• Install the new switch, reconnect the connector(s) and reassemble trim pieces. Reconnect the battery and verify function: switch operation, backlighting and that the ESP/traction control status is correctly indicated on the instrument cluster.

Use basic hand tools and a non-marring trim tool set. If the dashboard includes additional fasteners or airbags in the vicinity, follow the vehicle manufacturer’s service procedures.

Typical Lifespan And Failure Modes

Service life varies with use and environment. Switches often fail after many years (commonly 8–15 years) due to frequent operation, ingress of moisture or dirt, wear of internal contacts, or failure of illumination LEDs. Symptoms of a faulty ESP switch include unresponsive button, intermittent illumination, stuck or loose actuator, and error messages related to ESP on the dashboard.

Common Causes Of Failure

• Mechanical wear from repeated presses causing contact degradation.
• Moisture ingress or contamination leading to corrosion of contacts.
• Electrical faults such as short circuits or vehicle electrical surges.
• Broken or worn mounting tabs and bezels from prior removals.

Compatibility And Notes

This switch is intended for Peugeot 207 models and is frequently searched by the listed part numbers. Verify the part number printed on the original switch before ordering to ensure fitment. After installation, check that the ESP/traction control system responds correctly and that warning lamps behave as expected.

Installation Recommendations

• Disconnect the battery before removal and follow manufacturer procedures to avoid damage to electronic modules.
• Handle electrical connectors carefully and ensure secure seating to prevent intermittent faults.
• Inspect surrounding wiring and connectors for corrosion or damage while the switch is removed.
• Test all functions after installation (button actuation, illumination, dashboard status).

Why This Part

Choosing a correct-fit ESP switch with known part references (96522785XT, 98110141XT, 454922) gives you a straightforward replacement that restores driver control and dashboard indication. Suitable for garages and experienced self-repairers who need a reliable, easy-to-install component to maintain vehicle safety functions.

Are you looking for a reliable ESP Controller for your Citroën C-Elysée or Peugeot 301? Our offer includes a used but fully functional ESP Controller with product code 96773042ZD, perfect for restoring your vehicle’s safety features. This part is crucial for the proper functioning of your car’s electronic stability system, which helps improve handling and safety during challenging driving conditions.

Interested in specific technical details? This part is originally designed for Citroën C-Elysée and Peugeot 301 models, ensuring compatibility and effective functionality. Below you will find technical information to help you determine if this part is suitable for your vehicle.

Technical Information

• Manufacturer: Original PSA
• Models: Citroën C-Elysée, Peugeot 301
• Product Codes: 96773042ZD
• Other Numbers: N/A

Get your vehicle functioning safely again with our ESP Controller. This part is essential for the proper operation of ESP functions and contributes to the overall stability of your vehicle when in use. For installation, we recommend a professional technician to ensure everything is done correctly and your safety is prioritized.

If you have any questions regarding this product or its installation, please do not hesitate to contact our support. We are here to help you keep your vehicle in a safe and high-performing condition.

Looking for a reliable ESP controller for your Peugeot 307? Our used auto part, the TRW ESP controller, is the perfect choice for those who want to maintain their vehicle’s performance without the high costs of new components. This part is specifically designed for Peugeot 307 models, ensuring compatibility and easy installation.

The ESP controller is a key element in maintaining your vehicle’s stability under challenging driving conditions. The ESP system helps control the direction of the vehicle and improves handling in situations where skidding may occur or when turning on slippery surfaces. Replacing this part may be necessary after a technical failure of the older part, which is common in vehicles with higher mileage.

Technical Information

• Manufacturer: TRW
• Model: Peugeot 307
• Product Codes: 96366695XT, 6554F4
• Additional Numbers: Replacement parts for the ESP system, specific to Peugeot vehicles.

It is also worth noting that the installation of this part is relatively straightforward. Automotive technicians and experienced DIY mechanics will appreciate that replacing the ESP controller can be done with standard tools and without the need for special equipment, saving both time and money on professional installation.

When choosing a used part, it is important to consider its origin and condition. Our ESP controller has been carefully inspected and guarantees quality, allowing you to feel confident while driving your Peugeot 307. Let your vehicle excel in reliability and safety with our verified auto part.

Product Overview

This multifunction switch block is Designed For Peugeot 308 T7 and Integrates Controls For Hazard Lights, Central Locking And ESP. Built To OEM Form, Fit And Function, It Is A Direct Replacement Part Frequently Searched By Part Numbers 9659215177, 98060429XT And 649015. The Module Provides The Driver With Centralized Switching For Safety And Convenience Functions Mounted On The Steering Column Area.

Technical Information

• Manufacturer: Stellantis (Peugeot)
• Model: Peugeot 308 T7
• Product Codes: 9659215177, 98060429XT
• Additional Numbers: 649015

Function And Advantages

The Unit Combines Several Switch Functions Into One Compact Block: Operation Of The Hazard Warning Lights, Activation Of Central Locking Commands And Interface With The Vehicle Stability Control (ESP) Systems. Replacing A Faulty Block Restores Reliable Switch Feel And Signal Integrity, Eliminating Intermittent Lighting, Non-Working Lock Buttons Or ESP Warning Signals Caused By A Damaged Control Interface. The Black Cornelie Finish Matches Standard Interior Trim On Affected Vehicles.

Typical Replacement Procedure

Recommended Steps For Removal And Installation (For Experienced Mechanics Or Skilled DIYers):

• Disconnect The Vehicle Battery Before Starting Work To Prevent Short Circuits And Airbag/System Damage.
• Remove Trim Panels Around The Steering Column Carefully, Using Trim Tools To Avoid Breaking Clips.
• Unfasten Screws/Secure Points Holding The Existing Switch Block And Gently Pull The Unit Out.
• Disconnect Electrical Connectors By Releasing Locks; Inspect Plugs For Corrosion Or Bent Pins.
• Fit The Replacement Switch Block, Reconnect Harnesses And Secure Mounting Screws.
• Reconnect Battery And Test All Functions: Hazard Lights, Central Locking, Steering-Column Switches And Any Associated ESP Indicators.
• If Fault Codes Remain, Use An OBD Diagnostic Tool To Clear Stored Errors And Confirm Proper Communication With Vehicle Systems.

Installation Recommendations

Always Follow Manufacturer Procedures When Removing Interior Trim And Working Around The Steering Column. Use Appropriate Plastic Trim Tools To Avoid Damage. Check Connector Pins For Corrosion And Clean Contacts If Necessary. After Installation, Verify All Switch Functions And Reset Any Fault Codes Using A Diagnostic Scanner If Required. Avoid Excessive Force On Clips And Tabs During Reassembly.

Why The Part Fails Most Often

Common Causes Of Failure Include Mechanical Wear Of Internal Micro Switches From Frequent Use, Contamination By Moisture Or Dust Leading To Corrosion, Broken Plastic Levers Or Tabs From Impact, And Intermittent Electrical Contacts Or Solder Joint Failures. Faults Often Present As Intermittent Operation, Stiff Or Loose Switch Feel, Non-Responsive Lock Buttons, Or ESP/Warning Light Anomalies. Addressing Wiring Or Connector Issues During Replacement Prevents Recurrence.

Notes For Buyers

This Item Is Intended For Mechanics And Experienced DIYers Who Need A Reliable Replacement Switch Block For Peugeot 308 T7. Many Customers Search By The Part Numbers Listed Above, So Check Those Codes When Looking For Compatibility. Replacement Restores Native Control Functions And Improves Safety-Related Switching Performance.

Are you looking for a reliable and high-quality auto part for your Citroën C8 or Peugeot 807? Our offer includes a used ESP switch, originally designed for the mentioned models. This part plays a crucial role in your vehicle’s electronic stability system, which is essential for maintaining control in challenging driving conditions. Ensure that your car continues to provide maximum safety and comfort with this essential component.

Technical Information
Manufacturer: PSA CITROEN PEUGEOT
Model: Citroën C8, Peugeot 807
Product Codes: 1495735077, 6554QQ
Other Numbers: N/A

This ESP switch is fully functional and ready for installation. The installation process is straightforward and hassle-free, appreciated by both professional mechanics and DIY enthusiasts. Depending on the wear level and technical state of the vehicle, we recommend having the installation performed at a professional service to ensure correct wiring and functionality of the ESP system.

With our careful selection and inspection, you can be confident that this auto part meets all required quality and safety standards. Don’t settle for cheaper alternatives that may endanger your vehicles. Invest in the proven quality that this ESP switch provides.

High-quality replacement ESP switch designed for Peugeot 206 models. This Valeo-manufactured controller (often cited under part numbers 9642781677 and 6554V1) restores manual control of the Electronic Stability Program function when the original switch is worn, damaged or unresponsive. Ideal for professional mechanics and DIY enthusiasts looking for a direct-fit unit that matches OEM mounting and electrical connections. Common search terms: ESP Switch Peugeot 206, ESP Controller 9642781677, 6554V1 ESP Button, Valeo ESP Switch.

Technical Information

• Manufacturer: Valeo
• Model: Peugeot 206
• Product Codes: 9642781677, 6554V1
• Other Numbers: 6554V1 | 9642781677

Function And Application

The switch provides the driver with manual control to enable or disable the ESP (Electronic Stability Program) feature and sends the appropriate signal to the vehicle’s stability control system. It is mounted in the dashboard or center console and interfaces with the vehicle wiring via a dedicated connector. Correct operation ensures the ESP indicator responds and the vehicle’s traction and stability systems behave as intended.

Installation Recommendations

• Disconnect The Battery Before Work: Always disconnect the negative battery terminal before removing or installing the switch to prevent short circuits and avoid damage to vehicle electronics.
• Accessing The Switch: Remove the relevant trim panels around the dashboard or center console. Use plastic trim tools to avoid damaging clips and surrounding finishes.
• Removal: Unplug The Electrical Connector And Release Any Retaining Clips. Carefully push the old switch out from behind the panel.
• Fitting The New Switch: Insert The New Unit In Place, Secure It With The Original Clips, And Reconnect The Electrical Connector Firmly.
• Post-Installation Checks: Reconnect The Battery, Verify The ESP Indicator On The Dashboard, And Operate The Switch To Confirm Proper Response. Use A Diagnostic Tool To Read/Clear Any Associated Fault Codes If Necessary.
• Extra Tip For Mechanics: Check The Connector Pins And Wiring For Corrosion Or Damage Before Installing The New Switch To Avoid Repeat Failures.

Why This Part Most Often Fails

• Mechanical Wear: Frequent Use Leads To Wear Of Internal Contacts And Switch Mechanisms.
• Contact Oxidation: Corrosion On Electrical Contacts Causes Intermittent Or Permanent Failure.
• Moisture Ingress Or Spills: Water Or Liquid Exposure Can Short Or Corrode Internal Components.
• Physical Damage: Impact Or Overforce During Operation Can Break Plastic Housing Or Internal Levers.
• Wiring And Connector Issues: Loose, Bent, Or Corroded Pins On The Vehicle Harness Can Mimic A Failed Switch.

Purchase this Valeo ESP switch (9642781677 / 6554V1) to ensure reliable replacement for Peugeot 206 vehicles equipped with ESP. Suitable for workshop fitting and straightforward DIY replacement when following the recommended safety and installation steps.